Related
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).
sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.
many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel
is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?
You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).
i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
ur OS is wrong if ur running wm6...
2.18 is Crossbow Reloaded... or Faria's..
Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol
Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!
Sorry for Offtopic but, i cant install official wm5 rom cause.
The ruu with wm5 doesnt work> connection error
The .nkb doesnt work with ruu mun> file read error
What to do???
LOLOLOLOL
Are you sure it is .nkb? Wizard doesn't use that kind of ROM...
What?? Of course he uses. I extracted the RUU and rom file from .exe instaler.
What could i do? I tried also flash it with softspl and i didnt work.
Well,which rom you are trying to flash and which rom is at present running on the phone,plz be specific ?This problem usually occurs when trying to flash a rom in a language different then already present on the phone.Are you running a Russian or some other language OS on the phone and trying to flash with a rom in some other language ?
zabardast_1 said:
Well,which rom you are trying to flash and which rom is at present running on the phone,plz be specific ?This problem usually occurs when trying to flash a rom in a language different then already present on the phone.Are you running a Russian or some other language OS on the phone and trying to flash with a rom in some other language ?
Click to expand...
Click to collapse
I have T mobile mda vario g4 and i want to install official wizard wm5 rom in german language. And i cant.
No i am running wm6.1 with english language. I had never, after the hardspl, problem with flashing g4 roms. Everithing worked perfect with muunˇs RUU.
I have english rom( all instaled roms were anglish) and i want to downgrade to official wm5 german rom. And tzhen upgrade to another wm6 or wm6.1 rom.
Why i cant??
Sorry. U are right. The rom file is. nbf , and yeah the official rom is like that.
If i try to flash it with ruu in official pack - i cant cause wrong update tool ( no connection)
And if i want to flash this official rom with munn ruu - file read error( something wrong with .nbf file)
sry, double post
and thanks for helping me out
Ok,I got your point. You are at present on wm6.1 latest custom build rom in english and you want to go back to your phones official wm5 rom,ok ?
Right,well,as you have done 'HardSPL' your phone and its IPL/SPL is patched to IPl 2.21.0001 and SPL 2.21.olip,right ?
ok,now as you have patched to ipl 2.21.0001 & spl 2.21 olip through 'HardSPL',its not possible to revert back to official rom,untill you remove the 'HardSPL' from your phone and flash the original/official IPL/SPL of your phones carrier Rom bootloaders.After only removing HardSPL and getting the official ipl/spl,it'll will be possible to flash the official wm5 rom,ok
Now,how to remove 'HardSPL', read and follow the method as instructed in the 'Sticky' in the G4 forum by dharvey "How To: Remove HardSPL"
Well,then again,if you want to upgrade to another wm6 rom,you'll have to either again use 'HardSPL' or 'SoftSPL',but,if at all,you want to flash with another wm6 rom,then why first downgrade to wm5,why not straight away flash the rom while with HardSPL still on the phone ?
Cheers!
Yeah, everything is soo as u wrote.
you: why not straight away flash the rom while with HardSPL still on the phone ?
I have very strange problem with wm6.1 rom that i would like to use, until the new paradox rom will come out. i will try it for sure.
U can read about problem in wm6 subforum in windows Mobile 6.1 slim editon thread.
So do i have any option unless to remove hardspl?
u are the king , i wouldn come in weeks to the "please remove hardspl, " solution. hahahaha thanks again
Ok, thanks
well,if you got a problem with the wm 6.1 slim,then just flash another wm6.1 latest rom e.g by 'it's right' 'TNT 19199 series Professional Rom' as I have personally used it and found it to be an excellent rom,without removing HardSPL and reverting back to official wm5 rom.Just give it a try,I'm pretty sure you'll like it and may sove all your problem,as it'll replace all the rom files of the previous wm6.1 slim rom.
Cheers!
Tooo late. hehe
To remove the hardspl u need 2 minutes. I removed it and tried to instalruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship
Again once again i get the message from ruu = error file read.
Could somebody open that rom and look for problems.
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
First one on the site.
Right now i want to flash another official rom( from remove hardspl thread http://forum.xda-developers.com/showthread.php?t=342744) and it say again file read.
What could that mean??
EDIT:
I just succesfully instaled ruu_vario_aku3.3_3822_ rom with ruu in the rom` folder. I tried also the T-Mobile MDA Official WM5 Rom (old) with his ruu and it didnt worked. Also softspl didnt work on both roms.
I need quick answer
now i flashed wm5 rom aku 3.3 and the ipl/spl changed to 3.08 . Before was 2.26 which i got with instaling ipl/spl pack.
Is that bad for g4 with ipl/spl 3.08 , is it safe to install wm6.1 roms?????
I have bought this old phone coz it costs less than other cellphones with Wi-fi. What I really need is to install or have Voip/sip in it. But browsing and searching for answers on how to put voip in it made me stumble on this forum
i've been reading these past few days and as I read on, I am learning something and also being more confused for all the terms and other stuffs.
I would appreciate if somebody could help me.
What I have is unlocked Cingular 8125 (using my own sim via a local network here in Saipan, USA) with the following:
WM5.0 OS 5.1.195 (Build 14928.2.2.0)
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.1
I checked other posts and this page and found below which are not compatible with my device:
If your IPL/SPL numbers are in the form X.xx (i.e 2.26, 1.08, etc.) you have a G3
If your IPL/SPL numbers are in the form X.xx.xxx1 (i.e. 2.26.0001), you have a G4
Click to expand...
Click to collapse
and also below:
Download the appropriate IPL/SPL based on your device and carrier.
T-Mobile MDA G4 IPL&SPL.zip
AT&T 8125 G4 IPL&SPL.zip
Vodafone Qtek 9100 G4 IPl&SPL.zip
Orange SPV M3000 G4 IPL&SPL.zip
O2 XDA Mini S G4 IPL&SPL.zip
Depending on your device and Carrier, download the appropriate Rom for your device:
T-Mobile MDA Official WM5 Rom
AT&T 8125 Official WM5 Rom
Vodafone Qtek 9100 Official WM5 Rom
Orange SPV M3000 Official WM5 Rom
O2 XDA Mini S Official WM5 Rom
Click to expand...
Click to collapse
Again, I only need to have voip/sip working so I can call my family in the PHilippines and Canada for free. But I think the ways to have it are so far from now so I would appreciate a lot of help you can give me.
By the way, I am a contract worker and dont have much money so I need to make this thing work and can't afford to pay for somebody who could do this for me.
Thank you so much.
ok,
IPL 2.25
SPL 2.25
"If your IPL/SPL numbers are in the form X.xx (i.e 2.26, 1.08, etc.) you have a G3",as your's is 2.25 it means X.xx,its a G3 device,so don't bother to read or be concerned about G4 devices,only read and follow the threads and procedures concerning G3 devices,it'll lessen the burden on your mind and make things more clear.
T-Mobile MDA G4 IPL&SPL.zip
AT&T 8125 G4 IPL&SPL.zip
Vodafone Qtek 9100 G4 IPl&SPL.zip
Orange SPV M3000 G4 IPL&SPL.zip
O2 XDA Mini S G4 IPL&SPL.zip
These are IPL/SPL (Bootloaders) for G4 phones,none of your concern.
Depending on your device and Carrier, download the appropriate Rom for your device:
T-Mobile MDA Official WM5 Rom
AT&T 8125 Official WM5 Rom
Vodafone Qtek 9100 Official WM5 Rom
Orange SPV M3000 Official WM5 Rom
O2 XDA Mini S Official WM5 Rom
All these are Official stock carrier Roms of different networks,they are all good for both G3 And G4 phones.they include IPL/SPL for both the devices.when flashed, will only flash those IPL/SPL (Bootloaders) concerning the specific device.These roms can safely be flashed equally both to G3 & G4 devices.
Ok,for setting up 'VOIP/SIP' check out this link below for instructions and appropriate setting :-
http://forum.xda-developers.com/showthread.php?t=299950
Cheers!
Thanks for your reply zabardast_1.
Noted and I will follow you in concentrating only G3 threads and procedures.
For now, my follow up question would be:
T-Mobile MDA Official WM5 Rom
AT&T 8125 Official WM5 Rom
Vodafone Qtek 9100 Official WM5 Rom
Orange SPV M3000 Official WM5 Rom
O2 XDA Mini S Official WM5 Rom
Click to expand...
Click to collapse
- if these are the official Roms, and I am using my 8125 thru a local carrier here (which is not included in the above list, although the phone is Cingular branded but unlocked), then which one should I use? The AT&T?
and....
what are the chances that my phone will be bricked if I wont be successful on doing this myself?
Karen29 said:
Thanks for your reply zabardast_1.
Noted and I will follow you in concentrating only G3 threads and procedures.
For now, my follow up question would be:
- if these are the official Roms, and I am using my 8125 thru a local carrier here (which is not included in the above list, although the phone is Cingular branded but unlocked), then which one should I use? The AT&T?
and....
what are the chances that my phone will be bricked if I wont be successful on doing this myself?
Click to expand...
Click to collapse
G3's are not that easy to get 'Bricked',its only if you flash G4 ipl/spl to a G3 phone,then there are bright chances of getting it bricked.
Secondly,all wizard phones are build by HTC with same hareware and features,regardless of vendors and cellular networks,it maybe cingular 8125,T-mobile MDA,Qtek 9100 or O2 Mini S,they all are of same build,hardware and features manufactured by HTC.You can flash any of the Roms mentioned but I wud prefer the AT&T 8125 Official WM5 Rom.The rom is the OS of the phone,it doesn't matter which local carrier you are using,its the sim of the carrier which is in use.You can easily flash a T-mobile rom on a At&TT phone or vice versa.Only the GPRS and other network settings differ from carrier to carrier.
Cheers!
I have a few more questions pls see ****
Wizard Windows Mobile 6 for newbies (I've found this here at http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies)
Intro
....
Audience
.....
Requirements
Computer with Windows XP ***Im running in Windows Vista so I will take a look at the other post. But Iknow that basically this procedure is almost the same, right?
...
Definitions
....
Procedure
....
However, before you start flashing, consider the following:
1. Is your device a G3 or G4 Wizard? If it's G4, Follow the G4 portion of the tutorial. If you follow the G3 tutorial you will effectively BRICK your phone. I'll tell you how to tell the difference between G3 and G4 below. ****my phone is G3 (as per your previous message)
2. Did you get your phone through a carrier (or is it carrier branded)? i.e. does your phone say T-Mobile or Cingular, or O2, or anything that identifies it as having come from a cell phone company? If yes, it's probably locked. As you now know, a SIM lock is different from a CID lock. We'll need to CID unlock your phone in order to flash WM6. ***** i bought it from ebay and right now, I am using SIM from a local network here so I guess it is SIM unlocked. So that means I only need to CID unlock?
3. Get the right IPL/SPL version. Most ROMs require BOTH IPL and SPL to be 2.xx. If you're at 1.xx, you need to take an additional step of flashing an official ROM. v(G3 Only step) ****my IPL/SPL is 2.25 and I need to use AT&T G3...zip, right?
4. Pick a ROM and flash it! **** AT&T or is this the WM6?
5. Enjoy your new functionality! **** I hope so.
6. Do additional stuff (install applications, change splash screens, and anything else you ask me to write about) *** I need the SIP/VOIP so my VOipcheap would work
1. Phone version (aka "Which guide do I follow if I don't want to have a brick?").....
If your IPL/SPL numbers are in the form X.xx (i.e 2.26, 1.08, etc.) you have a G3
........
2. Unlocking (CID and SIM) G3 and G4 Tutorials.
G3 ONLY!
(Credit to Dr. Puttingham for the walkthough which I used as a basis for this portion of the tutorial.)
..... Also, make sure that your phone is nearly fully charged(at least 75%), otherwise things may go loopy.***I will.
1. Download the Button ROM to your computer **** ok
2. Attach your Wizard to your computer using the USB cable. For the love of G-d, do NOT do this over bluetooth or IR. It will most likely not work, but if it does, all hell will break loose.
3. If you have ActiveSync, (****I dont. So if I download this ActiceSync, by default, there is no parnertship, right?) make sure there are no active partnerships with your device. With your device NOT plugged in, go into ActiveSync file->delete mobile device. Once you plug the device back in, cancel synchronization. Your wizard should be showing up in ActiveSync as Guest.
4. With your device connected to your computer as Guest, run the file that your downloaded. (****The Button ROM???) It's pretty much self-explanatory. Agree to everything, and let it do it's thing. It is downgrading your IPL to 1.05. You can only unlock your phone if the IPL is 1.xx, you can't do it if your IPL is 2.xx. (<- ****what do you mean by this? coz i have 2.25) Always have lots of patience. The 10 minutes to complete statement is a guide, if your computer is running at a 90% CPU load with 99% of your RAM full (which it shouldn't), expect this to take a lot longer. If it so happens that you get an error at 99%, try The Xda_MiniS_LaunchROM_v154102.exe.
5. Once the flash is done and your Wizard is rebooted, it will display an IPL of 1.xx and an SPL of 2.xx.
6. Download Lokiwiz 0.2b.
7. Use Winzip or Winrar to extract the files to any folder on your computer(it is recommended you create a folder specifically for lokiwiz), DO NOT JUST COPY THEM! There is a directory structure inside the zip file, and this will not work if that directory structure is not maintained. This had driven me nuts the first time I did it, it was giving me all kinds of "file not found" errors. ***ok?
8. Copy enablerapi.cab from your PC to anywhere on your Wizard using ActiveSync. Remember not to create a partnership (make sure you're still connected as a Guest).
9. Go to your Wizard (***while it is connected to my computer???) and use the File Explorer to find the file you just copied. Click on it and install it to the main memory ("Device", not extended memory).
10. Back on your PC, open the folder you just created when you extracted Lokiwiz and click lokiwiz.bat. Another option if you feel comfortable is to extract lokiwiz 0.2b to your C Drive and then open up command prompt type in "cd C:" without the quotes. This should take you to your C:\ drive. Type lokiwiz.bat.
11. You will see the following:
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
Unlock refers to SIM Unlock and CID unlock refers to...well. If you still don't know the difference, go back and read from the beginning.
1. Press U on your computer keyboard. lokiwiz will SIM unlock your phone and REBOOT. If it doesn't reboot, you did something wrong. Try again. The procedure may take a few minutes to complete, so if your Wizard doesn't reboot right away, don't freak out. ***do i have to do this?
2. Rerun the lokiwiz.bat file, this time pressing C. Wait for the Wizard to reboot.
3. While rebooting, keep an eye on the IPL/SPL numbers. If the IPL is 1.05, good. If they are both still 2.xx, rerun the button ROM (or the other ROM that worked for you). You won't need to re-unlock the device.It is recommended that you make sure you sucessfully flashed the button rom(or whatever rom worked for you) and your IPL is 1.05 before you SIM and CID unlock your device.
4. You have 2 options now. Once you have successfully CID unlocked your phone, you can either re-flash the Button ROM or whichever ROM you used to obtain matching 1.05 IPL/SPL(NOT REQUIRED) or continue to the next step which is to continue with the upgrade and upgrade back to IPL/SPL version 2.xx (yes, you need to downgrade then upgrade back...it's just what you have to do however time-wasteful it may seem). Everyone seems to like the T-mobile Official WM5 ROM (****I need to use the AT&T Official, right?) , so what the heck, I think you'll like it too. Flash it the same way you flashed the Button ROM (double click and go through the installation). Remember to have patience! Also, You should save the T-Mobile .exe file since you will need to flash back to that first every time you want to switch ROMs (again, no matter how time wasteful it seems, trust me, do it).
5. OPTIONAL STEP:: Once you have successfully CID unlocked your G3 device and have the T-Mobile Official WM5 ROM back on your device, you now have the option to upgrade to IPL/SPL 3.08. Upgrading to IPL/SPL 3.08 is just like flashing a tiny little ROM It will not change the functionality of the device whatsoever but will speed up the boot sequence a little. Any little bit helps right? You can Find the download link for IPL/SPL 3.08 HERE Just download the .rar file EXTRACT it to its own folder. <!-- DO NOT COPY AND PASTE THESE FILES TO ANOTHER FOLDER. There is a definite file structure that will be ruined if you copy and paste and it will not work. --> Run the Rom Update Utility (****how?) and again, follow the simple self explanatory steps to complete the upgrade and then your device will reboot itself. Keep an eye on the IPL/SPL when the device is rebooting. It should now be 3.08 for both and your device should now boot more quickly.
WM6 ROMs
Pick a WM6 ROM and flash it. Now that you have a good T-Mobile WM5 ROM with IPL/SPL at 2.26 (if one of them is not at 2.26, RE-FLASH IT!) or IPL/SPL 3.08, you're ready to install a WM6 ROM. This is where I have to step back. Due to forum politics, I cannot go ahead and suggest a ROM (neither can anyone else, and if you ask this on the forums, you will get flamed and your topic will be locked). Besides, the minute I suggest a ROM on this page, a better one will come out. All I can tell you is if you're after all the nice touch stuff (of course you are!), look at the ROMs that boast TouchFlo (TNT and ?BlackDiamond are just two examples). Go to the forum, under Wizard Mobile 6 (***I have to make sure that its AT&T, right?) and take your pick. It is like being a little kid in a candy store, the variety is so immense. The only advice I could give you from personal experience, is that ROMs with newer builds(higher build numbers) tend to have more bugs than the older builds(obviously, the builds that have lower numbers) tend to be more stable with less bugs. THIS IS NOT TRUE FOR ALL ROMS!! Some ROMs with newer builds are VERY stable with only minor bugs if any but I am not going to get into that. I would also suggest reading some of the discussion regarding the author's ROM to see what bugs there are (hint: all ROMs have bugs, the question is how many and what can you live with. A relatively minor bug for me may be a show-stopper for you). You flash this ROM the exact same way you flashed the button ROM and the T-Mobile ROM. Configure it to your liking and enjoy!
**** If this is successful, then I would go on and install voip/sip, right?
HOWA !!!
Long questionair,
Anyway ! just to a cut short,
1. WinXP is highly recommended for flashing and upgrading,with winvista,there are many problems.so I advise you to consider winXP.
2. ActiveSync 4.5 will not work on winVista,it only works on winXP,for Vista you'll have to download Windows Mobile Device (WMD).
3. YES ! its a G3 device(IPL/SPL 2.25),If its SIM unlocked,it might be CID unlocked too,its not essential,but maybe,as you bought a used phone from ebay.To verify if its CID unlocked,download the WST tool and run the "CID Action' button,it'll verify the CID locked/unlocked status of the phone.
4.If its CID unlocked,there's no need to downgrade by flashing 'Button's Rom 1.05 to 1.xx to unlock with lokiwiz02b,but if isn't cid unlocked,you'll have to downgrade it to ipl/spl 1.xx.
5. YES ! if its cid unlocked,you need ipl/spl 2.xx to upgrade to any wm6 rom,yes,you can use the official stock rom of at&tt,but T-mobile 2.26 has proved to be the most stable 2.xx rom and is highly recommended to upgrade to 2.xx for upgrade to wm6 as a good base.
6. NO ! there's no wm6 upgrade available for official stock AT&TT,you'll have to depend on latest custom build wm6 roms,which are avaiable in this forum.
Well,if you have to downgrade and CID unlock through lokiwiz02b,read and follow the guide by Dr.Putts.
Cheers!
follow-up questions ****
1. i will look for winxp
2. if i didnt find winxp pc here, i would have to do it thru vista
3. WST Tool? download it to my PC (with winxp) and connect my wizard?
4. ok. then i will follow the steps.
5. YES ! if its cid unlocked,you need ipl/spl 2.xx to upgrade to any wm6 rom,yes,you can use the official stock rom of at&tt,but T-mobile 2.26 has proved to be the most stable 2.xx rom and is highly recommended to upgrade to 2.xx for upgrade to wm6 as a good base.
(****so i dont need to upgrade coz i have 2.25??? or i still need a new official ROM like T-mobilie 2.26 so I can upgrade to wm6???)
6. NO ! there's no wm6 upgrade available for official stock AT&TT,you'll have to depend on latest custom build wm6 roms,which are avaiable in this forum.
***any wm6 will do, right?
thanks so much.
Hi there!
Im lost! I cant find a PC with WinXP that I can use
I think I will have to do it with Vista. And of course, I need to start all over again from the start on reading and learning.
Is this the right post for me? including the links to the stuffs I need to download? (coz I notice there's not much to download and not much stuffs like the button rom and the At&T rom and others).
I mean, considering that I have a G4 with IPL/SPL 2.25.
Please help.
Karen29 said:
Hi there!
Im lost! I cant find a PC with WinXP that I can use
I think I will have to do it with Vista. And of course, I need to start all over again from the start on reading and learning.
Is this the right post for me? including the links to the stuffs I need to download? (coz I notice there's not much to download and not much stuffs like the button rom and the At&T rom and others).
I mean, considering that I have a G4 with IPL/SPL 2.25.
Please help.
Click to expand...
Click to collapse
YUP ! follow the above thread and download the drivers for winvista or you can check out this below link also :-
http://www.anichillus.net/index.php?topic=21.0
well,as you say it has 2.25 then its a G3,but if its got ipl/spl 2.25.0001 thenits a G4,why don't you download and WST tool and get the device info,it'll certify which is your phone a G3 or G4,ok
Cheers!
After I go through the ROM update
The ROM update seems to work fine installs 100% the 8125 then reboots the Splash screen comes up with the beer bottle, but it HANGS on this Screen and Does not do anything should i leave it longer.
ive been working with other ROMS and now this one for the last week, and It seems like its just hanging at this Screen.
also my active sync isnt really regonizing the 8125, under explorer it shows mobile device, and the computer beeps when i plug it in but sync doesnt seem to regonize it...
it has in the past but not while loading this button rom coul that have somethign to do with it?
natdizzle said:
The ROM update seems to work fine installs 100% the 8125 then reboots the Splash screen comes up with the beer bottle, but it HANGS on this Screen and Does not do anything should i leave it longer.
ive been working with other ROMS and now this one for the last week, and It seems like its just hanging at this Screen.
also my active sync isnt really regonizing the 8125, under explorer it shows mobile device, and the computer beeps when i plug it in but sync doesnt seem to regonize it...
it has in the past but not while loading this button rom coul that have somethign to do with it?
Click to expand...
Click to collapse
Do a Soft Reset or Hard reset,it'll load up fine,if not,then reflash the button's Rom again.
Cheers!
OKay
Soft you mean the litte reset button hard you mean battery ive tried all of that...
I guess ill keep trying to reload thebutton rom you seem confident itll be lright
I HOPE I MISS MY PHONE!!
zabardast_1 said:
YUP ! follow the above thread and download the drivers for winvista or you can check out this below link also :-
http://www.anichillus.net/index.php?topic=21.0
well,as you say it has 2.25 then its a G3,but if its got ipl/spl 2.25.0001 thenits a G4,why don't you download and WST tool and get the device info,it'll certify which is your phone a G3 or G4,ok
Cheers!
Click to expand...
Click to collapse
hi there! I am trying to follow the steps (vista) but cant get to bootloader mode.
which is the side ok button? and which hole should i put my stylus (coz the holes at the bottom are only the earphone, usb and the one that you can put dangle or something)?
also, what does it really look like when its in the bootloader mode?
thanks.
pls note that there is a hole on the right side that when i press it with stylus...the device will reset.
Hi there!
Got the bootloader! I pressed the hole on the right side with the stylus and when the screen is blank, I pressed and hold camera button and there you go....the bootloader with that colorful screen.
I followed the steps and now the WMDC can see my phone.
Now what?
- need to upgrade to wm6, right? (although, i thought that the steps i followed would make my phone wm6 already)
- then, need to get the voip/sip
Now i need to know how. LOL!
Pls tell me something more about this....thanks
it works YUPEEEEEEEEE
u are not going to belive but my phone is working now........... i fix the from cingular to tmobile in the minute............ IT WORKSSSSSSSSSSSS i started with the beer bottle. then i press soft reset button on the boot screen i press camera button and then i got three color screen .after that i plug my USB cord and computer did a beep so my usb was conected..
i went and download the tmobile flash and then unziped on my desktop in the new folder.
did restart on my computer and then run the lockwiz ....... i did update my sistem.. when is booting it say cingular but im using my tmobile sim card..........
HTC 8125
OMAP850
195 mhz
ram sz 64 mb
flash size 128
flashchip m-SYSTEMS
i got version
2.25.11.1wwe
rom date 5/11/06/
something must me wrong with mine..im doing everything have the beer loading screen IPL 1.05 SPL 2.25 Nothing...freezes on splash....
trying the unlocking tools, but i cant get past splash, or RGB screen soo i dont know if it will work from there...
natdizzle said:
something must me wrong with mine..im doing everything have the beer loading screen IPL 1.05 SPL 2.25 Nothing...freezes on splash....
trying the unlocking tools, but i cant get past splash, or RGB screen soo i dont know if it will work from there...
Click to expand...
Click to collapse
Relax,try a Soft Reset or Hard reset,if it works,fine,if not get into bootloaders and flash the Button's Rom again.
Cheers!
me, i dont really know what to do next.
Zabardast, pls guide me. After wat i did above, what will i do now?
Thanks.
zabardast_1 said:
YUP ! follow the above thread and download the drivers for winvista or you can check out this below link also :-
http://www.anichillus.net/index.php?topic=21.0
well,as you say it has 2.25 then its a G3,but if its got ipl/spl 2.25.0001 thenits a G4,why don't you download and WST tool and get the device info,it'll certify which is your phone a G3 or G4,ok
Cheers!
Click to expand...
Click to collapse
I followed that but I get lost. I thought everythng would be ok. but my phone is still wm5.
pls help. thanks.
by the way, what is that latest RUU.zip?
!!! USE THIS GUIDE ONLY IF YOU KNOW WHAT YOU ARE DOING !!!
!! READ THE END OF THE GUIDE FIRST(Very Importnat)
Aplication Unlock - lets you run unsigned software
SSPL - Software Second Program Loader is a boot loader after IPL (Initial Program Loader) often seen on smart phones and PDA:s.
- Lets you flash any rom on the phone
SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
[B]official HTC ROMS[/B]
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
UNLOCK TOOLS
http://rapidshare.com/files/105133496/Unlock_HTC.rar.html
1. Folder "1"
put the file "SP_AllowCertificateInstall.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
2.Folder "2"
make sure you are connected to the phone threw active sync. Now run "EnableRAPI.bat" it will say if
it has succeded.
3.Folder "3"
make sure you are connected to your mobile phone through active sync. Start "MobileRegisteryEditor.exe"
Now go to SPV_C600 than HKEY_LOCAL_MACHINE than Security than Policies than Policies
so that you are in HKEY_LOCAL_MACHINE\Security\Policies\Policies
Now dubble click 00001001 (the first one after (Default)) and change the value to 1
Now dubble click 00001005 (the second one after (Default)) and change the value to 40
4.Folder "4"
put the file "Cert.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
5.Folder "5"
install and run HTC Security Manager.msi
select Security Off
Wait
YOUR PHONE IS APPLICATION UNLOCKED
6. Restart the phone
press and hold CAMERA+POWER while powering
you should see spl version
NOTE THAT VERSION
PULL OUT THE BATTERY AND POWER THE PHONE
7.1 Try to flash wwe rom directy
if you have wwe use sspl 1.01 http://forum.xda-developers.com/attachment.php?attachmentid=38680&d=1178637546
WWE rom
http://rapidshare.com/files/106091341/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
now you have SPL 1.10 and CID HTC__Z12
jump to step 8
7.2 If 7.1 does not work try
7.2.1.SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
now you have SPL 1.10 and CID HTC__A07
7.2.2.you need to run the RUS update
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
jump to step 8
8.flash any rom
now to flash an rom use SSPL 77.7 http://rapidshare.com/files/106072098/SSPL.rar.html
Copy the coresponding SSPL to the ROOT of the PHONE not the SD-CARD
run SSPL on the phone and immediatly press CAMERA+POWER
YOU SHOULD SEE TRI-COLOR SCREEN displaying spl 77.7
This SPL is allowing you to flash latest radio
or to Flash any rom usin sspl 77.7
Run the update from the PC
VERY IMPORTANT
i found a way to installl hardspl
1. unplug phone from usb
2. take out the battery/put it back
3. enter bootloader (press camera+power)
4. check for spl if it sais 2.05 you can go further if not read the fisrt guide
5. enter in windows
6. extract and copy to device root http://rapidshare.com/files/138396463/breeze_HARDSPL.rar.html
7. copy to storage card root BREEIMG.NBH
8. it should say SPL-1.01
9. follow onscreen instruction for the update
10.enter in windows and delete BREEIMG.NBH from card
11.enter bootloader (press camera+power)
12.it should say spl 7.77
13.be happy now you have hardspl and you can flash any rom (without sspl)
BEST REGARDS
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using SDA security unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Please bear with me, because i really do not want to brick my phone.
Admin, please make this thread sticky. cheers
alexnvidia said:
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using XDA unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Admin, please make this thread sticky. cheers
Click to expand...
Click to collapse
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
jerpelea said:
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
Click to expand...
Click to collapse
im going to flash to WWE now with this version : HTC MUI BREE100 1.34.251.1 1.38.00.10 32.71.7020.12H 15673.3.3.1 3.3.1 2.002 1.10.0000 , then update to your WM6.1.
am i doing the steps right?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen close blank and nothing happens even though im still pressing the camera+power button. what should i do now?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen goes blank and nothing happens even though im still pressing the camera+power button. i had to unplug the battery to restart the device. am i doing anything wrong here?
Update : Now i got it. i had to run the SPL link, not the SSPL.exe as written in the first post. must be a typo.
Update2 : Success!! flashed to WWE. now proceeding to your WM6.1!!
Update3 : Running WM6.1 B1 now! thanks jerpelea! you're the man!
Admins please make this thread sticky.
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
caglar_altan said:
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
Click to expand...
Click to collapse
all roms work
follow the guide and will work
rom
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
caglar_altan said:
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
Click to expand...
Click to collapse
Hi, I had the same issue. Try pressing camera & off' buttons AND Enter all together.
rom update
1- I have updated the current rom to origininal config by manufacturer's original ROM.
2- I applied HTC unlock tool..
3- My first attempt to update rom gave #262 error. Second attempt was succesful.
thanks.
futureshock said:
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
Click to expand...
Click to collapse
there are 5 keys unless you have the official security configuration manager
that is setting the other keys for you
BR
HARDSPL
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
jerpelea said:
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
Click to expand...
Click to collapse
That sounds interesting..!
alexnvidia said:
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
Click to expand...
Click to collapse
no
you must get to windows
what is your current cid?
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
alexnvidia said:
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
Click to expand...
Click to collapse
you can not do anithing
your ipl does not know how to load spl1.09
send the phone to repair and flash hardspl when it returns
there are many people with your problem
till now we have found not found any solution
BR
my phone is out of warranty, so sending for repair will cost me a lot. we'lll keep our fingers crossed and hope you guys can find a solution for us soon. thank you
i think, SPL version is very confusing. 2.05 is older than 1.09?
Would be good to have compatibility list between SPL and IPL versions to not mess and brick device.
I guess i was lucky, because i updated my breeze to resently posted HardSPL (thanks to jerpelea) and device still alive.
I found that RUUUpdateUt.exe i've used for DES SoftSPL is not working with HardSPL anymore. It cost me a bunch of my nerves (no body mentioned this fact!). Again luckily i found that stock RUU upgrade utility works fine with HardSPL (i just removed all dialogs except first for convenient use).
Well, at last, now i don't need to flash stock firmware (with radio ROM update which is extremely dangerous) every time when one of my cooked ROM refuses to work normally.