Hi,
I want to dump my WM5 rom (I think its from O2). But I'm not sure about that because I've got a G4-type device.
If I install WM6.5 on my wizard, can I just undo it by flashing with mine dumped ROM?
I want to know before I upgrade to WM6.5.
cu Floh
I think I found the answer myself.
As far as I understand is dumping ROM not necessary since I found O2-WM5-ROM here (I downloaded this and keep it for case if I need to downgrade my device).
cu Floh
Related
Hello everybody,
I use my MDA III in German, which is fine. However I would like to make a ROM backup from the ROM that is in my MDA. Since T-Mobile doesn't offer for downloading the ROM in the device, I'd like to read it out.
If I would change the ROM to WWE and later would need to be able to put the original German back (because of warranty or anything) for that I need to have the German ROM.
Any ideas for how to read this original German ROM out or where to download it from?
Thanks in advance, bye!
U can update it in future by last German ROM.
try
http://forum.xda-developers.com/viewtopic.php?p=81245#81245
think that will cover you
Well... that wasn't really what was asking for. I now updated my MDA, but I wanted to do a backup of the old ROM before update. However, nobody could answer this question, so now I don't have a backup of the nbf files. Well, actually I don't even care about it any more
tomiki said:
Well... that wasn't really what was asking for. I now updated my MDA, but I wanted to do a backup of the old ROM before update. However, nobody could answer this question, so now I don't have a backup of the nbf files. Well, actually I don't even care about it any more
Click to expand...
Click to collapse
The only way I've found is described here
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151&PN=1
I've used it done an upgrade then reverted back to the rom on the SD Card. You can also then move the backup onto your PC and back to the SD Card using the software described in the above ftp://xda:[email protected]/BlueAngel/MDAIII/ntrw.exe
Good Luck
Thanks!
I want to keep all the O2 stuffs intact, is it possible to update only the CE and Radio ROM but not the extended ROM? I know the procedures I think, and I just need to delete ms_.nbf before running BaUpgradeUt? Will my O2 extended ROM stays intact this way?
How much better is 1.06.2 Radio ROM better than 1.02? Is it worth the update?
And after the update, I should just restore DATA but not full restore right?? Also, do I have to disable ActiveSyn before the update? If so, how?
Sorry about so many questions
Think ur ext rom will be blank this way
CL55
My answer to your question would be
Unhide the extened rom as is
unlock extenedrom as is now
make a copy of it as in on your desktop
do the normal upgrade
unlock/unhide the new extended rom
delete the content
copy from the destop your old extenedrom
lock/hide the exteneded rom again
do a cold reset.
this will boot the device, reinstall the os and radio and install the old extenedrom.
Do I think that that is a good idea, NO!! but that is what you want to do.
You need to undersatnd that some of the stuff on extened rom is for the new upgrade such as the patches.
So ... not that you asked ... I think what you want to do is swap only some of the files. but do you know which ones?
Read the bit on unllocking the Imate extenede rom
Read the bit about changing boot imaages.
Think about what you realy wont to do and have fun.
pleun, says:
Think ur ext rom will be blank this way
Click to expand...
Click to collapse
but it's not true. I've done that and your Extended ROM is not deleted
so:
1. You chose the ROM you want to use it (and you use xda3nbftool.exe if the ROM comes from another operator than yours)
2. Before launching the ROM installer "BaUpgradeUt.exe", you remove the Extended ROM package which is call "ms_.nbf"
and you update your ROM normally
Only the CE ROM and Radio will be upgraded. Your Blue Angel will keep your old Extended ROM.
And remember: If the ROM you have chosen comes in a package like BA_WWE_BelDT_12200_557_10602_SHIP.exe, you can open the ifile with WinRAR to extract its contents.
Simple solutions for a simple world!
ArtZ
True, only Qestion I have is why did I not Know that before?
Yup its simple and it works.
Now a real qestion for you based on you own knowleage.
Is there any way to add a Romkitchen Exteneded rom to the upgrade?
We seem to have know tools for this er2003edit does not work for me on the blueangle.
I have not been able to find any way of extracting splash screens but am able to replacing then (which is great but I dont have the original splashes)
Things are not only you know, your ways are not always the best.
I have searched a lot of places, please help. Where I can get the latest T-mobile ROM and Radio for Diamond? Thanks a lot.
I think you will struggle. I looked for quite some time before flashing my MDA with Swiftblades ROM (in case I needed to send it back for repair). In the end I gave up and just went for it!
here you go
http://forum.xda-developers.com/showthread.php?t=406327
indie said:
here you go
http://forum.xda-developers.com/showthread.php?t=406327
Click to expand...
Click to collapse
The thing with this link is you have no idea what SPL you need to use do you? I havent flashed mine yet from t-mobile stock but Im aware you need to use HardSPL to flash a cooked ROM right? In which case what does this .exe do and what HardSPL does it need.
Like the poster - I like the security of being able to role back....not so keen on a one way ticket even if everyone seems to tell me its the way to go to bring the diamond to life..
Yes, I am looking for the latest ROM and Radio for MDA Compact IV, I don't know if the ROM upstaires of UK is the right one for T-Mobile MDA Compact IV.Please help. If the theme color is pink? Thanks a lot.
do not flash to the rom in the link provided as this is a very old version of the ROM which is extremely slow, instead wait for someone to dump the new ROM (or just keep the old one as a failsafe for warranty like i have) and go to a cooked rom instead ^^
Addicteddddd said:
do not flash to the rom in the link provided as this is a very old version of the ROM which is extremely slow, instead wait for someone to dump the new ROM (or just keep the old one as a failsafe for warranty like i have) and go to a cooked rom instead ^^
Click to expand...
Click to collapse
That link has all the same versions as what T-Mobile are currently shipping...it might be very old...but its what Ive got at the moment...just dont know how to use that .exe and what SPL etc.....
Does anyone know how to dump the rom currently in your phone out to something that you can reprogram it with later if needed?
[Q] MDA compact IV (German T-Mobile)
i have the same Problem.
The German T-Mobile-Version has changed/invertet HW-Buttons!
The original
So, if i find a ROM and Patch my MDA4, will it work? Or do i need a very special version beacuse of the invertet HW-Buttons (Keys?)?
Where may i fond a "how to" to find the way to find the right ROM i can use?
tnx
I have just got a replacement from t mobile yesterday. It is the same version in this page. No new version has been released yet. I use hardspl 1.24 from jocky and then use duttys v2 rom. Works ok. When I had to return mine i used the above link and then used SPL 1.37 which it ships with. You can find stock spls by doing a search.
indie said:
I have just got a replacement from t mobile yesterday. It is the same version in this page. No new version has been released yet. I use hardspl 1.24 from jocky and then use duttys v2 rom. Works ok. When I had to return mine i used the above link and then used SPL 1.37 which it ships with. You can find stock spls by doing a search.
Click to expand...
Click to collapse
Why did you get a replacement - was it to try and get one with a newer ROM? Ive got a week left in which to return mine if I want to - which I dont. I really like the phone but its a bit slow and klunky with 1.37.x.x
Nice to know youhave managed to use that .exe though...so you whacked SPL 1.37 on it which you found somewhere on here and then executed the .exe and bosh....back to old ROM/Radio?
neilsupermac999 said:
Why did you get a replacement - was it to try and get one with a newer ROM? Ive got a week left in which to return mine if I want to - which I dont. I really like the phone but its a bit slow and klunky with 1.37.x.x
Nice to know youhave managed to use that .exe though...so you whacked SPL 1.37 on it which you found somewhere on here and then executed the .exe and bosh....back to old ROM/Radio?
Click to expand...
Click to collapse
yea. Thats about right. First you have to flash the stock rom and radio in the link. Then last of all get the stock spl and flash it. Then it will be like the stock t-mobile you will get from the shop
the phone was faulty. thats why it was replaced. It came with the same old rom though.
anyone know now what to do with a t-mobile MDA IV ?
I am still not able to decide if i will buy a t-mobile (can get it for 300 euro, no contract) or buy a original.
I've given in and bought one, and, hopefully it will be here by Thursday, it works out at £285 over 12 months but only 150/150 mins/txts (I've only gone over that twice in the last 2 years)
I've had my mdac3 for 18 months and it has been returned/replaced 5 times, every time it has had a 'non tmobile' rom on it and they haven't batted an eyelid, so why is everyone suddenly worried about flashing back to an original rom? Surely if your phone knacks up badly enough that it has to be returned then you would struggle to put the old rom back anyway?
Hey, I got a MDA compact IV branded from tmobile, but its starting to get on my nerves, and I want the original theme, so I figured I've got to put a new ROM on, now what rom is the best for a Dutch tmobile MDA compact Iv?
thanks in advance
i use A.Z.T.O.R. X2 (V11)Ultimate NLD based on latest Official ROM
you can find it here :http://forum.xda-developers.com/showthread.php?t=422417
there aren't many dutch roms, but this is probably the best one.
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
VerusAmos said:
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
Click to expand...
Click to collapse
I also got a MDA Compact IV...since 2 weeks I run the aztor v11 rom, and man what a difference. Much faster.
Just try..
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Ok, I've tried two times to do the update as I just ran the [exe] file on my PC, but I get the [262] update error.
When it updating the bar sticks on 0%, as well on my phone. Luckily after detaching the battery for 3 seconds, my phone just soft resets. What now???
I've done some research but with all the different versions and languages I got really confused. I need another spl to install the [nbh] in order to update the X2 update. But I cant find a way to run the [nbh] file.
I'm also afraid that I'll ruin my MDA. So I searched for a original spl and ROM, but I can't seem to find the right one. I also unable to determine which spl I have on my MDA. It should be a dutch T-Mobile ROM (& spl???). The warranty period isn't over yet so I might need it. (But I hope not of course).
This flashing thing is really confusing...
Same problem
I have exactly the same problem trying to change the ROM from uk vodaphone to Duttys V4. The strange thing for me is that I have 2 Diamonds (his and hers) and the first one went through the process like a dream.
I'd be very grateful to find a fix
VerusAmos said:
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Click to expand...
Click to collapse
First I ran Olinex hard-spl 1.40, after that I rename the .nbh file tot DIAMIMG.NBH, copy that file to your internal storage and than flash from the internal storage. Read this
If above is still abacadabra send me a pm, then I will translate this in dutch.
best rom questions?
to find out whats best for you is to start flashing.
this question is not welcome here on this forum.
as it always end in a flame war.
thread closed.
I bought the Qtek 9100 and i would like to upgrade it. I read a few tutorials, but i still dont understand everything, this will be my first phone ROM upgrade. Please excuse me if these questions are totaly noob.
Help much appreciated.
1. I dont know if i need to CID unlock my phone, but if i do which is better, more commonly used (or safer) : SoftSPL or HardSPL?
2. I would like to upgrade to IPhone killer - Windows Mobile 6.5.1 - Build 23075, but i dont know if this ROM is supported by the qtek 9100 G4. Will it run good or not?
3. Is it possible to make a backup of the currently installed ROM, if in any unfortunate scenario i ruin my phone and then restore it to what it was before?
4. I am running windows 7 and i saw some posts saying that it cant be used for flashing and that you need virtual xp. What do i need to do in virtualxp to make it work then?
I would tell you to search or use the wiki, but I'll assume you already have, lol.
1. Yes, you need to CID-unlock the phone before flashing anything. My first and only flash was using SoftSPL, and had no problems.
2. Check the ROM topic, does it say "G4 safe" or "OS only"? Don't try do flash ROMs that aren't cooked for your device. A WM6.5 can run a little slow, dunno.
3. Yes, there is a way, but if you brick your phone, all you'll have is a paper weight and a backed-up ROM, lol. Check here: backing up ROM
4. Can you install XP itself? That would be better I guess.
Cheers