Related
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Re: Help Please, BlueAngel not booting up, not able to upgra
todixy said:
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Click to expand...
Click to collapse
Do you have activesync 4.1 installed?
And beware that windows firewall may cause some problems too.. so turn it off before you start upgrading just to be sure.
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
xykosomatik said:
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
Click to expand...
Click to collapse
I remember closing those processes when I made my first flash... but look at the wiki from TuMa 1.2 for example:
"Flash the ROM.
* If your device is not recognized, make sure you use a fresh Windows XP SP2 or Windows 2000 SP4 installation with Active Sync 4.1."
But it's also true that it may not apply in this case. Anyway.. just trying to help.
I have definitely got the blue angel. It is an O2 Xda 11s.
I have downloaded the how to flash your BA pdf by D-Two, and followed the instructions. It gets through to the stage where it's about load the software onto the phone, and then it quits saying that he phone is not the appropriate model.
device information
Operator version: PDAViet.net
ROM version: 6.01.10 VH
ROM date: 07/08/08
Radio version: 1.06.00
ExtROM: diamond (01)
RAM size: 128 MB
Flashing eyes: 32 MB
Storage size: 60.3 MB
At present I have windows mobile 6.1.
And suggestions please?
for upgrading, you use the MAupgradeut_noID.
that program avoids country id errors but it was originally made for the magician, hence MA, whereas the original BA upgrade utility is called BAupgradeut.
that is why you get that error. you have to put the device into bootloader mode before connecting it to the pc and before starting maupgradeut_noid, that way, you avoid the device id check.
make sure to follow the correct upgrade procedure, found here: http://forum.xda-developers.com/showthread.php?t=630416
These are the instructions I used;
Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled).
Put your device into Bootloader mode by pressing and holding the "Power" & "Record" buttons, and then press the Reset Button. Help me with this step
Connect the phone to the sync cable/cradle. sarcasm ahead Note: Did you see a sign out in front of this point that said: "You can flash using BlueTooth connection?" You know why you didn't see that sign? Because you can NOT FLASH using BlueTooth!
Now you can execute the installer file. (something like "MaUpgradeUt_noID")<--------------- Used This
Here is the screen just before boarding the software.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba1.png
And here is the error message.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba2.png
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Chef_Tony said:
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Click to expand...
Click to collapse
yep, you were right,,,,,,, BUT same error message;
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/xda4.png
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Chef_Tony said:
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Click to expand...
Click to collapse
Okay yes, I should have said this. I am using windows seven on a Lenovo N500 4233 32g. The problem is, trying to get hold of an XP machine. Have you tried running this programme in compatibility mode? I will have a look at your instructions and see where I get to.
Thanks for your help,
Is d-two's manual, the HTC service manual in you sig?
no, it is to be found here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
compatibility has nothing to do with it, neither has the xp mode or any virtual machine, because there must be suitable windows 7 drivers present. but i cannot help you with his tutorial, since i use windows xp for flashing and have never successfully used windows 7 for flashing.
the htc service manual in my sig is the official htc manual for hardware repairs, you can learn to disassemble the device there and have a list of spare parts
I have two PC's, one is a XP Media Center Edition. It had a virus on it and kept getting a corrupt file, so my techyish relative came and wiped the hard drive from scratch ( or so he says but it was a partial wipe) and reloaded the OS onto it. It worked fine, but then kept getting the corrupt file again. I then decided to order the recovery disks from HP, which is the computer manufactuer. They arrived and I put them in, followed the steps, and all wen well until I came to the recovery partition. It was backing everything up ( one time process only) into the recovery partition all fine and dandy until it came to a file that had to do with Microsoft Office. It stayed their for about 45 minutes backing up this file where the longest had been 10 minutes max for all the others. I looked the file up and it said it was a small 10 mb file, so I turned the computer off and went to normal without the recovery partition. Worked fine until one day something happened and I guess I needed to do the recovery again (it's been a few months since this has happened) and did all the steps, but it wouldn't take. It gets to about 4% and then dies with a BSOD and this message:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
DATA_KERNAL_INPAGE_ERROR
If this is the first time you’ve seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007A (0xE121F318, 0xC0000185, 0xBF8B6147, 0x1C610860)
*** win32k.sys – Address BF8B6147 base at BF800000, Datestamp 3b7de698
Copied it down word for word, space for space. Can anyone help me get this thing up and running again? It's now getting important.
Forgot to mention that I get the same problem each time I put the recovery disk in.
I'd recommend using a NON-Recovery Disk, but rather a Clean, Non-OEM, Windows Disk. If the issue pertains to the Kernal, it's usually unfixable without a Hard Boot of the Drive. You should do more than Re-Format.. you should delete all the partitions off of your Hard Drive with a Windows Disk, then pop in the Recovery Disks and do the OEM install.
So I need to wipe the hard drive clean again and put in another non OEM OS?
Not quite. Wipe the HDD clean with the NON-OEM Windows Disk, as most Recovery Disks do not allow you to alter the Partitions [Everything is done for you], then pop in your Recovery Disk and let it install the new Primary, and possibly the Recovery, Drives.
I see what your saying now, so what exactly happened to it?
Get Windows 7
I have windows 7, that's my other computer.
The guy at the un paso store got you too!!
At the step store? Lol.
PurpleLlamaLover said:
I see what your saying now, so what exactly happened to it?
Click to expand...
Click to collapse
When your supposed "Tech Savvy" friend attempted to fix your computer.. he, I'm assuming, did a simple "Repair" of the partition with an XP Disc. That is LITERALLY the most unwanted version of a fix ever... All it does is replace the system files, but keeps all of the other software that may have been conflicting with the system itself, BUT usually, all of the software is inaccessible. It's still on your computer, f*cking it up, but you can't see it.
Thus I always say, "If you get a bluescreen... more than once, and don't know what the code means... don't repair your computer.. re-format that b*tch after recreating the partitions."
But, if your XP compy has the specs to support Windows 7, your best bet, all in all, would be to install Windows 7. Doing so will save you the hassle of having to manually download all of the drivers for it... unlike installing a non OEM Windows XP [have to download & install the drivers manually].
PurpleLlamaLover
it sounds like the HP recovery disk could well be corrupt,
So you now have 3 options:
1. Try Linux Ubunut 10.4 LTS (Free Distro)
2. Buy a ligit copy of Windows 7
3. Download Windows Vista / 7 / XP from a torrent
and try untill you find a OS you lyk
Agent Zach said:
When your supposed "Tech Savvy" friend attempted to fix your computer.. he, I'm assuming, did a simple "Repair" of the partition with an XP Disc. That is LITERALLY the most unwanted version of a fix ever... All it does is replace the system files, but keeps all of the other software that may have been conflicting with the system itself, BUT usually, all of the software is inaccessible. It's still on your computer, f*cking it up, but you can't see it.
Thus I always say, "If you get a bluescreen... more than once, and don't know what the code means... don't repair your computer.. re-format that b*tch after recreating the partitions."
But, if your XP compy has the specs to support Windows 7, your best bet, all in all, would be to install Windows 7. Doing so will save you the hassle of having to manually download all of the drivers for it... unlike installing a non OEM Windows XP [have to download & install the drivers manually].
Click to expand...
Click to collapse
I'll try and get 7 for it. It was the last of the XP models, just before vista so i'd think it should be able to run 7. Think I need a new hard drive?
Bro that Simon_WM guys a genius. Listen to him.
Yea. This is my computer here, http://h10025.www1.hp.com/ewfrf/wc/...en&dlc=en&cc=us&product=3257746&lang=en#N1030
Think it'll run it?
PurpleLlamaLover said:
Yea. This is my computer here, http://h10025.www1.hp.com/ewfrf/wc/...en&dlc=en&cc=us&product=3257746&lang=en#N1030
Think it'll run it?
Click to expand...
Click to collapse
it may run with a lag
I just want it back up and running, I don't want vista though. On the little windows sticker is says "Vista Capable" but i've heard bad things about it, especially rom updating.
PurpleLlamaLover said:
I just want it back up and running, I don't want vista though. On the little windows sticker is says "Vista Capable" but i've heard bad things about it, especially rom updating.
Click to expand...
Click to collapse
ummm i use vista and have updated all my win mo phones on it...never had a problem
Really? Well, i'll keep in mind if I can't get XP back on it. I'd rather just have 7 and XP. I don't care what it runs as long as it runs again.
the best suggestion in this thread was install linux , however i take it that isn't a possibility. so here's what you need to do, you will require the following:
1) a fresh mind
2) a freshly burned copy of XPwhateverflavoryouwant
3) you do not care about anything on that drive.
put in freshly burned xp into computer, boot to cd drive, follow onscreen instructions, delete all partitions, create new NTFS partition, install to new partition.
if error comes back, it is not a software issue. fixing a xp bsod really is simple if it isnt hardware related.
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Sounds like you're running a 64bit Win7. That won't work! (unless mabee virtual)
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
d-two said:
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
Click to expand...
Click to collapse
Oh, yes. I remember reading it. OK, I'm getting old!
where factory apps come from - ms_.nbf -
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
you will need the stuff from this post -
http://forum.xda-developers.com/showthread.php?t=648067
install - ER2003Edit_1_4_26.msi on pc
it will enable you to be able to open the ms_.nbf
the ms_.nbf needs to be put in the same folder as
HimaUpgradeUt_noID.exe
nk.nbf
ms_.nbf
when upgrading.
the ms_.nbf is where all the old factory programs are coming from its known as the EXTROM.
it houses programs that the factory thinks that should always be installed but not uninstalled by the public, thats why they do not appear in remove programs tab.but we do not need a lot of this stuff as we are now running WM 6.5.
the ms_.nbf that is here -
http://forum.xda-developers.com/showthread.php?t=648067
has already been cleaned of any factory placed program .cabs so you can use that one straight off,it does contain 2 splash images that you could change?
its best not too have any .cabs in ms_.nbf as you will then be able to do this -
http://forum.xda-developers.com/showthread.php?t=332215
hope helps,let us know how u got on....
still having problems with update
hi advanced'
thanks for the help' what ive done was downloaded all thos programes you advised me to.
extracted them to my desktop' installed the one that opens the rom image.
opend the rom image had a look it said i was on o2 but ive unlocked it to my network orange, but i didnt change anything just save the image and came out of the programe.
then i opened windows mobile connected my xdall to it and created a new folder in games called smart, i then copy the ms file and the himaupgrade to this folder.
which ever way i try to run this ie from my windows mobile sysc, i get the same message first it says about update and delete my old software, goes through the checking stage then says update has a problem please take out usb and soft reset device and try again.
and if i try to run it from my mobile it says there is no application associated with ms_ run the application first then openthis file from within the application.
this is driving me up the wall, also i am using windows 7 might that be a problem.
many thanks
basicbri
the HimaUpgradeUt_noID.exe was never made to run on win7 that why we have too tweek.
follow this its for xp/vista but also applies for win 7 -
http://forum.xda-developers.com/showthread.php?t=428469
when all hooked up ie. device in bootloader (you cannot update in win mobile it needs to be in bootloader mode)and all ready to run, make sure u have all 3 files in same folder on desktop pc not win mobile device...
3 files are -
HimaUpgradeUt_noID.exe - update app
nk.nbf - actual win mo 6.5 rom image
ms_.nbf - extrom image
the ms_.nbf can be opened with ER2003Edit_1_4_26.msi and just delete the o2 option from the 2 drop down and type in ORANGE then go - file - save ROM image - exit
after update app has finished make sure you do this before you start up device for first time -
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.
follow the update instructions for xp on here -
http://forum.xda-developers.com/showthread.php?t=428469
even though you are running win 7 its the same,where it differs is the actual driver install,follow the guide for vista for that..
post how ya got on
thanks for your help but
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
or use the xda dev search function ???
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
basicbri said:
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
Click to expand...
Click to collapse
And i say again look in my HowTo!!!
advanced15 said:
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
Click to expand...
Click to collapse
thanks for using my version!
flyboyovyick said:
thanks for using my version!
Click to expand...
Click to collapse
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
It should not sync, to be clear.
aeroflyluby said:
It should not sync, to be clear.
Click to expand...
Click to collapse
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
If you have 32 bit windows 7 download attachment from this post http://forum.xda-developers.com/showthread.php?t=428469
unpack it anywhere but remember where it's unpacked, desktop for example.
Then put hima into bootloader mode and into crandle.
Then click on PC :
Start > Right Mouse Click on Computer > in the left you should see Device Manager link, click on this > Go to Portable Devices or something like that, there should me USB Sync or something like this > Click right mouse on it and tap Update driver > Select Browse my computer blabla > click on Let me choose someting blabla, this second option > Click DISC button > Navigate to folder where you opened this and open wceusbsh blabla > select Microsoft USB Sync or something on the list and click next > install driver > Run update and flash, lol
basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
And again look in my howto's there is an description for Vista/Win7 32/64Bit
basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
there will be NO icon or message in win 7 that device is connected as long as you have USB at the top of device screen that lets you know it is connected....
hi advanced'
this himalaya xdall is still giving me problems'
ive done all of these' links and downloads to up date this mo fo' but without any luck.
this has been slowly driving me up the wall, even though i have followed to the letter everything page by page.
i dont think this is going to work on windows 7'
my usb icon bottom right of my screen is showing a green and white tick that indicates that my pda is conected but not in the my computer screen, even after i followed the information.
im also getting error 101 on the himalaya ungrader, as i said before what about flashing from my sd card thats got to be worth a try.
also i would like to hear from another members that have upgraded the xdall himalaya with windows 7.
but i do think this alas is not ment to be' my destiny is drawn towards my daughters god awlfull pink mobile.
SAVE ME FROM THIS IT IS NEARLY CHRISTMAS
cheers basic
p/s anyone have any ideas you can email me on
[email protected]
it does work on win 7...done it this end load of times
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
advanced15 said:
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
Click to expand...
Click to collapse
It's ok to update without windows mobile center, you need just driver.
basicbri, if you followed my guide, you can't fail. It's really impossible to con't get it work with my manual. Try again, even if you didn't yet
I've been having trouble with unlocking my wp7 device, (htc hd 7).im on 7004 ROM, Once i select the first two boxes and hit unlock,using chevron, i get an error saying
chevron is not responding.
so i can not unlock the phone.
im using windows 7 x64..
i have installed SDk, net framework.4
latest zune...
NOTE------> i dont get any lines to remove in host file in c:\windows\system32\drivers\etc\
coz i have installed registry
plus i also have installed the certificate on my device..
what to do ..
please help me out any one..
please
best regards
this is why i cant install mango update on my phone because it requires a unlocked nodo update..
This is how i got it to work step by step.....
1) deploy cert to email download on phone and apply.....
2) enable airplane mode
3)apply reg to computer
4)this was what did the trick for me..... Go to c: windows system32 drivers etc
add to host file
127.0.0.1 developerservices.windowsphone-int.com
127.0.0.1 developerservices.windowsphone.com
192.168.1.4 developerservices.windowsphone.com
this can be edited with notepad restart computer.....
4) start zune start chevron check 2 boxes click unlock and keep fingers crossed.....
5) Deploy unlockit.xap
6) Last but not least with windows phone device manager move custclear.provml to windows,
run conection setup from market to unlock after updates
Btw: After all is good remove the entry's made the host file restart computer.....