I buy QMAT, generate and write goldcard on SD, then enter on bootloader, run romupgrade.exe, try flash custom ROM whitout HardSPL, but it's not processing, what i do wrong?
Again, GOLCARD only can bypass ur CID. not unsigned ROM image. use HardSPL to flash custom rom.
sa
ok, i can flash ship rus rom on rhodium, if on this installed wwe rom? with use goldcard?
yes. any rhodium stock rom image. why dont u just use hspl? u can revert to original spl if u want.
because i have 2 Rhodium, HardSPl i can do only once, hard spl send some info on server, i install proxifier, change IP, change MAC, but they say what i do hSPL once and for next time must pay...
Contact cmonex in pm.. and give your imei, he will surely let you install hspl for free on a second phone.
re
tnx, do this now...
Related
Hello,
i flashed my trinity with "AX3L_WM6_WWE_v3.0.7" rom, and then I flashed by my own backup rom from Orange Slovakia, but SPL in bootloader is still "SPL-9.99.CP", how i can change it to my original "SPL-1.07.0000 " for warranty?
Can I again cook my own rom version, but in rom cooker i add some spl nb file with proper version? Where i can find this file?
Thanks all for information
to flash back, you will need to extract the spl from the official rom upgrade from your phone using nbh tools or something...
you could reflash the official rom upgrade without manually entering bootloader, also... crash proof spl doesn't protect itself against being overwritten..
Hey Guys,
sorry, I´m searching the whole time after how to flash just an spl, for an extracting I used the NBH util.
My plan:
1) I want to flash my O2 branded Diamond, without flashing a hardSPL.
2) As I understood, it´s possible just to extract an SPL from the newest HTC rom, and flashing this with DiamondCustomRUU in the first step.
3) After this I should have the possibility to flash a full HTC Rom?
Are there any misunderstandings? because I can´t flash the extracted SPL with DiamondCustomRUU.exe.
What did I wrong, and what should I do?
Cheers, Chris
No one any idea???????????????????????
it might be possible to do this!
but you have to be careful not to get device ID/version different on both the OS or the SPL!
but why not just put hard spl and then revert back to stock SPL when you want to at a later stage! all versions of the stock SPL are availble on the rom developement forum
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
tehCORE said:
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
Click to expand...
Click to collapse
softspl aka sspl is only used for flashing spl's. You can't flash a rom using a sspl. Why do you think the Hardspl is created???????
thought
sspl -> temp fix
hspl -> perm fix
With the softspl you flash the hard spl and then you flash a rom with it
tehCORE said:
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
Click to expand...
Click to collapse
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
cmonex said:
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
Click to expand...
Click to collapse
oh did not know that, thanks for the enlightenment
My brother bought for me X1 from Leipzig Germany its factory unlocked and has no branding. But it has windows in German.
My question is can I flash english rom vithout any spl unlocking?
and if yes please give me link which english wwe rom can flashed to my device.
I have experience with Elfin and Elfin was bought from china has chinese wm so I used wwe elfin rom and directly without unlocking it flashed.
So is there any chance that I can have englisj X1 rom original not cooked that can drieclty flash to my device?
You will need to flash HardSPL for X1 first (it's sticky on this forum), then you can flash UK rom. Remember that German version of X1 have qwertz keyboard, so if you will flash UK rom then some keys will have another function then they show.
But after that hardspl when I will change to UK can I go directly SEUS to recoknized my phone as UK phone and update via website? So if somebody have experience flashed German rom to UK generic and after that tested SEUS service please share here the results.
Can somebody give me link for UK Generic non customized rom I found on forum but it says at then begingn of link Customized UK I need original genereic UK rom please help me to find also if you tell me how to dump my rom I can dume German Generic rom for share with forum
When you've done HARDSPL you can use the SE update service
Thannks for info Fards
One more question I have conected with SPL things.
I have experience workign with HTC TOUCH XL USPL tool and flashed lot of roms with that tool but in HTC any time you need to flash another rom you should use USPL tool and then at some stage start RUU and flash your rom.
also if you stack in bootloader or in other stage you can always recover your phone using RUU and your device default rom.
Is this possible in X1?
Lets say I have German Genereic rom deivce I want to flash to UK rom direclty without any SPL tools and stucked in some stage with error. Can I use Kovski RUU and German Genereic rom (which is the my device's defalut rom) and recover from that stage?
Thanks in advance
ITMASTER said:
Thannks for info Fards
One more question I have conected with SPL things.
I have experience workign with HTC TOUCH XL USPL tool and flashed lot of roms with that tool but in HTC any time you need to flash another rom you should use USPL tool and then at some stage start RUU and flash your rom.
also if you stack in bootloader or in other stage you can always recover your phone using RUU and your device default rom.
Is this possible in X1?
Lets say I have German Genereic rom deivce I want to flash to UK rom direclty without any SPL tools and stucked in some stage with error. Can I use Kovski RUU and German Genereic rom (which is the my device's defalut rom) and recover from that stage?
Thanks in advance
Click to expand...
Click to collapse
You should be able to yes, obviously make sure you've done hardspl before going to the UK rom.
The SEUS uses RUU to flash the rom.
If you have your own rom (such as stock german one) then it's much much easier to flash from the SD card. Jack did a decent walkthrough of that.. but just rename the file to KOVSimg.nbh and go into bootloader (volume down and reset at the same time).
is USPL available for the X1?? or its just the HD?
USPL is not available for Xperia... would be cool if it is made available at some point, though I've already flashed HardSPL!
Hey Guys.
I've been using the Deepshining ROM for the past lets say 8 months.
Right now I'd like to get back to the "official" one, they were called "STOCK" ones, right?
I haven't been into flashing and so on for the duration I mentioned above, so I'd appreciate any help.
Which one should I download, to get the newest official one?
How should I flash it?
Do I have to flash it using the tutorial?
Where can I download the orginal ROM?
yes make sure u use a stock rom that is nodo version and below and a bootloader which is supported under DFT RSPL/HSPL
if u flash any mango rom that have bootloaders 4.5 and above , yr device is "updated" and u cannot downgrade again.
Magpir said:
yes make sure u use a stock rom that is nodo version and below and a bootloader which is supported under DFT RSPL/HSPL
if u flash any mango rom that have bootloaders 4.5 and above , yr device is "updated" and u cannot downgrade again.
Click to expand...
Click to collapse
Just one question, if I use a custom rom and I don't like it, with the goldcard method will the phone go back to the original SPL without RSPL/HSPL?
I want to know before trying a custom rom.
faustolg said:
Just one question, if I use a custom rom and I don't like it, with the goldcard method will the phone go back to the original SPL without RSPL/HSPL?
I want to know before trying a custom rom.
Click to expand...
Click to collapse
The goldcard method allows you to downgrade the devices SPL. Which needs to be at or below 3.xxx to install RSPL/HSPL.
After the SPL is downgraded then you install RSPL/HSPL. Which allows you to install a custom rom. The custom rom is flashed by entering the device into bootloader mode then connecting it to the PC and running the RUUwrapper provided with the rom.
If you install only RSPL and flash a custom rom the RSPL is reverted back to OSPL after the flash process. So then to flash a different/new rom you have to re-RSPL the device and then flash the rom.
If you install HSPL then you just have to put the device into bootloader mode and flash the new rom.
HSPL is much easier and can be reverted back to OSPL by installing a stock/shipped rom.