My Landscape stopped working?? - XPERIA X1 ROM Development

My Landscape stopped working?? - XPERIA X1 ROM Development

Sorry, I already posted this in the other board but no one seemed to be able to help me over there so I thought that maybe someone here would be able to help me out. so my problem is that when I slide out the keyboard to type something in, it won't actually rotate the screen. It isn't an issue with the ROM because I have flashed several different ones and it is the same no matter what.
What happens is that I slide out the keyboard, the screen freezes to whatever it was when I slid it out. I type whatever and when I close the phone it just loads up the text that I had typed in. So the keyboard itself works but I can't see what I typed until I close the phone again which is pretty inconvenient. Does anyone know of a way I can solve this? PLEEEAASSSE! help is much appreciated.

Sounds like a hardware problem...

So thats why u were selling it. rofl

yeah, i would if i could. but who would buy it if the screen freezes when pulling out the keyboard

well couldn't you get it repaired under warrenty, if your still in warrenty o' course

Related

Huge problem!!!

I recieved my tilt from Amazon roughly aweek ago. Everything was going fine up until not to long ago. The screen stopped registering any screen taps from the stylus or my finger while everything else worked just fine. I reset the unit a few times hoping to resolve the issue. Nothing. THEN I made the big mistake of hard resetting the unit. Now i get to the calibration screen and no further. Anyone got any ideas? Any idea where I can take this to get looked at? i was contemplating sending it to Amazon as defective but ive already flashed the HTC Rom to it shortly after recieving it. Am I completely screwed? Help!!

hollowground said:
I recieved my tilt from Amazon roughly aweek ago. Everything was going fine up until not to long ago. The screen stopped registering any screen taps from the stylus or my finger while everything else worked just fine. I reset the unit a few times hoping to resolve the issue. Nothing. THEN I made the big mistake of hard resetting the unit. Now i get to the calibration screen and no further. Anyone got any ideas? Any idea where I can take this to get looked at? i was contemplating sending it to Amazon as defective but ive already flashed the HTC Rom to it shortly after recieving it. Am I completely screwed? Help!!
Click to expand...
Click to collapse
you could try reflashing the original ROM

Yeah, I tried that shortly after making my original post. Still nothing. I'm curious if the cable for the digitizer came loose somehow (no idea how though) or if it is an actual hard ware issue.
I thought something was wierd when it was working though. When I used the stylus the taps were very inaccurate recently. More so towards the upper hight hand corner of the screen. Calibrated it a few times hoping to correct it but it was always slightly off still. Then it just stopped working all together.I thought it had something to do with my screen protector but after removal was still a no go.
Luckily I am still able to make phone calls thanks to the slide out keyboard. Not sure if it rings or anything when I recieve one though. Still stuck at the calibration screen Any other ideas?
What size star key is needed to disassemble the tilt/tytn II? I may try taking a look inside to see whats up.

hollowground said:
Yeah, I tried that shortly after making my original post. Still nothing. I'm curious if the cable for the digitizer came loose somehow (no idea how though) or if it is an actual hard ware issue.
I thought something was wierd when it was working though. When I used the stylus the taps were very inaccurate recently. More so towards the upper hight hand corner of the screen. Calibrated it a few times hoping to correct it but it was always slightly off still. Then it just stopped working all together.I thought it had something to do with my screen protector but after removal was still a no go.
Luckily I am still able to make phone calls thanks to the slide out keyboard. Not sure if it rings or anything when I recieve one though. Still stuck at the calibration screen Any other ideas?
What size star key is needed to disassemble the tilt/tytn II? I may try taking a look inside to see whats up.
Click to expand...
Click to collapse
If you're stuck at the calibration screen after a hard reset, how are you able to receive calls? Surely the reset hasn't completed?!?
Also, if you have reflashed to the original ROM, and thats now stuck also, then it has least got the correct ROM image on the device, thus allowing you to return it for a replacement.
Still a little confused about how you're able to use it at all though...

i honestly though it wierd myself. after flashing back to the original rom. at the calibration screen if i slide out the keyboard, press the talk button , close then reopen the keyboard, it lets me dial out using the number keys on the keyboard.
I can actually make out the home page behind the calibration screen as the screen reorientates itself.
edited Well I've no idea what just happened but the screen just stared working again out of the blue. My dog jumped on the bed n stepped on it ant the cursor moved. Very weird. Damn I'm lucky. lol Thanks for the input guys. Lets just hope it doesn't happen again XD

return it ..

kash04 said:
return it ..
Click to expand...
Click to collapse
I agree, sounds like a loose connection somewhere

Could be grit between the screen and frame
One of my friends had an XDA Orbit and he had this problem. It turned out it was a crumb or piece of grit wedged between the frame of the phone and the screen causing the screen to be permanently pressed at that point. He used some fine implement (maybe a pin - can't remember) to dig it out. If this was the problem with your phone that may explain why it suddenly started working viz the bit of grit became dislodged by itself.
Cheers,
Ashley

hollowground said:
i My dog jumped on the bed n stepped on it ant the cursor moved. Very weird. Damn I'm lucky. lol Thanks for the input guys. Lets just hope it doesn't happen again XD
Click to expand...
Click to collapse
Thats doggone lucky!! Just another reason to have a dog around...

My buttons don't want to be touched...

Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.

might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..

l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage

and your usb is probably whack

@kaiserII...your usb is whack, haha. that **** made me laugh.

having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.

Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!

Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will

same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...

I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.

didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...

I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.

Any idea how to fix it??

keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry

For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?

oo wow, i have the same problem. hope theres a fix

adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.

Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.

samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.

u542i3 error - need help!

ok my phone has this really annoying error where it will randomly start coming up with number and letters. i thought it was just random at first, but realised it was u542i followed by an unlimited row of 3's every time. this renders my phone unusable because the number 3 keeps being pressed and i cant press any other button. it happens when the keyboard is open or closed. it also does it when the onscreen keyboard is enabled and disabled. i have had the problem a few imes before but it goes away for a good while, but then comes back and its starting to get really annoying. has anyone had this error before and does anyone have a solution.

Water/Liquid damage? Sounds like something internal being shorted out. This behaviour usually happens with moisture or liquid getting inside (well it did with my last phone anyway.) If so, then i think replacement is probably the only option unless you're techy enough to open it up.

ok thanks. i dont know how it wold have got liquid damage though seein as i havent dropped it in water or anything. i cant get a replacement because it doesnt have any warranty. i guess i will just have to wait for the problem to go away again.

You mean it's writing these characters as if they came from the keyboard? You'd think the keyboard would be disabled when closed.

AdamPI said:
You mean it's writing these characters as if they came from the keyboard? You'd think the keyboard would be disabled when closed.
Click to expand...
Click to collapse
yeah the character are typed, only im not the on typing them if that makes sense.

HELP!! my screen works....but it doesnt....

ok guys and gals, heres one for you. i know im a noob but this one has got me stumped and i cant for the life of me find anything in this or any forum or even google. i have the tilt. just flashed a cooked rom for the first time several weeks ago thanks to everyone on here and all the FAQs and stickies. (to any other noob, all the info is out there!!!!! dont be lazy!!! SEARCH AND READ YOUR HEART OUT!!!!) anyway, im running Witscheys latest 6.5 rom build 23071 HSPL 3.34 w/ radio 1.70.19.09. ive been tweakin it pretty much every day tryin to get it to the way i want.
well im so close to finishing and the the screen suddenly decided to randomly not respond to my touch. the buttons were the only way to control the phone. even after numerous soft resets. then it would decide to start responding. so i was doing some research and tried a couple diff methods of fixing "screen freezes" (but i dont think its a "screen freeze" as it worked fine with the use of the buttons) finally found a post in the thread for the room that read:
Originally Posted by cpala
Hi witschey,
I work with you rom a week a go, but sometimes the device screen freeze.
ugoff
Member
I had that same problem. Need to change the cache settings in Advanced Config. The filesystem cache defaults to 512kb, so I set it to auto and it doesn't freeze anymore. I also turned up the glyph cache to 32kb. Between the two, the phone interface runs fast and smooth.
so i tried that and it still didnt fix it. then i decided to just do a hard reset and install one app a day at a time (all the ones i had before the hard reset) to see if one of them was casing it. well after the hard reset i didnt notice the problem anymore. i was stoked. now all i needed to do was figure out which app was giving me trouble. WELL about 10 min later when i was texting my friends as usuall, my phone recieved a message but the screen was black. so i slid it open (wake on slide) and the screen turned on. replied to my buddy,closed the lid and the screen went black..... WTF? slid it open, screen on. closed, screen black.... and so forth. this is the way it has been since yesterday. even tried two more hard resets with no change.
NOW HERES THE WEIRD PART!!! if i slide it open JUST A LITTLE very slowly, the backlight turns on barely. just enuf to see the today screen but its very very dim. its as if there is a bad connection. but the screen is in portrait mode like it should be. if i open it fast the backlight turns on, screen shows portrait, then switches to landscape like it should. close it, it goes black but i know it switches back cuz the next time i open it, i can see it change again.
EVEN WEIRDER--- if open landscape, get into an app or program such as contacts where i can flick to scroll, ill close the lid, immediately flick the screen, open lid and low and behold my friends are just scrollin by!!!! the damn screen is responsive but there is no backlight!!! so to test i plugged into my laptop, activated mymobiler, and EVERYTHING works like it should when i touch the screen, use the buttons, open close the lid. it all shows up on my laptop. but the damn screen is still black when lid is closed. so i can literally look at my laptop and touch the black screen on my tilt and controll it!! WHY IS THE BACKLIGHT SHUTTING OFF WHEN ITS CLOSED!!!!???
so then i decided to tear the damn phone completely apart about 2 hours ago, check all connections, and clean all the dust. all connections checked out fine, put it back together and still have the problem. i know there is a magnet and sensor that tells the screen when to rotate when the screen is opened or closed but its obviously working cuz it will rotate the screen. my guess was that some kind of registry entry has been changed somehow. but then i realized thats not it because the hard resets didnt fix it. now im thinking hardware...... IM SO SORRY THIS POST IS SOOOOOO LOOOONNNNGGG but i dont know what else to do. phone was working great up until yesterday and i cant have this!!! has anyone had this problem with this or any other device or even know which direction to point me in??? PLEASE HELP!!! thanks in advance for any replies!!! the quicker ther better

I think your flat cable is broken. Doesn't make connection when closed (no backlight), barely connects when opened (backlight on).
So I think you need a new flat cable...

I agree with blueflame... I think it has nothing to do withthe rom flash.. it sounds like your ribbon cable is "Starting" to go.. unfortunatly it will only get worse where it wont; read you memory card, and evenutally your Sim card as well (speaking from experiance here).... If you are handy with tools, you can try to but a new one yourself and install it... But there are also some shops aroudnthe world, aswell and some members here who may be able to fix it for you... for a price (and not, I am not one of them)... Sorry for the bad news bud.. but I personally would rather knwo that than hard resettign 100 times and nrto beign able to figure out the problem...

hey. thanks for the fast replies! thats not exactly what i wanted to hear but like Teej said, its better to know than messing around with something else. now by flat cable are you reffering to the biggest ribbon cable inside the phone that connects the screen half of the phone to the keyboard half? Or the connector that comes directly out of the screen itself (meaning i buy a new screen and install and all is well) or is it another cable? but i think those are the only two that have anything to do with the screen other then the one for the sensor/magnet. here is a photo to help point out which ones. i have the manual so i can grab more photos if needed. thanks again for the help so far. good stuff. we are getting somewhere!!
photobucket.com/albums/b145/kewljay223/tilt.jpg

since im not allowed to post outside links yet, type this-----> h-t-t-p-:-/-/-i-1-8-. (minus the dashes between characters) in front of the link in my last post in your address bar to create the ACTUAL LINK and it should take you to the picture.

[Q] keyboard spazzing out

has anyone else experinced there n1 keyboard sometimes just spazzing out..?
meaning you hit one letter and it either writes multiple of that letter or just writes other letters completly..
or for that matter youre trying to slide down the notification bar and nothing happens or the screen just slides to a different home screen..
ive been having that happen to me for a while and sometimes putting it to sleep and bringing it back is a quick fix, sometimes not.. any ideas and fixes?
Thank you

It happens, most of us have experienced it.Likely the digitizer.
Locking/unlocking does fix it. Make sure you're on the latest version of Android too.

Yeah its a well known nexus problem. Just lock and unlock the screen fixes it. Cheap touch layer:-(

Yes I do have the latest update. Sometimes it makes me want to throw the phone. Always seems to happen when. I need the phonebthe most lol. Thank u

holy hell this is happening alot to me now.... its been doing it for the last couple of hours and im trying to text and its impossible!! even tried rebooting cm 6.0

May be dust under the screen?
Sent from my Nexus One using XDA App

Database Develop

welcome