Hello all,
i tried to flash a rom "Christian_NL_2502_Full" and ruu give an error "262" every time so tried sd flash feature but that wont work either can someone help me what i am doing wrong.
Specs
original rom is r3a
kovs110
spl-0.78.0000
microp1-787
microp2-707
Related
Hello,
After cooking my own custom rom, and flashing it using USPL, the herald does not boot.
I can only recover the phone by getting the bootloader and flashing an original ROM.
I tried to extract and flash the OEM rom to test, and this rom does not boot as well.
What am I doing wrong in order to get the Herald not booting?
Thanks,
StefanSki
To be more precise, I extraced the OS.nb from the original HTC NBH file, and I just rebuild a NBH with HTC Rom Tool.
Then I flashed is using the USPL tool. Flashing went to the end successfully but then the device shows only a black screen.
I tried doing a hard reset, and then the device stop on the HTC logo screen.
Can someone explain how it does not boot?
I can't explain it to you, but I had the same problem. I can't imagine why, but I have dumped the complete ROM and XIP and then build a new OS.bin and used HTC ROM Tool with this to create a nbh.
hi guys,
i have used SPLXploit and it displays success
i tried flashing immediately with
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship
but the error message shows "Wrong vendor ID"
now my bootloader page shows:
TRIN100
IPL 0.50
TRIN100
SPL- 3.03.0000
Have tried flashing SPL 1.2oli and it says Error 270 image file corrupted.
Am i right to say i can immediately flash a official rom without installing HARD SPL?
or can i install HardSPL and try installing another cooked rom?
Or can i install the official rom using the minisd method?
Questions Questions
Hi,
i have problem with flashing my X1 with custom ROM
In Rom update utillity there is message: Error 262
On display is: KOVS 110
SPL-0.78.0000
Micro P1-787
Micro P2-787
Please help me!
What i can do with this error and how i can unlock my phone?
Before you can flash a custom ROM you need to hardSPL your phone. It isn't yet, because bootloader says "SPL-0.78.0000" and not "SPL-0.72.OliNex".
http://forum.xda-developers.com/showthread.php?t=431218
After you hardSPL'ed your phone you can flash custom ROMs.
gl
Yeeeah
Yeeah!
I did it!
Thank you very...very...much!
Can i flash the new radio(2.22.27.08) and spl(1.33.0013d) via the ClockworkMod 2.5.0.7 recovery(or RA 1.7.0)??
I have the files downloaded from a mytouch 3g thread and want to know if i can flash them over the recovery?it says there they are flashable but can i flash them with an HTC Dream??
wipe-flash radio-wipe-flash spl-wipe-flash rom
or will i brick my device??
Or can someone send me a german introduction how to set up fastboot on windows xp??i dont get the english one
Phone: HTC Dream (rooted)
ROM: COS-DS 03042011 2.3.3 Gingerbread
Radio: 2.22.23.02
Spl: 1.33.2005
sdcard: 2gb ; ext/3
You can flash spl and radio using recovery, but I would *not* suggest you to do so, because the risk of bricking your phone is much higher, than flashing by fastboot.
To setup a fastboot environment on XP you can try to have a look at www.android-hilfe.de There are many people using a windows environment and I suppose they have a setup instruction in German, too.
I agree. To flash it via Fastboot safer. First flash Bootloader and reboot your phone, then flash new radio and reboot phone again.
thanks for reply!i will try it now with fastboot!if it wont work i try it via recovery
Helo
I have a question. I flashed via fastboot the radio(2.22.27.08) and spl(1.33.0013d) and i have a problem with the batery. I want to put back the old radio and spl and the problem is that i cannot flash it via fastboot the mesage is:
failedremote:signature verify fail)
Somebody some ideas
Pls read the OP of ezTerry's 2708-thread (a link can be found in my signature). But I doubt, that the radio is the reason for your battery problems.
Sent from my Gingerbread on Dream using XDA App
Agreed with AndDiSa. It also depending on what ROM you use and the apps that you have on your phone.
I made the change of radio and spl like in the link in the signature and it was ok(Radio: 2.22.27.08, SPL: 1.33.0013d), the flashing was working. The rom is update-cm-6.1.0-RC1-DS-2708port_S.zip because the update-cm-6.1.0-DS-2708port_S.zip is entering in boot loop.
Like you sad that this is probably a radio image problem that's why i tried to flash the old image back with the spl and i had that error message. Also I tried to change my splash image via fastboot(to flash it) and the result is the same
Mine is also bootlooping on COS-DS rom with this radio/hboot combo...probably just a radio error or something
hi all
plz help my phone can not boot only htc logo and recovry mode
when flash any rom error mount
when format failed error mount
so plz any one have rom for o2 uk