Database Develop

[Q] Few ROM and SPL Questions

I've got a few questions, hope no one minds answering. If it's a simple case of RTFM then lock the thread and trash.
1. I've rooted and am using the latest JF build but when I go to telnet I can't connect to localhost anymore. Is this normal?
2. I'm running stock SPL and Radio (not too sure what the radio is btw). Is it best I update before flashing anymore roms?
3. I'm wanting to flash to Cyanogen Mod rom, it looks a lot more complex than simply renaming the rom to update.zip then flashing. Is it safe to assume that there is a lot more work to do? (if so a general point in the right direction would be greatly appreciated).
I really appreciate any help.
Thanks

1. I'm not sure as it has been some time since I last used JF's build I'm afriad...
2. Its advisable at the very least to upgrade your radio (look at my signature for a link). You can upgrade your SPL too providing you have flashed the latest radio FIRST and that you are on a PVT motherboard.
Boot into the SPL to find that out (turn off/reboot the mobile, Hold CAMERA+POWER). It should say at the top.
3. To use Cyanogen's ROM its like flashing any other ROM. Just make sure you have the latest Radio FIRST. Also I believe it works fine for non Apps2SD users so no need to partition your SD card etc to use it.
Hope that helps.

Stock SPL? do you mean HARDSpL?

alritewhadeva said:
Stock SPL? do you mean HARDSpL?
Click to expand...
Click to collapse
Unless it was updated while rooting it's probably "G1 Original SPL"
Thanks NeoBlade, I'll update the radio and spl tomorrow then probably try and get nandroid running so I've got a backup in case anything goes wrong.

No worries digital, just do your usual pre-checks before flashing the SPL and remember Radio first ^_-
You'll enjoy the new features and performance improvements using the latest cooked ROMs out there. Most of the info is in my signature but you can also flash the new Recovery image too by Cyanogen (http://forum.xda-developers.com/showthread.php?t=523558).
Not only can you create a Nandroid backup from there, you can also restore it too all from your mobile ^_^

Not to be an @ssh*le, but if you root your phone don't you already have the HardSPL? If you follow Koush's guide you were told to flash the HardSPL which isn't the stock SPL at all. Care to shed some light on this?

He could have had the engineering SPL, I remember having that briefly myself in the early days. The main thing is that he just wants to run Cyanogen's ROM so as long as he updates the radio and flashes the ROM without issues it should be fine. Unlike some Hero ROMs it doesn't require the latest SPL to create space for the ROM.
Granted though, its often always nice to have the latest stuff ^_-

Ok well if you DECIDE to update to the latest radio and SPL just go to my guide below and go to the second post. That will tell you how to install the radio and spl updates!
Good luck!

Indeed ^_^ And once that's done, perhaps change the title to SOLVED so people know. We shall have to wait for digital to get back to us about it.

This is the guide I used:
http://haykuro.theiphoneproject.org/?page_id=35
Sorry alritewhadeva:
I'm on the HardSPL so I guess I don't need to bother updating that again. I didn't get to the point where it said to update to the newest radio.
Reading a bit further it also says that I can do a backup easily using adb which is already setup. At some point in the process it must have installed the things needed for nandroid backup. I think it was the recovery.img part.
Thanks for the great link Nephron, I used it before to setup adb on my netbook (running win7 on my main machine).
Before I flash the latest radio is it safe to do this *after* updating the spl?
Thanks for all the great help, I really appreciate it.

As a thumb of rule, always flash the radio first before the SPL and the ROM.
Tell us how it goes ^_^ If you've managedto do it, could you please edit the title then to add SOLVED? Good luck.

Soo do you have to flash the radio and SPL everytime you want to flash a rom??? i already have the latest radio, i just want to make sure i dont make a mistake

Tr1n1Jay said:
Soo do you have to flash the radio and SPL everytime you want to flash a rom??? i already have the latest radio, i just want to make sure i dont make a mistake
Click to expand...
Click to collapse
No you don't. Only once... then kind of keep an eye on the forum to see if better radio or SPL comes along. So far I had to update my radio once. What recovery image do you have (home+power), is it still JF1.43? You should update that to CM 1.4, you get a lot more flexibility with that... read up on it in development forum. All in all, unless you plan to install Hero anytime soon (and I personally don't recommend it, too slow and buggy) you should be good with (in that very order)
1. Flashing newest RADIO (Haykuro has it in the link you provided, only need to do it once and you already did it!)
2. Flashing HardSPL (you already did that too! no need to do it again)
2. Updating your Recovery Image (once more, this only needs to be done once)
After that - flash any rom you feel like at any time you feel like doing it.
Hope that helps, good luck!

I agree with everything borodin1 said. If you're on a 1.5 ROM you really should have the new radio already, but you can always go back and flash it. Afterwards you'll want hard SPL or haykuro's. Haykuro's is what you'll need for most HTC based ROMs (Hero, Rogers). Most people brick when flashing Haykuro's ROM because they don't read. Aslong as you have the new radio and a PVT phone (go to the bootloader - home + camera - and it should say PVT) you will be fine.

How to Properly Upgrade ROM

I did a couple searches but could not find a guide to updating my CyanogenMod version. I followed an old ninja tutorial on rooting which linked to v3.4.6. But I don't think I have to do a wipe and all that stuff do I? Do I just have to copy the ROM to SD, rename as update.zip and do the reboot thing? Will I lose my data? Settings? (I know it's a good idea to backup anyway)
Do I have to upgrade incrementally from 3.5-->3.6-->3.7-->etc.. or can I jump to latest version? Do I need to use an updated recovery image, or is cm-recovery-1.2.img okay?
On a side note, I just noticed that there is an update showing up under System Updates. Is that the official Google update? What would happen if I applied that update?
Thanks

just download cm 4.0.1 and flash it. you do not have to wipe unless things start to terribly mess up. i would recommend get the 1.4 recovery image as you can flash any .zip file with it. also you can restore a nandroid backup from it. if something does mess up try running fix_permissions in the recovery console before wiping.
if you applied an official google update you would lose root access but that wouldn't be terribly hard to get back with the one-click root in the market aka recovery flasher.

Thanks david1171.
Does either flashing the ROM or the Recovery Image wipe my settings, apps? Sorry for the noob q's.
Also, someone in a previous thread said to update radio? Is that a separate procedure? Where do I find the latest radio version?

just flashing the rom or radio or recovery image will not wipe anything. the newest radio is 2.22.19.26I. you can check in setting>about phone> under baseband version the part past the U_ is the radio version. if you do not have the latest radio you can get in cyanogen's thread in the first post. and you just flash the radio like a normal rom. the only thing that will wipe your data when you flash it is haykuro's spl.

what do you mean just flash the radio like any normal rom?
do I rename the radio zip file to update.zip, put in root directory, reboot, hold HOME, then ALT+S? Is that what you mean?
I tried to follow the HTC guide for updating radio, but it sounds like you need a developer machine to run those commands.
Thanks

meanderingthemaze said:
what do you mean just flash the radio like any normal rom?
do I rename the radio zip file to update.zip, put in root directory, reboot, hold HOME, then ALT+S? Is that what you mean?
I tried to follow the HTC guide for updating radio, but it sounds like you need a developer machine to run those commands.
Thanks
Click to expand...
Click to collapse
yeah thats how you do it.

Alright, I'm up and running:
recovery 1.4
newest radio
cyanogenmod 4.0.1
Here's a guide for noobs that I found useful:
http://androidandme.com/2009/05/gui...r-rooting-your-android-g1-to-install-cupcake/
It's going to be outdated but at least it shows how to update radio. I didn't realize that all updates were treated the same. Now with Cyanogen's Recovery 1.4, we don't have to rename the files to update.zip.
I also didn't realize that when you do updates it doesn't delete your data folder which houses all of your custom settings, apps, google account info. It just flashes the system files.
I still don't know a lot and don't completely feel comfortable doing everything. Hopefully soon enough, someone will put together a guide to explain all the particulars that are not obvious to the noob. People have already started.
Thanks so much to everyone who has worked on these projects. It's so awesome!

do you have the Hard SPL. if not go to the guide in my sig and you can install it noob friendly from there

Hero Application

hi guys,
i want to install hero rom on google g1 but droiddeveloper lin is loss http://www.droiddeveloper.com/hrbuilds/app_s.zip
any alternative link ? rapid 4share etc ...
thank you

alperk said:
hi guys,
i want to install hero rom on google g1 but droiddeveloper lin is loss http://www.droiddeveloper.com/hrbuilds/app_s.zip
any alternative link ? rapid 4share etc ...
thank you
Click to expand...
Click to collapse
This forum has about 7 different versions as well as links to Rom databases please use the search. And please post your questions in the Q&A section not the Dev section. Also Hero is not an application, it is a phone & build Sense is a UI that runs on these devices.

Look up at the top of the forum where it says "don't start a new post questions and answers here " click on that.....

sory again, but install procedure is below
i dont know and alternative procedure.
hey guys i want to install hero rom on g1 help please
i am new user for google g1 phone. help again please....
(COPIED FROM HAYKURO's OFFICAIL THREAD)
Installation:
1. Download http://www.droiddeveloper.com/hrbuilds/app_s.zip
2. extract "app_s" into your sdcard's ext2 partition.
3. Download http://www.droiddeveloper.com/hrbuilds/hero-signed.zip
4. Place on regular sd card.
5. Reboot into recovery, wipe and flash.
6. Enjoy.

First of all, you need to root your phone, then you need to flash the new RADIO then flash new SPL,then create an ext2/3 partition on your class 6 sd card along with a linux swap partition, then you need to find a newer hero rom and flash that.

alperk said:
sory again, but install procedure is below
i dont know and alternative procedure.
hey guys i want to install hero rom on g1 help please
i am new user for google g1 phone. help again please....
(COPIED FROM HAYKURO's OFFICAIL THREAD)
Installation:
1. Download http://www.droiddeveloper.com/hrbuilds/app_s.zip
2. extract "app_s" into your sdcard's ext2 partition.
3. Download http://www.droiddeveloper.com/hrbuilds/hero-signed.zip
4. Place on regular sd card.
5. Reboot into recovery, wipe and flash.
6. Enjoy.
Click to expand...
Click to collapse
1.do you have a factory g1?
2.wat build is it?
3.have you rooted your phone yet?
4. do you have the lastest SPL and radio?
haykuro hero is OLD!! try a newer version hero_over or anyone

bigslanki said:
1.do you have a factory g1?
2.wat build is it?
3.have you rooted your phone yet?
4. do you have the lastest SPL and radio?
haykuro hero is OLD!! try a newer version hero_over or anyone
Click to expand...
Click to collapse
hi friend,
1- yes i have a factoury g1
2-i dont know.
3- Unfortunately any rooted
4- i try to download lastest spl and radio but i dont know anything... where can i install

http://forum.xda-developers.com/showthread.php?t=563679
http://forum.xda-developers.com/showthread.php?t=543081
You need to get to reading before trying anything with your phone. If you flash something without following directions/knowing what you are doing, I can guarantee you will brick your phone.

alperk said:
hi friend,
1- yes i have a factoury g1
2-i dont know.
3- Unfortunately any rooted
4- i try to download lastest spl and radio but i dont know anything... where can i install
Click to expand...
Click to collapse
just follow the links and read.....it seems hard but follow step for step and you will be fine. the good thing after you have rooted and installed radio/spl you wont have to do it again. and will be able to use any Hero/Dream(ROM).....
its been about 6months or more since i rooted my phone/ it just takes a bunch of reading and trial and error afterwards. goodluck!

bigslanki said:
just follow the links and read.....it seems hard but follow step for step and you will be fine. the good thing after you have rooted and installed radio/spl you wont have to do it again. and will be able to use any Hero/Dream(ROM).....
its been about 6months or more since i rooted my phone/ it just takes a bunch of reading and trial and error afterwards. goodluck!
Click to expand...
Click to collapse
ok dude,
i will try it,
i hope so i can do
regards...

Android Dev 1.6 to original cupcake

Please help!!! I started messing with my phone about a week ago and I install the Android 1.6 dev. It will not flash anything, not even an spl. What am I missing. I almost feel bad asking because all of you seem to have such knowledge of this stuff. Thank you very much

I don't wanna bring your hopes down thinking this was help lol but u prolly tried flashing cyanogens new rom and its funny cause i was JUST about to post this same shiet. but anyways. i was thinking about flashing the dream file but i dunno if that owuld brick my phone or not. and just to clarify its the htc 1.6 dev right? i mean if thats the only 1? lol

yup
That is exactly what happened! I don't understand how this isn't a major issue and posted everywhere. If you figure it out make sure you let me know and I will do the same. Take it slow!

Can you explain what the problem problem is? What have you been trying to flash? Do you get errors? What recovery image are you using?
Btw, if you're flashing an SPL or radio with Cyans recovery, you can't use the trackball. It must be an update.zip which you install by pressing alt-s and reboot using home+power. If you don't it wont be installed.

Well, I don'tk now about the original poster, but I've tried flashing the OTA cupcake rom to downgrade. renamed to update, went into recovery but it says its not authorized. and.. im afraid to put the dream.nbh or w/e cause it might brick the phone.
PS: This is 1.6 without root. this is the dev ver. so we have the exclamation point recovery not cyan.

lapalways05 said:
Well, I don'tk now about the original poster, but I've tried flashing the OTA cupcake rom to downgrade. renamed to update, went into recovery but it says its not authorized. and.. im afraid to put the dream.nbh or w/e cause it might brick the phone.
PS: This is 1.6 without root. this is the dev ver. so we have the exclamation point recovery not cyan.
Click to expand...
Click to collapse
okay first you need a app called flashrec it will dl cyan recovery image then you reboot.But you need root first also teh dreaimg.nbh file which is RC29.

1.5 cupcake rc30 or something and up was patched with the one click root, that's why we were trying to downgrade to 1.5..

nothing works
I can't use the flash rec because it won't back up the recovery image! Everything I try to flash just goes to installation aborted! I don't know what to do!

It's b ecause 1.5 rc30+up (including 1.6) patched up the 1 click, but an answer would be nice

flash the dream image and start from scratch. that takes everything back to stock, then you can re-root. This thread can walk you through it
http://forum.xda-developers.com/showthread.php?t=491350

it doesnt work
I already tryed that but it won't let me flash the spl!

i tried that too
I tried flashin the dreaimg too. I have ran jf1.5 before and flashed themes and everything. That's why I don't understand why I can't flash anything. The 1.6 work but the recovery image isn't letting me flash anything at all! Once I installed the 1.6 dev it flashed me from the 1.4 cyanogen image to the exclamation image with a differnt bootloader. Ever since then I can't flash anything.

i think he means using camera + power unroot it.but im guessing we don't flash the SPL since we can't, we just flash the dream.nbh?

After Factory Reset
Guys,
I did factory reset but now I can not work with HTC dream as it is requesting me to cerate a gmail account, and I can not cerate because I do nto have internet in my mobile operator.
Does anyone knwo how to bypass this mesage?
please help meee.
r,

bhowd u do the factory reset?

I did it!!!
I had to download sdk, get it working, fastboot the the cyanogen 1.4 recovery image. After the it let me install all of my updates. YAAAAYYYY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

could you tell me the steps of what you did?
I'm stuck with ADP1 1.6 ><
Thanks a lot!!

This will work!!!
Trust me this will work because it took me hours to figure out. Install sdk, get it to work. They explain how to use the program on the forum. After you finally get into fastboot flash the cm 1.4 recovery image. After you do that you can bootup into that recovery and it will then read all of your zip files unlike that stupid exclamation recovery.

slightly confused
So you mean you used http://forum.xda-developers.com/showthread.php?t=502010 to figure out how to use the sdk right?
If not, can show me the link to that guide?
Many thanks!!!

yes
Yes, I used the sticky notes at the top of Dream Q&A to figure it out and it wasn't too fun.

Need help flashing roms to G1

I have been trying to flash the CM7 Rom to my G1 and continue to get the same error messages... I tried uploading a pic but the app wouldn't let me, so I will try and get the pic posted asap
Sent from my LG-P999 using XDA App

what is your radio/spl?
also have you flashed many other roms before?

Please using following combination for Radio and SPL. Also note, flash radio first and then SPL otherwise G1 will not boot. Also make sure you have Clockworkmod recovery for CM7. This recovery helps for smooth flashing for CM7.
update_2.22.28.25_S - Radio
hboot0013d-signed - SPL

kudlinux said:
Please using following combination for Radio and SPL. Also note, flash radio first and then SPL otherwise G1 will not boot. Also make sure you have Clockworkmod recovery for CM7. This recovery helps for smooth flashing for CM7.
update_2.22.28.25_S - Radio
hboot0013d-signed - SPL
Click to expand...
Click to collapse
OK, this might be sorta a strange question, but this looks to be the best place to ask it.
Will the Dream be bootable if you flash only the Radio and SPL, leaving untouched the stock Android 1.6?
While I am a Linux geek, I am new to android and prefer to take things one step at a time. That explains why I have a Rooted dream with Amon RA with the stock 1.6 backed up with nandroid.

TheLexx said:
OK, this might be sorta a strange question, but this looks to be the best place to ask it.
Will the Dream be bootable if you flash only the Radio and SPL, leaving untouched the stock Android 1.6?
While I am a Linux geek, I am new to android and prefer to take things one step at a time. That explains why I have a Rooted dream with Amon RA with the stock 1.6 backed up with nandroid.
Click to expand...
Click to collapse
never tried, theoretically it should be as if you did a factory reset and you would just use your recovery to replace anything lost. but if you want to be safe maybe someone who has will chime in.
besides the point go ahead and flash a new rom, even if you stick with 1.6 firmware the developers have come out with much superior roms over the stock android. if you want only 1.6 try super d or super csdi
ok so i decided to test this out, updating a g1 to the 2708+ radio/spl and not flashing a new rom -------- stuck on g1 boot screen, hit call+menu+power then hit home to reboot to recovery, reflashed rom and gapps, rebooted, now everything is good as can be, so to answer your question --- yes it appears you need to flash a rom after you update your radio/spl