i can load a hero rom on my g1 and flash it, but the phone says the sd card has been removed after the rom loads. also card reader says the sd card is write protected and when i go to settings it gives me greyed out area in the mount and available space areas. tried alot of things on the forum but none have worked so far. any ideas or is the card dead.
Boot to recovery, go to console (you have cyan1.4?) and issue this command:
Code:
parted /dev/block/mmcblk0 print
Post what it says.
Your card reader, what kind is it and what OS are you using. You aren't using an SD adapter with a write protect switch on it are you?
you may need to reformat your sd card and repartition it. dont use your card reader just mount if from the phone. you DO have a mini usb right? if not... you may have to reformat it on you phone. but all of your apps will be gone. if you dont have one, go out and buy one. they shouldnt cost more than...5 bucks.
1 512b 3420mb 3420mb primary fat32
2 3420mb 3932mb 512mb primary ext3
3 3932mb 3964 32.0mb primary linux-swap (v1)
4 3965mb 3973mb 8225kb primary linux-swap(v1)
whoa why do you have 2 linux swaps? you only need one....
thanks for all the help, what do i do now.some detailed instructions would be very good.
follow this tutorial on how to partition your sd card. your gonna have to reformat it to fat32 before. scroll down to the part where it says time to partition your sd card.
http://forums.t-mobile.com/tmbl/boa...roidDev&message.id=7674&query.id=130222#M7674
also when loading a hero rom it needs a clear ext2/3 to boot properly.
disk is write protected thats what i get when i put it in a card reader and try reformatting
Related
Okay so I'm pretty sure my SD card got fried (or damaged) last night.
The notification of "Damaged SD card" kept on showing up.
I tried running the repair file systems from CM recovery 1.4, all variations of rebooting, powering down, removing the SD card and all that to help 'fix' my problem.
I also went into settings to see if i have the option to mount and format the SD, but shows unavailable. Also SD secondary is unavailable as well.
So for sure my SD card is fried..... i think lol.
The thing that I am confused about is that I have apps2sd and try to use the apps that I know are installed on my SD card, I'm still able to access and use them, even though my SD card is damaged. I tried rebooting without the SD card inserted and I get FC's galore.
So does that mean my FAT32 partition is damaged and not my EXT partition?
How do I go about to remedy this?
Do I go ahead and click the on the notification to format my SD card?
Then it'll format my FAT32 partition and not my EXT partition?
Or is that totally wrong?
Confused and in need of some guidance. Thanks.
mrcrs said:
So does that mean my FAT32 partition is damaged and not my EXT partition?
.
Click to expand...
Click to collapse
Spot on
Format your card. If you use Linux, you can back up your apps, but you'll have to format and then re-install the EXT2 partition.
Basically, the FAT32 partition got corrupted. Anytime you actually see anything about the SD card on the phone itself, it's always the FAT32 partition.
hey there i had that same problem all i did was resize my fat32 partition
i used GNU parted so go to console and type
Code:
parted /dev/block/mmcblk0
now type
Code:
print
this displays the sd cards size in MB write down the max memory
now type
Code:
resize
it will ask what partition number type 1 it will the ask for a start size just type 0 if it errors saying couldnt write 0 but can write 8192B just say yes and for the end size type 1MB less than your max
Example for my 8gig card
Code:
resize
1
8192B
7965 - change to 7964
this will bring up a error saying the filesystem is damaged do you want to fix say yes
then type
Code:
quit
then
Code:
upgrade_fs
and that should do it
forgot to add your going to have to delete your ext partition FIRST! for that type
Code:
rm 2
First of all, I normally don't post new threads. I've been using this site for a long time, and have always found the answers I need by simply searching and reading. I have searched, and read a lot, but have not found answers that I believe will help my specific problem. So here goes, thank you.
I am running CyanogenMod-4.0.4. I had A2SD set up on a 16GB micro SD card, using the sdparted utility. Everything worked perfectly for about 2 weeks, then my phone suddenly froze up. Pulled the battery, but it would not boot past the "T-Mobile G1" screen. I removed the SD card and everything was fine. I tried to repartition the card using both Mac Disk Utility and Gparted, then tried to set up a new partition table, but I got a corrupted filesystem error each time. That's old news, I've wiped my phone and found a new card, so now I need to know if I can safely set up A2SD.
The card is a 16GB Sandisk micro SD card - class 2.
I've done some reading suggesting that I do not need a linux-swap partition. Can I do this with just a Fat32 and ext3/4 partitions? Or because the card is class 2, do I need the swap?
Thanks again.
Swap is for the OS, not applications on the sd card. The only reason I use swap is for Hero, I have yet to go back to a donut filled cupcake rom with it on.
A2SD is pretty safe for the card, it's swap that you take the risk of shortening the lifespan of the card.
I assume you have cyan's recovery image, you should try to partition the card with parted instead of a computer utility. I really don't think a2sd is the reason for the card failure.
Your old card should still be under warranty.
I've done some reading suggesting that I do not need a linux-swap partition. Can I do this with just a Fat32 and ext3/4 partitions? Or because the card is class 2, do I need the swap?
Click to expand...
Click to collapse
Swap is not related to apps2sd, they are completely separate entities. "because the card is class 2" swap probably isn't a good idea, since it will likely be slow.
Apps2sd isn't particularly taxing to the SD card, particularly with ext2, writes are most damaging to a flash device.
Awesome. Thanks for the quick reply guys. I think I'll go ahead and use the sdparted utility to set up a partition for my apps, but leave off the swap.
Thanks again.
Hi
I have some big problems when I use an EXT2, EXT3 ore EXT4 partition on my SD card.
I want to use APPS2SD to save memory space, but as soon as I make an EXT partition on my SD card, my phone always hangs all the time in the startup.
I get the Android logo, and that the screen goes black with background light, and hangs like that fore 30min with no change.
But if I eject my SD card and start up without it, it's no problem, but now all my programs are in the SD card so they are missing.
What I've done:
I had CyanogenMod-4.2.05.
Made an EXT3 partiotion on my SD card.
Made an linux-swap 31mb partiotion
Updatet to CyanogenMod-4.2.11.1 and than it started up, added my progs to the SD.
Had 1 reboot with no problem, tried to update some programs, than it hang up on the update, woudnt update.
So I had an reboot, that when it started up I got a lot of error messages on the updates.
Tried an new update, and now it wont start up with the SD inserted.
I tried ext partition on my erlier CyanogenMod but same problem than also...
What could my problem be?
Have an 8gb class 4 micro SD card
when I now trie to install programs I get an error message "Insuffcient storage availble"
Clearly this is a problem with your sdcard. Try complete re-format first, followed by complete wipe and re-flash. If that doesn't help then you need a new sdcard.
Good luck.
In what order are your partitions? It sounds like you no longer have the FAT32 as mmcblk0p1? Make sure the first partition is the FAT32, the second is EXT, and the third your swap.
Hi
Could be my card, it's an ebay card so, but works fine with music...
I use an guide fore formating my card, and I make the fat32 first, than ext and so the swap.
Now I tried to make an partition with ubuntu, and without the swap, but dosent seem to help, black screen after the adroid logo....
I guess I give up and its my card...
When i use the Print comand in parted i get the fat32 up first...
Print
number start end size type file system fla
gs
1 0 7500 7500mb primary fat32 lba
2 7500 8000 500mb primary ext2
3 8000 8032 32mb primary linux-swap(v1)
Use AmonRa's recovery? It will paritition the card for you the right way with whatever size partitions you specify.
Ok so my partition could be the problem?
ill try the AmonRa's recovery than, and if not I guess its not ment to be apps2sd on my phone...
Well, I wouldn't say that apps2sd is not ment for your phone since so many of us are using this hack (including myself) however this may be a tedious process of eliminating possible causes. I would not rule out the possibility of damaged SD card. It has happened before to many people. Re-format and re-partition your existing card first. Wipe everything off your phone, re-flash the rom of your choice (following the instructions) and see if it works. If it doesn't work - then I would look into getting a different SD card. I just received a tweet that compUSA has class 6 8GbB card with adapter for $30. I also saw something in "Dream accessories" forum in the "Promotions" thread, I believe 8GB card for $15 from Amazon. Cards are a lot cheaper then new phone, you should try that out. Good luck.
Ok.
I've now installed the AmonRa's recovery 1.5.2
Partition the card with AmonRa's recovery
Wiped data/factory
Shud I wipe dalvik-cache, battry status, and rotate settings also?
Wipe dalvik-cache, others should not matter for what you're trying to accomplish.
Ok thx.
I'll try that, if it doesnt work now, I'll buy an new sd card
So AmonRa's recovery didnt help, so I guess it's my sd card than.
Will buy an new one and test with that.
So fore now on it's low on space
Maby this time I will remember to take an backup when I have y phone the way I like, getting tierd of setting up my phone all the time
I lost my sd card data flashing a rom. Could not mount it even thru recovery. Got a card reader, but it won't format it.
Using Mini Partition Tool to troubleshoot. I am not at a point where it shows three partitions. The main 16gb unallocated, logical. The ext3 unformatted 500mb, primary (think I did that by mistake when trying to recover partition). And a 32mb unallocated, logical. All zero used memory.
I need to get back to one partition allocated, primary. Then I can get sd data back on it and reformat thru recovery.
Again using Mini Partition Wizard
Any help please!
OK,
I got it repartitioned as primary and formatted, bu sd card from pc now.
Hope phone recognizes it.
Will update, if I need further help.
Ken
If you want a good program to format your sd card, try SD Formatter.
Download and install that, plug in your sdcard into your sd card reader and format it.
Choose Full Erase On (if possible) and Resize On. It will format your sdcard to factory default and that means even the ext partition will be gone too.
Well, all transferred. Still won't mount. Says can't mount either of the dev/blocks mmcb1k0p1 and mmcb1k0.
Staus bar says sd card damaged.
?????
musashiken,
Thanks, typing while you posted. Based on my last post should I still do that?
Ken
Yeah I think you should try to reformat again with the program I suggested, as that will full format your sd card.
Once done, put your sd card back to the phone and create ext partition in recovery.
At work now but will be working on it.
Thanks
Ken
musashiken,
Thanks, appreciate all your help
That program worked, and I am back up and running
Ken
Glad it worked for you. My sd card kept giving me problems and I have to use this every few rom flashes.
I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork, I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig
If sdformatter did not work it may be bad.
I always had good luck with it.
Did you have all options set per instructions?
So I got myself a class 10 MicroSD from newegg from the company called Patriot (reviews for all their products say its a good company)
NewEgg page with item
In any case I figured 99$ isnt too bad. So I got the memory card today and sure enough computer has no issues reading it.Speeds are great and no bad reads or writes
So Im trying to set it up with ext3 etc and nothing seems to be working. So in any case I reformatted everything to fat32 on my PC and the phone isn't even detecting the memory card.
I was under the impression 32GB microsd should be ok. I hope this isnt a compatibility issue. Anyone else have thoughts in this?
Tried partition magic, default disk management application on xp also tried MiniTool Partition Wizard and no luck. At this point I just want the phone to detect the memory card to I can format it from the phone and then do the ext3 either from CW or Amon
Anyone? Is changing the drive letter on a computer going to change anything?
I heard that FAT32 does not support 32GB partition very well.. also some card readers have problem with reading a 32GB shdc card.
Try to make a 10GB Fat32 partition on your SD card and leave remaining space free, see if your phone can use it.
houzuoguo said:
I heard that FAT32 does not support 32GB partition very well.. also some card readers have problem with reading a 32GB shdc card.
Try to make a 10GB Fat32 partition on your SD card and leave remaining space free, see if your phone can use it.
Click to expand...
Click to collapse
Thanks ill give it a try but no point in a 32gig card if cant use most of it on the phone. Dont need most of the card as ext3 lol
Working fine here. I used Acronis True Image to clone the card the first go around, but didn't like how it setup the card. Then used Acronis Disk Director to reconfigure a 31gb FAT & 1gb ext3. You can use Amon_RA Recovery to setup the card too. I did do that too, but I already have Disk Director to give me the gui view of what's going on.
Cannot get EXT3 partition to work on Desire
I'm also having issues getting the ext3 partition of the Kingston 32GB micro sdhc card to work with my desire.
I used GParted to create a large fat32 partition and also created a 1GB ext3 partition, but when i reboot the handset i get an error meesage on the desire telling me that the sd card is damaged and that i need to format. When i go back into GParted the FAT32 partition looks healthy but ext3 partition comes up as unallocated.
This method has worked fine with an 2 and 8GB micro sd but it seems to have issues when using the 32GB.
I've also tried using rom manager to create a 512MB ext3 partition but that just causes the phone to sit on on the boot up screen.
If anyone is experiencing the same/similar problem, please let me know how you tackled it.
Try to use Amon_RA's recovery and reformat your SD card with it.
Gparted seems to be the best tool to use.
Hi,
Same problem with a Patriot MicroSD 32GB Class10.
Attempt to partition MicroSD with :
-Gparted
-Minitool Partition Wizard Home
-CWM (HD2)
Partitions are always destroyed or strange modified so Android can't read FAT32 partition.
No problems with a Sandisk 32GB Class 2.
Ok i worked out what this issue was.
Unfortunantly i've purchased a counterfeit Kingston MicroSD.
Kingston confirmed that it was a fake after i send them pics so that explains everything.
Thanks for the feedback guys.
The reviews seem mixed on the Patriot
I like sdformatter--thorough job--make sure settings are as recommended