Related
I've got a few questions, hope no one minds answering. If it's a simple case of RTFM then lock the thread and trash.
1. I've rooted and am using the latest JF build but when I go to telnet I can't connect to localhost anymore. Is this normal?
2. I'm running stock SPL and Radio (not too sure what the radio is btw). Is it best I update before flashing anymore roms?
3. I'm wanting to flash to Cyanogen Mod rom, it looks a lot more complex than simply renaming the rom to update.zip then flashing. Is it safe to assume that there is a lot more work to do? (if so a general point in the right direction would be greatly appreciated).
I really appreciate any help.
Thanks
1. I'm not sure as it has been some time since I last used JF's build I'm afriad...
2. Its advisable at the very least to upgrade your radio (look at my signature for a link). You can upgrade your SPL too providing you have flashed the latest radio FIRST and that you are on a PVT motherboard.
Boot into the SPL to find that out (turn off/reboot the mobile, Hold CAMERA+POWER). It should say at the top.
3. To use Cyanogen's ROM its like flashing any other ROM. Just make sure you have the latest Radio FIRST. Also I believe it works fine for non Apps2SD users so no need to partition your SD card etc to use it.
Hope that helps.
Stock SPL? do you mean HARDSpL?
alritewhadeva said:
Stock SPL? do you mean HARDSpL?
Click to expand...
Click to collapse
Unless it was updated while rooting it's probably "G1 Original SPL"
Thanks NeoBlade, I'll update the radio and spl tomorrow then probably try and get nandroid running so I've got a backup in case anything goes wrong.
No worries digital, just do your usual pre-checks before flashing the SPL and remember Radio first ^_-
You'll enjoy the new features and performance improvements using the latest cooked ROMs out there. Most of the info is in my signature but you can also flash the new Recovery image too by Cyanogen (http://forum.xda-developers.com/showthread.php?t=523558).
Not only can you create a Nandroid backup from there, you can also restore it too all from your mobile ^_^
Not to be an @ssh*le, but if you root your phone don't you already have the HardSPL? If you follow Koush's guide you were told to flash the HardSPL which isn't the stock SPL at all. Care to shed some light on this?
He could have had the engineering SPL, I remember having that briefly myself in the early days. The main thing is that he just wants to run Cyanogen's ROM so as long as he updates the radio and flashes the ROM without issues it should be fine. Unlike some Hero ROMs it doesn't require the latest SPL to create space for the ROM.
Granted though, its often always nice to have the latest stuff ^_-
Ok well if you DECIDE to update to the latest radio and SPL just go to my guide below and go to the second post. That will tell you how to install the radio and spl updates!
Good luck!
Indeed ^_^ And once that's done, perhaps change the title to SOLVED so people know. We shall have to wait for digital to get back to us about it.
This is the guide I used:
http://haykuro.theiphoneproject.org/?page_id=35
Sorry alritewhadeva:
I'm on the HardSPL so I guess I don't need to bother updating that again. I didn't get to the point where it said to update to the newest radio.
Reading a bit further it also says that I can do a backup easily using adb which is already setup. At some point in the process it must have installed the things needed for nandroid backup. I think it was the recovery.img part.
Thanks for the great link Nephron, I used it before to setup adb on my netbook (running win7 on my main machine).
Before I flash the latest radio is it safe to do this *after* updating the spl?
Thanks for all the great help, I really appreciate it.
As a thumb of rule, always flash the radio first before the SPL and the ROM.
Tell us how it goes ^_^ If you've managedto do it, could you please edit the title then to add SOLVED? Good luck.
Soo do you have to flash the radio and SPL everytime you want to flash a rom??? i already have the latest radio, i just want to make sure i dont make a mistake
Tr1n1Jay said:
Soo do you have to flash the radio and SPL everytime you want to flash a rom??? i already have the latest radio, i just want to make sure i dont make a mistake
Click to expand...
Click to collapse
No you don't. Only once... then kind of keep an eye on the forum to see if better radio or SPL comes along. So far I had to update my radio once. What recovery image do you have (home+power), is it still JF1.43? You should update that to CM 1.4, you get a lot more flexibility with that... read up on it in development forum. All in all, unless you plan to install Hero anytime soon (and I personally don't recommend it, too slow and buggy) you should be good with (in that very order)
1. Flashing newest RADIO (Haykuro has it in the link you provided, only need to do it once and you already did it!)
2. Flashing HardSPL (you already did that too! no need to do it again)
2. Updating your Recovery Image (once more, this only needs to be done once)
After that - flash any rom you feel like at any time you feel like doing it.
Hope that helps, good luck!
I agree with everything borodin1 said. If you're on a 1.5 ROM you really should have the new radio already, but you can always go back and flash it. Afterwards you'll want hard SPL or haykuro's. Haykuro's is what you'll need for most HTC based ROMs (Hero, Rogers). Most people brick when flashing Haykuro's ROM because they don't read. Aslong as you have the new radio and a PVT phone (go to the bootloader - home + camera - and it should say PVT) you will be fine.
Hey all!
i have some questions to this app:
http://www.cyrket.com/package/org.zenthought.flashrec
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
1. does it works on T-Mobile D G1 with any FW? or also only with RC29 or RC7?
2. is flashing "HardSPL" or "DangerSPL" a musthave or can i use the original SPL (iam scarry to flah SPL)?
3. when i restore the backup do i have the full original t-mobile D delivery version of my G1?
4. how i restore the original recovery.img
5. if needed, how do i restore the original SPL
6. do i need to flash the Radio manual or do the apk make this
7. is this the right order?
- download apk
- install apk
- download CyanogenMod v4.0.1
- save as update.zip on SD root
- execute apk
- create backup
- flash Cyanogen recovery 1.4
- reboot into the new
- flash CyanogenMod v4.0.1
- Wipe
- boot G1
- download new Radio
- copy Radio as Radio.zip to SD root
- update Radio via Cyanogen recovery 1.4
- done
- boot G1 (now i have a rooted G1 with CyanogenMod v4.0.1)
please correct me if the is anything wrong or if i missed any step!!
iam "noob" with android - but i hope not for a long time
As a N00b you should at least read the Sticky posts, like http://forum.xda-developers.com/showthread.php?t=528334 this one...
It's called:
"Don't Start A New Thread - Dream Questions & Answers Here!"
All questions should be posted in the Q&A Section. I'm not too familiar with the 1-click rooting since it's been out for less than 72hrs so from what I've heard the 1-click root flashes cyan's recovery for you so all you have to do is this:
-Download and flash newest radio
-Download and flash Hard SPL
-Wipe
-Download and flash CM v4.0.1
If you do it in this order I'm 99.99999% sure you won't brick your phone, but once again please post all future question in the Q&A section
dubbeld00 said:
As a N00b you should at least read the Sticky posts, like http://forum.xda-developers.com/showthread.php?t=528334 this one...
It's called:
"Don't Start A New Thread - Dream Questions & Answers Here!"
Click to expand...
Click to collapse
if to correct me, iam not a totaly noob - iam only noob in flashing android i allready flashed two HTC Wizard to a german Windows 6.5 Beta 2 and they works perfectly only a bit slower as with mobile 5.0
bluedragon1982 said:
Hey all!
i have some questions to this app:
http://www.cyrket.com/package/org.zenthought.flashrec
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
1. does it works on T-Mobile D G1 with any FW? or also only with RC29 or RC7?
2. is flashing "HardSPL" or "DangerSPL" a musthave or can i use the original SPL (iam scarry to flah SPL)?
3. when i restore the backup do i have the full original t-mobile D delivery version of my G1?
4. how i restore the original recovery.img
5. if needed, how do i restore the original SPL
6. do i need to flash the Radio manual or do the apk make this
7. is this the right order?
- download apk
- install apk
- download CyanogenMod v4.0.1
- save as update.zip on SD root
- execute apk
- create backup
- flash Cyanogen recovery 1.4
- reboot into the new
- flash CyanogenMod v4.0.1
- Wipe
- boot G1
- download new Radio
- copy Radio as Radio.zip to SD root
- update Radio via Cyanogen recovery 1.4
- done
- boot G1 (now i have a rooted G1 with CyanogenMod v4.0.1)
please correct me if the is anything wrong or if i missed any step!!
iam "noob" with android - but i hope not for a long time
Click to expand...
Click to collapse
Yes, this app worked perfectly for me ( cuz I dun wanna waste my time doing all the porcess of pulling the firmware back to RC29 ). If u have the latest radio, then just execute the .apk, turn off your phone right after doing all the required process from that app ( back up current img then Flash the 1.4 img from Cyanogen I remember ), then go into recovery mode and you have the newest recovery img. (Remember to put the CyanogenModv4.0.1 to your SD first). Then Wipe and Flash the update, and you're done
and it works without flashing SPL????
bluedragon1982 said:
and it works without flashing SPL????
Click to expand...
Click to collapse
ARE you NOT getting IT ..........
YOU need TO ask YOUR questions IN the Q&A section....
THIS is THE development SECTION
dan0zone said:
ARE you NOT getting IT ..........
YOU need TO ask YOUR questions IN the Q&A section....
THIS is THE development SECTION
Click to expand...
Click to collapse
thx for moving
now the next ry to get good anwsers and not so stupid answers like the one form dan0zone
hard spl will not brick your phone. it is needed to flash roms from other regions than yours. hard spl is a good thing to have. also with it you can flash nandroid back ups and you can change your splash screen to further personalize your dream. enough said... go download it. flash it. if you have to wipe, then wipe. if you don't like wiping then you should not have rooted in the first place.
but to use this tool have id need to flash the SPL or works it with the original SPL too? in the manual and one the youtube video- there is no info about a need to flash the SPL.
all i want to know is:
can i just install this app, flash the new radio, run the backup, flash recovery, flash CFW, and iam done or not
yes you can do that. afterwards i would recommend flashing the hard spl.
you do not have to flash it, but it would be a good thing.
david1171 said:
yes you can do that. afterwards i would recommend flashing the hard spl.
you do not have to flash it, but it would be a good thing.
Click to expand...
Click to collapse
thanks, should i flash the radio befor i try to root my G1 with the 1-click rooting? or after i flashed the custom FW?
I used the "1-click root"
I followed all the steps and my phone is working fine, but how can you tell if its rooted?
Also, if it is rooted and I wanted to install the most current cyanogen ROM, do I have to install the new radio and SPL files?
Thanks in adv for putting up with my N00Bness.
what build do you have now? rc33? i would first update the radio. i would not mess with the newer spl as it has been known to brick phones. also did you install cynogen's recovery image? turn phone off then hold power button and home key when you turn it on to put you back into recovery image. it should say cynogen recovery 1.4 on top. it will have a number of options on the bottom nandroid backup, restore nandroid etc. if that cynogen"s recovery image is on the phone its rooted. after you flash the latest radio, i would flash jf 1.51 build then cynogens latest build. i heard the going to cynogens latest build will cause a bootloop if your not coming from another modded build.
kaws666 said:
I followed all the steps and my phone is working fine, but how can you tell if its rooted?
Also, if it is rooted and I wanted to install the most current cyanogen ROM, do I have to install the new radio and SPL files?
Thanks in adv for putting up with my N00Bness.
Click to expand...
Click to collapse
To tell if the phone is rooted, download terminal emulator from the market and type su at the prompt. If the phone is rooted, the prompt should go from a $ to a #. If not, you will get a permission denied error message. If that is the case, probably go the old fashion way of rooting
http://forum.xda-developers.com/showthread.php?t=548924
As far as the SPL and radio, you don't need the danger SPL (haykuro's) but you will need to engineering SPL or hard SPL to install custom ROMs. As far as the radio, you want to latest radio to improve calls, bluetooth, etc.
hi im also new..
i did the 1 click root too. i did the back up, then flashed the 1.4. then the nandroid backup, then wiped the data, then flashed cyanogens 4.0.1. so im pretty sure im rooted.. and everything works too! except myfaves and the native im app.
but whats this about the radio? do i have to update that? i havent messed with the radio at all.. what are the dangers in this? if any?
and i haave no clue what the hell spl is lol
roadrunnerx7 said:
hi im also new..
i did the 1 click root too. i did the back up, then flashed the 1.4. then the nandroid backup, then wiped the data, then flashed cyanogens 4.0.1. so im pretty sure im rooted.. and everything works too! except myfaves and the native im app.
but whats this about the radio? do i have to update that? i havent messed with the radio at all.. what are the dangers in this? if any?
and i haave no clue what the hell spl is lol
Click to expand...
Click to collapse
SPL info:
http://forum.xda-developers.com/showthread.php?t=455860
Radio info:
image file for controlling wireless/radio signal, runs at layer underneath android
Source: http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_overview_and_useful_information
Please guys, try to use the search function...pretty please.
definetly flash the radio, it made my speaker a lot louder!
My current build never changed. Its still CRC1 :/
I just tried the terminal emulator command and typed su and it said permission denied :/
What SPL and radio should I flash after I root of course?
DirectMatrix said:
SPL info:
http://forum.xda-developers.com/showthread.php?t=455860
Radio info:
image file for controlling wireless/radio signal, runs at layer underneath android
Source: http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_overview_and_useful_information
Please guys, try to use the search function...pretty please.
Click to expand...
Click to collapse
thank you!
Hi to one and al
I hope i am allowed to post a new thread on this. I live in Ireland but have a
G1 which is from the good uld U.S.A. I did a week of reading on how to root my phone and got some great advice on this forum.
I rooted my phone last night, using the 2 part video on Youtube and i followed
every step to the letter, i think its worked because my phone still does haha,but i dont see any benefits if anything i have less.
I did the rooting of the phone and then put the U.K RC8 on to it i its the
jf 1.42 i think. Anyway, thats ok but i didnt know there was a jf cupcake 1.5 out i got the jf updater and its found the jf 1.51 cupcake UK and a jf RC9 v.1.43 UK and also an update.zip
Now i have not downloaded any of these yet, Question... Do i download and apply the proper 1.5 radio from the android site and apply that then download the 1.5 UK cupcake and apply that.
Any help would be appreciated as i dont want to **** it up now cheers
mazzano4 said:
Hi to one and al
I hope i am allowed to post a new thread on this. I live in Ireland but have a
G1 which is from the good uld U.S.A. I did a week of reading on how to root my phone and got some great advice on this forum.
I rooted my phone last night, using the 2 part video on Youtube and i followed
every step to the letter, i think its worked because my phone still does haha,but i dont see any benefits if anything i have less.
I did the rooting of the phone and then put the U.K RC8 on to it i its the
jf 1.42 i think. Anyway, thats ok but i didnt know there was a jf cupcake 1.5 out i got the jf updater and its found the jf 1.51 cupcake UK and a jf RC9 v.1.43 UK and also an update.zip
Now i have not downloaded any of these yet, Question... Do i download and apply the proper 1.5 radio from the android site and apply that then download the 1.5 UK cupcake and apply that.
Any help would be appreciated as i dont want to **** it up now cheers
Click to expand...
Click to collapse
Yes update your radio. Its not a must but highly recommended otherwise you might have some issues. Also I would recommend a different rom cause JF's are to old and boring. I would suggest one of Cyanogens rom's.
thanks for reply, i dont have to downgrade the fone again do i, can you tell me which cyanogen rom i should download and do i need another compatible radio, i am a bit phased about diong this again especially after reading so many bricked fones but i do reaserch and listen so any help would be great
Jf stopped making roms so go with cyan stable 4.04
hey Gridlock hows it going.
ok forgive my ignorance i am looking for this rom and cant find it, also do i have to download a radio for that cyanogen release and apply that first,, also do i wipe the sd card before i start this
hope i havent made things more difficult,
and just one other thing when i did the root of youtube i didnt get an option to "protect my root" as i have read on some other guides.
thanks
edit found a post by nephron will have a read through that, but still need to know about the "protect my root" thing and do i wipe the sdcard?
You don't have to worry about protecting your root, nephron guide is a good way to go, you can pick up any rom and the most up to date in the dev section
I am doing good by the way
mazzano4 said:
thanks for reply, i dont have to downgrade the fone again do i, can you tell me which cyanogen rom i should download and do i need another compatible radio, i am a bit phased about diong this again especially after reading so many bricked fones but i do reaserch and listen so any help would be great
Click to expand...
Click to collapse
You won't have to downgrade again. You should update to the newest radio (26I) if your not already. You can do that before or after loading a new rom it doesn't matter. You can look in the dev section for cyanogen he has a stable and experimental build.
thankyou kindly gents will follow that advice
If you haven't already you need to install Cyan's recovery 1.4
http://forum.xda-developers.com/showthread.php?p=3915123
CyanogenMod Stable
http://forum.xda-developers.com/showthread.php?t=537204
Radio
http://sapphire-port-dream.googlecode.com/files/ota-radio-2_22_19_26I.zip
Damn, I just saw a pig fly, there is three out of 5 of us smartasses and we are being helpfull and not going off topic, it's gonna be a scary day
Wait, didn't I just go off topic with this post
Whoops......sorry
/sigh
and we was doing so good.
sorry gents just one more thing i am a little confused
i have the new rom new radio new spl and new recovery(cyanogenrecovery)
have renamed the the rom to update.zip
do i put the new cyanogen recovery on b4 i do the new flash or leave my old jf one one
sorry guys and thanks
mazzano4 said:
sorry gents just one more thing i am a little confused
i have the new rom new radio new spl and new recovery(cyanogenrecovery)
have renamed the the rom to update.zip
do i put the new cyanogen recovery on b4 i do the new flash or leave my old jf one one
sorry guys and thanks
Click to expand...
Click to collapse
Doesn't matter, flash the ROM or recovery in whatever order you want. ROMs don't require a specific, recovery. Just use the one you want to use, 1.4 has the most features.
gridlock32404 said:
Damn, I just saw a pig fly, there is three out of 5 of us smartasses and we are being helpfull and not going off topic, it's gonna be a scary day
Wait, didn't I just go off topic with this post
Whoops......sorry
Click to expand...
Click to collapse
Haha, shocking isn't it?
thanks for that
right i am ok with that, now i know to flash the radio first do i also have to flash this spl i downloaded its called danger spl (dont like the fookin sound of that!!) this nephron guide is very confusing
sorry lads but this is not happening i put the rom onto sd card home and power and its just coming up with a load of mad writing and like a fingerprint gives me the options but when i choose to install it say it cant install as it cant find the rom on sd card, says directory doesnt exist
i am getting to the stage of unrooting here as i dont want to fcuk my fone up
anyone help, and that nephron guide is just too confusing
As long as you don't plan on flashing any hero roms then you don't need dangerSPL. I don't recommend doing the hero roms or dangerSPL until you have a very good understanding of the cupcake/donut roms first.
sorry i have it, i had the file extensions hidden on my new laptop so the re naming was incorrect, sorted now thanks
Ok I've done the 1 Click Root process. The problem is, I totally UNrooted my phone before I did the 1 click root. I tried to load a Hero rom I got off the www.theunlockr.com website but I had to update the SPL which bricked my phone. I did wipe first so thats not the problem. I don't know what went wrong when I bricked my phone. I am getting a new from t-mobile(I kinda told them the donut 1.6 update screwed my phone up).
Now I want to root again with the 1 click but do I need to go back to the original build RC29 build or whatever it was in order to root with the 1 click ? And when I flash to a new rom do I need to update the SPL again?
READ FIRST!! I dont know where so search. I dont feel like finding you all the guides warnings and post about it. There are many precautions to take while flashing hero and even if you follow all of them to the "T" you still have a big chance of bricking your phone so use the Search Bar
nickryan0612 said:
READ FIRST!! I dont know where so search. I dont feel like finding you all the guides warnings and post about it. There are many precautions to take while flashing hero and even if you follow all of them to the "T" you still have a big chance of bricking your phone so use the Search Bar
Click to expand...
Click to collapse
The thing is I've flashed all sorts of rom's before, but I wanted to try the 1 click rooting process. I think what happened is I flashed the SPL before I flashed the updated radio. I was doing some research on the whole thing. I flashed the SPL first.
if you use the DREAIMG.nbh to go back to rc-29, it is really easier to use the telnet commands then it is to root with the one click imo, you can use one-click root, but you have to find the newer version of the recovery flasher, and if you use it and don't flash a custom rom, then the system will overwrite the custom recovery image with the stock one. if you use the telnet commands then you will overwrite the stock recovery image with a custom one, so the telnet commands are more stable
to update your spl, make sure you have a pvt board in bootloader (camera and power) and that your radio is 2.22.19.26I (make sure you have that radio, not just assume after you flash it) then you can get rid of all the user error in flashing the 1.33.2005 SPL.
xOneSainTx said:
The thing is I've flashed all sorts of rom's before, but I wanted to try the 1 click rooting process. I think what happened is I flashed the SPL before I flashed the updated radio. I was doing some research on the whole thing. I flashed the SPL first.
Click to expand...
Click to collapse
Were you already rooted when you did the 1 click root? - if you were then that might have been were the mess up happened because once you do the one click root you have to flash a rom (probabably cyanogen would be best) to continue or you lose root.
Following that question if you were already rooted and had hard spl and new radio - the one click might have cause you to lose that.
You have to flash from hard spl to danger spl
Radio should be newest or second to newest
Also it is said to flash hero rom right after flashing spl. - Which means not turning off your phone or rebooting after flashing
- I saw a video were they were at the rainbow boot screen and they flashed the Danger Spl and then inserted a new sd card that had hero and flashed it without rebooting.
Read up more on this
is one click still ok ?
I've had my G1 for about a yr now. Watching the mods grow . Never had thought about rooting just because I didn't want to have to keep changing to keep up to date. Then the one click came out and it was time. Ordered my 8gig class6 sd and before I got it Google did this C&D to CY. I see people saying they are doing the 1 click method and the links they put on are before the C&D. Can it still work ? Also everyone who tries to give directions how to get root and roms are different. Even this thread has been changed or something was left out. Is there a true one click method ? I tried theUnlockr way 3 times and I still wound upwith a wiped phone. Please Help Me ...
nPHILLY said:
I've had my G1 for about a yr now. Watching the mods grow . Never had thought about rooting just because I didn't want to have to keep changing to keep up to date. Then the one click came out and it was time. Ordered my 8gig class6 sd and before I got it Google did this C&D to CY. I see people saying they are doing the 1 click method and the links they put on are before the C&D. Can it still work ? Also everyone who tries to give directions how to get root and roms are different. Even this thread has been changed or something was left out. Is there a true one click method ? I tried theUnlockr way 3 times and I still wound upwith a wiped phone. Please Help Me ...
Click to expand...
Click to collapse
one click will not work in donut 1.6. it will be patched, there is a thorough guide in my sig. i also have links i can give you for cm 4.0.4 and 4.1.11.1 if you want them.
1-click root only works with CRC1 and lower. Personally, I prefer to downgrade to RC29 and manually root it. I've done it about 20 times that way and have never once had an issue. In fact, I did it last night and today that way and both phones are rooted with Hero ROMs and running perfectly.
My advice, find a good tutorial (there are plenty, particularly the stickies on XDA on the subject) and download all necessary files ahead of time so that you aren't stuck in the middle of rooting looking for a file. If you want to flash the update "Danger" SPL, there is a combination radio/spl so that bricking is less likely. Search XDA for it. Also, check if you have PVT board first (camera+power). If not, brick it you will (or more than likely will). If I had to guess the main reason for problems and bricks it is that people rush the process and skip steps because they started the process without reading the whole tutorial.
nickryan0612 said:
Were you already rooted when you did the 1 click root? - if you were then that might have been were the mess up happened because once you do the one click root you have to flash a rom (probabably cyanogen would be best) to continue or you lose root.
Following that question if you were already rooted and had hard spl and new radio - the one click might have cause you to lose that.
You have to flash from hard spl to danger spl
Radio should be newest or second to newest
Also it is said to flash hero rom right after flashing spl. - Which means not turning off your phone or rebooting after flashing
- I saw a video were they were at the rainbow boot screen and they flashed the Danger Spl and then inserted a new sd card that had hero and flashed it without rebooting.
Read up more on this
Click to expand...
Click to collapse
I was rooted before I did the one click but I downgraded to RC29 with DREAIMG.nbh file. I did the 1 click process fine. I figured that what fxcked up my phone is that i flashed the custom SPL before I flashed the new radio first. I'm pretty sure thats what messed it up. I wanted to the Amon Ra's Recovery image and I didn't know how install that with out doing the 1 click root process.
ya if you flash spl before raidio that's what messed you up ! always radio first then spl . but you know that now .can you get in recovery at all ?
lucky 69 said:
ya if you flash spl before raidio that's what messed you up ! always radio first then spl . but you know that now .can you get in recovery at all ?
Click to expand...
Click to collapse
No I can't get passed the G1 boot screen. Its ok though T-Mo is sending me a "LIKE NEW" G1. I told them the donut update screwed my phone up. I can't believe I did the SPL first but its a mistake that could have cost me more then a 19.95 delivery fee that IS being waived by T-Mo.
But heres the question with 1 click root do I need to downgrade to RC29 or no?
xOneSainTx said:
No I can't get passed the G1 boot screen. Its ok though T-Mo is sending me a "LIKE NEW" G1. I told them the donut update screwed my phone up. I can't believe I did the SPL first but its a mistake that could have cost me more then a 19.95 delivery fee that IS being waived by T-Mo.
But heres the question with 1 click root do I need to downgrade to RC29 or no?
Click to expand...
Click to collapse
no just be on stock cupcake and use the 1 click root. Then when you did that go into recovery and flash a rom that is not hero or requires danger spl
nickryan0612 said:
no just be on stock cupcake and use the 1 click root. Then when you did that go into recovery and flash a rom that is not hero or requires danger spl
Click to expand...
Click to collapse
Sounds good. Before screwing things up I always had good success in flashing roms trying multiple roms in a day. My favorite is the xRom. I am curious to see if eventually there will be a Cliq rom.
Hello, I recently downgraded my firmware to RC29 in an attempt to install the latest cyanogen 6.
Long story short I am a huge noob it seems and simply cannot get this to work properly.
I just want to upgrade my firmware back to the latest 'official' now. Can anyone help me please because now I am stuck using RC29 phone claims Cyanogen 1.4.
Please help
evilzergling said:
Hello, I recently downgraded my firmware to RC29 in an attempt to install the latest cyanogen 6.
Long story short I am a huge noob it seems and simply cannot get this to work properly.
I just want to upgrade my firmware back to the latest 'official' now. Can anyone help me please because now I am stuck using RC29 phone claims Cyanogen 1.4.
Please help
Click to expand...
Click to collapse
You have cyanogen recovery 1.4 you say?
First:
install 1.33.2003 (very important -- ends in a THREE) SPL. Search the forum for it, should be around.
Second:
install 2.22.19.26 or 2.22.23.02 radio (.19.26 is available at developer.htc.com/adp.html).
Third: install a newer recovery image. Check the dev forum.
Fourth: install any ROM you like. You can install the bone stock ADP1 system image (like tmobile stock, but has root), if you want to try CM6, you should look in the dev forum for firerat's MTD PARTITION HACK THREAD. Hell, it would do you good anyway.
Thanks! Time to do some reading and get this resolved.
=\