Related
Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.
Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*
Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.
Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg
Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.
Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963
Morning all
I have been offered a swap for my iPhone for a brand new boxed Orange TyTn II and Im just wondering if its worth doing?
I have had previous windows mobile phones and do like the phones so I am considering the trade, I am currently on o2.
The thing is i have read all the posts about unlocking and flashing roms etc and im a little on edge about doing it myself as im sure i will break it lol
I would basically need to sim unlock the phone and remove all the orange software as I think it looks naff!
How much work is envolved in doing what i need and how long would it take?
Sorry if im repeating a post, im not the best at forums and get lost with all this info you guys have!
Cheers
Sy
Absolutely YES!!!
There is no contest. The TyTN II wins hands down!!!
Leave well enough alone. Perhaps get a sim unlocker. Just do a search and you should find something. But don't play around with flashing roms etc. You may regret it.
Use the HTC original apps which you will find on a sticky at the beginning of this forum.
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
I'm wondering if i should get a TyTn 2 now or wait for a Xperia.
Checked out the TyTn at a store a couple of days ago and i loved it, the only thing i didnt like was that it doesnt have a radio. Then i read around in this forum and came across the driver problems and the touchscreen bug and due to them i'm more inclined to wait for Xperia, but then i checked out Xperia's design and i didnt like the way the keyboard slides to, makes you operate the joystick with the right hand instead of the left and that's kind of uncomfortable.
seriously, who uses radio? I stream my Sirius satalite radio..
Sirius Pwnz AM/FM
..........
Audio said:
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
Click to expand...
Click to collapse
dont you need to CID unlock it first? what is this hardspl and what does it do?
jonneymendoza said:
dont you need to CID unlock it first? what is this hardspl and what does it do?
Click to expand...
Click to collapse
Yes you MUST CID unlock as well (unless it has already been done, which is doubtful if it is on Orange).
My advice...Before even getting the TYTN II, read the sticky's and Wikis in the upgrading ROM section at least 3 times over to ensure you have an idea of what you are going to need to do before even doing anything. when you think you understand it, read them again.
Then go ahead and flash any ROM you fancy and enjoy the benfits of the TYTN II voer the Iphone.
HardSPL is the replacement bootloader that allows you to install an non original ROM.
Im on T mobile and i hav heard that the ROM is not heavily branded. im just worried about bricking it. i already have the MDA viara 3.
reading this thread http://forum.xda-developers.com/showthread.php?t=334679 doing hardspl, does that automaticly unlock the CID or is there another tool to do that? if so do CID unlock it first and then hardspl?
You will NEED to CID unlock AND HardSPL...Do not consider doing anything untill you are 100% certain of the steps you are performing and why, otherwise you will have a rather expensive paperweight.
EVERYTHING you need to know and more about Rom flashing is contained here
http://forum.xda-developers.com/showthread.php?t=369282
Seriously, ensure you read every link and sub link related to ROM flashing. Even make sure you read the "inspirational reading" bit, that will give you the confidence to try it.
As long as you read you will be fine.
When I was new here I spent 4 days solid reading reading and reading before biting the bullet and flashing my first ROM. At
Thanks for the advice. one small question. if i was to follow this guide : http://forum.xda-developers.com/showpost.php?p=1790046&postcount=3 word for word i should be succesful?
there is one question i am still confused about and thats this hardspl/cid unlock. according to the Thread i linked, all i got to do is follow the guide from HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) and bam im ready to Flash the ROM?
also what are the major benefits of flashing to a custom ROM?
does the procedure from that last link above hardspl AND CID at the same time?
hi i managed to hardspl my device succesfuly. so im ready to install a new cooked ROM? what are the best ROMS out there that i can try. i have seen dutty's ROM that many have used and was wondering if thats the best one
Does the DUTTY rom improve the camera and video playback?
I apologize in advance if my questions are trivial and I am just dense.
I am pretty sure I've read through all the threads for "n00bs" but I still can't get a grasp of what exactly hardSPL does or is. I ran the search function and found that I don't NEED it per say and has claimed that it actually is "safer" to use USPL.
I own a Tmobile Wing (IPL > 4.xxx)
1. What exactly is the difference between USPL and hardSPL?
2. What are the limitations of either one.. will flashing a cooked rom without hardSPL cause problems?
3. I currently have flashed the newest Open Touch 4.0 and haven't had any problems at all (USPL), but I noticed in the thread for Touch-IT, it says that hardSPL is required. What does that mean exactly? If I flashed it w/o hardSPL.. will my wing crash/brick?
4. At some point, I'd like to sell the phone, so I don't want to do anything that is irreversible. My understanding was USPL is reversible, hardSPL is not?
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Essentially what you are doing is changing the Bootloader so you can install a different ROM regardless if it's signed.
USPL and HardSPL is a matter of having it done temporarely or permenantly.
USPL (temporary), is the safe route. This will allow you to Install one USPL capable ROMs per USPL. So if you're not a big flasher, and thinking about selling your phone in the near future, then you might want to stick to this method.
HardSPL (permenant), is the only TRUE way of bricking your phone. You will flash the bootloader for good so that you can constantly flash new ROMs without having to worry about flashing your bootloader of making sure it's a signed ROM. For heavy flashers, like myself, this is the ideal route.
HardSPL is reversible, there are some threads on how to do that. If I remember correctly, you have to flash back to a Stock T-Mo ROM.
Some ROMs require HardSPL because sometimes the cooks use different methods to flash ROMs onto devices other than ActiveSync (which is needed for flashing via USPL).
For example, ttran001's Open Touch V4.0 Micro ROM flashes onto your device using your SDCard, the phone is never connected to you PC so no opertunity to USPL. If it was not HardSPL'd, the ROM would be rejected. If it was, the flash would continue flawlessly.
I hope this answers your questions, and please, if I got anything wrong, correct me.
Regards,
three4seven said:
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Click to expand...
Click to collapse
Oh and from what I understand, installing those cabs wont hurt your device if you dont HardSPL. I believe you can uninstall them from the "remove program" which can be found under Settings/System/Remove Programs.
Everyone's allowed a Noob question every now and then I only know all this info because I read, so im sure if you read u'll be just fine.
nKiwan, thanks for quick and throrough reply
I get a little lost with this:
nKiwan said:
This will allow you to Install one USPL capable ROMs per USPL.
Click to expand...
Click to collapse
what does that mean exactly?
perhaps I should start by asking the USPL acronym stands for - I've googled it and I couldn't find the right acronym.
From my understanding.. the only real difference (besides one uspl rom per uspl vs infinite - i'm still a little hazy on that) is that hardSPL allows for flashing outside of activesync?
thanks again... I swear I tried my best using the search function and reading
Well, correct me if i'm wrong, if you do not HardSPL, then you must USPL your device everytime you wish to flash your device. This will temporarely change your bootloader so it will allow you to flash a non signed ROM, a.k.a. an "outside" ROM. USPL capable ROMs, are ROMs that you can flash using USPL, therefore, ActiveSync.
Well there are two differences I guess... HardSPL, basically, allows for flashing outside of ActiveSync; and will allow you to flash any ROM as many times as you would like, once HardSPL'd.
As far as the acronym goes, I have NO clue lol. Never bothered to find out, I guess it would be helpful to know .
nKiwan said:
Well, correct me if i'm wrong, if you do not HardSPL, then you must USPL your device everytime you wish to flash your device.
hardSPL.... will allow you to flash any ROM as many times as you would like, once HardSPL'd.
Click to expand...
Click to collapse
Technically then.. I could also flash any rom as many times as I want using USPL as long as I run USPL.exe? I read the flashing guide several times. The only difference I found was that you run USPL.exe and it goes through a loader instead of just running the RUU flaser. Is that right?
i apologize once again if I am being incredibly dense.
thanks again for putting up with my n00bness
there ya go! you got it. As you become more experienced you'll start to understand the need of HardSPL.
I was once a noob myself, so i understand where u coming from . Just glad I can help.
Regards,
nkiwan - thank you so much for answering my barrage of n00b questions.
You have been a great help. I really appreciate it.
Wow I think this is the coolest thread I have read ...it is just awesome what the WWW has done for all of us and thanks for the info
Glad I can help
I can understnad the use of USPL but I would recommend the use of hard SPL if you are planning to flash multiple roms. Either way I think it is just a matter of whether or not you actually want to run the USPL everytime you want to flash a rom... Don't quote me on that.
Just to doublecheck myself....
If I use USPL method and hard reset my phone - will I have the stock rom or the flashed one?
if I understand correctly USPL will bring back the stock one after hard reset and HSPL the new one.
very sorry to ask this now..from what i get is there are 3 ways of turning ur phone from phone to super phone:
1. install .cabs
2.soft flashing
3.hard flashing???
am i rite??
nKiwan said:
As far as the acronym goes, I have NO clue lol. Never bothered to find out, I guess it would be helpful to know .
Click to expand...
Click to collapse
I found this thread that you might find useful for the acronyms:xdasite.com/showthread.php?t=1104
Same was with me.....
three4seven said:
I apologize in advance if my questions are trivial and I am just dense.
I am pretty sure I've read through all the threads for "n00bs" but I still can't get a grasp of what exactly hardSPL does or is. I ran the search function and found that I don't NEED it per say and has claimed that it actually is "safer" to use USPL.
I own a Tmobile Wing (IPL > 4.xxx)
1. What exactly is the difference between USPL and hardSPL?
2. What are the limitations of either one.. will flashing a cooked rom without hardSPL cause problems?
3. I currently have flashed the newest Open Touch 4.0 and haven't had any problems at all (USPL), but I noticed in the thread for Touch-IT, it says that hardSPL is required. What does that mean exactly? If I flashed it w/o hardSPL.. will my wing crash/brick?
4. At some point, I'd like to sell the phone, so I don't want to do anything that is irreversible. My understanding was USPL is reversible, hardSPL is not?
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Click to expand...
Click to collapse
Hi Brother,
Same problem with me i have also search every where but failed... no answer about Hard spl.Every body say do hard spl and search in fourm and so on. There was no proper guide what it is and how to do. i was really puzzel. Now i have come to know that axect what it is Hard Spl.
Hard Spl mean CID unlock. If you unlock CId of the phone its mean you have done Hard SPl. Without CID unlock you can not write ROM.
Thanks
Br Raja
I have a T-Mobile Wing. I hardSPL'd it, installed a custom ROM, then I used the RUU to flash the original ROM back to it. It doesn't show the CanonYang startup screen, but the SPL version is still 4.70.Yang. Is it still HardSPL'd?
Stargazer418 said:
I have a T-Mobile Wing. I hardSPL'd it, installed a custom ROM, then I used the RUU to flash the original ROM back to it. It doesn't show the CanonYang startup screen, but the SPL version is still 4.70.Yang. Is it still HardSPL'd?
Click to expand...
Click to collapse
You can always check in the bootloader screen (the RGB screen).
Even if you have a 4.70.Yang you still need the IPL to be higher than 4 to flash custom ROMs. That is what is important.
If you ever see any of these number's change, Run the HardSPL folder again.
Hi there, im fairly new to my Telus Diamond, i love this phone but its giving me some grief with the Touchflo3d being laggy etc...
Anyways I heard you can flash new ROMS that are custom and more stable and help out the phones performance a lot but i have a few questions before I flash.
Here's my phones specs before i ask my questions.
ROM Version: 1.06.661.1 (old i believe)
ROM Date: 07/21/08
Radio Version: 0.99.90v
Hardware Version 0080
and i dont think the rest is important.
And im usuing WM 6.1
ok now here are my questions:
1) If I flash to a cooked ROM, i heard it Erases EVERYTHING, so with that in mind, im a telus customer, does it effect my service plan, ex: can i still use my phone like i bought it and make txt msgs, emails, msn, phone calls etc.. or do i have to set it back up again?
2) Do i have to use the same Radio Version?
3) would my Current network number and Cureent Channel be changed? If so how does that effect my phone?
4) umm with my programs that are on my phone, ex: office mobile, WMP, MP3 trimmer remote desktop etc... will i still have those? Or will i loose the registration for them.
5) this is my last question i believe, would I have to dump my current stock ROM for a backup? Like is that recommended or is there a backup of my ROM already on this website.
I appreciate any help, and sorry for being such a noob. The only thing i've flashed before was a custom firmware on my PSP lol and that was reallly easy...
1)Yes it erases everything the easiest way to explain it is like this: "rom" stands for read only memory.... kind of like a cd rom. And the outcome is the same also, when you flash a new rom it is like writing a new cd image.
2) no you don't have to use the same radio version, but some roms will require certai n radios (most roms come packed with radios though so you shouldn't have to mess with it)
3) Flashing a new rom changes your phone but not your network (your number would still be the same)
4)You will lose anything you installed unless you back it up. Depending in the rom, office mobile and stuff like that might be preloaded.
5) There should be a backup on the website, a dump should not be necessary.
Again on the backup thing you will want to back up are your contacts sms emails ect anything you want to keep before flashing.
Flashing isn't hard, you just need to read the directions MAKE SURE YOU READ BEFORE YOU FLASH. like i said it isn't hard but if you don't read everything before you flash you may turn your phone into a very expensive paper weight.
PS here is a good place to start your reading:
http://forum.xda-developers.com/showthread.php?t=416211
Alright sweet thank you very much
Im not going to upgrade just yet though because i still want to learn more
about it and im iffy about it mainly cuz i still want to be able to make phone calls lol and i dont see anyone posting anything for the telus versions.
Oh and one more thing before I upgrade the ROM do i have to upgrade the HardSPL first? or can i just use the CID lock, then the ROM?
no, you defenetly would want to cid unlock first, otherwise you will trash your bootloader and brick your phone
ok so Cid unlock, HardSPL, then flash the rom
hard spl is cid unlock after unlocking you are free to flash away
Oh ok, gotcha haha
.. i hope
One more thing lol sorry...
Um that link you sent me for the steps
"[TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!"
Well i dont know what CDMA means but Im pretty sure im a CMDA user. So is it safe to still fallow those directions? or must i need to do something different.
read post #4 in that thread, you can't miss it.
is it alright if my Diamond says DIAM500? on all the guides they say DIAM100, when you check the SPL, mine is stock and in the tri colored screen it says:
Security Unlocked
DIAM500 <------ (Do i have to find a ROM specific for this modle?)
SPL-0.57.0000 <------ (I dont see this ver. on the forums anywheres)
MircoP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20
Serial
(its blank)
I didnt run any CID unlockers or anything, any insight?
Dang Telus...
hello: iam trying to unlock my phone so i can update the sotware to windows mobile 6 can anybody help me with this ?
Ok. Several things: 1) If you have the default T-mobile ROM on your Wing, you already have Windows Mobile 6.1. 2) If you post the same question in multiple subforums, you are very likely to be ignored. 3) If you only wish to CID unlock the phone, then all you have to do is flash any other ROM found on this forum. Be sure to search in there for "How to Flash" before opening another thread asking for help. Thanks!
what do u mean default T-mobile Rom?
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
fluoroseal said:
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
Click to expand...
Click to collapse
Alright. If you bought this phone directly from T-mobile US, then you do already have Windows Mobile 6.1. Also, to check for sure which version you have, you can go to Start->Settings->System->About. It will display what version of Windows Mobile you have.
I suggest you start with the wiki. Since you keep asking to 'unlock' your phone to be able to flash a new ROM i'm going to guess that you don't know what your doing. Make sure to read up on what is required to flash a new ROM. If you need any more assistance please make sure to ask the correct question in the correct forum and I'm sure everyone will be willing to help. http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
@elazullizard, unless something has changed, the Wing DOES NOT come stock with 6.1, it comes with 6. Now like I say, that may have changed, but I just bought a brand new in the box Wing manufactured in November 2008, and it booted into stock plain jane T-mobile 6. So yeah, this guy does indeed need to CID unlock and upgrade to 6.1 or 6.5.
thank you. and its hera 110 rom ver. 4.26.531 wwe and i do have windows 6 professional but i would like to cid my phone so it can take a new rom? and you help in this mater?
Yes, first of all soft-reset your device using the little hole on the left hand side of it, as soon as you press the little button in the hole, press and hold down the camera button until the 3 color bootloader screen is displayed...confirm that your IPL/SPL is above 4 and reply back to me with the exact number and we can get you started from there.
hello there ther a little problem I use the divce on and everday as my life line for work and i do not have a spare. and this forum takes forever for someone to get back to u ,
so if we can talk head up on yahoo or let me know when u are gona be on this site so we can do this together thank u paul
its rom ver 4.26.531/wwe
radio ver 03.21.90 and runing windows mobile 6 professional.......
Well my yahoo IM is listed in my profile information, and I still need to know your IPL/SPL in order to help you.
Dear friends,
I use T-Mobile Wing. 2007 manufacture.
Can u help me to upgrade it. It uses Windows Mobile v6.0. I wanted to change it to Window Mobile v6.1 or v6.5.
I use it with another sim card. Not T-Mobile. But it is working properly.
How can I do this?
IPL 4.10.0002
SPL 4.10.0000
Thanks a lot...
P.S. Can I use GPS from my mobile. I couldn't found it.
There are plenty of posts that teach you how to flash custom ROMs. If you don't know where to start try searching for "how to hard SPL." You can flash custom ROMs without having your phone hard spl'ed by using USPL. If you decide not to use hard spl there is a great change that you will brick your phone and will no longer be able to use it again. After all you have to do is search for a flashcenter or use mine http://mywing.info/dl/Flascenter.rar . As for you GPS question, there are plenty of gps programs out there. You just need to buy either an external bluetooth gps receiver or a USB gps receiver. pair it with your phone and your done.