This is just an updated version of deadnex's original guide, with a few things thrown in from various people who have found what works and what doesn't.
This guide has been used and tested as effective with the windows 7 rc 7100 build.
Step 1 - Go here http://www.microsoft.com/windows/windows-7/download.aspx and download Windows 7. You can get a key from the same place, so don't worry about not having a key.
In the event that the servers aren't offering the download {due to server issues} you can download a current version through a torrent site. I recommend mininova as it's the most legitimate of the bunch.
To get a key for windows 7 (32bit) (if you downloaded it through a torrent site), go to this address https://www.microsoft.com/betaexperience/productkeys/win7-32/enus/default.aspx
(64bit)
https://www.microsoft.com/betaexperience/productkeys/win7-64/enus/default.aspx
To clarify this part, you're setting up a usb flash drive or usb card reader and sd card to work as an installation drive for windows 7. I've followed these steps exactly, and found them to be completely accurate. They work, so do each step, and make sure to keep track of your steps so as not to miss one.
Thanks to deadnex for all of this information.
USB-install:
User feedback suggests that doing this next part should be done on a computer running windows vista. In winXP, your usb drive might not show up during the process.
edit (before step 1, create a folder on your main computer called windows7. Don't do this on your shift, and it's recommended to use c:\windows7\ to make the process easier. If you use another location to extract the files to, make sure to remember which directory it is, and adjust the steps of this tutorial to your own location.)
1 - Open the windows7 Iso file with winrar, and extract all the files into C:\WINDOWS7\ (or the folder you created as mentioned above)
2 - Open command prompt in administrator mode (start - all programs - accessories - (right click) Command Prompt and select run as administrator.
3 - Then type these commands without the - and press enter after each :
- CD\
- DISKPART
- LIST DISK
- SELECT DISK X ( X is the memory stick disk number you got from LIST DISK)
- CLEAN (CAUTION; THIS WILL ERASE ALL THE CONTENTS OF THE SELECTED DISK)
- CREATE PARTITION PRIMARY
- SELECT PARTITION 1
- ACTIVE
- FORMAT FS=FAT32 QUICK
- ASSIGN
- EXIT
- XCOPY C:\WINDOWS7\*.* /S /E /F U:\ (U:\ is the name of usb drive you are using for your install, if your drive has another letter, which is most likely, of course put in your own) (after *.* and after each letter preceded by / there's a space!)
OPTIONAL- Include an extra folder on your windows7 usb drive called drivers, and put all the drivers in there that you'll need to get windows 7 running smooth. Drivers are listed just a little further down on the page, so before completing the next step, go there and get the drivers.
WARNING- THIS WILL ERASE YOUR VISTA AND REPLACE IT WITH WINDOWS 7. THIS IS IT!!! Don't worry, win7 rc 7100 is far better anyway. Just to be safe though, backup your personal data before continuing to the next step.
[edit] With a little use and time, I've come to find that windows 7 has a great amount of compatibility issues with certain games. Although I've only had the chance to try a few, there seems to be a trend with win7 being unable to run a lot of older, but still 3d, games. Warcraft 3, and Dungeon Keeper 2, to be more specific. If you're not a gamer, it shouldn't matter, and Windows 7 is still the best choice for you. If you do like to play games, you might want to reconsider changing to windows 7. [edit]
Restart your computer, at startup push FN+F10, and choose your usb drive.
This will take you to the installer, select your language, timezone, and keyboard layout. Next.
In summary, you're going to select Custon (advanced) in the windows 7 installation process, and some card readers (sd to usb) don't work.
This will not affect your HTC SHIFT Vista recovery partition but it will remove Vista itself from your shift. Your settings from Vista will not be carried over to Windows 7.
_________________________________________________________________
DRIVER DOWNLOADS AND INSTALLATION.
Well, once you're through all that, you should be looking at your new windows 7 shift. Now's the fun part! Driver installation!
Go to this link, and download all of the drivers. (10 in total)
http://www.htc.com/www/SupportDownload.aspx?p_id=60&cat=1&dl_id=82
Putting these files on the same flash drive as your windows 7 install makes matters much easier for this time and next time should you need to try again. I also recommend copying and pasting the installation order from the htc site in a notepad or wordpad file and putting that in the same folder as your drivers. That way, when it's time to install your drivers, you can open that file, and use it as a reference to ensure you have the order correct. Chances are that your shift won't connect to the net, right after the win7 installation.
IMPORTANT IMPORTANT IMPORTANT
INSTALL EACH DRIVER IN THE ORDER THAT HTC HAS LISTED ON THEIR DRIVER DOWNLOADS PAGE. DO THIS OR FACE TOTAL DEATHKILL!!! actually, you'll just have driver issues, but that SUCKS!
After many people have responded, I wish to remind everyone. Install all the drivers. INSTALL ALL THE DRIVERS. Install all the drivers. Yes, I said that three times. Although your shift seems to work, when only installing a few, the fact is, drivers like the synaptics touchpad driver also control other parts of your shift, like the two face bottons above the touch pad. If you install one driver, and skip one in between, you mess up the order of installation that is so important, and then force yourself to need an entire wipe and reinstallation of win 7. So, one more time, INSTALL ALL THE DRIVERS FROM HTC.
One more important thing to know about the drivers is, DON'T LET WINDOWS RESET AFTER INSTALLING EACH DRIVER, select RESTART LATER AFTER INSTALLING EACH DRIVER. I REPEAT, INSTALL ALL DRIVERS (IN ORDER) BEFORE RESTARTING WINDOWS.
IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
To save yourself a headache, copy and paste the following list into a wordpad file and place it in the same directory as your driver downloads. Putting this list in the same directory on your win7 flash card means that you can open it on your shift after installing win7 and use it as a reference when installing your drivers. Keep it all together.
EACH DRIVER IS 100% IMPORTANT AND NEEDED, DO NOT SKIP DRIVERS, EVEN IF THAT DEVICE SEEMS TO BE WORKING ALREADY. SKIPPING THE TOUCHPAD DRIVER MEANS THAT THE RESOLUTION AND COMM CENTER BUTTONS DON'T WORK. SKIPPING THE SOUND DRIVER MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN. SKIPPING THE VIDEO DRIVERS MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN.
DON'T SKIP DRIVERS.
Here's the order.
a. VISTA_INTEL Chipset Driver v8[1].3.0.1014
b. Intel VGA driver(7[1].14.10.1461)
c. VistaECDrvV1[1].0.1.10
d. TouchScreen(1[1].1.0.2)
e. Synaptics MicroPad(10[1].0.11.1)
f. Realtek Audio Driver R197(6[1].0.1.5653)
g. Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0 *
h. Extension Kit USBLanDriver(3[1].8.3.7)
i. Shagctrl_1[1].2.6.122-control center
j. Marvell WiFi driver(8[1].114.123.139)
This next part was contributed by Thaihugo. Thank you a ton for this contribution Thaihugo .
To connect the Windows Mobile (your Shift's other OS) side to the PC side of your Shift, run USB Tools in the windows mobile side. If nothing happens, go to your settings (still in mobile)- Connections, then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools first). Another note, some roms, for the wm side of shift, don't include the internet sharing app. If you can't find it, you've got a crap rom, and you should follow a guide which will allow you to put a real rom on it.
Make sure you are connected to the internet on win7 side (using wifi for example) to download WMDC (Windows Mobile Device Center).
If WMDC doesn't load, plug another pocket pc into the shift's usb port while running windows7 and it will download , or if you don't have another pocket pc lying around, download it manually from Microsoft.
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective.
Again, a big huge thanks to deadnex for originally posting the steps to this process. And thanks to everyone else who contributed to a better running shift via windows 7.
Caid.
444
You forgot to specify that drivers must be installed with Vista Compatibility mode enabled and run as Administrator
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
thanks for the reminder.
weird, list disk doesn't list my usb flash drive but lists all my other hard drives. what am i doing wrong?
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Thanks for your description. It looks good. Only onr thing let me bluescreen
my Shift. Whenever I install Synaptics MicroPad(10[1].0.11.1) my Device ended with a bluescreen. I tried a newer Version from the website, but no way, same result. Does anybody understand why? Does someone found out same?
Greets
Androgyn
thaihugo said:
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Click to expand...
Click to collapse
I've added this part, thanks again Thaihugo.
Caid
444
thaihugo said:
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Click to expand...
Click to collapse
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Greenarcher707™ said:
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Click to expand...
Click to collapse
It's like driving a race car compared to vista.
apoparis said:
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
Click to expand...
Click to collapse
Please, is there anybody who can help me resolve my problem? I tried lots of times by nothing works..I'm reading all these positive comments about win7 and I can't wait to have them on my shift.. I can see the usb, I browse there to the folder I have the drivers but can't install them.
Thank you in advance
This is for those who've encountered problems.
Start the whole process over again. I didn't make the guide clear enough when I first posted this thread. It's clearer now. The symantec drivers are probably fine, you're probably crashing because windows aero is still enabled, and it is crashing your shift whenever it tries to switch to high res mode. Disable aero.
As for apop, you need to install via the second option, not the first. I got the same error when I selected the first install option when I booted into the windows 7 installer. This method will completely remove vista as the main os and put it in another folder. As a precaution, I recommend backing up personal documents that are stored in any windows sub directory. *word documents and the likes.
Anything outside of your windows directory, or on the main hard drive itself should remain after the install, but I only did this process once with extra stuff on the drive (it stayed).
Back it up, and do a fresh install.
Caid.
444
Thanks for your anser Caid. I just don't have an external DVD.. Is it impossible to go through 1st way? I have read that some people managed to do it this way..
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
thaihugo said:
It's like driving a race car compared to vista.
Click to expand...
Click to collapse
wow, that got me convinced. installing windows 7 right now. gonna probably stay up late ha ha
Caid444 said:
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
Click to expand...
Click to collapse
Yes, I'm using a usb card reader and sd card. I don't have two options (custom/express). Just one "install now"..
P.S. Thanks for your interest in my case.
ok
After you select "install now" there'll be a license agreement. After that there'll be a choice between two install options. You need to choose the second one.
Caid.
Can someone explain to me how to set up a cellular internet connection through windows 7? I've got the sim card inside, the phone recognizes it, but I don't know how to get it working through win7, I used control center to enable modem, but still no luck. This is really annoying.
Caid.
444
SnapView Turn's and WM7 too ... the screen goes off
Hi, I completed the W7 installation successfully. I even got to conect SnapView with W7 this time. I say this time because with the previous Wm7 guide I wasn't able to do it.
Anyway, now my screen is blank for WM and W7. In fact I have to press the on switch to get the W7 screen back. Once I have W7 working I need to reset Snapview throught the Shift Control Centre to get it going. Finally Snapview / WM comes on. However it lasts on for a few minutes and then the screen is off again. W7 will last for a few minutes more and the same will happen. I then need to press the sliding switch again. The W7 screen will turn on back to normal (the OS doesn't actually turn off but just the screen); however, WM doesn't turn on (in this case it's the screen and WM itself). I then need to repeat the resetting process again.
I did do this:
"
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective"
I did it at W7. Am I missing something? Any hints from the experts? Needless to say, everything was working fine with Vista.
Thanks
Hi
I have tried the dummies guide concerning updating the HTC USB drivers but had a couple of issues:
1. If I press F8 during the boot process I get an abreviated version of the bois setup which has no selection for turning off digital signing of drivers. I have an ASUS motherboard so to enter the bois I press the DEL key. Whilst in the bios I can see no option for turning off the digital signing. The instructions in the thread simply don't work.
I have done some searching and found web pages that explain how to enter the command window, paste 2 or 3 lines of text to turn off digital signing and put W7 64 bit into a sort of test mode. I have done that and have "Test Mode Windows 7600" in the bottom right corner of my Desktop. I still can't install the HTC USB driver as it brings up an error due to being not signed.
Without installing the new driver I cant change my ROM. There must be others in the same boat having changed to Windows 7. Please help.
Ok a few things:
I'm on windows 7 x64 build 7600, I'm having NO problems, just connect your device in windows let it connect with active sync
Then de-connect your blacktsone, shut it down, and hold volume down button then press start up, it will now start in bootloader mode
Now re-connect and wait for it to get installed by your pc!
If you really DO need htc drivers
Go into your bios
Turn of any quick booting AND turn off full logog display
When windows is starting AFTER the bootscreen you'll get a screen with some sort of TABLE in it with all your hardware and all they're IRQ's
at THIS moment when you see this table press f8
Then you get a boot menu
and you can follow your guide with turning off the signed drivers etcetera!
Great Greet Giblet
wow dude, treat me like the idiot I am. Step by step please.
"Then de-connect your blacktsone" - i guess you mean take out the USB cable?
I wait for it to get re-installed but nothing happens whilst in bootloader and the word serial stays at the bottom of the screen
OMG
Oh my god, I am really frustrated becuase I managed to get it to work with your help but I don't know how. I must have tried everything 10 times without luck then all of a sudden it worked.
If only I knew what I was doing wrong I could pass it along to the next poor sap.
Thanks for your help.
H
Some options to get a new ROM on your device:
Alternative Option: Run ROM from storage card (this requires HSPL on your device)
- Connect your phone to your pc with the usb cable
- Choose Disk Drive option on your phone when presented with the choice.
- Extract the downloaded rar and if not called BLACIMG.nbh rename the romfile to that (ruusigned.nbh is commonly used so rename when so)
- Copy the BLACIMG.nbh to your phone's storage card via Windows Explorer where it should show up as an removable harddrive.
- Disconnect your phone from the pc once copy has finished.
- Shut down your phone.
- Press Volume Down (left top of phone) and keep it pressed while pressing the Start button (on top of phone) once.
- The bootloader (red,green,blue,white screen) will now start, it will detect the new rom file and ask you if you want to update your current one.
- Confirm and follow instructions on screen
Done.
As for your unsigned drivers i can offer some tips:
- Press F8 after you have seen all your hard drives recognized in the bios bootup screen but before you see the Windows Logo.
- F8 might be set as a bootselector menu by your motherboard manufacturer, if this gets in the way of trying the get to the F8 options from Windows you can disable it in your BIOS (to enter press del)
- If you have Windows 7 Ultimate you are entitled to XP-Mode which is basically a built in virtual machine of Windows XP within Windows 7, some people have been succesfull connection their phone to that XP installation and were able to update via it.
Hope this helps. together with the previous poster's comment you should come a long way, good luck.
Heefy said:
Oh my god, I am really frustrated becuase I managed to get it to work with your help but I don't know how. I must have tried everything 10 times without luck then all of a sudden it worked.
If only I knew what I was doing wrong I could pass it along to the next poor sap.
Thanks for your help.
H
Click to expand...
Click to collapse
Oh lol, guess you just managed, grats on that. for future you could try the alternative option i posted, works garanteed irregardless of operation system.
Solution found, thread closed
In future try posting such queries in the Dummies guide: updating HTC USB Sync Drivers thread. Thats what its there for
Hi
Firstly, special thank W.I.N.C.O for his app and his clearly instruction. I'm now using wAppStore to install lots of games and apps to my HD2 WP7 without any problems.
As a suggestion, I make this thread to share my experience when first start wAppStore. If you found another errors, I'm very pleased that you could post your error here and we can solve it together.
Ok, here we go. During installing this app, I faced 2 issues. Focus on bottom status bar, I saw what error I had:
1. The status bar show "There was no endpoint listening at http://localhost:55001/wcfDMService that could accept the message......" that mean you have to run manually wcfDMService.exe located in wAppStore installed folder
2. The program show "Couldn't load file or assenbly Microsoft.VisualStudio.DeviceConnectivity.Interop. 10.0, Culture=neutral,PublicKeyToken=b03f5f7f11d50a3a" that mean you have to install WP7 SDK(1,4GB) or W.I.N.C.O's mini WP7 SDK(only 2,94MB in zip file http://attachments.xda-developers.com/attachment.php?attachmentid=722371&d=1318861825. Note: After downloaded mini WP7 SDK, extract it and run WPSDK_en.msi, a windows appear and said it is configuring and disappear right after that. Ok, done)
In sum, you need to have .NET Framework 4(get it here http://www.microsoft.com/download/en/details.aspx?id=17851) and WP7 SDK(or W.I.N.C.O's mini WP7SDK, I strongly recommend W.I.N.C.O's one if you don't need emulator), lastest Zune Software and...ofcourse a good USB cable, lol. Here is my step:
1. Connect your HD2 to your PC
2. Run Zune
3. Run wcfDMService.exe(I pinned it to my taskbar)
4. Run wAppStore. Now, you'll got a message like that "Failed to connect to device as it is pin locked". Don't worry about it, no need to log in with Windows live account(as W.I.N.C.O said) just unlock your screen(Power -> swipe up the wallpaper). Hey, wait...the wAppStore say "Connected". Congratulation, you've done. Now, install all apps you like except Xbox Live game(I installed some Xbox Live games but can't play it)
Donate me if you like my work, just 1 second to click THANK button.
In sum, you need to have WP7 SDK(or W.I.N.C.O's mini WP7SDK, I strongly recommend W.I.N.C.O's one if you don't need emulator), lastest Zune Software and...ofcourse a good USB cable, lol.
Click to expand...
Click to collapse
You forgot one point, you also need to install .NET Framework 4
The sentence should be:
In sum, you need to have .NET Framework 4, then to install WP7 SDK(or W.I.N.C.O's mini WP7SDK, I strongly recommend W.I.N.C.O's one if you don't need emulator), lastest Zune Software and...ofcourse a good USB cable, lol.
Click to expand...
Click to collapse
Skyjouby said:
You forgot one point, you also need to install .NET Framework 4
The sentence should be:
Click to expand...
Click to collapse
Quite right, I forgot it because I had already had it in my computer so when installing wAppStore I don't have to get .NET Framework 4. Thank you, mate
For SOAP problem you have to start cmd as admin :
netsh http add urlacl url=http://+:55501/wcfDMService user=DOMAIN\UserName {DOMAIN\UserName change to you}
Now fixed SOAP probelm on 1.1.0 version !
Hey,
i read the thread in the Hacking Section and because iam a new member here i cant post in this thread.
My problem is that i tried to unlock my Phone (Lumia 820) via this Tool (aiyingyong the chinese one) and i get an error after downloading an archive or something like that. See the picture.
I have Win 8.1 64bit, Visual Studio 2012 Update 4 but no WP8 Emulator. But everything else is working like WP Power Tools, XAP Deployer and Unlock and Locking the Phone for Development.
I tried to change the name of the Phone and started the chinese app as Admin.
Just this Tool wont work. I just want the 10 unsigned apps instead of the 2 that i have right now with my free Dev Account.
Can you please help me?
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Amirphp said:
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Click to expand...
Click to collapse
Thanks i will check it later
Why don`t you guys try the "Dreamspark/Intuit" trick and gain the 10 apps limit?I know its a little frustrating with all those translations but at the end it`s worth to have a try.
Thanks CV bro for reply....
But...Now My problem solved and my phone is unlocked for 10 app....
@thread OP....check that thread at that page 10 and ....And follow the steps....thats work perfectly.
Same problem but not getting fixed
I tried it on my Lumia 520 and I too have this problem. I tried the ways mentioned by the member in 10th page of the TUT on doing this but failed. It justs downloads something everytime when i connect phone ( a 10 MB file which i see in the directory of the software). I tried deleting the device drivers and installed it again, failed. I renamed the phone to Lumia 920, failed. I installed the softwares from various sources including the attachment provided by the member who had given some steps for this problem but failed. Can someone help out me
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Amirphp said:
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Click to expand...
Click to collapse
I have SDK and my phone was registered but now unregistered it and it detects my phone.
gouthamhere said:
I have SDK and my phone was registered but now unregistered it and it detects my phone.
Click to expand...
Click to collapse
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Click to expand...
Click to collapse
I did everything until Step 4. Connected the phone to the PC without internet on both, and this error happens http://snag.gy/SYnU2.jpg and if i try again with internet on in PC, it downloads something ( http://snag.gy/MGPVd.jpg ) inside the Chinese software and the Launcher Error ( http://snag.gy/ps4P7.jpg ) shows up.
I tried it many times and tried with names Lumia 520, 920 and 1520 but nothing works.
I think its some problem with my drivers though my pc detects it and i can even register and unregister it through Developer Tool provided by Microsoft.
gouthamhere said:
http://snag.gy/MGPVd.jpg.
Click to expand...
Click to collapse
Previously that was happened with me too....
But after new version installed from developer thread...worked that...
And its detects my phone instantly as i connect...did not tried to upgrade.
* I did one more thing on My PC...when i was getting this http://snag.gy/MGPVd.jpg error.
Goto Control pannel > Region and Language > Administrative > Change System Locale > Chinies(Tradistiona, Taiwan).
Apply And Reboot....
Then Uninstall Chinies tool and Repeat the same process what i have mentioned in previous post....thats it.
Hello, sorry for bad english language I'm italian and I'm 14.
You have to click CTRL+R, write "intl.cpl", go to "Administrative" and click "Change System Locale", select "Chinese, Simplified, China", and once applied click Restart now.
After reboot it should work, if you can't do it here's a video that explains everything. (It's in italian)
ww w.youtube . com /watch? v=DWTyIaTMbLY&app=desktop
Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
I did what u said, after clicking the blue botton,
The gray phone know has an open lock but doesn't happened
anything.
Click to expand...
Click to collapse
Hi
(Sorry for my little english, feel free to speak french if you can)
I have try to root my 4X HD for using a better recovery app (recover pictures deleted in sd card, now you know my skill). I have use this page: (as newbie i cant post outside links)
n fact, I never had an Android device where this was that easy to achive! Our friends at XDA-Developers offer a guide and the necessary tools in this thread. Having a "Microsoft free zone" and "only" running Linux machines (yeah, even the Android ones run a Linux kernel), I was able to follow up those steps with a little adaption here and there -- and so I will sum up the results for Windows and Linux users as well:
Preparation
First you need to download the required tools, all of them available at the linked XDA-Developers thread:
o4xr.zip is the rooting toolkit
IS11LG_SystemBackupTest.signed.apk to prepare your device
Windows users only: LGUnitedMobileDriver_Ver_3.7.2_LG-P880_LGO4XHD.zip -- the Windows drivers for the device
Having everything downloaded, some additional steps are necessary at your computer:
Windows users only: Unzip and install the drivers
Linux users: Make sure adb is able to detect the device (check with adb devices). If it's not, see at the end of this answer for some hints.
Everybody: Copy IS11LG_SystemBackupTest.signed.apk to your Optimus (e.g. after connecting it via USB in MTP mode, copy the file to the internal SDCard)
Everybody: Create a new directory, unzip o4xr.zip there, and change into this directory.
The rooting process
On your Optimus, go to Settings→Security and make sure "Unknown Sources" is TICKED (i.e. contains a checkmark)
Go to Settings→Developer Options and enable "USB Debugging"
Now install IS11LG_SystemBackupTest.signed.apk (e.g. use a file explorer to find and "launch" it)
Open the "SystemBackupTest" app you just installed. Nothing spectacular will happen, so don't be disappointed here.
Hold the power button and choose "Power off and restart".
When you can see the lock screen, you may notice that the phone is running very slowly, this is normal.
Once the device is fully started up again, connect it to your computer with an USB cable. Make sure the phone is in "Charging Only" mode.
On your PC, open a terminal (Linux) resp. command (cmd.exe, Windows) window and change into the directory you've extractedo4xr.zip` into.
(on Windows, you may need admin privileges: right click, run as administrator. On Linux it did fine for me without superuser/root permissions)
Now run the rooting script:
Windows users: type root followed by the enter key
Linux users: type ./root-linux.sh, also followed by the enter key
Any Mac users? Type ./root-mac.sh, also followed by the enter key. Don't worry, it won't root your Mac/Linux machine (Windows users: it is unlikely to root your box, either
DO NOT DISCONNECT YOUR PHONE WHILE THE SCRIPT RUNS! Wait while it does its job. During that process, the phone will reboot automatically a couple of times. The script will inform you about this in your command/terminal window. Once the command/shell prompt returns, the misdeed is accomplished
Now uninstall SystemBackupTest from your Optimus. Do not launch it again at this state, or you might have to start over from step 5
On your phone, open up Google Play Store and search for "SuperSU". Update the app when prompted, then open it. Press OK to update the SU binary.
You now have root and can safely restore the "Unknown Sources" and "USB debugging" settings back to how you had them! Congratulations! Next steps are to install Titanium Backup, LBE Privacy Guard, and all the other things you might need and which require root!
At step 8. i got "command not found" in Terminal (Linux Mint), assuming script don't work i have reboot my device.
Since my phone boot but is very very slow and screen is friezed, even if i can unlock my SIM card by memory pattern (without sim card and always by memory i can see Settings of android but not down the list).
In recovery boot (Sound up + Power), my device show me a picture that would say "dont unplug charge and usb".
I guess my phone is not rooted, adb can list it but not fastbood. LG software (on windows 7) cant communicate with it because usb driver not work. I guess i've try and read more since 8 hours but my brain is off right now. Any help will be very welcome.
Cheers