Database Develop

No screen...how do i change it back??

Hey guys,
I stupidly dropped my phone in water and awaiting it to dry out, i cant take it back to the store yet as havent changed the ROM back as cant see the screen. Is there anyway of doing it without having to know off by heart the on screen instructions. The screen doesnt seem to repond to anything either. I get the vibrate to tell me its on and that about it, sometimes the SE logo in full oclour before it all blurs and becomes a mash of colour.
I have the stock ROM ready to upload (as kindly retrieved from here) but dont know how to go about changing it now.
Cheers

take urx1 to consumer care center and ask them to look after for u！

Is that a dig at my predicament

eu sorry for my poor english! u use the word “dig”？ does it means know orunderstand？ or sth else？or a slang？

firepigs said:
eu sorry for my poor english! u use the word “dig”？ does it means know orunderstand？ or sth else？or a slang？
Click to expand...
Click to collapse
open ur battery cover .remove the battery.keep it under a bright light or something slightly warm.
Dont try to start ur phone.
Kepp it this way for bout 5 days.
ur phone will work..deopped mine in the basin and did this..mine works fine..
other than that i dont see a way to flash the rom..

OK, are you having a laugh at my expense firepigs? haha!??

x1fan said:
OK, are you having a laugh at my expense firepigs? haha!??
Click to expand...
Click to collapse
absolutely not！ u my lovely buddy huh i just Little wonder ！nothing else

rotastrain said:
open ur battery cover .remove the battery.keep it under a bright light or something slightly warm.
Dont try to start ur phone.
Kepp it this way for bout 5 days.
ur phone will work..deopped mine in the basin and did this..mine works fine..
other than that i dont see a way to flash the rom..
Click to expand...
Click to collapse
Ive already tried to start the phone a number of times. I will do what you suggest now...and also try and locate myself a temporary phone Cheers for your advice rotastrain

x1fan said:
Ive already tried to start the phone a number of times. I will do what you suggest now...and also try and locate myself a temporary phone Cheers for your advice rotastrain
Click to expand...
Click to collapse
yep best wishes to ur xperia！

I say, do it by yourself !
First buy the LCD screen (example) Then watch this video and go on, just be gently and organized

Flashing ROM while charging..

Normally I would fully charge the phone before flashing anything, but since Cyanogen just released his new 4.1.6, I wanna flash it right away ! My battery has 67% left. Can I plug the phone into the charger and flash it ?
Thanks in advance

Yes, you can charge your phone and flash at the same time. I always do.

I can't tell you from a tech perspective if it's okay but I can speak from personal experience that it doesn't do any bad. I do it all the time

the only reason they say to have a fully charged battery is so that during the flashing process your phone will not die and possibly leave you with a brick but as yellow (ffff00) said you can flash with your phone charging. i always do too.

Lol, yes you can . Have fun with new version.

david1171 said:
the only reason they say to have a fully charged battery is so that during the flashing process your phone will not die and possibly leave you with a brick but as yellow (ffff00) said you can flash with your phone charging. i always do too.
Click to expand...
Click to collapse
compliments on your hexidecimal knowledge

ffff00 said:
compliments on your hexidecimal knowledge
Click to expand...
Click to collapse
how else am i going to do edit .xml's for color lol

Your phone must be over 30% when flashing a rom

gridlock32404 said:
Your phone must be over 30% when flashing a rom
Click to expand...
Click to collapse
oooooh you say it so sternly. how do you know have you tried flashing a rom when you have 31% and it went fine, but when you did it at 30% it died lol. actually i have read this as well.

I never flash while charging. I'm too paranoid of power surges causing a flash to go ugly. And I've had equipment on good quality surge supressors die from power surges before so I don't trust those either.
Therefore, battery power flashes only for me

Flashing with the cable is always the best way to go.. If something goes wrong you are going to have to plug it in anyway
But i have not had any problems thus far.
I see most of the Rom now request the you should have atleast 50% battery life left

Shawn Botha said:
Flashing with the cable is always the best way to go.. If something goes wrong you are going to have to plug it in anyway
But i have not had any problems thus far.
I see most of the Rom now request the you should have atleast 50% battery life left
Click to expand...
Click to collapse
Psssshhhhhht
get your RUU and WM butt outta here, this is Android, a system that doesn't treat it's users like idiots...... hehe sorry, I do NOT miss using RUU on my HTC Kaiser. I hated the fact that it absolutely would NOT flash your phone unless you had at least 50% batt.

Seems you got your answer so I'd like to point out, am I the only one that does things first then asks questions later?? Lol

Strless01 said:
Seems you got your answer so I'd like to point out, am I the only one that does things first then asks questions later?? Lol
Click to expand...
Click to collapse
No you're not alone. I do stuff, then don't ask questions later or i shoot first and ask later

why bother asking, just turn and walk away like nothing happened (don't forget to whistle, nobody ever looks suspicous when they whistle) nope wasn't me

gridlock32404 said:
why bother asking, just turn and walk away like nothing happened (don't forget to whistle, nobody ever looks suspicous when they whistle) nope wasn't me
Click to expand...
Click to collapse
Lmao also when someone asks if it was you, curse them out and be like "WHY THE HELL WOULD YOU BLAME ME?!". They'll feel stupid for themselves and better yet you'll feel stupid for them because they actually believed you. HEHE

nope deny deny deny, caught on camera, wasn't me, just act like you have no clue what they are talking about or my personal fav just ignore them and start talking to yourself about something that makes no sense at all.
what do you mean, penut butter is a good shampoo cottage cheese is a great shop, stop looking at me funny, little cricket, i will tickle you till you poop boulders

So just because the LED doesn't come on to show the phone is charging in recovery, it is actually charging? I always flash when my battery is about 20% so I really hope it is charging

AdrianK said:
So just because the LED doesn't come on to show the phone is charging in recovery, it is actually charging? I always flash when my battery is about 20% so I really hope it is charging
Click to expand...
Click to collapse
Yeah it's charging

careful with flashing

i just wanted to make this thread to warn people. my phone just broke. wont turn on. and i have tried everything!!! the same thing happened to mssmison's old phone. and we think its just from flashing so many times that we just wore out the rom. i have probably (no lie) flashed my phone 60 times if not more. so i just wanna let everone know to go easy on the flashing as you may eventually break your phone!!!
i honestly dont think android messed it up i just wore the phone out.
android is not the cause of my phone crashing. so you can flash android to your phone, just dont go all buckwild on it and flash it like a fat guy at dunken donuts

cp0020 said:
i just wanted to make this thread to warn people. my phone just broke. wont turn on. and i have tried everything!!! the same thing happened to mssmison's old phone. and we think its just from flashing so many times that we just wore out the rom. i have probably (no lie) flashed my phone 60 times if not more. so i just wanna let everone know to go easy on the flashing as you may eventually break your phone!!!
i honestly dont think android messed it up i just wore the phone out.
Click to expand...
Click to collapse
Wow...
Sorry to hear about that.
Thanks for the heads up.

Sorry to hear that So it won't turn on at all, nothing? reboot button does nothing? Stinks man =/
I've noticed my phone sputter a few times when I was flashing, or rebooting, like I'll have to press reboot a few times before it responds. I always wonder how long this thing can possibly endure.

JM-PDA said:
Wow...
Sorry to hear about that.
Thanks for the heads up.
Click to expand...
Click to collapse
thanks. yeah its my own fault for flashing like crazy. i do have ord so thats my excuse lol but i think that this thread and tatnai's faqs thread need to be stickied

berardi said:
Sorry to hear that So it won't turn on at all, nothing? reboot button does nothing? Stinks man =/
I've noticed my phone sputter a few times when I was flashing, or rebooting, like I'll have to press reboot a few times before it responds. I always wonder how long this thing can possibly endure.
Click to expand...
Click to collapse
yeah its completely dead. wont turn on to save its own life. i just want to help everyone by posting this thread and warning them about flashing to many times. this is by no means warning people about android.

cp0020 said:
yeah its completely dead. wont turn on to save its own life. i just want to help everyone by posting this thread and warning them about flashing to many times. this is by no means warning people about android.
Click to expand...
Click to collapse
pull the battery, push the power button, put in battery, power button?

mrkite38 said:
pull the battery, push the power button, put in battery, power button?
Click to expand...
Click to collapse
Anyway that you can reflash to have it serviced or replaced?
Or if you just take it in and let them know that it died.

cp0020 said:
i just wanted to make this thread to warn people. my phone just broke. wont turn on. and i have tried everything!!! the same thing happened to mssmison's old phone. and we think its just from flashing so many times that we just wore out the rom. i have probably (no lie) flashed my phone 60 times if not more. so i just wanna let everone know to go easy on the flashing as you may eventually break your phone!!!
i honestly dont think android messed it up i just wore the phone out.
Click to expand...
Click to collapse
poopy poopstick

mrkite38 said:
pull the battery, push the power button, put in battery, power button?
Click to expand...
Click to collapse
ive tried that. i literally tried everything

JM-PDA said:
Anyway that you can reflash to have it serviced or replaced?
Or if you just take it in and let them know that it died.
Click to expand...
Click to collapse
i have insurrance on it. its completely dead so there is no way they can find out that i unlocked it

cp0020 said:
i have insurrance on it. its completely dead so there is no way they can find out that i unlocked it
Click to expand...
Click to collapse
Well, at least that's good...

cp0020 said:
i have insurrance on it. its completely dead so there is no way they can find out that i unlocked it
Click to expand...
Click to collapse
good! I just took my insurance off... starting to wonder if I made a mistake lol.

updated first post with some humor lol

berardi said:
good! I just took my insurance off... starting to wonder if I made a mistake lol.
Click to expand...
Click to collapse
put insurance back on it man lol you never know if your phone will have a heartattack like mine

cp0020 said:
put insurance back on it man lol you never know if your phone will have a heartattack like mine
Click to expand...
Click to collapse
have you tried a different battery just to make sure?

Barogi44 said:
have you tried a different battery just to make sure?
Click to expand...
Click to collapse
yes. like i said....i tried everything

cp0020 said:
yes. like i said....i tried everything
Click to expand...
Click to collapse
Man! Sorry to hear the bad news. When I saw the thread I quickly switched back to Myn's Warm Donut (Nand). I guess I will need to go to rehab for my ORD.

j8971 said:
Man! Sorry to hear the bad news. When I saw the thread I quickly switched back to Myn's Warm Donut (Nand). I guess I will need to go to rehab for my ORD.
Click to expand...
Click to collapse
lol its not the rom. i just flashed waaaayyy to many times.

cp0020 said:
lol its not the rom. i just flashed waaaayyy to many times.
Click to expand...
Click to collapse
Please, I am in need of help! I flashed the rom with my 1gb sd card, but when I took it out after booting into the rom, I put my 4gb sd card back in and the phone will not recognize it. All my apps are on there and that is where I want them to stay. Please help me.

cp0020 said:
lol its not the rom. i just flashed waaaayyy to many times.
Click to expand...
Click to collapse
I read about this some times.
After diagnostic service only one answer: memory chip died.

HELP With SetCPU Settings.......

Someone PLEASE give me some good proper settings for the SetCPU. I have VEGAn TAB Gingerbread Edition 7.0. Kernal Version says: 2.6.32.36-cyanogenmod [email protected] #1.
I know someone on here is using this...so let me know how to set this up using my G Tablet.
I want faster performance at the same time...extending battery life a little. Either way..nothing to make it overheat tho.
Let me even know the specs i posted will work with SetCPU. Thanks.

Performance and battery life are opposites. You have to underclock to get more battery life.
Oh.. and it's a kernel not kernal.
Sent from my GB Galaxy Tab using Tapatalk.

Typo in my spelling. But theres a middle where you can set to get a little of each. Anyway...anyone??????????

Not gonna happen. If you do anything to make it faster it increases power consumption, period. The On Demand governor, default, does the best job of letting you go 100% when you want and drop to a low freq when you are idle.
Sent from my GB Galaxy Tab using Tapatalk.

rustyshack3 said:
Not gonna happen. If you do anything to make it faster it increases power consumption, period. The On Demand governor, default, does the best job of letting you go 100% when you want and drop to a low freq when you are idle.
Sent from my GB Galaxy Tab using Tapatalk.
Click to expand...
Click to collapse
Ok..are you using this? Would you know any good settings for this GTab? I dont wanna do anything and overheat it or put the wrong settings and stuff. You know. Any bad side effects?
Edit: Dumb question but...if i use this plugged in alot...in my room..then all the power it uses would be for the good right? can't kill the battery then.
Edit 2: One more question..if there was something you didnt like about it...does just uninstalling it put your phone right back to how it was? Or a little more tweaking you need to do before you uninstall?

DJR0D said:
Ok..are you using this? Would you know any good settings for this GTab? I dont wanna do anything and overheat it or put the wrong settings and stuff. You know. Any bad side effects?
Edit: Dumb question but...if i use this plugged in alot...in my room..then all the power it uses would be for the good right? can't kill the battery then.
Edit 2: One more question..if there was something you didnt like about it...does just uninstalling it put your phone right back to how it was? Or a little more tweaking you need to do before you uninstall?
Click to expand...
Click to collapse
As I recall, running VEGan 7.0 I used SetCPU no higher than 1.2 w/interactive. No noticeable drag or heat. Perhsoot builds great kernels but I seem to recall using Blades or Clemsyn but could be wrong. Unless you find a way to clock so far out of parameters (voltage/speed) I seriously doubt you can irreparably fry your GTab. Using the wrong power adapter would be more likely to nuke a tab. IMO.
Using plugged in logically it's a wash as you use what you charge. I'm no expert in electronics. Others may have more input here.
I have always re-flashed ROMs to reset. That way you know you cover the custom kernel. Some have had success flashing only the kernel. YMMV.
Always proceed after a good backup!

skeeterpro said:
As I recall, running VEGan 7.0 I used SetCPU no higher than 1.2 w/interactive. No noticeable drag or heat. Perhsoot builds great kernels but I seem to recall using Blades or Clemsyn but could be wrong. Unless you find a way to clock so far out of parameters (voltage/speed) I seriously doubt you can irreparably fry your GTab. Using the wrong power adapter would be more likely to nuke a tab. IMO.
Using plugged in logically it's a wash as you use what you charge. I'm no expert in electronics. Others may have more input here.
I have always re-flashed ROMs to reset. That way you know you cover the custom kernel. Some have had success flashing only the kernel. YMMV.
Always proceed after a good backup!
Click to expand...
Click to collapse
Thanks alot for the reply. See...i don't flash or anything like that. Haven't took the time to learn it..when i know i need to.
I was hoping no kind of reflashing was involved. So your saying uninstalling it may not put things back like it was?
Also curious on this one..that "Set to Boot" thing..if you DON'T check that...does that mean whenever you reboot...it goes back to normal? And you have to open SetCPU again and again to set it up?
And of course checking it would mean it stays that way i guess. Just heard a few weird stories that you can't uninstall it. But even if i do..wanted to seriously know if everything will go back like it was. Thanks again.

DJR0D said:
Thanks alot for the reply. See...i don't flash or anything like that. Haven't took the time to learn it..when i know i need to.
I was hoping no kind of reflashing was involved. So your saying uninstalling it may not put things back like it was?
Also curious on this one..that "Set to Boot" thing..if you DON'T check that...does that mean whenever you reboot...it goes back to normal? And you have to open SetCPU again and again to set it up?
And of course checking it would mean it stays that way i guess. Just heard a few weird stories that you can't uninstall it. But even if i do..wanted to seriously know if everything will go back like it was. Thanks again.
Click to expand...
Click to collapse
Not a problem. We were all noobies at one time!
Flashing sounds like trouble but if/when done right it's simple. Trust me, you will one day laugh at remembering how anxious you were about it.
Check your other post. Doing a nandroid backup thru CWM will make a FULL BACKUP of everything on your GTab as it is right now. It's way simple to do really and can save your ass if something goes wrong.
Set To Boot means just what you think. If you leave it unchecked your GTab will revert to stock speed. Set To Boot means when your GTab reboots it goes back to overclock speed you set.

skeeterpro said:
Not a problem. We were all noobies at one time!
Flashing sounds like trouble but if/when done right it's simple. Trust me, you will one day laugh at remembering how anxious you were about it.
Check your other post. Doing a nandroid backup thru CWM will make a FULL BACKUP of everything on your GTab as it is right now. It's way simple to do really and can save your ass if something goes wrong.
Set To Boot means just what you think. If you leave it unchecked your GTab will revert to stock speed. Set To Boot means when your GTab reboots it goes back to overclock speed you set.
Click to expand...
Click to collapse
Yea..had a feeling thats what the BOOT part meant. Just wanna be sure. And the ROM manager thing..im getting ALOT of negative things about it working NOT good with the GTab. Even my thread on here has a few people saying that. My gut keeps telling me when i try this...something will go wrong...then ill thing " Why did i have to try this..there was nothing wrong with my Tablet before this". You know. That lil voice.
Thats true about how we are were the same at one time. I hate when certain people think they never were. Funny.
Are there teps to nandroid backup without that ROM Manager? I want the easiest way possible.
Plus...how can i tell which Bootloader i am...you know..they say its either 1.1 or 1.2. I bought mine already flashed. Cant get ahold of the dude to ask him.

DJR0D said:
Yea..had a feeling thats what the BOOT part meant. Just wanna be sure. And the ROM manager thing..im getting ALOT of negative things about it working NOT good with the GTab. Even my thread on here has a few people saying that. My gut keeps telling me when i try this...something will go wrong...then ill thing " Why did i have to try this..there was nothing wrong with my Tablet before this". You know. That lil voice.
Thats true about how we are were the same at one time. I hate when certain people think they never were. Funny.
Are there teps to nandroid backup without that ROM Manager? I want the easiest way possible.
Plus...how can i tell which Bootloader i am...you know..they say its either 1.1 or 1.2. I bought mine already flashed. Cant get ahold of the dude to ask him.
Click to expand...
Click to collapse
OK. How to tell what bootloader you have....here.
Install CWM Guide here.
CWM is the only way I know of to do a complete nandroid backup. Installing CWM just for that makes it indispensable.
ROM Manager on the GTab is iffy at best. Works well on other tablet but not so much on GTab. I used it for informational purposes only.
I know that "little voice". We all have heard it. But having a full backup helps quiet it. I would not suggest you get to tweaking until you have a nandroid backup via CWM. That dreaded "something" will go wrong. It happens to most all on here who want to learn. Nothing like a soft bricked tablet to motivate one!
Just a suggestion. Before you get in too deep. Spend a week or so just reading the forum. Learn to use the Search function (It will save your butt many many times). Keep your threads condensed. (Two SetCPU threads can be confusing) and keep reading...
Oh, and relax. Pretty much whatever one does to a tablet can be fixed. I said "pretty much"! lol

skeeterpro said:
OK. How to tell what bootloader you have....here.
Install CWM Guide here.
CWM is the only way I know of to do a complete nandroid backup. Installing CWM just for that makes it indispensable.
ROM Manager on the GTab is iffy at best. Works well on other tablet but not so much on GTab. I used it for informational purposes only.
I know that "little voice". We all have heard it. But having a full backup helps quiet it. I would not suggest you get to tweaking until you have a nandroid backup via CWM. That dreaded "something" will go wrong. It happens to most all on here who want to learn. Nothing like a soft bricked tablet to motivate one!
Just a suggestion. Before you get in too deep. Spend a week or so just reading the forum. Learn to use the Search function (It will save your butt many many times). Keep your threads condensed. (Two SetCPU threads can be confusing) and keep reading...
Oh, and relax. Pretty much whatever one does to a tablet can be fixed. I said "pretty much"! lol
Click to expand...
Click to collapse
So, to check which branch you are on if you are on STOCK: Go to Settings -- About Tablet -- Tapu UI Version.<<< I dont see that Tapu UI anywhere in my About Tablet. Hmmm. But i am running VEGAn TAB. I DO see Build Number: GRI40.
When in read how to check the bootloader thing..he did say something like ' If i have a lock screen..i must be on 1.2. I DO have a lockscreen. So 1.1 doesnt have any lock screen when the Tablet starts up????
But just a weird question...wouldnt i already have CWM if i have VEGAn TAB on here already?? I thought yes. I DO wanna speed this baby up a little bit. Doesnt have to be SUPER fast. Just a little faster startup and faster when i click apps or menu stuff. I want a Motorola Xoom soon. Wanna sell and trade up stuff for it.
I also wouldnt mind VEGA n TAB 7.1...i think they said the Camera works in that version for Skype and other stuff..not sure. Im a paranoid person with certain things in life. I guess this is one of em. Weird...im good with computers. Programs and stuff a little bit.
Guess i should just DL SetCPU and run it..just dont click set on BOOT.
Edit: WOW..those steps in how to install CWM is point on. Thats what i like...the DUMMY style step by step. Every word. You know..until we learn how to do it. Some people would explain..then say a certain word and ill be lost. That one was good. Thanks alot for the kind words and help. I really appreciate it.
Edit 2: I can put the zoip to CWM onto the internal SD of the GTab right? Even if theres alot of stuff already in it???
Edit 3: In the CWM folder i downloaded...i see the update.zip...zipped..and a folder that says Recovery. Strange..in the steps to install CWM...it says everything but it doesnt say what to do with this folder...even tho i think it should be in there no????

DJR0D said:
Ok..are you using this? Would you know any good settings for this GTab? I dont wanna do anything and overheat it or put the wrong settings and stuff. You know. Any bad side effects?
Edit: Dumb question but...if i use this plugged in alot...in my room..then all the power it uses would be for the good right? can't kill the battery then.
Edit 2: One more question..if there was something you didnt like about it...does just uninstalling it put your phone right back to how it was? Or a little more tweaking you need to do before you uninstall?
Click to expand...
Click to collapse
No. I used it on a different tab that I wanted to underclock to get battery life. The Galaxy tab is fast enough that I dont desire to overclock, so cpuset is useless to me.
Sent from my GB Galaxy Tab using Tapatalk.

Accidently Deep Fried my Galaxy S at 454° for 4 min :(

So I went to look check my phone, and it slipped from my hand, tried grabbing it, Felt like slow-mo, and just missed it, and watched it fall into the deep fat fryer, So I then had to watch it cook for 4 mins at 240°C.
Obviously turn of the fryer, and tried to dig out with tongs.
The interesting thing is it still works! Tad greasy, absolutly EVERYTHING work, Apart from the speak, So its now useless as a phone :/
Is the speaker user replaceable?
Pictures of a surprisingly undamaged phone considering what it went through.
* http://i.imgur.com/VNTle.jpg
* http://i.imgur.com/Xir7Y.jpg
* http://i.imgur.com/sJqCT.jpg
* http://i.imgur.com/wDZHd.jpg

Bouncer5 said:
So I went to look check my phone, and it slipped from my hand, tried grabbing it, Felt like slow-mo, and just missed it, and watched it fall into the deep fat fryer, So I then had to watch it cook for 4 mins at 240°C.
Obviously turn of the fryer, and tried to dig out with tongs.
The interesting thing is it still works! Tad greasy, absolutly EVERYTHING work, Apart from the speak, So its now useless as a phone :/
Is the speaker user replaceable?
Click to expand...
Click to collapse
well, that's a pretty interesting story, man.
do you mean the speaker is broken or the microphone? you'll probably be able to get it repaired by samsung assuming you have a warranty on it.

With respect, would you really trust a phone, even repaired that you DEEP FRIED for 4 minutes? Be lucky you can get your data off it and buy a new phone!

harriisnotinabox said:
you'll probably be able to get it repaired by samsung assuming you have a warranty on it.
Click to expand...
Click to collapse
Do you really think so They'll see you coming from miles away. You caused the damage yourself, it's not like it's a design fault.

i mean what were u thinkin man..........just cant beleive it u actually fried ur phone..............4 mins in fryer , u might as well eat it like a gingerbread dessert or something

samiulislam16 said:
i mean what were u thinkin man..........just cant beleive it u actually fried ur phone..............4 mins in fryer , u might as well eat it like a gingerbread dessert or something
Click to expand...
Click to collapse
Hmmm deep fried Gingerbread...lol
In all honesty, funkyblue is right. Get what data/contacts you can (if not backed up to google) and get yourself a new phone. If your headset port isn't caked up with grease then maybe you can use it as a glorified MP3/music player.
How on earth did the battery not die?

Forget the speaker, I think the main thing we are all curious about is...do you eat a deep fried SGS with ketchup, or malt vinegar?

Post the pics

BAHAHAHAHA (sorry!), this is the funniest title since someone deep froze their sgs (iirc).
But as to your question, I wouldn't be surprised if the speaker is replacable, iirc its a modular component!
EDIT: wait, was it 454 or 240 degrees? Big difference

or you can keep it and use phone with bluetooth headset???

Pictures have now been added, Sorry for the delay!
The speaker is now working albeit very quietly, There is this greasy ring inside the camera when taking a picture, Guessing oil is trapped in there.
oswade said:
EDIT: wait, was it 454 or 240 degrees? Big difference
Click to expand...
Click to collapse
It was 240 C. Or 454 F.

Bouncer5 said:
Pictures have now been added,
Click to expand...
Click to collapse
Love the simcard

May I respectfully suggest that coating the phone in batter next time will offer a degree of protection, and add immeasurably to the taste and texture!
Sent from my GT-I9000 using xda premium

@slaphead some marinade would do the work as well

spamtrash said:
@slaphead some marinade would do the work as well
Click to expand...
Click to collapse
Marinade then deep fry?!......me thinks you won't ever win masterchef!
Sent from my GT-I9000 using xda premium

Try it, it will change the awful taste of polymer case into festival of CDS :]

friend, get the data off the phone and then give it to :
http://forum.xda-developers.com/showthread.php?t=1236273

let's wait for icecream sandwhich, and then someone should try it again, and then let's check, which one tastes better...