Hero Application - G1 Q&A, Help & Troubleshooting

hi guys,
i want to install hero rom on google g1 but droiddeveloper lin is loss http://www.droiddeveloper.com/hrbuilds/app_s.zip
any alternative link ? rapid 4share etc ...
thank you

alperk said:
hi guys,
i want to install hero rom on google g1 but droiddeveloper lin is loss http://www.droiddeveloper.com/hrbuilds/app_s.zip
any alternative link ? rapid 4share etc ...
thank you
Click to expand...
Click to collapse
This forum has about 7 different versions as well as links to Rom databases please use the search. And please post your questions in the Q&A section not the Dev section. Also Hero is not an application, it is a phone & build Sense is a UI that runs on these devices.

Look up at the top of the forum where it says "don't start a new post questions and answers here " click on that.....

sory again, but install procedure is below
i dont know and alternative procedure.
hey guys i want to install hero rom on g1 help please
i am new user for google g1 phone. help again please....
(COPIED FROM HAYKURO's OFFICAIL THREAD)
Installation:
1. Download http://www.droiddeveloper.com/hrbuilds/app_s.zip
2. extract "app_s" into your sdcard's ext2 partition.
3. Download http://www.droiddeveloper.com/hrbuilds/hero-signed.zip
4. Place on regular sd card.
5. Reboot into recovery, wipe and flash.
6. Enjoy.

First of all, you need to root your phone, then you need to flash the new RADIO then flash new SPL,then create an ext2/3 partition on your class 6 sd card along with a linux swap partition, then you need to find a newer hero rom and flash that.

alperk said:
sory again, but install procedure is below
i dont know and alternative procedure.
hey guys i want to install hero rom on g1 help please
i am new user for google g1 phone. help again please....
(COPIED FROM HAYKURO's OFFICAIL THREAD)
Installation:
1. Download http://www.droiddeveloper.com/hrbuilds/app_s.zip
2. extract "app_s" into your sdcard's ext2 partition.
3. Download http://www.droiddeveloper.com/hrbuilds/hero-signed.zip
4. Place on regular sd card.
5. Reboot into recovery, wipe and flash.
6. Enjoy.
Click to expand...
Click to collapse
1.do you have a factory g1?
2.wat build is it?
3.have you rooted your phone yet?
4. do you have the lastest SPL and radio?
haykuro hero is OLD!! try a newer version hero_over or anyone

bigslanki said:
1.do you have a factory g1?
2.wat build is it?
3.have you rooted your phone yet?
4. do you have the lastest SPL and radio?
haykuro hero is OLD!! try a newer version hero_over or anyone
Click to expand...
Click to collapse
hi friend,
1- yes i have a factoury g1
2-i dont know.
3- Unfortunately any rooted
4- i try to download lastest spl and radio but i dont know anything... where can i install

http://forum.xda-developers.com/showthread.php?t=563679
http://forum.xda-developers.com/showthread.php?t=543081
You need to get to reading before trying anything with your phone. If you flash something without following directions/knowing what you are doing, I can guarantee you will brick your phone.

alperk said:
hi friend,
1- yes i have a factoury g1
2-i dont know.
3- Unfortunately any rooted
4- i try to download lastest spl and radio but i dont know anything... where can i install
Click to expand...
Click to collapse
just follow the links and read.....it seems hard but follow step for step and you will be fine. the good thing after you have rooted and installed radio/spl you wont have to do it again. and will be able to use any Hero/Dream(ROM).....
its been about 6months or more since i rooted my phone/ it just takes a bunch of reading and trial and error afterwards. goodluck!

bigslanki said:
just follow the links and read.....it seems hard but follow step for step and you will be fine. the good thing after you have rooted and installed radio/spl you wont have to do it again. and will be able to use any Hero/Dream(ROM).....
its been about 6months or more since i rooted my phone/ it just takes a bunch of reading and trial and error afterwards. goodluck!
Click to expand...
Click to collapse
ok dude,
i will try it,
i hope so i can do
regards...

Related

Tried updating to Haykuro's new radio. Not sure if it did, help!

Hey guys,
I just tried updating my G1 to the latest radio on Haykuro's site. But I am not sure if the radio has actually been updated. I am quizical about this because my baseband version reads:
62.50S.20.17U_2.22.19.26I
Click to expand...
Click to collapse
I thought it should read:
62.50S.20.17H_2.22.19.26I
Click to expand...
Click to collapse
I want to update the SPL next so that I can install Haykuro's Ion Rev.2 ROM, but I don't want to do this until I have solved this problem.
The process I took to update the Radio was:
Install 'Recovery Flasher' (the one-click-root app) and ran it.
Put the Radio on my microSD named update.zip
Rebooted G1 in recovery mode.
Applied update.zip
There was one doubt in my mind about the process I did. That was the part where I could have wiped the phone before updating the Radio. Is this what I should have done? If I had would the Baseband version be correct? If I do is there anyway to get all my apps back after flashing the Ion ROM?
Please would somebody help me out! Thanks.
You have the new radio. And as far as your apps go you just gotta reinstall them. You can install them 1 by 1 or by batch install or with ADB. Just find a technique you like cause if you gonna start playing with new roms you will be doing this more than once.
Oh right, cool. Thanks for that.
So what do the H and U mean exactly then?
To be honest I really can't remember. That topic was talked about a long time ago and I don't have that good of a memory. Maybe someone could chime in and explain.
You don't need Haykuro's SPL for Ion r2, It's a google build, so it will work with any SPL including the original one...
Mine is 62.50S.20.17U_2.22.19.26I. I got it from HTC's site (Android 1.5 Radio Image). I was running Ion r2 for a couple of months, had no problems with that radio.
Cool. Thanks for all the help guys.
Can anyone point me in the direction of a good way to backup all my apps ready for a batch install once I have flashed to Ion REV.2?
m1ke.t said:
Cool. Thanks for all the help guys.
Can anyone point me in the direction of a good way to backup all my apps ready for a batch install once I have flashed to Ion REV.2?
Click to expand...
Click to collapse
Search for Backup for root users in the market or go to the link below and scan the QR code if you have barcode scanner.......
http://www.cyrket.com/package/com.bg.smsbk
There are many other ways to backup your apps, but this is by far the easiest for beginners.
If you want other ways, you can PM me and I can walk you through some other steps.
Thanks DM,
Starting a new thread about this new problem - http://forum.xda-developers.com/showthread.php?p=4361029#post4361029

1-ckick rooting for Google G1 / G2

Hey all!
i have some questions to this app:
http://www.cyrket.com/package/org.zenthought.flashrec
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
1. does it works on T-Mobile D G1 with any FW? or also only with RC29 or RC7?
2. is flashing "HardSPL" or "DangerSPL" a musthave or can i use the original SPL (iam scarry to flah SPL)?
3. when i restore the backup do i have the full original t-mobile D delivery version of my G1?
4. how i restore the original recovery.img
5. if needed, how do i restore the original SPL
6. do i need to flash the Radio manual or do the apk make this
7. is this the right order?
- download apk
- install apk
- download CyanogenMod v4.0.1
- save as update.zip on SD root
- execute apk
- create backup
- flash Cyanogen recovery 1.4
- reboot into the new
- flash CyanogenMod v4.0.1
- Wipe
- boot G1
- download new Radio
- copy Radio as Radio.zip to SD root
- update Radio via Cyanogen recovery 1.4
- done
- boot G1 (now i have a rooted G1 with CyanogenMod v4.0.1)
please correct me if the is anything wrong or if i missed any step!!
iam "noob" with android - but i hope not for a long time
As a N00b you should at least read the Sticky posts, like http://forum.xda-developers.com/showthread.php?t=528334 this one...
It's called:
"Don't Start A New Thread - Dream Questions & Answers Here!"
All questions should be posted in the Q&A Section. I'm not too familiar with the 1-click rooting since it's been out for less than 72hrs so from what I've heard the 1-click root flashes cyan's recovery for you so all you have to do is this:
-Download and flash newest radio
-Download and flash Hard SPL
-Wipe
-Download and flash CM v4.0.1
If you do it in this order I'm 99.99999% sure you won't brick your phone, but once again please post all future question in the Q&A section
dubbeld00 said:
As a N00b you should at least read the Sticky posts, like http://forum.xda-developers.com/showthread.php?t=528334 this one...
It's called:
"Don't Start A New Thread - Dream Questions & Answers Here!"
Click to expand...
Click to collapse
if to correct me, iam not a totaly noob - iam only noob in flashing android i allready flashed two HTC Wizard to a german Windows 6.5 Beta 2 and they works perfectly only a bit slower as with mobile 5.0
bluedragon1982 said:
Hey all!
i have some questions to this app:
http://www.cyrket.com/package/org.zenthought.flashrec
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
1. does it works on T-Mobile D G1 with any FW? or also only with RC29 or RC7?
2. is flashing "HardSPL" or "DangerSPL" a musthave or can i use the original SPL (iam scarry to flah SPL)?
3. when i restore the backup do i have the full original t-mobile D delivery version of my G1?
4. how i restore the original recovery.img
5. if needed, how do i restore the original SPL
6. do i need to flash the Radio manual or do the apk make this
7. is this the right order?
- download apk
- install apk
- download CyanogenMod v4.0.1
- save as update.zip on SD root
- execute apk
- create backup
- flash Cyanogen recovery 1.4
- reboot into the new
- flash CyanogenMod v4.0.1
- Wipe
- boot G1
- download new Radio
- copy Radio as Radio.zip to SD root
- update Radio via Cyanogen recovery 1.4
- done
- boot G1 (now i have a rooted G1 with CyanogenMod v4.0.1)
please correct me if the is anything wrong or if i missed any step!!
iam "noob" with android - but i hope not for a long time
Click to expand...
Click to collapse
Yes, this app worked perfectly for me ( cuz I dun wanna waste my time doing all the porcess of pulling the firmware back to RC29 ). If u have the latest radio, then just execute the .apk, turn off your phone right after doing all the required process from that app ( back up current img then Flash the 1.4 img from Cyanogen I remember ), then go into recovery mode and you have the newest recovery img. (Remember to put the CyanogenModv4.0.1 to your SD first). Then Wipe and Flash the update, and you're done
and it works without flashing SPL????
bluedragon1982 said:
and it works without flashing SPL????
Click to expand...
Click to collapse
ARE you NOT getting IT ..........
YOU need TO ask YOUR questions IN the Q&A section....
THIS is THE development SECTION
dan0zone said:
ARE you NOT getting IT ..........
YOU need TO ask YOUR questions IN the Q&A section....
THIS is THE development SECTION
Click to expand...
Click to collapse
thx for moving
now the next ry to get good anwsers and not so stupid answers like the one form dan0zone
hard spl will not brick your phone. it is needed to flash roms from other regions than yours. hard spl is a good thing to have. also with it you can flash nandroid back ups and you can change your splash screen to further personalize your dream. enough said... go download it. flash it. if you have to wipe, then wipe. if you don't like wiping then you should not have rooted in the first place.
but to use this tool have id need to flash the SPL or works it with the original SPL too? in the manual and one the youtube video- there is no info about a need to flash the SPL.
all i want to know is:
can i just install this app, flash the new radio, run the backup, flash recovery, flash CFW, and iam done or not
yes you can do that. afterwards i would recommend flashing the hard spl.
you do not have to flash it, but it would be a good thing.
david1171 said:
yes you can do that. afterwards i would recommend flashing the hard spl.
you do not have to flash it, but it would be a good thing.
Click to expand...
Click to collapse
thanks, should i flash the radio befor i try to root my G1 with the 1-click rooting? or after i flashed the custom FW?
I used the "1-click root"
I followed all the steps and my phone is working fine, but how can you tell if its rooted?
Also, if it is rooted and I wanted to install the most current cyanogen ROM, do I have to install the new radio and SPL files?
Thanks in adv for putting up with my N00Bness.
what build do you have now? rc33? i would first update the radio. i would not mess with the newer spl as it has been known to brick phones. also did you install cynogen's recovery image? turn phone off then hold power button and home key when you turn it on to put you back into recovery image. it should say cynogen recovery 1.4 on top. it will have a number of options on the bottom nandroid backup, restore nandroid etc. if that cynogen"s recovery image is on the phone its rooted. after you flash the latest radio, i would flash jf 1.51 build then cynogens latest build. i heard the going to cynogens latest build will cause a bootloop if your not coming from another modded build.
kaws666 said:
I followed all the steps and my phone is working fine, but how can you tell if its rooted?
Also, if it is rooted and I wanted to install the most current cyanogen ROM, do I have to install the new radio and SPL files?
Thanks in adv for putting up with my N00Bness.
Click to expand...
Click to collapse
To tell if the phone is rooted, download terminal emulator from the market and type su at the prompt. If the phone is rooted, the prompt should go from a $ to a #. If not, you will get a permission denied error message. If that is the case, probably go the old fashion way of rooting
http://forum.xda-developers.com/showthread.php?t=548924
As far as the SPL and radio, you don't need the danger SPL (haykuro's) but you will need to engineering SPL or hard SPL to install custom ROMs. As far as the radio, you want to latest radio to improve calls, bluetooth, etc.
hi im also new..
i did the 1 click root too. i did the back up, then flashed the 1.4. then the nandroid backup, then wiped the data, then flashed cyanogens 4.0.1. so im pretty sure im rooted.. and everything works too! except myfaves and the native im app.
but whats this about the radio? do i have to update that? i havent messed with the radio at all.. what are the dangers in this? if any?
and i haave no clue what the hell spl is lol
roadrunnerx7 said:
hi im also new..
i did the 1 click root too. i did the back up, then flashed the 1.4. then the nandroid backup, then wiped the data, then flashed cyanogens 4.0.1. so im pretty sure im rooted.. and everything works too! except myfaves and the native im app.
but whats this about the radio? do i have to update that? i havent messed with the radio at all.. what are the dangers in this? if any?
and i haave no clue what the hell spl is lol
Click to expand...
Click to collapse
SPL info:
http://forum.xda-developers.com/showthread.php?t=455860
Radio info:
image file for controlling wireless/radio signal, runs at layer underneath android
Source: http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_overview_and_useful_information
Please guys, try to use the search function...pretty please.
definetly flash the radio, it made my speaker a lot louder!
My current build never changed. Its still CRC1 :/
I just tried the terminal emulator command and typed su and it said permission denied :/
What SPL and radio should I flash after I root of course?
DirectMatrix said:
SPL info:
http://forum.xda-developers.com/showthread.php?t=455860
Radio info:
image file for controlling wireless/radio signal, runs at layer underneath android
Source: http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_overview_and_useful_information
Please guys, try to use the search function...pretty please.
Click to expand...
Click to collapse
thank you!

Help with Cyanogen and modding

Ok, i have a need for a bit of help. I rooted and flashed to Jesusfreaks adp. I tried to get it to RC33. LONG story short, JF is installed. My kernel is 2.6.27-00392-g8312baf
NO clue what that means but im at fireware 1.5 and Build number CRB43
I want to get to Cyanogen. It looks a little smoother then JF and more frequently update. BTWi have a G1
I followed this guide TO THE T!
simplehelp.net/2009/10/04/how-to-install-cyanogenmod-4-1-99-on-your-g1-android-phone/
and after i rebooted, it took forever to boot (which is usual)
All my apps crashed. My desktop didnt even load. It had force closes like *android.phone and *android.mail
I figured it was because i was trying to mod off of the Jesus freak setup. Can anyone help me out and tell me how to either COMPLETELY wipe my phone and restore it to its origional G1 official build and then i can re-root to Cyanogen OR a way to mod from Jesusfreak to Cyanogen
copy and paste this into your browser... follow the directions...
wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod[/url]
Just read that guide over and thats all exactly what i already did. I have tried to signed-dream flash and then after taht the cyan mod. It installed the OS no problem. It just didnt have any programs working. IT is as if the phone had the OS but no program files. It wouldnt even load the phone at all. it was a black screen with a status bar and infinate force close screens. Any idea what that is a result of? I had to flash recover back to my JF os
Try this:
1. Flash recovery Amon_Ra (Great improvment on JF and Cyans recovery)
Code:
Copy recovery-RA-dream-v1.5.2.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
select console from the menu
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-dream-v1.5.2.img
2. Boot into recovery (Home+Power)
3. Wipe Data/Factory Reset
4. Wipe EXT
5. Repair EXT
6. Flash Super D (I suggest Super D only because there is less flashing involved and it's a great improvement on the Cyan roms.. super quick too)
From here you should be set.
so if i already have root and all that, do i still need to follow step 1? Like flash with Amon_Ra? or can i just wipe, and reload the D rom? also your rom says its myHero2.2? is that a good rom? Im just trying to find the best rom to use on a g1. I have read up on Jesusfreak, its very stable, but it is pretty much just a open version of the regular tmobile os. THe only difference is the apps store is an older version. In your opinion, what is the best G1 rom and what are its percs?
thanks for all your help. This has been a working progress haha, finding a good rom and sticking with it. and can you give me a list of all the files needed for the best rom? if they have a step by step guide to it, thatd be great! i would look myself, but im still new at all this and there are like a bajillion different roms/ ways to load the rom. Im a PSP hacker, not an experienced phone guru
Tigger166 said:
so if i already have root and all that, do i still need to follow step 1? Like flash with Amon_Ra?
Click to expand...
Click to collapse
I would just so you're current on your recovery. The updated recovery has added features compared to JF's recovery
Tigger166 said:
or can i just wipe, and reload the D rom? also your rom says its myHero2.2? is that a good rom?
Click to expand...
Click to collapse
I would load the new recovery and then flash Super D. Again it's the most stable and is wicked fast. Yeah used to use myHero2.2 but i haven't updated my sig in a while. It's getting mundane at this point.
Tigger166 said:
Im just trying to find the best rom to use on a g1. I have read up on Jesusfreak, its very stable, but it is pretty much just a open version of the regular tmobile os. THe only difference is the apps store is an older version. In your opinion, what is the best G1 rom and what are its percs?
Click to expand...
Click to collapse
This is going to be more of a difficult question to answer. It just depends on what you're after. I really prefer Super D because of it's speed. Again its built from the Cyan roms so you get Cyan + extras. That's what I would go with. Simple, easy, and fast.
thanks for all your help. This has been a working progress haha, finding a good rom and sticking with it. and can you give me a list of all the files needed for the best rom? if they have a step by step guide to it, thatd be great! i would look myself, but im still new at all this and there are like a bajillion different roms/ ways to load the rom. Im a PSP hacker, not an experienced phone guru
Click to expand...
Click to collapse
Well that's the cool part about the community here at XDA. All the files are set up for you. To flash a rom:
Code:
Download the .zip file and place it on the root of your sd card
Reboot into recovery
Make a backup (i prefer switchrom)
Wipe Data/Factory Reset
Wipe EXT
Repair EXT
Flash rom from .zip
Reboot.
It's that easy.

Rom Help Please

Hi everyone
i am rooting my g1 now
And i want to install a custom rom
i am noob
there is too much thread in " G1 Android Development"
which one is good ?
thanks for helps
necrescope said:
Hi everyone
i am rooting my g1 now
And i want to install a custom rom
i am noob
there is too much thread in " G1 Android Development"
which one is good ?
thanks for helps
Click to expand...
Click to collapse
HAI
I was noob too like you.
I know good ROM.
Try SuperBad. Latest of course.
I've always been a fan of CyanogenMod
i have tried others ROM's but i keep going back to CM
CM5.0.7-DS
read the instructions
download the files
read the instructions AGAIN
then flash
i made a mistake the 1st time i flashed it because i did not reboot after the SPL update...... phone just sat there at the G1 screen for 20 minutes before i rebooted it.... sometimes they take a while to boot the 1st time after flashing but not 20 min
went form CM4.2 to CM5.0.7-DS...... Love it
thanks for helps
HTCclay's 1.5.1 Superbad Is ferocious if you want to go all out
Clom801 said:
HTCclay's 1.5.1 Superbad Is ferocious if you want to go all out
Click to expand...
Click to collapse
Hi, my G1 is currently running MLIGN Hero 3.0, I believe I have DangerSPL installed, not sure about the radio (Does it matter what Radio I have for that ROM?)
Im not sure if my SD is partitioned though??
Please could you give me a bit of a guide here , its been along time since I flashed my G1,
I think the process is, Wipe Data, Dalvik cache, wipe ext partition, then format SD, then Partition SD? Then toggle USB and place 1.5.1 Superbad onto the SD, then flash it and hope all goes well??
Thanks!! I appreciate it!! (Sorry to hijack your thread OP)
Super E, absolutely

[Q] Please help the begginer in android (for update from 1.6)

Hello! Please help me!
I bought HTC Dream G1 on ebay with
installed Android 1.6 (DONUT) on it.
I heard that now there are android versions 2.x and i need to have so versions to install most of apps.
Please, write my some instructions what should i do to update my device, or give me some links.
I have seen a lots of modifications of Roms in your forum but i don't understand nothing about this. /please recommend me/
Also I should add : I live in eastern europe (bulgaria) /because i heard that there re some US roms or.../??
P.S. Sorry for my stupid questinos, but i'm migrating from 186mhz windows 6.0. smartphone)) and i'm new to android...
its a lot of work I just did it now :/
Have a friend do it.
I did this, I stopped at this step "Now you have root!"
http://forum.xda-developers.com/showthread.php?t=442480
then I did this
http://theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted/
using this:
http://dev-host.org/uxpmh3p0c2z6/recovery-RA-dream-v1.7.0-cyan.img
then I followed some of this for the radio/spl
http://androidandme.com/2009/08/news/how-to-root-a-t-mobile-g1-and-mytouch-3g-android-phone/
***probably best to follow this one instead***
http://forum.xda-developers.com/showthread.php?t=983834
and finally I installed this:
http://forum.xda-developers.com/showthread.php?t=929678
it's a lot to absorb at once and theres a lot of room for error... I'm still having issues as we speak
you found all the guides except for mine lol... which is basically all of that on one place...
http://forum.xda-developers.com/showthread.php?t=1098899
Hey i was reading up about rooting for 2 weeks before i plunged in and took the step. Let's say on your first try, don't do anything that needs you to change radio etc.
Just use the superoneclick method to root it, then download rom manager (free from android market) and install clockworkmod recovery. This should be easy, as from rom manager all you need to do is click flash clockworkmod recovery, and it will do it for you.
Next find the rom you want, and download 3 files. One is the rom itself, the other is a kernel (example ezterry's) and finally gapps and put them on your sd card. Next reboot into recovery.
First you'll want to create a backup, go to backup and restore click backup, and let it do it's thing. Once it says backup complete, you'll need to wipe cache, and wipe date/factory reset.
Once you've done that, do install zip from sd card, and install the files in this order:
ROM first: (find where you put the zip file on your sd, and select it)
Then do install zip from sd card again & select the Kernel (if you need to flash a seperate kernel)
Then finally do install zip from sd card again and select the gapps, zip (this is basically the android market, and a few other google apps).
Next press reboot into recovery, and it should load into your new rom, if all has been done correctly. I just recently rooted and put a custom rom on my phone, and this is the way i did it, so it should work for you. Make sure you research rooting and flashing roms onto your phone, before you take the plunge though.

Categories

Resources