Hey, RUU works fine, but then it gives me a 262 error and it leaves me xperia at a bar with 0% next to it.
How can I fix this?
Edit: Nevermind.
I was trying to do it on Windows 7 but IT DOES NOT WORK.
Use XP instead.
badboy70 said:
Hey, RUU works fine, but then it gives me a 262 error and it leaves me xperia at a bar with 0% next to it.
How can I fix this?
Edit: Nevermind.
I was trying to do it on Windows 7 but IT DOES NOT WORK.
Use XP instead.
Click to expand...
Click to collapse
have installed winmo center on ur win7?
WMDC 6.1 here: http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
or better yet use the CD that came with your Xperia
Related
Hello! I talked to xplode about this and he had no clue what could it be...
soul_train said:
...When I run Device Software Update Utility I go to next. It finishes with updating info I go to next. And then it says "This ROM update does not design for your device, please get a proper ROM upgrade and thry again...
Click to expand...
Click to collapse
-------------
xplode said:
Strange, works fine here, try to repeat the procedure afterall you upgrade with noid, it is not likely to get error like this
Click to expand...
Click to collapse
Don't know where is the problem. I have Helmis 1.4 3.5AKU... I have thryed both new WM-s and On both I get the same problem. So if anyone knows help would be appreciated. Thanks!
Soul Train
I got the same error message. I tried to change operater, but that didn't do the trick, so I'm still on the case
Edit: I'm normaly using Windows Vista, but I still have my XP installation, so I tried to boot in XP an run the upgrade from there. This worked fine, so mayby it's a problem with Vista althroug it should work. So my best advice is to try reboot you system, i know it's not alot of people who runs dual boot systems as standart
hagsted said:
I got the same error message. I tried to change operater, but that didn't do the trick, so I'm still on the case
Click to expand...
Click to collapse
What WM do you have? Shoud I try to Revert back to Wm2003 and try like that?
I upgraded from Helmi's Aku 3.2 to Xplore's 3.5 R4. If you have the posibility, try to connect your BA to anothor PC and run the update from there, I think it's a problem caused by Windows on the specific pc.
Okay I can't seem to update or do anything with RUU's... It keeps crashing and re-setting my phone to the colored screen. I followed the directions to a T with updating ROM's/CID/SIM unlock and still I get errors... It all works fine and dandy until the phone restarts to the colored screen. Once that happens the RUU shuts down with an error. I tried to restart it while the phone was in color mode and all the RUU did was shut down with an error again... Anyone have an answer to this??? Please!!!! HELP ME!!!
If it helps I'm running windows Vista Premium and the latest mobile center.
djgrafitti said:
Okay I can't seem to update or do anything with RUU's... It keeps crashing and re-setting my phone to the colored screen. I followed the directions to a T with updating ROM's/CID/SIM unlock and still I get errors... It all works fine and dandy until the phone restarts to the colored screen. Once that happens the RUU shuts down with an error. I tried to restart it while the phone was in color mode and all the RUU did was shut down with an error again... Anyone have an answer to this??? Please!!!! HELP ME!!!
If it helps I'm running windows Vista Premium and the latest mobile center.
Click to expand...
Click to collapse
Search the forums. You can't update using the updater under Vista without tweaking. Your best bet is to use Shelltools.
Shell Tools doesn't work either... all it does is freeze up... for 1hr... So i gave up on that tool..
If you check in the Windows Mobile 6 thread for the TNT 3.0 Series ROM, you'll find that his package includes a Vista utility. Hope this helps - the ROM has also been getting good feedback as a WM6 upgrade.
Hello, i use vista and just flashed from olix to the original. And now is the new problem, when i try to install uspl from my vista laptop i get this error :
HTC Blackstone USPL version 2.5, Apr 5 2009
Opening USB port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6
d-b54c2b4fc835}...
WARNING: Port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6d-b
54c2b4fc835} parameters could not be set
WARNING: Port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6d-b
54c2b4fc835} timeouts could not be set
ERROR: No response from device
HTCSBye!>.L.HTCE
Bootloader on USB on my phone
im happy if someone could help me with this problem
Are you Vista x64 or Vista x86? Either way check the information on step (0) of the guide in my signature. You need to update the driver for your HTC USB Sync.
Hello. Verry good guide im running vista 32 bit and try to install driver, but windows said the driver is good HTC Driver, ive install a vista driver from this forum a few monthes ago. It look like the usb driver is working because i use this vista laptop to flash roms.
das-kvant said:
Hello. Verry good guide im running vista 32 bit and try to install driver, but windows said the driver is good HTC Driver, ive install a vista driver from this forum a few monthes ago. It look like the usb driver is working because i use this vista laptop to flash roms.
Click to expand...
Click to collapse
Ahh, ok. Do you have antivirus running? It can also interfere with USPL. If so, try disabling it temporarily and try again...
No problem in Vista 32-bit (many times), if you use this guide : http://www.modaco.com/content/windows-mobile-news/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/
It`s from Duttys guide.
you need to revert to the old drivers even if vista tells you that you have a good driver
I did everything that is possible and on Vista x64 I can't make it work! BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
OrionBG said:
BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
Click to expand...
Click to collapse
You can just disable this "feature", google for it.
OrionBG said:
I did everything that is possible and on Vista x64 I can't make it work! BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
Click to expand...
Click to collapse
This is true. You can get around this by following step (0a) of the guide in my signature.
malson said:
No problem in Vista 32-bit (many times), if you use this guide : http://www.modaco.com/content/windows-mobile-news/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/
It`s from Duttys guide.
Click to expand...
Click to collapse
where can i get the 64-bit drivers?
Thanks!
edit: found it in the guide from cRaCKwHoRe
edit2: with vista 64bit the uspl-window disappears immediately if i start blac_uspl.exe (v2.4). i've updated the usb drivers
Nersta said:
where can i get the 64-bit drivers?
Thanks!
edit: found it in the guide from cRaCKwHoRe
edit2: with vista 64bit the uspl-window disappears immediately if i start blac_uspl.exe (v2.4). i've updated the usb drivers
Click to expand...
Click to collapse
Run it from a command prompt window instead so you can see the error text before it disappears
if i run it from the command prompt i got exactely the same error like the threatauthor. then i tried some things and now it works! i don't know what i ve done
thanks a lot for the help
btw, very good guide!
i also got the error message "no response from device"
i have the old driver (from 2009) installed.
also vista, but 32bit
anybode can help?
I have actually followed the guidance on modaco earlier and have successfully installed cooked ROM on my HD using USPL, but after upgrading to 1.56 now when I try to follow the guide and install the driver an error msg comes up saying "Windows has encountered a problem" and the driver does not get installed. I have no idea why it is not working as I know that I have done everything right, and btw I have 32 bit vista. Can anybody help? For the time being using HSPL, but would like to have stock SPL instead.
Try to change the USP port where you phone is connected. Just connect the cable to other port. This helped me once.
try this:
in your command prompt window (which you have set to run as administrator), navigate to where the exe is.
then type blac_uspl.exe (i think thats what its called) BUT DONT HIT ENTER
then, put the usb cable into your touch hd. as soon as it says USB in bootloader mode, hit enter and it ought to work then, provided you do it quick enough.
this worked for me when i had the same issue.
weird.
i tried to flash it about 15 times. 10 times this erroer message. then i was able to install uspl! wow.. but the flash-process stopped at 0%.
so i tried again and again and then it ahppened. i flashed that stupid rom
i didnt chance anything. i just did the same as before. so i dondst know what the exact problem was.
but ok. wating for the next rom which i wanna flash
thanks for your help!
Hello everyone!
Im really desperate because I cant flash my Jade with ironeagle´s "1.40.488.2.lean.cut.NO.manila2D" ROM.
If I run customRUU it makes an connection with my phone and a status bar appears staying at 0% for a while. Then I get a error message "uptade error 262 "
After removing the battery everything works fine again but nothing is flashed :S
I´ve been told to use Jade-Hard-SPL_V3 but for some reason nothing happends... If I run the app my phone gives me a error message saying "installing of enablerapi.cab failed".
Is anybody able to help me please?
Thanks in advanche!
Sercio
well, i had the same problem try to hardspl under windows vista. try to update it with windows xp ... for me, it worked perfectly
Thanks for the reply... I actually have Windows XP professional Edition :S
Ok so i follow the instruction, which is quit simple really. At the progress windows where it shows the % of the something something, its only at 0% for several minutes. Then a new window appears with some error message and i click ''recovery''. I follow screen instruction then my X1 works fine. I tried to hardspl fer several times and i follow everything, but still the same result. Does any body know how to solve this? i used rom updateutility. thanks
Hi,
Everything you need to know is in this thread: http://forum.xda-developers.com/showthread.php?t=431218
If you have a problem, post it there.
-Oobly
Nurra said:
Ok so i follow the instruction, which is quit simple really. At the progress windows where it shows the % of the something something, its only at 0% for several minutes. Then a new window appears with some error message and i click ''recovery''. I follow screen instruction then my X1 works fine. I tried to hardspl fer several times and i follow everything, but still the same result. Does any body know how to solve this? i used rom updateutility. thanks
Click to expand...
Click to collapse
are you using windows 7 or an 64-bit system?
I have Windows 7 x64 and i had that problem also, after restarting and entering unsigned driver mode, and installed an other driver it worked.
Aerox912 said:
are you using windows 7 or an 64-bit system?
I have Windows 7 x64 and i had that problem also, after restarting and entering unsigned driver mode, and installed an other driver it worked.
Click to expand...
Click to collapse
Yes im using windows 7. Can u explain to me what is this ''entering unsigned driver mode''? Im sorry ive never heard this before. thanks
Ah stupid me, why did i ask u about unsigned driver so fast! should've google a bit. Ive downloaded and installed it. Ill post here if this works or not.