You know that plastic thingie you need to open if you want to charge your phone? I had HTC S610 before and you had to open backside, remove batter and there was that little hole in which that plastic was secured.
I couldn't find anything like that on my G1. Now i bought a docking station for phone and cant put the phone on it because of that plastic thing.
And i don't want to just cut it from the phone. I think i would break my own heart with that.
Help?
Mine actually broke off at one point and all I had left was the little peice that connects to the phone. all I did was slowly pull that sucker out and it came out easily.
glock30 said:
Mine actually broke off at one point and all I had left was the little peice that connects to the phone. all I did was slowly pull that sucker out and it came out easily.
Click to expand...
Click to collapse
same here ... has happened to every phone that ive ever owned that had one lol
isn't there an elegant way to do this?
greglord said:
isn't there an elegant way to do this?
Click to expand...
Click to collapse
your can fix your phone a fancy home cooked meal, put out the good table spread, use candle light to eat your meal, then when just you and your g1 get in the bed, violently rape it with some scissors or toenail clippers or any other instrument of cutting.
If you don't want to do that then google the htc guide to disassemble your phone. it may be in there.
I ripped myne off was tired of opening and closing it. But the SD cover one fell off 3 days after i leave the Army... go figure
Mine broke off and the stem fell back into the phone. It's like it was never there. Why in the hell are you even considereing disassembling your phone just for that? You're gonna break something important. Scissors, man. Scissors.
I say do it the old fashion way, just yank it off
forget scissors just use your teeth
imbonez9 said:
forget scissors just use your teeth
Click to expand...
Click to collapse
LOL, I cut mine off with a knife
AdrianK said:
LOL, I cut mine off with a knife
Click to expand...
Click to collapse
Sounds painful. But did you remove the miniUSB cover?
Chahk said:
Sounds painful. But did you remove the miniUSB cover?
Click to expand...
Click to collapse
Oh snap! Well played, sir
If you are slow and gentle it comes out nice and easy.... o wait... we were talking about phones here... sorry...
Honestly though... slow and gentle is the way to go... maybe use some needle nose to grip it better
Related
Hello, I have still yet to take the battery cover off my HD2 since it's brand new, and I need to know the least effortless way to take it off without damaging. I have tried with the little slot by pulling up on it but haven't tried very hard and it never comes off. I'm afraid of breaking it.... Help?
Do a Google search on
"remove battery cover hd2"
PurpleLlamaLover said:
Hello, I have still yet to take the battery cover off my HD2 since it's brand new, and I need to know the least effortless way to take it off without damaging. I have tried with the little slot by pulling up on it but haven't tried very hard and it never comes off. I'm afraid of breaking it.... Help?
Click to expand...
Click to collapse
Yeah, you've got the right idea there...it's built to have tension so it takes a bit of effort to get it open. First, that little slot is indeed for your nail to help pop it open...now, when you pull on it, do it as if the opposite side (with the volume buttons) is a hinge, and the door needs to swing open like that. I place one of my thumbs on the "hinge" side, and pull up on the other. Once it snaps up about an inch, I lift my thumb and it comes right off. Putting it back on is the exact opposite...first seat the side with the volume buttons securely (this takes some practice), and then swing it closed and snap down on the notch side.
Ugh, that sounds really difficult. This is actually making me regret my decision of buying the HD2. I love everything about it but this stuipid battery cover. Why couldn't it take up the entire middle-bottom of the phone!
http://www.youtube.com/watch?v=SfemA_G2QYA
Thanks, but I can't view the movie. Shows up as a white square...
don't worry about it really, your finger isn't going to damage the metal battery cover. it just pops right off.
i hold the phone with my right hand on the top and bottom and push the slot with my left thumb, easy peasy.
I'm not worried about the battery cover, just the phone. I've had it since Wednesday and have been phoneless for the past 2 weeks...
Just pull on it its not going to damage your phone, I do it every day.
Its really not that hard to do, you're making it a bigger deal than it actually is. Its made out of metal so I think you will be ok.
come on purple lama lover! just do it; don't be a pink lama
This thread, coupled with this post from another thread:
PurpleLlamaLover said:
I'm very meticulous when it comes to cosmetics. At night, when I'm not using my phone I wrap it in a lint free sunglass cloth, then in a layer of bubble wrap, then in a small bubble wrap lined packaging envelope, then in a larger bubble wrap lined shipping envelope, and then in a prefectly sized cardboard box that I put very carefully in a drawer. Lol, but the case and all it's openings fit perfect.
Click to expand...
Click to collapse
Makes me believe that you may need to see a doctor. Your worries are baseless and way too superficial.
You're regretting buying the HD2 because of the battery cover? For real? Definitely don't get an evo then. That one feels like it could snap at any moment when you try to take it off. At least the HD2's is metal.
This is a joke, right? How are you going to damage a metal battery cover? What are you using to take it off, The Jaws of Life?
Just take it off. You won't damage it at all. I know it feels like its just going to rip apart but the HD2 can take it
Guys, Please don't feed the troll.
FlawlesStyle said:
This thread, coupled with this post from another thread:
Makes me believe that you may need to see a doctor. Your worries are baseless and way too superficial.
Click to expand...
Click to collapse
WOW...if it rings your wouldnt even be able to hear it much less get it out in time to answer the call...
PurpleLlamaLover said:
Ugh, that sounds really difficult. This is actually making me regret my decision of buying the HD2. I love everything about it but this stuipid battery cover. Why couldn't it take up the entire middle-bottom of the phone!
Click to expand...
Click to collapse
"UGHH thats difficult".....This guy / gal is really sad
LOL... This is hilarious!
This is what works for me
1) Phone face down
2) Stick your fingernail in the bottom left corner of the metal cover and lift it up. Voila.
Pocketnow technique didn't really work for me. Almost felt like I was going to break it.
There seriously is a thread about how to remove the battry cover???
I cant belive i just wasted my time in reading it WOW!!!!
Hi guys,
Has anyone tried to remove the silver AT&T logo from behind the glass? Thinking about giving it a go but thought I would check to see if anyone else had given it a shot and had any pointers.
Thanks,
Krisbo
Electrical tape
mcord11758 said:
Electrical tape
Click to expand...
Click to collapse
Lol, that would look awful! I was thinking I would fully disassemble it and use spray paint.
Wow that its dedication to the cause. Yea honestly I got nothing
Krisbo said:
Lol, that would look awful! I was thinking I would fully disassemble it and use spray paint.
Click to expand...
Click to collapse
i take no responsibilty for this, but I used paint thinner(gun wash actually seeing as I work at a paint shop lol) and rubbed it off my old phone, quite easily actually.
I personally would try that before spray paint...
Get a cover that covers it
U can't see the logo this way, and u r still covered by warranty just in case.
Be careful with 'paint thinner', there is more than one kind. I'd start with rubbing alcohol, then acetone, progress to mineral spirits, then if that doesn't work try some MEK(methyl ethyl ketone). You can quickly melt away any plastics or finishes if you use too strong a product first time out.
hey, i was wondering if any one was successful in removing their engravings off the back of the nexus one..... i bought mine cheap second hand, but i can't seem to get the engravings off... thanks!
Maybe if you look up in the dictionary of what "engrave" means you'll find your answer. Then again is it possible to un-grave something? Put a cute little sticker over it or something.
Die grinder.
plastic filler
superfine sandpaper
paint
cover engravings with the filler
let it dry
sand down the filler until it's flush with the rest of the phone
wipe off with a wet rag (let dry after)
paint
depending on your painting skills you can make it look halfway decent. You won't make it like new though. The only way to make it not like terrible would be to paint the entire part of the phone where it is engraved. Since the engravings are on the chrome, looks like a whole body job to me.
Good Luck
Update:
Also, seriously you can't google? You do own their phone...
http://www.ehow.com/how_7774043_remove-engraving-nexus-one.html
I'd do this instead.
Toothpaste or Chocolate to wear it down.
Deekayy said:
Maybe if you look up in the dictionary of what "engrave" means you'll find your answer. Then again is it possible to un-grave something? Put a cute little sticker over it or something.
Click to expand...
Click to collapse
sorry, engrave may not be the correct word to use. this is probably laser etching. i'm talking about the etching that google did for people who wanted to customize their phones.
XSafire said:
plastic filler
superfine sandpaper
paint
cover engravings with the filler
let it dry
sand down the filler until it's flush with the rest of the phone
wipe off with a wet rag (let dry after)
paint
depending on your painting skills you can make it look halfway decent. You won't make it like new though. The only way to make it not like terrible would be to paint the entire part of the phone where it is engraved. Since the engravings are on the chrome, looks like a whole body job to me.
Good Luck
Update:
Also, seriously you can't google? You do own their phone...
http://www.ehow.com/how_7774043_remove-engraving-nexus-one.html
I'd do this instead.
Click to expand...
Click to collapse
i did google and i tried that already. didn't even scratch the surface. and the surface is not chrome, its anodized aluminum. which is a pain in the butt to work with...
Jyveafk said:
Toothpaste or Chocolate to wear it down.
Click to expand...
Click to collapse
i tried the sugar cubes, but i believe thats only for silkscreened logos. i doubt either of these will be able to get the laser etched letterings. thanks though.
anyone else who was able to remove the personalized lettering on the back of the N1?
19.95$ back cover on ebay (real one)
The engraving isn't on the back cover, it's on the metal chassis.
Can you not buy a replacement chassis?
Sure you can, but they're not cheap, and I suspect it's a fair bit of work to swap the parts over.
First, it is important to note that the "engraving" is NOT actually engraved in, as some people here seem to believe.
It is merely silk-screened on.
As for removing it, I would suggest a mild abrasive, like tooth paste, and rubbing it with a cotton cloth... it will probably take a lot of elbow grease, but it should work!*
*Note: not responsible if you damage your phone or kill your loved ones with this method.
ngy said:
i did google and i tried that already. didn't even scratch the surface. and the surface is not chrome, its anodized aluminum. which is a pain in the butt to work with...
Click to expand...
Click to collapse
my bad. If you scratch it with your fingernail, can you feel a groove?
GldRush98 said:
First, it is important to note that the "engraving" is NOT actually engraved in, as some people here seem to believe.
It is merely silk-screened on.
As for removing it, I would suggest a mild abrasive, like tooth paste, and rubbing it with a cotton cloth... it will probably take a lot of elbow grease, but it should work!*
*Note: not responsible if you damage your phone or kill your loved ones with this method.
Click to expand...
Click to collapse
can't say its silkscreen for sure. i took a look under the microscope and its retains the same texture as the rest of the aluminum... silkscreened letterings SHOULD have a different, smooth texture.
XSafire said:
my bad. If you scratch it with your fingernail, can you feel a groove?
Click to expand...
Click to collapse
yeah i do feel a slight bump. so i'm led to think its silkscreen or laser etched, leaning more towards laser etching... which means im stuck.
Rusty! said:
Sure you can, but they're not cheap, and I suspect it's a fair bit of work to swap the parts over.
Click to expand...
Click to collapse
i think i may actually do this in the end. i was suggested to use "contact cleaner" as it deoxides materials... but thats precisely what anodized aluminum is... a thicker layer of colored aluminum oxide. it may just strip it all down to the bare aluminum... argh thinking out loud.
I have heard from someone who have tried the same thing known as Contact Cleaner. Haven't tried personally so can't say for certain but hey, what's the harm in trying it out? I don't have any personalization otherwise would have tried it out.
creativedevil said:
I have heard from someone who have tried the same thing known as Contact Cleaner. Haven't tried personally so can't say for certain but hey, what's the harm in trying it out? I don't have any personalization otherwise would have tried it out.
Click to expand...
Click to collapse
really. contact cleaner can really get the thing off? i should try and get my hands on some then, rather than spending $60+ for a new housing. was thinking of sand blasting the whole thing too... and painting it all back. lol. all black nexus.......
ngy said:
really. contact cleaner can really get the thing off? i should try and get my hands on some then, rather than spending $60+ for a new housing. was thinking of sand blasting the whole thing too... and painting it all back. lol. all black nexus.......
Click to expand...
Click to collapse
Please don't do this.
just sand down the aluminum until it is flush with the rest of it, then use different grades of paper until it is smooth
I don't exactly know how close to perfect you can make it, but it's better then sandblasting it.
ngy said:
can't say its silkscreen for sure. i took a look under the microscope and its retains the same texture as the rest of the aluminum... silkscreened letterings SHOULD have a different, smooth texture.
Click to expand...
Click to collapse
I am 99% sure it is silk-screened on, in a similar manner to the Google and HTC logos on the back.
GldRush98 said:
I am 99% sure it is silk-screened on, in a similar manner to the Google and HTC logos on the back.
Click to expand...
Click to collapse
i sure hope so. i think im gonna try the contact cleaner stuff thats been mentioned. while i have my doubts.... i guess i'll just give it a shot. anyone know what removes silk screening?
I think you would damage the surface of you phone.
Put a sticker over it instead.
After sometime i've started noticing that the battery cover squeeeks specifically if the backside is facing you the left middle part of the back cover squeeeks if you press it it is loose or squeeks is that normal?
Mines the same, pretty annoying, had to put some electrical tape for a tighter fit.
how / where did you put it?
baste07 said:
how / where did you put it?
Click to expand...
Click to collapse
Where the squeek comes from. or try bluetack
i mean you place it inside the cover or externally?
Internally on the inside of the cover
Thanks. I'm going to think about that method
Sent from my HTC Incredible S using XDA Premium App
Same thing on mine. Just put on a case, and no more squeaks!
Same I got a cover for the phone. The tight fit stopped the squeek
Sent from my HTC Incredible S using XDA Premium App
i have capdase and i still had the squeek, i put in fillers inside the phone and no more squeeks. hopefully my ottercase gets here so that i can take the filler out already.
baste07 said:
i have capdase and i still had the squeek, i put in fillers inside the phone and no more squeeks. hopefully my ottercase gets here so that i can take the filler out already.
Click to expand...
Click to collapse
I have the CaseMate Barely There atm, and it got rid of the squeak completely. Altho, it wasn't really a squeak in my case. It was more of a popping sound.
baste07 said:
i have capdase and i still had the squeek, i put in fillers inside the phone and no more squeeks. hopefully my ottercase gets here so that i can take the filler out already.
Click to expand...
Click to collapse
For what it's worth, I use the Otterbox Commuter and the squeak is still there. I'm seriously considering flashing back to stock and returning the phone for repair or replacement. I know its a small issue but I am also getting 5 second drop outs when on calls.
Close the battery case properly and you will have no squeek. Nothing by me
So does the noise go off after putting the tape inside/outside? Does it look ugly>?
sreeman said:
So does the noise go off after putting the tape inside/outside? Does it look ugly>?
Click to expand...
Click to collapse
Put some electrical tape on the inside of the cover where it squeeks.
Ugly? You don't see it since it's on the inside.
wlkoff said:
Close the battery case properly and you will have no squeek. Nothing by me
Click to expand...
Click to collapse
how long have you had the unit? if you flash and take the battery out once in a while the squeek will come up eventually.
and "close the battery case properly".... how many ways can you close it.
I am going to get a cover for the phone soon but for a temporary fix, I placed a paper peice on the top right side and no more creeking
baste07 said:
how long have you had the unit? if you flash and take the battery out once in a while the squeek will come up eventually.
and "close the battery case properly".... how many ways can you close it.
Click to expand...
Click to collapse
I have taken it off many times and put it on wrong and it squeeked and put it on a diff way and it went on completely. weird.
i placed some stickies as well and using it now with otter commuter, no squeeks hopefully don't need to tke the battery off anymore.
neo-X said:
Mines the same, pretty annoying, had to put some electrical tape for a tighter fit.
Click to expand...
Click to collapse
Same! So annoying having a squeaky phone. Tape did seem to do the trick though
Do you think the speaker grill will pop off in the future? I just realized mine has quite a gap, you can slide a paper in.
But I don't want to resort to warranty since I have already been using it for a month plus, and got stuff working and all.
The grill I have in question is the bottom one.
I don't know how strong the glue supporting the bottom grill is.
if it comes off, stick it back on with superglue
IINexusII said:
if it comes off, stick it back on with superglue
Click to expand...
Click to collapse
Love it! :silly:
snowblind2142 said:
Love it! :silly:
Click to expand...
Click to collapse
my almost gapless phone is now showing gaps n getting bigger everytime i look at it.. But.. Meeeh
IINexusII said:
if it comes off, stick it back on with superglue
Click to expand...
Click to collapse
Haha true.. But I wonder how hard it might be to glue it back together, I'm really bad with this kind of things.
fluxthesky said:
Haha true.. But I wonder how hard it might be to glue it back together, I'm really bad with this kind of things.
Click to expand...
Click to collapse
the method of heating the grill and clamping it down (was a thread about it somewhere) is probably an option to try. i might try it on mine too since the gaps are getting big..
IINexusII said:
the method of heating the grill and clamping it down (was a thread about it somewhere) is probably an option to try. i might try it on mine too since the gaps are getting big..
Click to expand...
Click to collapse
Dang.. That sounds kind of too much for me. I guess I just gotta put my faith on HTC's glueing process or hopefully it pops off at least before my warranty.
yea..just use superglue..
i use those very liquid glue to stick it back..now its gapless...just apply very very little and its enough..
just wanna avoid the liquid from dripping to the speaker girll..^^
randykzc said:
yea..just use superglue..
i use those very liquid glue to stick it back..now its gapless...just apply very very little and its enough..
just wanna avoid the liquid from dripping to the speaker girll..^^
Click to expand...
Click to collapse
Wow did your grill pop out? Or did you replace them intentionally.
fluxthesky said:
Wow did your grill pop out? Or did you replace them intentionally.
Click to expand...
Click to collapse
nono...my grill did not pop out..its just that there is gap there..i just use glue to glue it ..now its gapless..^^
randykzc said:
nono...my grill did not pop out..its just that there is gap there..i just use glue to glue it ..now its gapless..^^
Click to expand...
Click to collapse
Wow how did you managed to get the glue inside the gap? I mean I know it's quite a gap, but I don't think it's THAT wide to be able to squueze glue in..
Are the gaps really that much of a concern? I have a bit of a gap on the top speaker grill, but I have a case on the phone too. I don't even notice it now. I'm more concerned about the durability of "Gorilla Glass." I've had 3 iPhones now and I've never scratched my screen. I've owned the HTC One for a month and I've got two scratches already...
fluxthesky said:
Wow how did you managed to get the glue inside the gap? I mean I know it's quite a gap, but I don't think it's THAT wide to be able to squueze glue in..
Click to expand...
Click to collapse
thats why u have to use liquid glue..just apply a little the on gap and quickly press the grill to close the gap
and of course quickly wipe off the glue that you pressed out..
randykzc said:
thats why u have to use liquid glue..just apply a little the on gap and quickly press the grill to close the gap
and of course quickly wipe off the glue that you pressed out..
Click to expand...
Click to collapse
Ahh sounds idiotproof.. mind telling us what specific liquid glue did you use? I might do this in the future.
T5BRICK said:
Are the gaps really that much of a concern? I have a bit of a gap on the top speaker grill, but I have a case on the phone too. I don't even notice it now. I'm more concerned about the durability of "Gorilla Glass." I've had 3 iPhones now and I've never scratched my screen. I've owned the HTC One for a month and I've got two scratches already...
Click to expand...
Click to collapse
For me it's more of a durability thing. I'm just afraid it will pop out from the glue losing it's strength in the future.
randykzc said:
thats why u have to use liquid glue..just apply a little the on gap and quickly press the grill to close the gap
and of course quickly wipe off the glue that you pressed out..
Click to expand...
Click to collapse
Well, if you're gonna use instant glue, you're prolly gonna end up sticking your fingers to the thing... so.
It might work if you have someone else hold it upside down and you're REAL careful.
The warranty is there for a reason. Use it.
Sent from my Nexus 4 using xda app-developers app
Haha superglue works!!! Now my phone is gapless again.. Super WIN
NexusF said:
The warranty is there for a reason. Use it.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
15 bucks for shipping, plus 1-2 weeks w/ no phone, ntm the chances of getting a refurb and/or defective device.
I've heard some really bad horror stories, like trading in phones >3 times.
fluxthesky said:
Ahh sounds idiotproof.. mind telling us what specific liquid glue did you use? I might do this in the future.
Click to expand...
Click to collapse
i use Loctite super glue..i think it drys pretty fast..so after apply have to immediately close the gap and wipe off the glue..
http://www.loctiteproducts.com/p/4/2/sg_bottle/overview/Loctite-Super-Glue-Longneck-Bottle.htm