I have followed your wise words, and thanx ever so much for the advice, but it is coming up with:
ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance
ANY IDEAS?
Could you be any less specific about what you are trying to do!?
I guess that you are trying to flash a new ROM from the error message you quote. In which case there is very comprehensive guide stickied at the top of this forum.
Thread closed! Oh wait... Where's Fallen Spartan?
I had this useful info from Fallen Sparten:
You need to use HSPL 1.56 for roms based on 1.56+. This should solve all your issues.
Read and follow this guide. As you already have HSPL 1.14 all you need to do is flash HSPL 1.56 and then flash chosen rom (Duttys 6.5)
Post future flashing queries within that thread. Thread closed
__________________
So I tried to flash 156Olinex and im getting that error message.
If you read my previous post in last thread before I closed it, I asked you to post your future flashing queries within the dummies guide thread. No need to create new thread
Thread closed
Related
hi,
after flashing the new O2 rom the hspl-flash-tool (1.56.OliNex) breaks up with the message "update error".
it seems that the new rom locket it.
is there any solution to unlock it?
thx
Katana1234 said:
any solution
Click to expand...
Click to collapse
look here: [USPL] - Blackstone USPL, or how to keep your stock SPL and flash cooked ROMs
Please post rom flashing problems in the Dummies Guide to flashing thread.
There are a few different Update Error codes though. Did you get a number with the error eg 262 or 280 as they mean different things
starbase64 said:
look here: [USPL] - Blackstone USPL, or how to keep your stock SPL and flash cooked ROMs
Click to expand...
Click to collapse
ClydeB1 said:
Please post rom flashing problems in the Dummies Guide to flashing thread.
There are a few different Update Error codes though. Did you get a number with the error eg 262 or 280 as they mean different things
Click to expand...
Click to collapse
thx 4 ur fast answers. i don't want to get a uspl, my prob is that i can't flash any other spl anymore.
after trying out a new 6.5, i had to reflash it because of an green-screen problem.
and since i flashed the new O2 version 1.57.207.1 im not able to flash any spl or rom. the only error i see is "update error" which seems to be a lock problem...
Katana1234 said:
thx 4 ur fast answers. i don't want to get a uspl, my prob is that i can't flash any other spl anymore.
after trying out a new 6.5, i had to reflash it because of an green-screen problem.
and since i flashed the new O2 version 1.57.207.1 im not able to flash any spl or rom. the only error i see is "update error" which seems to be a lock problem...
Click to expand...
Click to collapse
As I asked earlier? What is the number of the error you get as there are different meanings to each one of these?
Also, the mods will close this thread down, so please take any other questions to the Dummies Guide thread.
ClydeB1 said:
As I asked earlier? What is the number of the error you get as there are different meanings to each one of these?
Also, the mods will close this thread down, so please take any other questions to the Dummies Guide thread.
Click to expand...
Click to collapse
------------------------------------------------------------------------
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
------------------------------------------------------------------------
btw: soft reset didn't help
Please post in dummies guide thread. No need for another thread
Thread closed
I want to say thanks first for the help so far.
So I finally managed to hardspl but that was it unfortunatly.
Your dummies guide is quite good, but for someone not technical at all and normally not into handy programming etc???
HSPL3 is OK I have it.
As of HSPL4 I am stuck: I ran the the blackstone rapper with the nbh file, also ok
I do the hard reset and than I still have my old SFR etc on the phone (I have also the problem with the colours, but that is the least problem at the time)
I than tried to flash an other rom (Miri) and there I get error 240 (file open)
So I thought I do the hardreset again (bootloader showed than my old version, do not ask me why) I did everything again and I am stuck again.
After two days it starts being quite frustrating I must admit but i stay full of hope for your help
Thanks again
Reinhardbaer said:
I want to say thanks first for the help so far.
So I finally managed to hardspl but that was it unfortunatly.
Your dummies guide is quite good, but for someone not technical at all and normally not into handy programming etc???
HSPL3 is OK I have it.
As of HSPL4 I am stuck: I ran the the blackstone rapper with the nbh file, also ok
I do the hard reset and than I still have my old SFR etc on the phone (I have also the problem with the colours, but that is the least problem at the time)
I than tried to flash an other rom (Miri) and there I get error 240 (file open)
So I thought I do the hardreset again (bootloader showed than my old version, do not ask me why) I did everything again and I am stuck again.
After two days it starts being quite frustrating I must admit but i stay full of hope for your help
Thanks again
Click to expand...
Click to collapse
As I told you yesterday, please post your questions in the correct place. You have obviously read the Dummies Guide, so please post your question in that thread and do not start your third new thread. This thread will be closed as soon as the moderators find it.
If you have the colour problem your hspl was obviously not successful, are you sure that you did not try uspl, which may explain why your old spl is back?. In bootloader mode what spl is showing? It needs to show 1.56.Olinex (see picture)
ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded .nbh image is placed in the same directory as the RUUWrapper. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again. Check that the contents of the folder is a CustomRUU.exe file and an .nbh file.
Click to expand...
Click to collapse
If you post in the right place I'll try my best to talk you through the process, it's really not that difficult.
Please post your query within Dummies guide thread and myself or someone else will answer your query.
Please try and abide by forum rules in future. No need for new thread. This has now been your 3rd unnecessary thread. Consider this your first and last warning. Failure to comply with forum rules will result in a temporary ban!!
Ta
Rick
p.s. Thread closed
Hi,
I flashed the SPL with 1.56.OliNex but the Topix ROM is based on 1.59, is that the problem? but what can i do please? which HardSPL i must use? what is the appropriate spl?
ayingha said:
Hi,
I flashed the SPL with 1.56.OliNex but the Topix ROM is based on 1.59, is that the problem? but what can i do please? which HardSPL i must use?
Click to expand...
Click to collapse
1.56.Olinex is the correct spl to use for all 1.56+ based roms. What error code do you get when flashing the rom? Also, have you checked in bootloader that the spl does show as 1.56.Olinex?
As this is related to rom flashing, please post your queries in the following thread so as not to clog up the forum with unnecessary threads.
i get the 270 error code.
Can you move this thread in the good section please?
ayingha said:
i get the 270 error code.
Can you move this thread in the good section please?
Click to expand...
Click to collapse
Unfortunately I can't move it, just post your next reply in this thread - http://forum.xda-developers.com/showthread.php?t=505377 and I'll pick it up there.
With the error 270 do you get a message saying something like this -
"ERROR [270] : UPDATE ERROR
The image file is corrupted. Please check your Update Utility".
Click to expand...
Click to collapse
If so it sounds like your download file is corrupt, try to download it again.
As above, thread closed
hi i've got a new HD with old SPL-1.14.0000 i did all steps to HSPL
now i have SPL-1.45.0000 in boot loader
but when i want to flash any custom rom here it stops at 0% i'm now still with WM6.1 with the bad colors
plz help
Please post your queries here and don't create a new thread when one already exists.
Firstly you could not have followed HSPL correctly because if you had your spl would now be 1.56.Olinex, so that is where your problem lies. Read the steps again and repeat them checking the success at each stage.
As above, please post further queries within Dummies Giode thread. Link provided by ClydeB1 above
Thread closed
Hi,
I'm new to forums so apologies if I sound inexperienced!! I've got an HTC touch HD that I got from the carphone warehouse in the UK (connected to o2). It's currently got windows 6.1 but I'm wondering if it's possible to install 6.5 on it. HTC are telling me no but I've heard others have done it.
If it's possible can someone direct me to the download file and explain what I need to do to complete the install?
Many thanks
JW83
Install HSPL (up) and instal rom. There are many here. Sorry for my English I do not know good English. It is not difficult when I was able too.
It is possible, read the sticky threads, they will point you in the right direction.
But be aware you lose your warranty with WM6.5 on there. Just make sure you read up and understand before taking the plunge And welcome to the forum.
xmsnx said:
It is possible, read the sticky threads, they will point you in the right direction.
But be aware you lose your warranty with WM6.5 on there. Just make sure you read up and understand before taking the plunge And welcome to the forum.
Click to expand...
Click to collapse
The warranty-thing is not really true: if you don't read the steps etc, and your phone gets bricked (just software), HTC will not replace it for you.
This is where you need to start. Read this Guide carefully and then read it again for good measure. If you have any further specific questions then ask them in that thread and you'll get helped.
I have tried to downloade an ROM.
When its start to load the hole thing just stop. It stands on 0% for longe time to i unplug the USB.
I have tried everything.
Now im taking the Dummies guide..again..
xtineze said:
I have tried to downloade an ROM.
When its start to load the hole thing just stop. It stands on 0% for longe time to i unplug the USB.
I have tried everything.
Now im taking the Dummies guide..again..
Click to expand...
Click to collapse
Post your problems in the Dummies Guide thread please. You'll get help there as this one will probably be closed soon. Please also give more details of the errors, ie what error code you get and whether you have used uspl or hspl.
As above, please post in relevant thread and myself or someone else will assist you. ClydeB1 has already provided link to thread.
Ta
Rick
p.s. thread closed