Database Develop

S2U2 fullscreen caller photo problem

Hi all, does anyone know how to fix the problem that when there is an incoming call, the S2U2 brings out a very low res, atually just an enlarged version of the small thumbnail, rather than the full hi-res (240x320px) image of the person calling?
also how do i totally disable S2U2 ?
thanks in advance

If you read the F.A.Q for S2U2 you would have found your answer.
Just use S2V to assign pictures for your contacts. Only downfall about that is it won't sync to Outlook. If you want to disable S2U2, you can disable that in settings and keep the caller id function.

phouki said:
If you read the F.A.Q for S2U2 you would have found your answer.
Just use S2V to assign pictures for your contacts. Only downfall about that is it won't sync to Outlook. If you want to disable S2U2, you can disable that in settings and keep the caller id function.
Click to expand...
Click to collapse
Heres a cab
Enjoy

by any chance could any one provide the latest version of the s2u2 cab

ChInEsE ChIcKeN said:
by any chance could any one provide the latest version of the s2u2 cab
Click to expand...
Click to collapse
there u go. try a search next time.

thank you so much
does this version have problems like the previous versions?

ChInEsE ChIcKeN said:
thank you so much
does this version have problems like the previous versions?
Click to expand...
Click to collapse
I don't know what "problems" your referring to, but I'm using this with S2U2 for fullscreen caller display and it's working perfectly.
try it, if you dont like it , uninstall...

i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?

Thanks i'll give it a try

S2U2 is now at v1.00
http://forum.xda-developers.com/showthread.php?t=381588
Download this version.

S2U2 Caller ID
ChInEsE ChIcKeN said:
i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?
Click to expand...
Click to collapse
1. Check out the threads on S2U2.
2. Crop/edit your photos to the right size.
3. Use S2V to add your new photos to contacts.

ChInEsE ChIcKeN said:
i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?
Click to expand...
Click to collapse
Chicken,
I believe I am experiencing the same problem. When I get a call, the S2U2 caller ID comes up and then the standard Windows Mobile ID comes up and overlays it. Is there anyway to stop the windows mobile ID?
I am on WM6.1 on a HTC Touch. I am running S2U2 V2.10 by A_C
Thanks in advance.

help with popup

is anyone able to tell me how to disable the connectivity popup on my tytn2? i have large title bar installed and everytime i try to select volume etc the large title bar is over ridden by this screen. see screenshot for better description.
thanks in advance

lindsaydr said:
is anyone able to tell me how to disable the connectivity popup on my tytn2? i have large title bar installed and everytime i try to select volume etc the large title bar is over ridden by this screen. see screenshot for better description.
thanks in advance
Click to expand...
Click to collapse
I think (don't quote me ok?) that what you want is START>SETTINGS>PERSONAL TAB>SOUNDS AND NOTIFICATIONS>NOTIFICATIONS TAB and use the pull down to message connect (connection established) (and any others that are annoying you) and uncheck "Display message on screen"
Let me know if that does not do what you want and I can do some more research.
Bill

thanks for the reply but there doesnt seem to be one that stops this popup. on the new diamond ROMS there is an option in the touch flo settings but my rom is based on TNT's 6.1 rom which i have cooked in my own program preferences.

lindsaydr said:
thanks for the reply but there doesnt seem to be one that stops this popup. on the new diamond ROMS there is an option in the touch flo settings but my rom is based on TNT's 6.1 rom which i have cooked in my own program preferences.
Click to expand...
Click to collapse
On my system - I have V3.5Death installed currently - I can do the pulldown and on the connection established I can uncheck the display message option and I no longer have that display - actually - on the V3.5 DEath ROM I believe that this is set as the default - (I REALLY like the defaults on this guys ROM as they are VERY close to what I had mine set at before I install it.
Sorry that does not work - I would have been surprised if it did because I knew that you cooked ROMs yourself and that is higher on the learning curve than I currently am myself.
Good luck!
Bill

As you are using a cooked (and ported) Rom you need to ask your question in the thread for that Rom.
The answer provided works for WM 5.0 - 6.1 Rom that I've ever used.

Microsoft Voice Command V1.6.19971

I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?

alanplum said:
I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
Click to expand...
Click to collapse
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though

pfcsabre said:
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
Click to expand...
Click to collapse
We removed the MSVC cab because it is a retail sold program, YES it was put into some official ROMs but after a LONG debate we decided to not allow it in cooked ROMs etc... just such a grey area we didnt want M$ finding another reason to have a go at xda-devs.

i had a feeling it will be taken out eventually, curiously though i was thinking why the guy was banned

MS Voice Command 1.6 German
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!

mr.right67 said:
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
Click to expand...
Click to collapse
Have you read post #3? MSVC is a retail sold program, if you want it please buy it.

Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...

Does MSVC integrate and work with the fuze over bluetooth? I know that it needed several mods to work with both the 8525 and the Tilt.
Thanks

it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again

omaralt said:
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
Click to expand...
Click to collapse
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?

jglev said:
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
Click to expand...
Click to collapse
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)

ITNV said:
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
Click to expand...
Click to collapse
Yes. I wish it were that easy. As I said, all parameters are set up exactly like my Tilt which worked perfectly. With the Fuze, I only get my ringtone. Now, I know that the Fuze has a newer version of VC, so I may try to downgrade to the version that is on my Tilt.

omaralt said:
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Click to expand...
Click to collapse
I'm wondering the same thing. Stock Fuze had MSVC, and I flashed to the Elite ROM, and would like MSVC back. Is there any way to flash my Fuze back to stock rom, and pull the cab file out of it??

Unless you can tell me otherwise, the one that comes with the FUZE is defective. Partly... A few of us can't get it to say the incoming caller name or number. All you hear is a bell sound. I've gotten everything else to work like dialing from the headset, even where it says I have an appointment on my BT headset. Just for the announcement of whos calling doesnt work.

Do you have to have the handsset connect to juse VOice C`?

I pulled VC 1.6.19971 out of the AT&T Fuze ROM and included it in my personal ROM and I was able to enable "Announce incoming calls".
On my Nokia BH-501 headset, it begins to announce the call, but gets cut off by the built in headset ringtone. (I only use this stereo headset for music)
On my Oakley Razrwire it works just fine. With 'announce' turned off, the headset uses it's normal built-in ringtone. With 'announce' turned on, I get the VM announcement with my WM ringtone playing in the background (it opens an audio stream from the phone). I use this headset while driving, so it's all good.

Well well... depends on your MSVC-version. 1.6.4622 DOES NOT announce any incoming call regardless of the setting.
1.6.17913 does, 19209, 19213, 19214 does...
By the way: the ultimate FAQ was named The Definitive Guide for Microsoft Voice Command - I posted a backup in another thread.
anyhow, does anyone know the advantages of 1.6.19971 ? Does it report anonymous callers correctly (which none of the above does?)
And why is it that anyone wants to use newer versions without even knowing changes? Maybe it's a beta version, maybe it's buggy... but it's a newer release... using legal german retail (bought it) .4622 with 19209 exe for announcing reasons. Works brilliant on raphael.
But maybe someone knows a list of changes or fixes, advantages or disadvantages in 19971?

I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me

irus said:
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
Click to expand...
Click to collapse
Before or after installing cyberon? - After: Unpairing headset, repair and watch out having it set as default handsfree headset
HTH

MSVC in Dutch?
Hello all:
Is MSVC available in the Dutch language? Its kind of weird hearing my Dutch contacts' names pronounced in English. Funny, but still weird...

Raphael Caller ID for Kaiser

Hi,
i´m looking for this Caller Id from Raphael, or advice how can i disable opal caller Id "with sliders" from hyperdragon III blackstone

killerGBU said:
Hi,
i´m looking for this Caller Id from Raphael, or advice how can i disable opal caller Id "with sliders" from hyperdragon III blackstone
Click to expand...
Click to collapse
I think this might give you what you want. Not sure if it will intall over that you have now. I used it once , but I prefer the slide to answer. It keep me from accently hitting the hang up button when holding the phone to my face or answer while phone is in it's case, or me grabbing it, before I can see who's calling.
Try this, hope it's what you're after:

thx,
i helped, bud i dont see color and mute button. It doesnt matter, i´m glad that hw keys is now working.

Sorry, I don't remember the exact detail of the dailer.
Keep an eye on it. On my ROM this (maybe, don't recall specificaly) and the opal dailer start out working but soon after break.
Hope you find what you looking for.

I've tried installing this cab on my HTC 6.1 ROM, but it only changes the startup pin screen and nothing else. Any other versions that will work on a standard ROM to get the call id screen like above?

[REQ] Vibrate on Answer

Rapheal/Fuze
Just moved to DA_G clean rom (wm 6.5), my favorite feature of the last iteration of my phone was that it vibrated when someone answered on an outgoing call.
Can someone please assist me with enabling the "vibrate on answer" feature of my phone using the stock windows dialer that comes with the phone or assist me in switching to a new dialer?
Here are the relevant posts:
http://forum.xda-developers.com/archive/index.php/t-499584.html
From the xperia: http://forum.xda-developers.com/archive/index.php/t-478654.html
From the android: http://forum.xda-developers.com/showthread.php?t=539752

go to settings-personal-phone
once there, go to the last tab "advanced" and checl "VIBRATE DEVICE WHEN CONNECTION IS ESTABLISHED"
does that work?

i think my Fuze does this. It is a neat feature.

kamikaze458 said:
go to settings-personal-phone
once there, go to the last tab "advanced" and checl "VIBRATE DEVICE WHEN CONNECTION IS ESTABLISHED"
does that work?
Click to expand...
Click to collapse
Because I am using the stock dialer I do not have an advanced tab.

What ROM are you using? I'm surprised you don't have that tab... I'm not using the stock ROM but I thought it was there with it and is in other ROMs I have used.