Related
Yesterday I upgraded to cyanogen's 4.0.4, it said that i would have to partition my sd card(8gb) to allow the apps2sd to automatically work, a friend of mines recommended Paragon Partition Manager, i installed it, and partition my sd card, to ext 3 format, so i have about 1.3 gb of partitioned sd card and about a little over 6 gigs for music and videos. The cyanogen FAQs said that " 4. How do I set up apps-to-sd?
You need to create a second partition on your SD card in the ext2/ext3/ext4 format. Search the forums if you don't know how to do this. Once created, the ROM will move your apps automatically and new apps will be installed to the SD by default. " but it hasnt freed up any space on my phone, and when i download new apps, it still goes directly to the phone. Am I doing somthing wrong and should i consider reformating the whole sd card, partioning over again and adding a lower amount for apps and a linux swap partion also.
mrhalfdeadman said:
Yesterday I upgraded to cyanogen's 4.0.4, it said that i would have to partition my sd card(8gb) to allow the apps2sd to automatically work, a friend of mines recommended Paragon Partition Manager, i installed it, and partition my sd card, to ext 3 format, so i have about 1.3 gb of partitioned sd card and about a little over 6 gigs for music and videos. The cyanogen FAQs said that " 4. How do I set up apps-to-sd?
You need to create a second partition on your SD card in the ext2/ext3/ext4 format. Search the forums if you don't know how to do this. Once created, the ROM will move your apps automatically and new apps will be installed to the SD by default. " but it hasnt freed up any space on my phone, and when i download new apps, it still goes directly to the phone. Am I doing somthing wrong and should i consider reformating the whole sd card, partioning over again and adding a lower amount for apps and a linux swap partion also.
Click to expand...
Click to collapse
You aren't meant to make one bigger than 1.5, yours is very close so it could be the issue.
A good way to check if its working is if space is being used up on the ext3. Go to Setting > SD > secondary partition.
Also try rebooting, you might find that your internal space increases afterwards.
If neither of those work then reformat and make a smaller ext partition. I'm struggling to fill up my 500mb, why anyone would need 1GB+ is beyond me.
also,i am noticing since i have done this partitioning, that if i have my sd card in the phone and reboot, that after the android boot screen, that my phone will go blank, and if i pull the card and battery out and reboot with no card in the phone will do fine.
mrhalfdeadman said:
also,i am noticing since i have done this partitioning, that if i have my sd card in the phone and reboot, that after the android boot screen, that my phone will go blank, and if i pull the card and battery out and reboot with no card in the phone will do fine.
Click to expand...
Click to collapse
Hold on. Your phone will only boot properly without the sdcard. You should not remove the card when the phone is on, because it can bork your entire partition.
If I was you I'd wipe the card and start over, adding a smaller ext partition.
ahh shoot, ok then, i just formatted the partion back to fat 32, so you suggest me to just, re partition it in ext 3 and make it smaller to about 500 mb should i also make a linux swap?
and also, although i formatted it back to fat 32, it wont let me merge the files back into 7.3 gigs. or maybe i am not doing it right.
mrhalfdeadman said:
and also, although i formatted it back to fat 32, it wont let me merge the files back into 7.3 gigs. or maybe i am not doing it right.
Click to expand...
Click to collapse
merge files? got no idea what you're talking about.
Just wipe all partitions on the card. Make one ~7GB FAT32, ~500mb ext3 and if you want 32mb linux swap. To be safe wipe your phone and reflash cyanogen mod.
yea well, i dont know what is going on with it, but i have wiped, and rebooted, now and it is still blank after the android boot screen, and the sd card is in it now. i dont know what to say now.
i have the same issue
The problem is the Recovery IMG
Try install this recovery image: RA-dream-v1.2.3 Recovery Image
The make the partitions again from the recovery console
Jesus, man...
I suppose because of lingering paranoia from the days of filling my phone up daily, I've always made an Ext partition around a gig. I've never, ever, ever even filled half of it.
Then again, since I don't usually listen to music on my phone I also Have a nearly 7 gig fat 32 partition that I don't often fill. Honestly, it's probably because I keep losing the damned jack adapter and I haven't seen the earbuds I bought with the jack attached in months.
I have so many 3.5mm headphones around and still, those damned adapters elude me.
having a few issues in this area as well, all is partitioned as reccomended within the recovery console, (~7Gigs'ish fat32 and a 500MB part on ext3...) apps to SD is still blanked out... weird from my POV, as it worked fine until i updated to CyanogenMod 5.0.7 test 5..
Can anyone reccomend a more stable "2.1" based Cyan rom? or is the 5.*.* series the first of its kind to utilize 2.1? sorry for veering off-topic, but i feel my problem may be the newest releas of CM as it IS a test build...
Any words of wisdom would be greaaaaatly appreciated. not new to this stuff, but the apps2sd thing i never bothered with untill now (i do so mu h reformatting and build testing its becoming a pain to re-install all my apps... as i refuse to pay for the MyBackup app lol)
~Dark
Hi
I have some big problems when I use an EXT2, EXT3 ore EXT4 partition on my SD card.
I want to use APPS2SD to save memory space, but as soon as I make an EXT partition on my SD card, my phone always hangs all the time in the startup.
I get the Android logo, and that the screen goes black with background light, and hangs like that fore 30min with no change.
But if I eject my SD card and start up without it, it's no problem, but now all my programs are in the SD card so they are missing.
What I've done:
I had CyanogenMod-4.2.05.
Made an EXT3 partiotion on my SD card.
Made an linux-swap 31mb partiotion
Updatet to CyanogenMod-4.2.11.1 and than it started up, added my progs to the SD.
Had 1 reboot with no problem, tried to update some programs, than it hang up on the update, woudnt update.
So I had an reboot, that when it started up I got a lot of error messages on the updates.
Tried an new update, and now it wont start up with the SD inserted.
I tried ext partition on my erlier CyanogenMod but same problem than also...
What could my problem be?
Have an 8gb class 4 micro SD card
when I now trie to install programs I get an error message "Insuffcient storage availble"
Clearly this is a problem with your sdcard. Try complete re-format first, followed by complete wipe and re-flash. If that doesn't help then you need a new sdcard.
Good luck.
In what order are your partitions? It sounds like you no longer have the FAT32 as mmcblk0p1? Make sure the first partition is the FAT32, the second is EXT, and the third your swap.
Hi
Could be my card, it's an ebay card so, but works fine with music...
I use an guide fore formating my card, and I make the fat32 first, than ext and so the swap.
Now I tried to make an partition with ubuntu, and without the swap, but dosent seem to help, black screen after the adroid logo....
I guess I give up and its my card...
When i use the Print comand in parted i get the fat32 up first...
Print
number start end size type file system fla
gs
1 0 7500 7500mb primary fat32 lba
2 7500 8000 500mb primary ext2
3 8000 8032 32mb primary linux-swap(v1)
Use AmonRa's recovery? It will paritition the card for you the right way with whatever size partitions you specify.
Ok so my partition could be the problem?
ill try the AmonRa's recovery than, and if not I guess its not ment to be apps2sd on my phone...
Well, I wouldn't say that apps2sd is not ment for your phone since so many of us are using this hack (including myself) however this may be a tedious process of eliminating possible causes. I would not rule out the possibility of damaged SD card. It has happened before to many people. Re-format and re-partition your existing card first. Wipe everything off your phone, re-flash the rom of your choice (following the instructions) and see if it works. If it doesn't work - then I would look into getting a different SD card. I just received a tweet that compUSA has class 6 8GbB card with adapter for $30. I also saw something in "Dream accessories" forum in the "Promotions" thread, I believe 8GB card for $15 from Amazon. Cards are a lot cheaper then new phone, you should try that out. Good luck.
Ok.
I've now installed the AmonRa's recovery 1.5.2
Partition the card with AmonRa's recovery
Wiped data/factory
Shud I wipe dalvik-cache, battry status, and rotate settings also?
Wipe dalvik-cache, others should not matter for what you're trying to accomplish.
Ok thx.
I'll try that, if it doesnt work now, I'll buy an new sd card
So AmonRa's recovery didnt help, so I guess it's my sd card than.
Will buy an new one and test with that.
So fore now on it's low on space
Maby this time I will remember to take an backup when I have y phone the way I like, getting tierd of setting up my phone all the time
Hi there to everybody. i have a Tmobile G1 :
Installed Htc Hero Sense, Firmware version is 1.5. I have 1gb micro sd card on it when i root the phone. now i am replacing it with 8gb micro sd card.
every time i put the 8gb sd card on it, the phone keeps freezing and will not continue to boot up. i then returned the 1 gb sd card and the phone is working properly. how can i change the sd card to a bigger capacity without the phone freezing? do i have to re-root and restart the whole process on the phone? any help, guides will help. Thank you in advance.
......umm...lol..imma leave this one alone
just copy the content of the old sdcard, some Hero rom store some info there
it wont hurt to try it
also, did you have any partitions on the old sd?
partition your sd card and flash a 1.6 rom with auto a2sd
I did try to copy the whole contents of the sd card, but it does same thing, freezing and it wont boot up.
using 1 gb flash the Amon RA recovery image....and then do a Bart Backup...this backup will backup all your apps and also the rom..then put that backup file and put into the new sd card...and then go into recovery and do a bart restore....
Qjizzle said:
partition your sd card and flash a 1.6 rom with auto a2sd
Click to expand...
Click to collapse
Um...partly true but you don't need to install a 1.6 donut ROM
TO OP
You have to repartition your SD card (~7400 MB Fat32, 512 EXT3, 96-128 Swap?) whichever you want.
If you want to reinstall all your paid/free apps, then you will have to back them up on your 1 GB card using a backup app (App manager, astro) or just use Mybackuppro if you want to back up everything (contacts, data, etc)
transfer the backupped files back onto your newly partitioned 8 GB card. Boot up the phone with the new card in it, and reinstall all your apps
OR the easier way (but you lose all your data)
Partition card
wipe phone/dalvik/ etc
fresh Reinstall
The old sd card appeared to be partioned.
you need to make sure your swap and ext. partition is the same size as the one you have on your old one. ex. if your 1gb have 96swap, 512ext. then your new one should have the same swap and ext size. rest goes to fat32. First thing you should do is do a nan + ext. backup using the recovery image. Then copy everything from the old SD card to the new SD card. Then do a nan restore. That should restore everything on your phone plus whatever is stored in the ext. partition. The likely cause of your phone freezing is because the stuff in the ext. partition is not there anymore.
mr2t32 said:
you need to make sure your swap and ext. partition is the same size as the one you have on your old one. ex. if your 1gb have 96swap, 512ext. then your new one should have the same swap and ext size. rest goes to fat32. First thing you should do is do a nan + ext. backup using the recovery image. Then copy everything from the old SD card to the new SD card. Then do a nan restore. That should restore everything on your phone plus whatever is stored in the ext. partition. The likely cause of your phone freezing is because the stuff in the ext. partition is not there anymore.
Click to expand...
Click to collapse
what he said
when i got my mytouch coming from a g 1i simply did what the guy did above me and with amon_ra's recovery its very simply
The Unlockr.com has a tutorial thats very helpfull if you need a visual. I was a nubie once and visuals always helped.
I lost my sd card data flashing a rom. Could not mount it even thru recovery. Got a card reader, but it won't format it.
Using Mini Partition Tool to troubleshoot. I am not at a point where it shows three partitions. The main 16gb unallocated, logical. The ext3 unformatted 500mb, primary (think I did that by mistake when trying to recover partition). And a 32mb unallocated, logical. All zero used memory.
I need to get back to one partition allocated, primary. Then I can get sd data back on it and reformat thru recovery.
Again using Mini Partition Wizard
Any help please!
OK,
I got it repartitioned as primary and formatted, bu sd card from pc now.
Hope phone recognizes it.
Will update, if I need further help.
Ken
If you want a good program to format your sd card, try SD Formatter.
Download and install that, plug in your sdcard into your sd card reader and format it.
Choose Full Erase On (if possible) and Resize On. It will format your sdcard to factory default and that means even the ext partition will be gone too.
Well, all transferred. Still won't mount. Says can't mount either of the dev/blocks mmcb1k0p1 and mmcb1k0.
Staus bar says sd card damaged.
?????
musashiken,
Thanks, typing while you posted. Based on my last post should I still do that?
Ken
Yeah I think you should try to reformat again with the program I suggested, as that will full format your sd card.
Once done, put your sd card back to the phone and create ext partition in recovery.
At work now but will be working on it.
Thanks
Ken
musashiken,
Thanks, appreciate all your help
That program worked, and I am back up and running
Ken
Glad it worked for you. My sd card kept giving me problems and I have to use this every few rom flashes.
I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork, I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig
If sdformatter did not work it may be bad.
I always had good luck with it.
Did you have all options set per instructions?
THIS MOD IS FOR THE METROPCS VARIANTS ONLY!!!!
Most of you reading this will know me from my AdvancedStock ROM. Well This new mod I created will allow you to mount an External Partition on the external SD Card as the /data partition on the phone allowing for as much space as you want on the phone for all apps, user data, pretty much everything. This mod replaces the usual /data mount point so that the SD Card can take over. It is a little complicated to explain but here goes:
Partition: A specific area of the drive.
Mount Point: Where the Partition is mounted during or after boot.
NAND: Internal Storage
SD Card: Your EXTERNAL SD Card. (Not INTERNAL)
Your phone has whats called partitions on its internal NAND storage device (mmcblk0). This storage device holds the OS, User data, etc. This NAND is what is changed when flashing ROMs, Wiping data, etc. Your phone also has what is call mount points. Mount points, for all intents and purposes, is a sort of folder on the NAND storage that can mount these partitions so your phone boots up, can download things, run apps, etc. This mod changes the /data mount point (Where all USERDATA is stored, like apps, app data, settings, wifi, etc.) to the SD Card(mmcblk1). Doing this mod, you will have 2 partitions on the SD Card, mmcblk1p1 and mmcblk1p2. This mod, in order to be used, requires that the SD Card have TWO(2) partitions. mmcblk1p1(fat32), & mmcblk1p2(ext4). This new kernel will use the mmcblk1p2 partition to store the USERDATA by replacing the mount point that was originally mmcblk0p2 (Or something to that affect). This is done by unpacking the kernel modifing the fstab(File with a list of mount points and partitions).
So at the end of formatting the SD Card the partition table should look something (does NOT need to be exact
----------------------------------------------
| FAT32(500MB) | EXT4(28GB) |
----------------------------------------------
PARTITION 1 | PARTITION 2
mmcblk1p1 | mmcblk1p2
I hope this explination helps everyone under stand exactly what this does. This is not a apps2sd mod, this is a DATA2SD mod. ALL user data, not just apps, will be stored on the SD Card.
Wiki: https://urgero.org/626ExtData
Download: https://www.mediafire.com/?poalj63aubajkd2
Need to Factory Reset (Post MODDED KERNEL install): https://www.mediafire.com/?qaxcyhxusfc1f2u (Flash in TWRP, Not tested)
Download for latest Firmware(1.23.155.0.3): https://www.mediafire.com/?0po4jm2a6k8rx7u
Warnings:
You always run the risk of bricking a device when using non-oem firmware.
Although I have tested this extensively (And currently using it as my Daily Driver) expect bugs.
Under Settings -> Storage you will see "Unavailable/8.00GB" This is fine and can be ignored.
This can cause a bootloop if not used properly. and can Soft-Brick your device.
This process requires the phone to act AS IF it was factory data reset. But it was not. You will need to re-download all your apps, configure the phone again as if you did a factory data reset. This is required because of the new kernel. If you want to revert back to before, just flash the boot from the backup you will be making in the install steps.
Notes before installing:
1. The external data partition MUST be Partition 2 no if ands or buts!
2. This **MAY** cause some lag on the device if the SD Card is class 4 and lower, or if the SD Card is old.
3. The partition SIZES do not matter as long as there are two partitions as explained in the instructions.
4. The Wipe data function in TWRP will STILL BE MAPPED TO THE INTERNAL DATA NOT THE NEW EXTERNAL ONE SO DO NOT WIPE DATA OR FACTORY RESET WILL USING THIS KERNEL OR YOU WILL LOSE THE DATA FROM BEFORE THE KERNEL WAS FLASHED.
Install:
You need TWRP installed, so go to xda forums and install it.
Then boot into TWRP.
Select Backup.
Select Storage Device
Select Micro SD
Select All options and click "Backup"
Wait until it is done.
plug your phone in and in Windows/Linux/Mac go to your phone in a file manager then Phone\TWRP\BACKUPS\<SOME_RANDOM_NUMBERS\todays date and copy everything out of there.
Put htc626s_extData.img on the INTERNAL SD CARD.
Reboot into android and Install AParted
Open it and press the green plus button twice.
For Partition 1: Make sure the file system is fat32, this is important!!!! (Size it how you like) This is required so Android does not bug you about an unsupported filesystem.
For Partition 2: Make the file system ext4(Size it how you like)
Hit "Apply Changes"
Wait and then reboot back into TWRP.
Go to Install -> Then in the bottom right select "Install Image" and browse to the htc626s_extData.img file you downloaded and put on the internal SD Card.
Select "Boot" and install.
wait a second.
then click Reboot System.
First boot up time will be long, but after that it will boot up like a new phone!!! Dont worry, your data is still on the OLD data partition, the phone just does not have access to it.
Enjoy and profit from the new space.
Any question let me know here, PM, or whatever.
Hi, thanks for all the hard work your putting into this phone. I want to try the mod but I already use link2sd (Free version) and link some of my apps to the sd card. So I already have an ext2 partition on my sd card. Can I just flash the kernel and it boots with the second partition mounted and the apps that I already linked with link2sd, still work. Thanks again!!!
ricki13th said:
Hi, thanks for all the hard work your putting into this phone. I want to try the mod but I already use link2sd (Free version) and link some of my apps to the sd card. So I already have an ext2 partition on my sd card. Can I just flash the kernel and it boots with the second partition mounted and the apps that I already linked with link2sd, still work. Thanks again!!!
Click to expand...
Click to collapse
Unfortunately no. The mod requires a fresh ext4, not ext2, partition.
Can you take screenshot of system storage?
So partition 2 will be acting like internal storage completely or just data for apps? If its completely, couldn't I just dedicate 99% of my external card to partition 2?
---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------
Or better yet, what is the purpose of each partition?
Will you be adding more features to this Kernel in the future?
talksickisil said:
So partition 2 will be acting like internal storage completely or just data for apps? If its completely, couldn't I just dedicate 99% of my external card to partition 2?
---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------
Or better yet, what is the purpose of each partition?
Click to expand...
Click to collapse
The first partition is there so Android does not bug you about a broken SD card. The second acts as 100% internal storage AND /data.
And yes 99% of the SD card can be for this mod. Or 50% that's up to you.
Screenshot uploaded so you guys can see the amount of apps is over the amount of space this phone used to have.
Quote from OP: An extended explanation of what this mod does:
Partition: A specific area of the drive.
Mount Point: Where the Partition is mounted during or after boot.
NAND: Internal Storage
SD Card: Your EXTERNAL SD Card. (Not INTERNAL)
Your phone has whats called partitions on its internal NAND storage device (mmcblk0). This storage device holds the OS, User data, etc. This NAND is what is changed when flashing ROMs, Wiping data, etc. Your phone also has what is call mount points. Mount points, for all intents and purposes, is a sort of folder on the NAND storage that can mount these partitions so your phone boots up, can download things, run apps, etc. This mod changes the /data mount point (Where all USERDATA is stored, like apps, app data, settings, wifi, etc.) to the SD Card(mmcblk1). Doing this mod, you will have 2 partitions on the SD Card, mmcblk1p1 and mmcblk1p2. This mod, in order to be used, requires that the SD Card have TWO(2) partitions. mmcblk1p1(fat32), & mmcblk1p2(ext4). This new kernel will use the mmcblk1p2 partition to store the USERDATA by replacing the mount point that was originally mmcblk0p2 (Or something to that affect). This is done by unpacking the kernel modifing the fstab(File with a list of mount points and partitions).
So at the end of formatting the SD Card the partition table should look something (does NOT need to be exact
----------------------------------------------
| FAT32(500MB) | EXT4(28GB) |
----------------------------------------------
PARTITION 1 | PARTITION 2
mmcblk1p1 | mmcblk1p2
I hope this explination helps everyone under stand exactly what this does. This is not a apps2sd mod, this is a DATA2SD mod. ALL user data, not just apps, will be stored on the SD Card.
Click to expand...
Click to collapse
Will a 16gb SD be good enough? It looks like you're using a 32gb SD card. For ext4 partition you have it for 28gb why not 31gb? And can I make fat32 500mb as well? And since you use 28gb.. 8gb is used for nand storage? Can u give me an example for a 16gb SD card for aparted? I will like to make use of all of the 16gb SD. Thanks
kdayyy said:
Will a 16gb SD be good enough? It looks like you're using a 32gb SD card. For ext4 partition you have it for 28gb why not 31gb? And can I make fat32 500mb as well? And since you use 28gb.. 8gb is used for nand storage? Can u give me an example for a 16gb SD card for aparted? I will like to make use of all of the 16gb SD. Thanks
Click to expand...
Click to collapse
The sizes can be what ever you want. as long as the 2nd partition is ext4. thats all you really need to worry about.
But here is an example:
Partition 1:
Filesystem: fat32
Size: 500MB
Partition 2:
Filesystem: ext4
Size: 1100MB
It is really that simple. I am using a 32GB SD Card, and have it split so that there is an 8GB is fat32 for Pictures I take and other misc Windows based programs I use with my phone.
But you do what you want. But once you set the sizes and go through Android's Setup, you cannot resize them.
Man I can't wait to get to a computer and try this out. Man, with xposed finally working it really couldn't have came at a better time. I'm down to about 327 mb of free space in the internal storage.. 8gb of total internal space was a horrible decision by HTC. I understand the phone is a budget buy but 8gb is downright insulting in 2015 on a lollipop device. But let me stop that miniature rant now. I did notice that my 32gb card I bought 3 phones ago is only class 4. Hopefully it doesn't lag like you mentioned could possibly be the case.. And if it is the case, I'm going to upgrade my micro SD card to a higher storage level and class level. I really need to get this mod working, and working optimally. In my opinion, if all goes correctly it will be a major upgrade to the phone and be a solution for my single biggest issue about this phone.
talksickisil said:
Man I can't wait to get to a computer and try this out. Man, with xposed finally working it really couldn't have came at a better time. I'm down to about 327 mb of free space in the internal storage.. 8gb of total internal space was a horrible decision by HTC. I understand the phone is a budget buy but 8gb is downright insulting in 2015 on a lollipop device. But let me stop that miniature rant now. I did notice that my 32gb card I bought 3 phones ago is only class 4. Hopefully it doesn't lag like you mentioned could possibly be the case.. And if it is the case, I'm going to upgrade my micro SD card to a higher storage level and class level. I really need to get this mod working, and working optimally. In my opinion, if all goes correctly it will be a major upgrade to the phone and be a solution for my single biggest issue about this phone.
Click to expand...
Click to collapse
I'd recommend a class 6 or 10 I don't think this phone supports an SD card larger than 64GB so be warned on that aspect. A brand new card would also be better.
sandix said:
I'd recommend a class 6 or 10 I don't think this phone supports an SD card larger than 64GB so be warned on that aspect. A brand new card would also be better.
Click to expand...
Click to collapse
Thanks for the tip. Like I said, I will try it out on my current card first. I'll report back the results once I do. I just need to get to a computer already! My laptop is at my moms house. I will be over there today for the holiday. Hopefully I remember to get it. By the way merry Christmas man! Thanks again
talksickisil said:
Thanks for the tip. Like I said, I will try it out on my current card first. I'll report back the results once I do. I just need to get to a computer already! My laptop is at my moms house. I will be over there today for the holiday. Hopefully I remember to get it. By the way merry Christmas man! Thanks again
Click to expand...
Click to collapse
How'd the card react to the mod?
Thanks sandix this looks awesome. I have a class 4 sd but am going to try this when I get my class 10 in the mail. My manual says this phone supports sd cards up to 200gb. Hope I can use all that .
Wow. Yes if the phone supports 200GB then you can use 99.99% of that. (Some factors come into play like the SD card will have dead spots in it it will probably be closer to like 196GB, as well as the fat32 partition you need.) Post screenshots as well as results
Sent from my HTC Desire 626s using Tapatalk
sandix said:
How'd the card react to the mod?
Click to expand...
Click to collapse
I still haven't gotten around to the PC yet.. I'm not sure if I need this actually.. For a few days I've had xposed mod xinternal sd and well, check out the screen shot
Are you familiar with this module? I've never used it before.. But I have plenty of app space now. Finally I have everything I want installed coexisting all at the same time
No issues so far
That's a good module, but it's not doing what you think it does. It will work for awhile but you will find that you will run out of space because of apk size.
Sent from my HTC Desire 626s using Tapatalk
Thanks for the heads up. I figured it's worth a try. If I have issues I'll remove it. I updated the screenshot. It says I have 32 removable apps right now.
sandix said:
Wow. Yes if the phone supports 200GB then you can use 99.99% of that. (Some factors come into play like the SD card will have dead spots in it it will probably be closer to like 196GB, as well as the fat32 partition you need.) Post screenshots as well as results
Sent from my HTC Desire 626s using Tapatalk
Click to expand...
Click to collapse
Will do. Waiting for sd card.