Database Develop

Big problems with CyanogenMod-4.2.11.1 and APPS2SD

Hi
I have some big problems when I use an EXT2, EXT3 ore EXT4 partition on my SD card.
I want to use APPS2SD to save memory space, but as soon as I make an EXT partition on my SD card, my phone always hangs all the time in the startup.
I get the Android logo, and that the screen goes black with background light, and hangs like that fore 30min with no change.
But if I eject my SD card and start up without it, it's no problem, but now all my programs are in the SD card so they are missing.
What I've done:
I had CyanogenMod-4.2.05.
Made an EXT3 partiotion on my SD card.
Made an linux-swap 31mb partiotion
Updatet to CyanogenMod-4.2.11.1 and than it started up, added my progs to the SD.
Had 1 reboot with no problem, tried to update some programs, than it hang up on the update, woudnt update.
So I had an reboot, that when it started up I got a lot of error messages on the updates.
Tried an new update, and now it wont start up with the SD inserted.
I tried ext partition on my erlier CyanogenMod but same problem than also...
What could my problem be?
Have an 8gb class 4 micro SD card
when I now trie to install programs I get an error message "Insuffcient storage availble"

Clearly this is a problem with your sdcard. Try complete re-format first, followed by complete wipe and re-flash. If that doesn't help then you need a new sdcard.
Good luck.

In what order are your partitions? It sounds like you no longer have the FAT32 as mmcblk0p1? Make sure the first partition is the FAT32, the second is EXT, and the third your swap.

Hi
Could be my card, it's an ebay card so, but works fine with music...
I use an guide fore formating my card, and I make the fat32 first, than ext and so the swap.
Now I tried to make an partition with ubuntu, and without the swap, but dosent seem to help, black screen after the adroid logo....
I guess I give up and its my card...
When i use the Print comand in parted i get the fat32 up first...
Print
number start end size type file system fla
gs
1 0 7500 7500mb primary fat32 lba
2 7500 8000 500mb primary ext2
3 8000 8032 32mb primary linux-swap(v1)

Use AmonRa's recovery? It will paritition the card for you the right way with whatever size partitions you specify.

Ok so my partition could be the problem?
ill try the AmonRa's recovery than, and if not I guess its not ment to be apps2sd on my phone...

Well, I wouldn't say that apps2sd is not ment for your phone since so many of us are using this hack (including myself) however this may be a tedious process of eliminating possible causes. I would not rule out the possibility of damaged SD card. It has happened before to many people. Re-format and re-partition your existing card first. Wipe everything off your phone, re-flash the rom of your choice (following the instructions) and see if it works. If it doesn't work - then I would look into getting a different SD card. I just received a tweet that compUSA has class 6 8GbB card with adapter for $30. I also saw something in "Dream accessories" forum in the "Promotions" thread, I believe 8GB card for $15 from Amazon. Cards are a lot cheaper then new phone, you should try that out. Good luck.

Ok.
I've now installed the AmonRa's recovery 1.5.2
Partition the card with AmonRa's recovery
Wiped data/factory
Shud I wipe dalvik-cache, battry status, and rotate settings also?

Wipe dalvik-cache, others should not matter for what you're trying to accomplish.

Ok thx.
I'll try that, if it doesnt work now, I'll buy an new sd card

So AmonRa's recovery didnt help, so I guess it's my sd card than.
Will buy an new one and test with that.
So fore now on it's low on space
Maby this time I will remember to take an backup when I have y phone the way I like, getting tierd of setting up my phone all the time

Apps2SD problem; after phone freeze, phone will not boot with card inserted.

Ok, so my phone has only had CyanogenMod on it for 5 days, so I'm not really deep in this stuff yet.
I initially installed Cmod 4.2.11 and set up Apps2SD on an 8gb Class 8 card (7gb FAT32, 1GB EXT, 64mb swap). I then upgraded to 4.2.12.2 yesterday morning. All of these steps seemed to go by as smooth as silk.
Apparently at some point last night my phone locked up... when I went to use it this morning it was unresponsive, and I had to pull the battery to get it to reboot. Now, with the SD card inserted, I get the Tmo G1 logo, then the Cyanogen Android logo... then a black screen. With the SD card removed, the phone boots ok, but all of my applications are (obviously) missing.
Looking at the card on a PC, my FAT32 partition comes up fine, so I don't think the card is bad. Also, when I insert the card while the phone is on, the FAT32 partition comes up ok, but the secondary SD card values remain as Unavailable in the System Menu. (This may be expected, though, as the card was not present on boot.)
I know that you can't remove the SD card while the phone is on when using Apps2SD, and I didn't until there was an issue.
What is my solution? Is there a way to repair my EXT partition, or do I need to do the whole thing over? Also, I did not upgrade to EXT4; I couldn't get the commands to work, and it said optional, so I skipped it. Was this a mistake?

I would reformat your card again. I would just stick with Fat32 and ext3. you don't need swap for cyanogens rom.

Ok, great. Any idea what could have happened? It took me like two days to re-install all my apps, and I'd like to take whatever steps I can to prevent this from happening again.

Partition...problem?

So. I have Froyo, and Amon-ra 1.7.0
Downloaded NFS Shift (despite knowing it has problems with snapdragon)
and decided to install it. I don't use a lot of apps, but 100mb is more than I have.
So I decided to do apps 2 sd. First things first, partition the sd card.
Booted into recovery, partitioned sd card (1 gig to ext3, remainder to fat32)
And rebooted the phone. And now...pretty much everything on my sdcard is gone?
Was that supposed to happen? It's not that devestating, but I did have some stuff
on there that I would like to get back...
Gah.

This is normal when you repartition disk. Partition table was overwritten by new table you create in recovery.
Theoretically if you don't write any data on sdcard after the loss, you can plug the card to computer and recovery your old partition table and try to recovery files but if you write something, you can't do nothing.
But you can try it, google for "fat32 recovery" ..

Partitioning SD card erases everything that was on it.

Yup, that's normal. Partitioning anything in that way will wipe it all.

Alright, this is what I get for not researching I guess. And I haven't added anything to it, so I will try to recover later. Thanks guys. Just curious.
Sent from my Nexus One using XDA App

SD Storage & Partition

I am running CM7.1.0 on my nook color off the SD card. I used the YouTube tutorial by the Crash Tech Dummies. Now I notice that I am only allowed only 1GB of storage on the SD card. I used partition wizard to increase the space on the 4th partition like I was instructed. I would prefer to install the apps to the SD card so I have already burned through the space provided. Bellow I have listed what I see in partition magic. Should I move the free space in the 4th partition into the first? Or should I load the cm7 onto the HD of the nook? I am a bit of a noob but I have gotten this far.
My 16 GB card partitions read:
G:boot 30.32mb used 118.69mb unused
*: 179.55mb used 283.25mb unused
*: 367.34mb used 597.50mb unused
*: 6.68 gb used 6.61gb unused
Any suggestions would be great…I don’t know what else to do.
Help me XDA Developers you my only hope…
Steve da Noob

First of all, what is "1GB of storage on the SD card" you're talking about?
Secondly, the 4th partition has nothing to do with holding installed apps.

votinh said:
First of all, what is "1GB of storage on the SD card" you're talking about?
Secondly, the 4th partition has nothing to do with holding installed apps.
Click to expand...
Click to collapse
when i go into settings, apps, storage use, sd card it says 1.0 gb used 0.00 free...i was assuming this was referring to a section of the sd card. I also assumed that the 4th partition was being used by something do the fact that half of it has been used by something...
Steve

Quoting from VeryGreen's instructions
Partition layout for the SD cards depends on size:
Less than 600M - unsupported.
up to 1G cards gets: system of ~300M and data of the rest of space. No FAT partition
2G cards (more than 1G up to 1800M) gets: 300M system, 612M data, rest is FAT sdcard
more than 2G cards gets: 460M system, 975M data, rest is FAT for sdcard.
Your first partition is the boot, nothing else should go on here.
Your second partition is the system partition containing the OS and system applications
Your 3rd partition is the data partition used for downloaded apps. The space allocated is adequate for a decent number of downloaded apps but may get tight if you load lots of games. You can move apps to "SD" which is the 4th partition if you get tight on space.
Your 4th partition is the "SD" user data area. This can be used by apps for their working folders and is also where you put stuff like media (pictures, music, video). It is the partition that will normally get mounted as a drive on a PC when the USB is connected and USB disk storage is turned on via the notification panel.
You say the 4th partition has got 6.68GB data on already? That should start off fairly empty until you put stuff on there.

I do have music and pictures on the device that i uploaded so that's where the items on partition #4 came from.
When i try and move the applications to the sd card it tells me that there is not enough room on the card. Also when i plug in the nook to my computer without the sd card in it shows the applications on the internal hard drive. Should i try and move space from the 4th partition to the 3 and see if that helps?
Thanks,
Steve

WileECoyote79 said:
When i try and move the applications to the sd card it tells me that there is not enough room on the card. Also when i plug in the nook to my computer without the sd card in it shows the applications on the internal hard drive. Should i try and move space from the 4th partition to the 3 and see if that helps?
Click to expand...
Click to collapse
I'm a little surprised it says there is no room available to move an app if the partition still shows 6GB free. Have you tried using Apps2SD app. This will show space available and is a convenient way to move stuff around. Another possibility is that you are trying to do this whilst USB connected to the PC. That won't work as the Nook software can't access the SD partition while it is PC mounted.
Currently you said there was nearly 600MB free in your 3rd partition where new downloads go. If so I wouldn't bother with trying to move stuff until you get tight on space there.
If that happens and you just need to create some more app space in the 3rd partition then you can use a partition tool on the PC like minitools to reallocate some of the space from 4 to 3 to give yourself more app space.

I tried the apps2sd and i get the same error. It sends me to the same place as i discussed above and when i tell it to send it to the sd card i get the same error. "failed to move application, there is not enough storage space".
I am not trying to move anything while i have the nook attached to my computer. the only time i really used that function was to add music and some pictures.
This is really starting to get frustrating. I do appreciate all your help.
Is another option loading CM7 to the nook instead of the SD card?

I only used the SD CM7 method for a short while and I don't think I ever tried to move apps to the "SD" so maybe there is an issue trying to do this.
I think you have two choices.
If you stick with SD then increase the data partition to give yourself more room for apps.
If you never want to use the B&N OS then the internal memory is the best option. The SD card then becomes a single partition user space card and you can certainly move apps to it. If you do this then also consider using the zip that increases the internal data partition to 2GB to give yourself more internal room for apps anyway.

bobtidey said:
I only used the SD CM7 method for a short while and I don't think I ever tried to move apps to the "SD" so maybe there is an issue trying to do this.
I think you have two choices.
If you stick with SD then increase the data partition to give yourself more room for apps.
If you never want to use the B&N OS then the internal memory is the best option. The SD card then becomes a single partition user space card and you can certainly move apps to it. If you do this then also consider using the zip that increases the internal data partition to 2GB to give yourself more internal room for apps anyway.
Click to expand...
Click to collapse
I think ill try adjusting the partition and see if that helps. Like you said if it doesn't ill look into loading onto the internal memory. I am not to impressed with the B&N software and i use the kindle software for my e-reading.
Is there a method you could recommend for loading it onto the internal memory? A step by step tutorial would help out lots. I am not familiar with the zip you are referring to.
Thanks,
Steve

WileECoyote79 said:
I think ill try adjusting the partition and see if that helps. Like you said if it doesn't ill look into loading onto the internal memory. I am not to impressed with the B&N software and i use the kindle software for my e-reading.
Is there a method you could recommend for loading it onto the internal memory? A step by step tutorial would help out lots. I am not familiar with the zip you are referring to.
Thanks,
Steve
Click to expand...
Click to collapse
Yes. If you don't think you'll use the B&N then internal is the way to go. Especially if you use Amazon Kindle for your books.
The easiest method in my view is to use the Eyeballer Clockwork boot SD and use that then to flash the main ROM and gapps zips.
You can find the most straightforward instructions here but I would use the KANG MiRaGe ROM as the main OS.
http://rootzwiki.com/topic/8208-guide-install-cm71-clockworkmod-to-emmc-all-nooks-updated101111/
The 2GB partition zip can be found here
http://forum.xda-developers.com/showthread.php?t=1094371
This can actually be applied at same time as installing the OS and gapps. Put the repartition zip, the ROM zip and the gapps zip on the Eyeballer SD card then use the menus to flash repartition, ROM and then gapps.
If you also follow the advice to put ROM manager and flash clockwork to the internal as well then future updates become very easy and do not even involve removing the SD card.

Ive decided that the best solution is to install on the internal rather than the sd card. i think this will be less of a pain in the butt in the long run.
being new to android and coming over from apple (booooo) is there anyway to easy re-install the apps that i have already downloaded? I do have one that i did pay for.
Steve

easy way to re-install? hmmm, maybe not but I would suggest you make the backup for all of your apps first (meaning save all .apk files to somewhere else)

ok here goes nothing lol

Titanium backup would allow you to back up all your apps. If you save the Titanium back up folder (say onto a PC via USB) then after you have done the internal install then put the Titanium back up folder back onto the fresh SD card and you can restore the apps back from there.

everything seems to be working just fine...thank you all for the help and advice...
Steve

[MOD] Mount External SD Card as /data for MORE SPACE

THIS MOD IS FOR THE METROPCS VARIANTS ONLY!!!!
Most of you reading this will know me from my AdvancedStock ROM. Well This new mod I created will allow you to mount an External Partition on the external SD Card as the /data partition on the phone allowing for as much space as you want on the phone for all apps, user data, pretty much everything. This mod replaces the usual /data mount point so that the SD Card can take over. It is a little complicated to explain but here goes:
Partition: A specific area of the drive.
Mount Point: Where the Partition is mounted during or after boot.
NAND: Internal Storage
SD Card: Your EXTERNAL SD Card. (Not INTERNAL)
Your phone has whats called partitions on its internal NAND storage device (mmcblk0). This storage device holds the OS, User data, etc. This NAND is what is changed when flashing ROMs, Wiping data, etc. Your phone also has what is call mount points. Mount points, for all intents and purposes, is a sort of folder on the NAND storage that can mount these partitions so your phone boots up, can download things, run apps, etc. This mod changes the /data mount point (Where all USERDATA is stored, like apps, app data, settings, wifi, etc.) to the SD Card(mmcblk1). Doing this mod, you will have 2 partitions on the SD Card, mmcblk1p1 and mmcblk1p2. This mod, in order to be used, requires that the SD Card have TWO(2) partitions. mmcblk1p1(fat32), & mmcblk1p2(ext4). This new kernel will use the mmcblk1p2 partition to store the USERDATA by replacing the mount point that was originally mmcblk0p2 (Or something to that affect). This is done by unpacking the kernel modifing the fstab(File with a list of mount points and partitions).
So at the end of formatting the SD Card the partition table should look something (does NOT need to be exact
----------------------------------------------
| FAT32(500MB) | EXT4(28GB) |
----------------------------------------------
PARTITION 1 | PARTITION 2
mmcblk1p1 | mmcblk1p2
I hope this explination helps everyone under stand exactly what this does. This is not a apps2sd mod, this is a DATA2SD mod. ALL user data, not just apps, will be stored on the SD Card.
Wiki: https://urgero.org/626ExtData
Download: https://www.mediafire.com/?poalj63aubajkd2
Need to Factory Reset (Post MODDED KERNEL install): https://www.mediafire.com/?qaxcyhxusfc1f2u (Flash in TWRP, Not tested)
Download for latest Firmware(1.23.155.0.3): https://www.mediafire.com/?0po4jm2a6k8rx7u
Warnings:
You always run the risk of bricking a device when using non-oem firmware.
Although I have tested this extensively (And currently using it as my Daily Driver) expect bugs.
Under Settings -> Storage you will see "Unavailable/8.00GB" This is fine and can be ignored.
This can cause a bootloop if not used properly. and can Soft-Brick your device.
This process requires the phone to act AS IF it was factory data reset. But it was not. You will need to re-download all your apps, configure the phone again as if you did a factory data reset. This is required because of the new kernel. If you want to revert back to before, just flash the boot from the backup you will be making in the install steps.
Notes before installing:
1. The external data partition MUST be Partition 2 no if ands or buts!
2. This **MAY** cause some lag on the device if the SD Card is class 4 and lower, or if the SD Card is old.
3. The partition SIZES do not matter as long as there are two partitions as explained in the instructions.
4. The Wipe data function in TWRP will STILL BE MAPPED TO THE INTERNAL DATA NOT THE NEW EXTERNAL ONE SO DO NOT WIPE DATA OR FACTORY RESET WILL USING THIS KERNEL OR YOU WILL LOSE THE DATA FROM BEFORE THE KERNEL WAS FLASHED.
Install:
You need TWRP installed, so go to xda forums and install it.
Then boot into TWRP.
Select Backup.
Select Storage Device
Select Micro SD
Select All options and click "Backup"
Wait until it is done.
plug your phone in and in Windows/Linux/Mac go to your phone in a file manager then Phone\TWRP\BACKUPS\<SOME_RANDOM_NUMBERS\todays date and copy everything out of there.
Put htc626s_extData.img on the INTERNAL SD CARD.
Reboot into android and Install AParted
Open it and press the green plus button twice.
For Partition 1: Make sure the file system is fat32, this is important!!!! (Size it how you like) This is required so Android does not bug you about an unsupported filesystem.
For Partition 2: Make the file system ext4(Size it how you like)
Hit "Apply Changes"
Wait and then reboot back into TWRP.
Go to Install -> Then in the bottom right select "Install Image" and browse to the htc626s_extData.img file you downloaded and put on the internal SD Card.
Select "Boot" and install.
wait a second.
then click Reboot System.
First boot up time will be long, but after that it will boot up like a new phone!!! Dont worry, your data is still on the OLD data partition, the phone just does not have access to it.
Enjoy and profit from the new space.
Any question let me know here, PM, or whatever.

Hi, thanks for all the hard work your putting into this phone. I want to try the mod but I already use link2sd (Free version) and link some of my apps to the sd card. So I already have an ext2 partition on my sd card. Can I just flash the kernel and it boots with the second partition mounted and the apps that I already linked with link2sd, still work. Thanks again!!!

ricki13th said:
Hi, thanks for all the hard work your putting into this phone. I want to try the mod but I already use link2sd (Free version) and link some of my apps to the sd card. So I already have an ext2 partition on my sd card. Can I just flash the kernel and it boots with the second partition mounted and the apps that I already linked with link2sd, still work. Thanks again!!!
Click to expand...
Click to collapse
Unfortunately no. The mod requires a fresh ext4, not ext2, partition.

Can you take screenshot of system storage?

So partition 2 will be acting like internal storage completely or just data for apps? If its completely, couldn't I just dedicate 99% of my external card to partition 2?
---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------
Or better yet, what is the purpose of each partition?

Will you be adding more features to this Kernel in the future?

talksickisil said:
So partition 2 will be acting like internal storage completely or just data for apps? If its completely, couldn't I just dedicate 99% of my external card to partition 2?
---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------
Or better yet, what is the purpose of each partition?
Click to expand...
Click to collapse
The first partition is there so Android does not bug you about a broken SD card. The second acts as 100% internal storage AND /data.
And yes 99% of the SD card can be for this mod. Or 50% that's up to you.
Screenshot uploaded so you guys can see the amount of apps is over the amount of space this phone used to have.

Quote from OP: An extended explanation of what this mod does:
Partition: A specific area of the drive.
Mount Point: Where the Partition is mounted during or after boot.
NAND: Internal Storage
SD Card: Your EXTERNAL SD Card. (Not INTERNAL)
Your phone has whats called partitions on its internal NAND storage device (mmcblk0). This storage device holds the OS, User data, etc. This NAND is what is changed when flashing ROMs, Wiping data, etc. Your phone also has what is call mount points. Mount points, for all intents and purposes, is a sort of folder on the NAND storage that can mount these partitions so your phone boots up, can download things, run apps, etc. This mod changes the /data mount point (Where all USERDATA is stored, like apps, app data, settings, wifi, etc.) to the SD Card(mmcblk1). Doing this mod, you will have 2 partitions on the SD Card, mmcblk1p1 and mmcblk1p2. This mod, in order to be used, requires that the SD Card have TWO(2) partitions. mmcblk1p1(fat32), & mmcblk1p2(ext4). This new kernel will use the mmcblk1p2 partition to store the USERDATA by replacing the mount point that was originally mmcblk0p2 (Or something to that affect). This is done by unpacking the kernel modifing the fstab(File with a list of mount points and partitions).
So at the end of formatting the SD Card the partition table should look something (does NOT need to be exact
----------------------------------------------
| FAT32(500MB) | EXT4(28GB) |
----------------------------------------------
PARTITION 1 | PARTITION 2
mmcblk1p1 | mmcblk1p2
I hope this explination helps everyone under stand exactly what this does. This is not a apps2sd mod, this is a DATA2SD mod. ALL user data, not just apps, will be stored on the SD Card.
Click to expand...
Click to collapse

Will a 16gb SD be good enough? It looks like you're using a 32gb SD card. For ext4 partition you have it for 28gb why not 31gb? And can I make fat32 500mb as well? And since you use 28gb.. 8gb is used for nand storage? Can u give me an example for a 16gb SD card for aparted? I will like to make use of all of the 16gb SD. Thanks

kdayyy said:
Will a 16gb SD be good enough? It looks like you're using a 32gb SD card. For ext4 partition you have it for 28gb why not 31gb? And can I make fat32 500mb as well? And since you use 28gb.. 8gb is used for nand storage? Can u give me an example for a 16gb SD card for aparted? I will like to make use of all of the 16gb SD. Thanks
Click to expand...
Click to collapse
The sizes can be what ever you want. as long as the 2nd partition is ext4. thats all you really need to worry about.
But here is an example:
Partition 1:
Filesystem: fat32
Size: 500MB
Partition 2:
Filesystem: ext4
Size: 1100MB
It is really that simple. I am using a 32GB SD Card, and have it split so that there is an 8GB is fat32 for Pictures I take and other misc Windows based programs I use with my phone.
But you do what you want. But once you set the sizes and go through Android's Setup, you cannot resize them.

Man I can't wait to get to a computer and try this out. Man, with xposed finally working it really couldn't have came at a better time. I'm down to about 327 mb of free space in the internal storage.. 8gb of total internal space was a horrible decision by HTC. I understand the phone is a budget buy but 8gb is downright insulting in 2015 on a lollipop device. But let me stop that miniature rant now. I did notice that my 32gb card I bought 3 phones ago is only class 4. Hopefully it doesn't lag like you mentioned could possibly be the case.. And if it is the case, I'm going to upgrade my micro SD card to a higher storage level and class level. I really need to get this mod working, and working optimally. In my opinion, if all goes correctly it will be a major upgrade to the phone and be a solution for my single biggest issue about this phone.

talksickisil said:
Man I can't wait to get to a computer and try this out. Man, with xposed finally working it really couldn't have came at a better time. I'm down to about 327 mb of free space in the internal storage.. 8gb of total internal space was a horrible decision by HTC. I understand the phone is a budget buy but 8gb is downright insulting in 2015 on a lollipop device. But let me stop that miniature rant now. I did notice that my 32gb card I bought 3 phones ago is only class 4. Hopefully it doesn't lag like you mentioned could possibly be the case.. And if it is the case, I'm going to upgrade my micro SD card to a higher storage level and class level. I really need to get this mod working, and working optimally. In my opinion, if all goes correctly it will be a major upgrade to the phone and be a solution for my single biggest issue about this phone.
Click to expand...
Click to collapse
I'd recommend a class 6 or 10 I don't think this phone supports an SD card larger than 64GB so be warned on that aspect. A brand new card would also be better.

sandix said:
I'd recommend a class 6 or 10 I don't think this phone supports an SD card larger than 64GB so be warned on that aspect. A brand new card would also be better.
Click to expand...
Click to collapse
Thanks for the tip. Like I said, I will try it out on my current card first. I'll report back the results once I do. I just need to get to a computer already! My laptop is at my moms house. I will be over there today for the holiday. Hopefully I remember to get it. By the way merry Christmas man! Thanks again

talksickisil said:
Thanks for the tip. Like I said, I will try it out on my current card first. I'll report back the results once I do. I just need to get to a computer already! My laptop is at my moms house. I will be over there today for the holiday. Hopefully I remember to get it. By the way merry Christmas man! Thanks again
Click to expand...
Click to collapse
How'd the card react to the mod?

Thanks sandix this looks awesome. I have a class 4 sd but am going to try this when I get my class 10 in the mail. My manual says this phone supports sd cards up to 200gb. Hope I can use all that .

Wow. Yes if the phone supports 200GB then you can use 99.99% of that. (Some factors come into play like the SD card will have dead spots in it it will probably be closer to like 196GB, as well as the fat32 partition you need.) Post screenshots as well as results
Sent from my HTC Desire 626s using Tapatalk

sandix said:
How'd the card react to the mod?
Click to expand...
Click to collapse
I still haven't gotten around to the PC yet.. I'm not sure if I need this actually.. For a few days I've had xposed mod xinternal sd and well, check out the screen shot
Are you familiar with this module? I've never used it before.. But I have plenty of app space now. Finally I have everything I want installed coexisting all at the same time
No issues so far

That's a good module, but it's not doing what you think it does. It will work for awhile but you will find that you will run out of space because of apk size.
Sent from my HTC Desire 626s using Tapatalk

Thanks for the heads up. I figured it's worth a try. If I have issues I'll remove it. I updated the screenshot. It says I have 32 removable apps right now.

sandix said:
Wow. Yes if the phone supports 200GB then you can use 99.99% of that. (Some factors come into play like the SD card will have dead spots in it it will probably be closer to like 196GB, as well as the fat32 partition you need.) Post screenshots as well as results
Sent from my HTC Desire 626s using Tapatalk
Click to expand...
Click to collapse
Will do. Waiting for sd card.