Hi Guys
I´m using Fring and my 3G network to receive and make SIP(VOIP)call. But to receive a call my Kaiser cannot stay in stand by.Even the Kaiser in stand by my connection 3G still connected , but only when I turn on de device is that possible to receive a call. Any one know if there is any SIP program that I can receive a SIP call with my phone in stand by.
Thanks
Ricardo
Search.
Read howto configure windows voip.
It comes down to the registry, you have to change the powerstate for the wifi in standby so it doesn't turn off. your battery life will basically disappear.
Related
Hello,
I have a verry weird problem with my Tytn 2.
Most of the time when people try to call me, the phone doens't ring. the only thing i see is a small incomming call icon on top of the screen and the screen turns on. after that i get an sms message from my voicemail. (They get redirected to it)
Sometimes it just works well.
Dont know what is going on, but it is verry annoying. i miss a lot of calls every day.
Maybe anyone know the issue?
Btw on a sidenote, i check my Gmail every 5mins (1min disconect when idle) but it seems to consume a lot of data +- 15MB a day. Only email checking!!
Anyone who knows how that come?
Thanks!
r u on a 3G or 2G coverage?
If on 2G, some operators do not allow data and voice at the same time. So if you have your Internet connection on at almost all the times, your voice calls will automatically be switched to VMail.
But if you have a 3G connection. dunno.
as far as the net usage, do you download ALL the message? try loading only the headers? Do you also download the attachments? all these rack up.
kaluzu said:
r u on a 3G or 2G coverage?
If on 2G, some operators do not allow data and voice at the same time. So if you have your Internet connection on at almost all the times, your voice calls will automatically be switched to VMail.
But if you have a 3G connection. dunno.
as far as the net usage, do you download ALL the message? try loading only the headers? Do you also download the attachments? all these rack up.
Click to expand...
Click to collapse
Well i think i can select that at the menu 'Band' it is configured as 'Auto'
Can chose:
Type network: Auto, GSM or WCDMA
Select GSM/UMTS-band: GSM(900+1800)+UMTS(2100) or GSM(1900+850) or UMTS (2100+800)
i know my provider supports 3g
Or is that the wrong menu? and settings.
Thanks for the tip on the email. Attachments were already disabled. but i chosed to download all tekst and no images. But now i selected it to header only, will monitor how it goes.
Hm, maybe some more ppl with input?
i still think it has something to do with the internet connection that is active.
My Kasier switches between 2G and 3G depending on coverage. Based on the answer you already got above, this might explain the "random" nature of missed calls:
If your coverage at a point in time is 2G and an incoming call happens at the same time as a scheduled email download, the call gets redirected.
If your coverage is 3G, the call comes in normally.
I hate push email on my phone (it's a control thing) and pull email down when and if it suits me!
Hmm dunno if its a coverage problem i travel a lot, and today i missed 2 calls again. Damn its getitng annoying! maybe i need to try a hard reset?
Hm most pll say that the phone rings two times, and then switches to my voicemail. But i dont hear anything, only see a small phone icon in the top bar.
Rings twice and then voicemail is definetly you using data connection when someone calls.
I have had mine not ring and go to voice mail several times. Once when it happend, I called it myself, and watched teh phone, and I noticed that it thought I had on a BT headset. My BT was on on the phone, but I did not have a BT headset on. So, I think it was sending to BT, but there was not BT. I have started turning my BT off if I am in fact not using a BT headset or other BT device.
What radio version are you using?
popeye2755 said:
What radio version are you using?
Click to expand...
Click to collapse
Radioversion: 1.27.12.32
ROM version: 1.56.404.6
(Dutch rom)
I fixed it, by upgrading to a WM6.1 rom and update the radio version to: 1.64.08.21
I got way better batty life now to!
Hi all,
I had installed the VoIP.cab's on a HCT Kaiser and I can register the phone on siphonex witout problem.
I can hear the incoming call, but the microphone don't work.
Using a sniffer program I can view the incoming packets on UDP but, any out packet when I speak.
Other problems is the outside calls. I can't make a outside call... the call never get it destination phone.
Can anybody help me?
Thanks.
SOLVED - VoIP WM6 microphone don't work and can't make a outside call
Replay to myself.
The problem come when the HCS was connected to WIFI and 3G at once.
If only connect to 3G it works fine.
Bye
I've configured the built in voip client win wm6 so that I'm now able to make and receive calls successfully. Since I work in an area with no cell reception but good wifi signal, this should allow me to receive calls while at work. Unfortunately, if I leave the cell radio on while at work it seems to drain the battery quickly as it searches for signal. I've tried turning off the 'phone' option in comm manager, but that seems to disable the voip phone as well.
Is it possible to turn off just the cell phone radio, and leave the voip phone enabled?
My GSM provider happened to give me a contract in which i can dial every national mobile network for free as i am paying a fixed amount for that. But i have to pay extra for international networks and national fixed network. This is where my VoIP account should kick in, because it has much lower calling rates when trying to reach somebody out of these networks.
So as i mentioned in the Title, i would need to do some tuning with my VoIP and GSM accounts. I finally got VoIP and GPS working, now what i need is the dialer to determine which account to use when dialing different numbers, eg. i need my Diamond to dial via VoIP when i am calling international numbers or a number within the national fixed network. At the same time i want it to use my GSM Account for dialing to mobile networks. eg. it has to use the SIM card in case the dial format is +49 (1Yx) xxxxxxx, while Y is either 5,6 or 7. It should use the sip account in every other case.
So i assume that this problem might be solved with tuning the dialplan.xml, but since i have no experience in altering this file i am asking how to do it.
I also guess that editing entries within this file might give me the chance to use VoIP when dialing in international format, e.g. +1 555 727... instead of 001 555 727, as the dialer tells me that it isn't able to dial because it the phone number is not valid. As soon as i am entering the number without international country code it works fine.
Also there is the issue that the Diamond keeps turning off while talking on the phone, whether i am making a call through GSM or VoIP. In case of VoIP, my current calling connection drops because WLAN gets turned off as soon the Diamond goes into Standby mode.
Next problem is the Standby mode in general: As WLAN turns off when the Diamond goes to sleep, i am no longer logged in to my sip account. The result is that no one can call me when dialing my sip phone number.
So i would be grateful if somebody could at least help me with one of these problems. Thanks in advance!
1) about having the phone to decide automatically, according to your IP dialplan settings to use GSM or VoIP, I don't know much.
But you can always use the VoIP Today plugin to manually decide which one you'd like to use.
2)
regarding the phone switching to sleeping mode and by doing so dropping your wifi connexion, you can use DiamondTweak to modify your settings and avoiding this.
Whenever your phone will go to sleeping mode, the wifi connexion will remain active.
3)
No worry about third point, since your wifi connexion will not drop anymore.
How gps work with VOIP ?
"I finally got VoIP and GPS working..."
Can you tell me please how? i´ve tried lots of things and when i instal voipcab the gps stops working.. and after hard-reset. Do you have a special cab? Thanks
gazela00 said:
Do you have a special cab?
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=415262
Ho do you manually decide which one to use? I have installed VOIP today. I can select never to use VOIP. But I cannot force to use VOIP only. That is, my HTC Touch Diamond is deciding whether to use GSM or VOIP.
riri22 said:
1) about having the phone to decide automatically, according to your IP dialplan settings to use GSM or VoIP, I don't know much.
But you can always use the VoIP Today plugin to manually decide which one you'd like to use.
2)
regarding the phone switching to sleeping mode and by doing so dropping your wifi connexion, you can use DiamondTweak to modify your settings and avoiding this.
Whenever your phone will go to sleeping mode, the wifi connexion will remain active.
3)
No worry about third point, since your wifi connexion will not drop anymore.
Click to expand...
Click to collapse
Hi, I have been using a mobile to just talk and SMS. Few days back bought a HTC TYTN II Kaiser and this was a quantum jump for me. Question - 1. Is it possible to have WiFi, GSM/3G and Bluetooth services active all the time ? 2. How do I know which service is being utilised by an application to communicate with outside world ? I want the phone call and SMS to utilise GSM/3G and all other to use the WiFi (home broadband). Appreciate help in laymans language. Thanks.
Most of that can be configured in your Connection Settings, go in there and take a look around.
Having everything on at the same time will severely reduce the time your device's battery will last. You may wish to rethink.
Thanks folks. I could find the setup for SMS and phone. SMS and Phone through O2 (current service provider). This is what I wanted. I now need to direct everything else to go via wireless-broadband.
@ stuntdouble
not to mention that WiFi and Bluetooth on at the same time is a trainwreck.
Thanks for the causion. I intend to turn on WiFi or Blue when I want. So no issues.
Pop quiz for experts. I see an 'E', '3G' or a 'G' at various times as the active connection medium. To connect to the internet using my home broadband, I turned on the WiFi and saw the WiFi icon in the place where the above symbols appear. Does this mean that the WiFi is active & connected to the Internet AND the 3G or GPRS or E is deavtivated ? Internet worked perfectly. Is there a priority among the connecting medium/protocols ?