Database Develop

what am i doing wrong

ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong

when did you buy your wing???
and are you using flashcenter ?? so it can temporary cid unlock the device?

i got my wing in feb or march 08. yes i do have flash center, and i have used it w/o problems before. i have flashed from touch it to open touch and one of aserg's roms too. i have been using OT 4 lite black for weeks now. i have been watching the threads about the new OT 5. so i downloaded it and nothing new is flashing.
does this help any?

digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,

ttran i'm honored!
ttran001 said:
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
Click to expand...
Click to collapse
iwas hoping not to bother any of the main guys with this little problem, but i'm glas your here (love your OT's btw ). ok, i am using the standard activesync method.
heres what i do:
1. download new rom and put it inside my RUU folder on my computer's C drive.
2. run the herald-uspl.exe.
3. follow the prompts
thats all i do and it used to work. i don't know if this helps, but it's the only other thing i have been doing diff. on another thread i asked if it was ok to delete old roms out of my RUU folder. i actually removed my OT v4 lite black and then put the OT v5 UL and ran the uspl. do you think thats what it is? maybe you have to have your old version in the RUU before you flash to a new version?
hope this helps

No. You don't have to have anything but your newest ROM in the RUU folder. When flashing, the phone doesn't know or care what you currently have flashed, unless that ROM is causing problems with your active sync. If that's the case, place your phone into bootloader mode, install the stock ROM (unless you have a HardSPL phone, and it sounds like you don't since you're using USPL.) Then boot up the ROM and run the USPL.

ok, so now know what to do, but why did this happen? whats wrong with the herald-uspl?
i just checked my device info and it says im running open touch v3! i thought that i was using v4. i have hard-spl downloaded, but i dont know if i need to use it or not. should it? then try to flash?

Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.

shep211 said:
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
Click to expand...
Click to collapse
OK, i'll give it a try

Link to unlock phone software and howto
http://forum.xda-developers.com/showthread.php?t=358225

digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.

dougstoner said:
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
Click to expand...
Click to collapse
actually, here is exactly whats in the RUU.
i hope it helps

Ina Weetald
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again

digitalknoll said:
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
Click to expand...
Click to collapse
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.

it looks really sweet!!!!
dougstoner said:
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
Click to expand...
Click to collapse
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix

digitalknoll said:
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
Click to expand...
Click to collapse
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.

dougstoner said:
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
Click to expand...
Click to collapse
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).

digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
The HardSPL makes it so that if you flash a bad flash, you don't have to flash into the Stock RUU again just to get a working activesync connection to be able to flash again.

Courtesy of Ivanmmj
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.

digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
Hey, I was scared for a LONG time to do it...I read so much info before I finally decided to do it! It took me like 2 weeks of reading before I decided. It's an EXTREMELY simple process. Plus, it makes flashing easier. I was getting weird errors trying the USPL method sometimes. Anyway, just do this.
FIRST, make sure your IPL number is atleast 4.000 or higher. You can check this by holding the camera button down, and then doing a soft reset. HOld the camera button down till you enter the bootloader menu. (It's like 3 gradient colors).
If it's higher, great, you are ready to proceed.
Next, download this file.
http://rapidshare.de/files/38148213/...l_WM6.rar.html
Unzip it, and it will contain 3 .cab files you need to install in a certain order.
1. Install canonyang.cab
2. Next, aserpolicy.cab
3. disablesecurity.cab.
Do a soft reset.
Put phone in flight mode!!!!
Now, go to the folder you just unzipped that file from. I think the default folder will be called hard-splwm6 or something like that. Go and run the RUU.exe file in it. Just follow the instructions. The screen of your phone will go white, but just wait, wait, and it will reboot itself.
Presto, you are hard spl, and can load whatever rom you wish!

Please help ASAP

Hello everyone,
I have a rooted g1 and I was putting on the 2.1 rom on my phone. I was following a guys instruction off of youtube but it totally messed my phone up. Now its stuck on the pitcure with the open box pointing a yellow arrow on the phone right next to it(the update screen), what do I do??? Thanks for your help.

You dont even have root then...If it shows what i think your taking about....You should follow this simple enough my little brother(7yr) could master it:
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/

no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related

Sagz326 said:
no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related
Click to expand...
Click to collapse
If you had root why did you flash the radio again?
That gives bricks applying radio after having root is pointless.
What are you trying to do?

i dont know im a noob if you dont know by know. well is there anything i can do???

Sagz326 said:
i dont know im a noob if you dont know by know. well is there anything i can do???
Click to expand...
Click to collapse
Just tell me everything you did, step by step.

ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck

Sagz326 said:
ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck
Click to expand...
Click to collapse
radio and spl?'
But you have to have a custom recovery image before you can flash either of those.

i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position

yeah i have amonra

Sagz326 said:
i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position
Click to expand...
Click to collapse
Ahh you might brick, you seem to have flashed the Radio made for HTC hero not G1....Notice the title: "How to get Android 2.1 on HTC Hero"
To use Hero 2.1 on G1 it shows it here @ XDA, you only needed Haykuro SPL and the 26I radio/
If rec mode is working then you arent brick or if you can get into bootloader.

how do i get in rec mode or bootloader

Hold down home when turning on the phone=recovery
Hold down camera button while powering on= bootloader
If you can't get into either one of those, likely bricked. I know with WM devices flashing a radio for another phone is one of the fastest ways to brick your phone, Android seems to be much more forgiving, so hopefully you will be lucky and if recovery and bootloader don't work, you can possibly get ADB to work.

If you don't figure out how to do this BEFORE you do it, you will likely brick your phone, if not sooner, soon enough. Doing it along with a video isn't enough to make sure you won't brick your phone.
Read through the steps of rooting, flashing a basic, stock ROM, do that a time or two, and then get into the more up-to-date stuff.
Your method of going about a new task is going to... well, it isn't going to work, unless you are really, really lucky.

g1 dmd64 wont root

ill try many ways to root my g1 dmd64 1.6 and no way
it wont to down grade on 1.5
any helps is wellcome

dzevadnp said:
ill try many ways to root my g1 dmd64 1.6 and no way
it wont to down grade on 1.5
any helps is wellcome
Click to expand...
Click to collapse
You will get more helps from the QA section.
When you report a problem being as detailed as possible will only help.
it wont to down grade on 1.5
Click to expand...
Click to collapse
Is it not taking the .nbh file? Did it error out? If so what was the error?

nolimit78
i got when try to flash nbh file NOT ALOW some numbers 000..

dzevad
by the way il try many metods from xda dev. and theunlockr and nothing

dzevadnp said:
by the way il try many metods from xda dev. and theunlockr and nothing
Click to expand...
Click to collapse
You you have the right DreaIMG.nbh file? RC7 is Europe RC29 is US.

no limit
I tried both, still nothing. I get the same message not alow

Where did your device originally come from? The error is related to the nbh file not being compatible. You can Google for this and find lots of discussion about that error message. If it is not US or UK it may take some special steps. There is a process involving a "gold card" that may be what you need.

I am also having this issue. it is a USA Tmo G1 with the DMD64 1.6 update. mine flashes a screen that says "no img file then gets stuck on a 3 colored screen with the radio info. any ideas?

SOLVED
problem solved with goldcard from theunlockr guide

the_Guchi said:
I am also having this issue. it is a USA Tmo G1 with the DMD64 1.6 update. mine flashes a screen that says "no img file then gets stuck on a 3 colored screen with the radio info. any ideas?
Click to expand...
Click to collapse
Make sure the card is formatted fat32 and the DreaIMG.nbh is the only file on the card.

dzevadnp said:
problem solved with goldcard from theunlockr guide
Click to expand...
Click to collapse
I've searched there website for this information, can you post a link to some good instructions or possibly write your own? I wanna root my new DMD64 G1 I just received.

Oh god if there wasn't a way to re-root I would be so mad... man I'm an idiot for unrooting lol. Effing 2.0 >.<

prince.siraj said:
Oh god if there wasn't a way to re-root I would be so mad... man I'm an idiot for unrooting lol. Effing 2.0 >.<
Click to expand...
Click to collapse
anybody got any idea?

create godcard by this guide
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
them put on it by mem card adapter or reader rc29nbh or 7 nomether what g1 wil recive evrything from goldcard
turn of your phone
put goldcard with nbh file in phone
then turn on by holding camera buton and end key until bootloader screen turns on
hit end key to start update. DO NOT INTERUPT PROCES
once it is done hit trackball to rstart phone
now you are on stock version rc29 or7
now you can root by this easy guide
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
sorry for bad english
i hope this will help

I have firmware 1.6 build number DMD64, how would I go about rooting my g1?

i need help with the rainbow screen
my phone is stuck on the rainbow screen i take out the battery and put it back in and it automaticaly turns on and jusmps to the rainbow screen can anyone help me?

(Not Allowed)
Having same issue (Not Allowed)
Will try Goldcard method...
Note - I previously had installed Android 2.2 on this G1 then went back to 1.6 as it was performing ok but slowly....
Was about to try it again but had updated my firmware to DMD64 then I was getting (Not Allowed)
I'll let you know how I get on with GoldCard...

My phone runs fine but can't root it at all with the desktop program and androot 1.6 it says it roots it but then open rom manager and it tells me dont have super user permissions.

i used universal androot and it worked without the hassle of trensfering files to your sd.

Installed wrong nbh file help!!!

Ok first off I am really sorry for the stupidity and should have paid more attention. I was flashing the NBH on my Tilt 8925 and I got the wrong one! it was the KAISIMG-PANEL1-428.NBH that I downloaded and now the text is hard to read and it wont install and I cant change it. Right after I did that I found the forum that told you witch one to use. I wanted to cry!!! So what I'm asking is my phone done for? or is there a way to fix this? like through the andboot folder somehow?
Thank you for any help at all!!!
you learn from your mistakes though, I'm sure I wont do that again

Fixed it! :d
After I gave up I remembered someone said to hold the camera and the power button and reset buttons. I did that just to see what it would do and the colored screen came up with usb at the bottom. so I triad the right file and ran it again and it worked! Now I'll have to give it another go!
so this can be deleted now Thanks!

Just for future reference.
If you flash the wrong nbh with android, you should be able to flash the correct one using either the SD method, or the USB method.
Above all, do not panic, panic bricks more devices than bad flashes ever did
Since this is the Android area, I must say we are extremely lucky, since we are able to flash a new nbh without losing anything at all as far as the OS is concerned, your data and system files will remain intact, flashing an android nbh only replaces the zImage and the android bootloader files, unlike WM where you flash the whole OS and lose everything

Android
That's good to know because I thought I lost the phone for good. I didn't have any data on it that I needed, I was trying to install android to nand and just got the wrong NBH.
The only thing now that would keep me with WM 6.5 is cant get the wifi to work right. It connects to the router but the internet cuts out very bad, like it will work for 10 seconds then cant get it to work at all for 20min then it will load a web page then doesn't work again!

I did the same thing to my Tilt. I downloaded the Kaiser for Super Eclair and flashed it and did not not know I did not flashed the HardSPL.nbh.
I finally figured it out and flashed the HardSPL.nbh. It is at 3.29 right now. But I the phone keep getting error after the penguin screen with scrolling text. It said something about unable to read data. How do I fix this problem?

BeenAndroidized said:
I did the same thing to my Tilt. I downloaded the Kaiser for Super Eclair and flashed it and did not not know I did not flashed the HardSPL.nbh.
I finally figured it out and flashed the HardSPL.nbh. It is at 3.29 right now. But I the phone keep getting error after the penguin screen with scrolling text. It said something about unable to read data. How do I fix this problem?
Click to expand...
Click to collapse
Jesus... the last post is more the 1year old.
I know you must search, but if the last post is that old, the probability that everything in it is outdated, is near 100%.

Well, that is the what I found. I hate digging up old post especially when it's that old.

[Q] an idiot newbie desperately in need of help

can anyone advise if there is a stable froyo rom on here in 'zip' format
that does not need any radio/hardspl/ or recovery tweaks beforehand ? (hopefully with GPS, BT, Wifi, Camera etc working)
I genuinely have sweated blood over the last 3 days trying my best.
I have read all the guides, tried using ADB, Fastboot, Terminal Emulators etc
and for various reasons have always managed to crash and burn.
I really was after Lazlo's Froyo, but could not even get the Radio and Hardspl he advised on to the phone !
in desperation. I tried it anyway, and was very close to bricking the phone.
(thankfully though the help on here got me out of being stuck in fastboot)
I failed, even with the guide below ... as it said no room on device !
http://www.webnetta.com/2009/01/02/t-mobile-g1-rc30-to-jfv13/
I plead for a simple zip that I can apply via clockwork as I can manage that method ok.
I have found loads of zip files here:
http://www.filecrop.com/android-2.2-froyo-G1.html
would any of these be of help
anyone ?
thanks in advance

First of all what is your current state on the G1? (IE: SPL, radio, etc...)
And do you really want the froyo ROM to be loaded on your G1 only, or any would do to get your G1 up and running?

thanks for the response ...
the phone is currently running ok on the original 1.6 rom, but I had managed an spl update on it.
fastboot shows:
Dream 110 PVT 32B
HSPL.95.3000 (was hboot 0.95.000)
CPLD -4
Radio 2.22.19.261
Oct 20 (28?) 2008
in settings:
Firmware version 1.6
Baseband version 62.505.20.17U_2.22.19.261
Kernal version
2.6.29-00479-g3c7df37
[email protected] #19
Build number
DRC92
I don't know if all this is original as the Lazlo rom seemed to go on via clockwork,
but then hung, and somehow I got back booting to 1.6
ideally I would like to get Froyo on it

Have you look at [ROM] Froyo 2.2.1 for T-Mobile G1 " Froyo for Trout! " F4T1.8.2 (01/19/2011). You will have to load the SPL and radio that is related to the ROM. And it's Froyo.

sadly that was the one I previously went for.
I did the sdcard ok, but could not get the radio & spl images flashed to phone with either adb or emulator whatever I tried.
usb drivers are on ok, I have the sdk, and despite showing up in windows device manager, and connecting fine when mounted,
adb will not connect to device.
if this Radio and the SPL were available in zip, rather than .img format I could succeed.
I have really browsed all the roms in the Rom Bible link, but cannot find one that does not require these type of fixes.

I was having the same problem with mine the other week. I could not use the img file so I had to mannually search for those zip files.
Afterward this is what I found. See if that helps.
HERE ARE THE DOWNLOADS FOR NEW SPL/RADIO RAM HACK!!!!!
http://cdn.movilzona.es/repos/superatmel/ROMS/superblerv1/15M/hboot0013d-signed.zip
http://cdn.movilzona.es/repos/superatmel/ROMS/superblerv1/15M/radio-2_22_27_08-signed.zip
Click to expand...
Click to collapse

the links unfortunately give me a 404 !
John Denver once sang
'Some days are Diamonds,some days are Stone'
with my luck lately I suspect I was born in a quarry !

@beandroidized
maybe it was a diamond quarry after all !
I got the filenames (radio-2_22_27_08-signed.zip & hboot0013d-signed.zip)
from those dead links, put them into google and got them both via Mediafire !
so thanks a lot there my friend,
I'll have a go at flashing both, and the Laslo rom, tomorrow afternoon and will let you know how I get on.
regards,
Kevin

Good for you. And you are welcome. Good luck.

@beenandroidized ....
everthing did go well and I have now got Froyo !
sorry for late reply as I have been a bit under the weather last few days

carkev said:
@beenandroidized ....
everthing did go well and I have now got Froyo !
sorry for late reply as I have been a bit under the weather last few days
Click to expand...
Click to collapse
No worry, I figured you had a good turnout after the last post. Thanks for the updates. Enjoy!!!!