hi i've got a new HD with old SPL-1.14.0000 i did all steps to HSPL
now i have SPL-1.45.0000 in boot loader
but when i want to flash any custom rom here it stops at 0% i'm now still with WM6.1 with the bad colors
plz help
Please post your queries here and don't create a new thread when one already exists.
Firstly you could not have followed HSPL correctly because if you had your spl would now be 1.56.Olinex, so that is where your problem lies. Read the steps again and repeat them checking the success at each stage.
As above, please post further queries within Dummies Giode thread. Link provided by ClydeB1 above
Thread closed
Related
Hy Guys,
I just hard spld my HTC Touch HD and all the colors of the screen look
oil smudged every time i boot up the device.
The htc logo , the wm6.1 screen have this problem
and after i refresh the screen (sleep button) it comes back to normal.
and everytime i reset the phone its the same thing until I refresh the screen
can anyone help me out ??
thank you
the attached image is a render of how horrible the screen looks.
Bad flash? Probably no HardSPL installed?
I suggest you read the Dummies Guide to see if you flashed correctly.
Then you can follow the steps to get your Blackstone normal again
from OliNex's post:
1) download Hard-SPL package from attachment, use 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip ) if you want to use new 1.5x ROMs. then extract to an empty folder.
NOTE: 1.14 HSPL (the original Unsigned_HardSPL_for_Blackstone_OliNex.zip) is good for only older ROMs, 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip) is good for newer ROMs. 1.56 is not backwards compatible with old ROMs. the incompatible ROM will still boot but screen is going to look funny which is a temporary issue but uncomfortable.
read more here
You flashed a 1.56+ ROM without having the 1.54 SPL! As suggested, use the Dummies Guide to flash HSPL. Or if you want to use USPL flash an official 1.56+ ROM first! (Then reflash this one.)
TronC said:
Bad flash? Probably no HardSPL installed?
I suggest you read the Dummies Guide to see if you flashed correctly.
Then you can follow the steps to get your Blackstone normal again
Click to expand...
Click to collapse
Common problem, posted countless times before. Try a little research before starting new thread. Any further problems, post in Dummies Guide thread
Thread closed
Hello Everybody,
I am trying to flash the Dutty Rom Win 6.5 for my HTC Touch HD. i have tried flashing the phone with Safest Instructions mentioned in the thread. I do run ruuWrapper but when it comes to the final point i.e Flashing after few minutes it goes to recovery of phone and the process stops there. Pls help me with same.
sagar_p2000 said:
Hello Everybody,
I am trying to flash the Dutty Rom Win 6.5 for my HTC Touch HD. i have tried flashing the phone with Safest Instructions mentioned in the thread. I do run ruuWrapper but when it comes to the final point i.e Flashing after few minutes it goes to recovery of phone and the process stops there. Pls help me with same.
Click to expand...
Click to collapse
Any queries regarding flashing should be posted in this thread.
Thread closed
I have followed your wise words, and thanx ever so much for the advice, but it is coming up with:
ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance
ANY IDEAS?
Could you be any less specific about what you are trying to do!?
I guess that you are trying to flash a new ROM from the error message you quote. In which case there is very comprehensive guide stickied at the top of this forum.
Thread closed! Oh wait... Where's Fallen Spartan?
I had this useful info from Fallen Sparten:
You need to use HSPL 1.56 for roms based on 1.56+. This should solve all your issues.
Read and follow this guide. As you already have HSPL 1.14 all you need to do is flash HSPL 1.56 and then flash chosen rom (Duttys 6.5)
Post future flashing queries within that thread. Thread closed
__________________
So I tried to flash 156Olinex and im getting that error message.
If you read my previous post in last thread before I closed it, I asked you to post your future flashing queries within the dummies guide thread. No need to create new thread
Thread closed
im kind of new to this. bought myself a htc hd, and i cant seem to update my rom via XT_Grid_Leo_2B . it just keeps getting stuck at 0% and shows the 262 error. tryed hard/soft reseting.. updating from the bootloader etc. any ideas? running windows 7 32
swatsqad said:
im kind of new to this. bought myself a htc hd, and i cant seem to update my rom via XT_Grid_Leo_2B . it just keeps getting stuck at 0% and shows the 262 error. tryed hard/soft reseting.. updating from the bootloader etc. any ideas? running windows 7 32
Click to expand...
Click to collapse
you need to look at the dummies guide for flashing custom/cooked ROMs,
http://forum.xda-developers.com/showthread.php?t=505377
I suggest you use USPL 2.5. READ AND FOLLOW INSTRUCTIONS STEP BY STEP
jigners said:
you need to look at the dummies guide for flashing custom/cooked ROMs,
http://forum.xda-developers.com/showthread.php?t=505377
I suggest you use USPL 2.5. READ AND FOLLOW INSTRUCTIONS STEP BY STEP
Click to expand...
Click to collapse
allright.. while flashing that spl thing :
HSPL2 - Flash new SPL (1.56.OliNex)
* (HSPL2a) Place your phone into its bootloader. <- done
* (HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
* (HSPL2c) If successful, go to step HSPL3. If the flashing process sits at 0% and you get Error [260] connection after some time, go to step (Troubleshooting). <- stuck at 0%
and yes, i always get the error, its stuck at 0% this is annoying.
Then you need to go to the section labeled Troubleshooting - manual SSPL
May help you more by posting in that thread. As I am pretty sure this thread will be closed.
i suggested you use USPL
swatsqad said:
allright.. while flashing that spl thing :
HSPL2 - Flash new SPL (1.56.OliNex)
* (HSPL2a) Place your phone into its bootloader. <- done
* (HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
* (HSPL2c) If successful, go to step HSPL3. If the flashing process sits at 0% and you get Error [260] connection after some time, go to step (Troubleshooting). <- stuck at 0%
and yes, i always get the error, its stuck at 0% this is annoying.
Click to expand...
Click to collapse
i suggested you use USPL 2.5, if you have i maybe able to assist you. instead you reported using HSPL. Sorry cant help you with HSPL, I've no experience using it.
jigners said:
i suggested you use USPL 2.5, if you have i maybe able to assist you. instead you reported using HSPL. Sorry cant help you with HSPL, I've no experience using it.
Click to expand...
Click to collapse
ok thanks for the support! i managed to flash it via SSPL-Manual-TouchHD . worked perfectly.
although i have one last question.. is there any way i can disable the notification screen when pressing on the status bar? i remember the old days, when i had a xda II, i like the old notifications more...
Original query ansered. Thread closed.
In future please use the search function before creating a new thread.
Any other queries on roms should be directed to that rom thread.
Hi i'm fabio... Yesterday i saw a post that says to use task29 to flash new ROM.. i've used task 29 but my HD blocks himself on the initial message "smart mobility" and in bootloader mode appears this message:
BLAC100 32M
SPL-1.14.0000
MicroP-Blackstone (LED) v6
In USB mode i can't flash new ROM and Radio because the loading blocks on 0% and then it appear error 262 and other kind of error.
Please help me!
fabionistri said:
Hi i'm fabio... Yesterday i saw a post that says to use task29 to flash new ROM.. i've used task 29 but my HD blocks himself on the initial message "smart mobility" and in bootloader mode appears this message:
BLAC100 32M
SPL-1.14.0000
MicroP-Blackstone (LED) v6
In USB mode i can't flash new ROM and Radio because the loading blocks on 0% and then it appear error 262 and other kind of error.
Please help me!
Click to expand...
Click to collapse
[TUT] Dummies guide
you need USPL or HSPL before flash...
Wajk said:
[TUT] Dummies guide
you need USPL or HSPL before flash...
Click to expand...
Click to collapse
Thanks, i explain the situation ... i bought the htc by a boys that used the phoenix so the hspl was installed, i think! so i started the task29 without installing th hardspl olinex.... what could i do? please help me..
fabionistri said:
so i started the task29 without installing th hardspl olinex.... what could i do? please help me..
Click to expand...
Click to collapse
read Task29 topic too, here is step-by-step instructions ...
As per responses above, please follow sticky guides at top of forum and post further queries within the stickies
Thread closed
p.s. Stickies are threads which are deemed useful as contains guidelines, instructions, rules etc and are stuck to positions at top of each forum so easy to find