Related
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
I think i remember reading something similar to this on another thread. where the problem was something to do with time sync (by activesync or network). Perhaps somebody who has had this problem can help?
Try disabling the HTC Home plugin and the Task Manager. That seems to help fix it.
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
bo78 said:
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
Click to expand...
Click to collapse
I have some problem and use another alarm proogram.
Try to use some another program like SPB Time or another.
Blacksheep said:
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
Click to expand...
Click to collapse
exact same problem here (i did visit germany not france though )
does anyone have a solution without disabling things like the home plugin?
(it's not the auto change timezone/clock from sim setting as i have that before this prob occured and its still off...)
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
You may want to check your time zone is correct. Also check that the time IS NOT being updated from the network, if your cell provider has an incorrect time zone this could cause the problem.
I have been having the same problem. I can set an alarm for 8:00AM, but it will ALWAYS go off at 7:00AM. If I set it for 8:01AM, it will go off at the right time. I have no idea why it's happening and can't seem to find a solution...
Alarm Problem
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:20 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
cliff_lusk said:
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:30 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
Click to expand...
Click to collapse
I just tried SKTools from this thread recomendation. Hopefully that will work.
Hilal said:
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
Click to expand...
Click to collapse
I agrree - clean Notification Que....., BUT cleaning every week, monts ... so boring.....
stop using buged WM clock to alarm - well, how I said, use some another clock program like SPB Time or similar.
I've always had alarm clock issues with every wm device I've ever used. Either going off at the wrong time or not at all. I downloaded 3rd party gentimer and just transfer it to each new device as I get them. I know I shouldn't have to do this and MS should have a better more reliable alarm system, but for a one time charge of 12 bucks I have peace of mind and no. more dickin' with the damn oem alarm. It's worth it IMHO.
cliff_lusk said:
I just tried SKTools from this thread recomendation. Hopefully that will work.
Click to expand...
Click to collapse
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
cliff_lusk said:
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
Click to expand...
Click to collapse
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Jim_R said:
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Click to expand...
Click to collapse
What do you mean delete the existing timers? Where do I delete them?
I use my old Nokia N70 just because it's so pathetic that HTC or MS (don't know whose fault it is) can't fix a proper alarm.
cliff_lusk said:
What do you mean delete the existing timers? Where do I delete them?
Click to expand...
Click to collapse
Perhaps I confused you by calling the alarms 'timers'. Here's how to delete them:
Start, Settings, Clock & Alarms, Alarms tab.
To delete a previously set alarm, uncheck the checkbox, and de-select days of the week. Click Ok. Do a soft reset.
In my experiance, this will remove duplicate alarms as well.
I've tried that with the exception of removing all of the checked days of the week. I will try that and see what happens. Thanks.
My diamond time delays 1~2 minutes one day, does anybody have the same problem?
Same here. Have you found out what is wrong yet???
Same here, could be because I've unchecked the 'Automatic change time zone and clock' option on the Time Zones tab in the Phone Settings. Even so, my Diamond's internal clock seems to be lagging..
....no, I have checked this, but this is not the cause.....quite annoying..as I need to reset the time daily....:-(
Can anyone help???
I have the same issue as well. Time falls behind about 2/3 mins everyday
No, I have the Diamond for over 2 weeks now and the clock is accurate, same as my computer which is always sync with internet time. I haven't flashed any cooked ROM yet. Still on the Telstra stock ROM at present which I am quite happy, despite a bit bloated.
The problem have been resloved, we should select the 'Automatic change time zone and clock' option on the Time Zones tab in the Phone Settings.
firmware said:
The problem have been resloved, we should select the 'Automatic change time zone and clock' option on the Time Zones tab in the Phone Settings.
Click to expand...
Click to collapse
The 'Automatic change time zone and clock' does not resolve the problem. This has been discussed in a number of threads but so far the problem has not been rectified.
Isnt the clock synchronized with the PC automatically?
So.. if you just sync ur device from time to time, everything works out fine?
I'm again having this same problem. I'm using ROM 1.93.831.1 WWE with Radio 1.00.25.05.
I hope somebody can give some solution to this issue. It would very much appreciated. It's really quite annoying to adjust the time daily.
Hey All, I've have recently flashed Touch-it V4 to my Xperia, but now the clock keeps on randomly changing the time on me. Usually puts it out by an hour, or sometimes 15mins. I've tried putting day light savings time on, selecting my city etc but still randomly changes the time on me.
Also noticed if I set my country, it will randomly change itself as well. Eg. set it to New Zealand, then go back and check and it will be on Fiji??
Anyone know how to fix this?
Is super annoying as messes up my alarms & appointments, nearly missed my flight the other day.
Cheers
Same problem here. Seems to be a TF3D bug. It doesn't seem to recognize daylight savings time. It keeps switching me to the "Bogota, Lima" timezone which is 1 hour behind my real timezone of Eastern Standard (US).
I'll have to use a different panel for now to keep my schedule/alarm on time, probably the SPB Mobile Shell.
Alternatively I could just use "Bogota, Lima" time and set it 1 hour ahead, but then every time I sync the phone, the time will be reset to 1 hour behind and throw my calendars off.
Yea is a right pain, fiddled round with it so much but still can't get it to work
uGo check your iGo?
I had that problem and found it was iGo set to an incorrect time zone, so each time I started the program it changed the time.
- Jeff
sammiebreezes said:
Hey All, I've have recently flashed Touch-it V4 to my Xperia, but now the clock keeps on randomly changing the time on me. Usually puts it out by an hour, or sometimes 15mins. I've tried putting day light savings time on, selecting my city etc but still randomly changes the time on me.
Also noticed if I set my country, it will randomly change itself as well. Eg. set it to New Zealand, then go back and check and it will be on Fiji??
Anyone know how to fix this?
Is super annoying as messes up my alarms & appointments, nearly missed my flight the other day.
Cheers
Click to expand...
Click to collapse
I had this problem, it was so anoying with syncing
go to the "settings">select "phone">select the "time zone" tab, and untick automaticly change timezone or whatever.
I have a htc diamond, but should be similar/same as they both WM
dirran said:
I had this problem, it was so anoying with syncing
go to the "settings">select "phone">select the "time zone" tab, and untick automaticly change timezone or whatever.
I have a htc diamond, but should be similar/same as they both WM
Click to expand...
Click to collapse
Thanks but mine was alredy unticked?
jbcross said:
I had that problem and found it was iGo set to an incorrect time zone, so each time I started the program it changed the time.
- Jeff
Click to expand...
Click to collapse
Where do i find iGo ? Never heard of that
sammiebreezes said:
Thanks but mine was alredy unticked?
Click to expand...
Click to collapse
try ticking the check mark...it worked for mee and then soft reset
I'm fairly certain it's a TF3D bug and whether or not that option is ticked won't make a difference. If you live in a time zone where they observe daylight savings, touching the time on the TF3D home tab will change your time zone to one that's 1 hour behind. If you go back into your clock settings and set it to the correct time zone, it'll be ok until the next time you press the clock in TF3D.
So the short term solution is to never press the time =)
SMS timestamp too
I'm using Touch-It 4.0 II.
I'm also experiencing my time shifting by an hour and that my system clock and alarm settings keeps resetting itself back to Bogota, Lima.
Also, my incoming text messages' timestamp is now always 5 hrs in the past.
Is the clock setting from Touchflo 3D supposed to be aligned with the system clock and alarm settings?
Got the same problem before. Able to fix it by making sure the time settings on my computer where i actively sync my phone are the same. That is time, date, time zone, and if DST settings are checked or not.
dgee said:
I'm using Touch-It 4.0 II.
I'm also experiencing my time shifting by an hour and that my system clock and alarm settings keeps resetting itself back to Bogota, Lima.
Also, my incoming text messages' timestamp is now always 5 hrs in the past.
Is the clock setting from Touchflo 3D supposed to be aligned with the system clock and alarm settings?
Click to expand...
Click to collapse
Just noticed I get hte msn time stamp problem as well, really random though
ERWIN CENIZA said:
Got the same problem before. Able to fix it by making sure the time settings on my computer where i actively sync my phone are the same. That is time, date, time zone, and if DST settings are checked or not.
Click to expand...
Click to collapse
Is def a problem with touchflow, flashed generic rom back & now phone is working fine again
+1 on this...
Time zone
I read somewhere that the reason text messages were coming in 5 hrs off was that the Rogers tower was doing its own 5 hr timezone offset on the messages so I ended up getting messages with a timestamp of 5 hrs ago. But I never experienced this problem on my Vox so I don't know. I haven't tried to reflash my ROM to a generic and receive text messages either.
Did anyone else notice this SMS timestamp problem only after flashing to a touchflo 3d rom?
Anyone know if this is fixed in touchflow ver 5? Never had the problem with v3
try not to run any navigation apps..i found out my garmin always changing my time every timr i start the apps..
I ad the same problem
In settings of my navigation (Polish AutoMapa) i can turn off synchronization of my time with gps. (sry 4 my english)
The issue im speaking of is the actual home screen clock. Every morning I have to re set it because it ends up becoming off by a few hours. I searched this forum and couldnt find anything. I had also posted the question in the Energy rom thread, but it kept getting swamped out by random question. Im running a tilt 2 FYI.
Any help appreciated, thanx
uncleswoop said:
The issue im speaking of is the actual home screen clock. Every morning I have to re set it because it ends up becoming off by a few hours. I searched this forum and couldnt find anything. I had also posted the question in the Energy rom thread, but it kept getting swamped out by random question. Im running a tilt 2 FYI.
Any help appreciated, thanx
Click to expand...
Click to collapse
Did you set your time zone? Did you turn on or off internet time sync? Did you uncheck get time from network under phone settings? Any of these could be the cause of your problems...
Im feeling really dumb this morning...My alarm didnt go off this morning because of this same problem. And I cant for the life of me figure out hwo to make sure the clock is auto updating to the network.
Im running Energy Cookie Reference. I have seen the settings before...but cant locate them today.
Time synchronization?
Hi.
Do you have the automatic time synchronization on? Try to disable it.
Settings -> Personal -> Phone ->
or
Sense settings tab -> data services -> internet time sync ->
Hey thanks for the response...my settings are different though. I found the setting in BSB Tweaks and turned it off...only time will tell if it helps though...we will see if my phone fails to wake me up again tomorrow...
Left Energy yet again because of this issue...I dont know a whole lot about the technicalities but it seemed to me that the phone is 'going to sleep' and actually losing track of the time thus keeping my alarm from sounding in the mornings.
When I hit the power button to wake the screen up in the mornings it would be displaying a time that was hours behind and seemingly random (what lead me to believe the phone was in a deeper sleep than normal). Possibly a really stupid theory...but like I said I dont know a whole lot. I just know it was way unacceptable in my case.
I will still monitor his threads like always and try the latest and greatest ROMS.
Clock Issue with Energy romArrow
I think the problem you are having is the windows alarm bug. I used to get this all the time until i started using g-alarm. it fixes the issue when you first install it. (note that its a paid app.) but here is the description and the registry edit that you need to change to fix the problem.
can't post the link soo you will need to copy and paste the url below if you want to view the webpage.
ageye.de/index.php?s=galarm/support/manual/limitations
Windows alarm bug
Windows Mobile has on some devices a strange behaviour: Although an alarm is successfully added to the WM notification queue (it's like a scheduler) it doesn't go off.
Searching the web gave me following information:
At midnight WM rebuilds the notification queue, therefore it wakes up for about 15 seconds. If the notification queue is too big or the device too slow WM goes to sleep again before it could finish building the queue for the next day.
If you force WM too stay awake for a longer time, it should successfully build the queue on at least more devices.
If you start G-Alarm and it complains about the Windows alarm bug, you've got the default WM settings (15 seconds WakeUpTime). If you press "Yes" G-Alarm changes it to 120 seconds which should be enough.
Here are the registry values G-Alarm changes:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts\ACResumingSuspendTimeout
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts\BattResumingSuspendTimeout
Click to expand...
Click to collapse
Hi guys.
I am a french guy with an european One with the Soft version 4.19.401.11.
I have 2 issues since this update:
- with the date & time set on automatic, my One is in late. In firt, it was few minutes (7 or 9). Now, it's in late of 31 min.
I have to disable the automatic time and set it manualy.
- the screen timeout doesn't work someting (maybe there is a link with my time issue). Sometimes, the sreen stays "on" and I have to shut it off myself.
For exemple, when I charge the phone and I remove the power adapter, my screen stay "on" and if I don't take care, it use my battery.
I made 3 or 4 reset and the trouble is still here.
Anyone have a solution please?
Thanks a lot.
Blakos said:
Hi guys.
I am a french guy with an european One with the Soft version 4.19.401.11.
I have 2 issues since this update:
- with the date & time set on automatic, my One is in late. In firt, it was few minutes (7 or 9). Now, it's in late of 31 min.
I have to disable the automatic time and set it manualy.
- the screen timeout doesn't work someting (maybe there is a link with my time issue). Sometimes, the sreen stays "on" and I have to shut it off myself.
For exemple, when I charge the phone and I remove the power adapter, my screen stay "on" and if I don't take care, it use my battery.
I made 3 or 4 reset and the trouble is still here.
Anyone have a solution please?
Thanks a lot.
Click to expand...
Click to collapse
Use an app like GSAM battery monitor to find out if you have any wakelocks. I sometimes have a similar problem with the screen staying on if I hav my phone on auto-standby, Maybe try another setting
Thanks yoda1998, I'll try this app.
Blakos said:
Thanks yoda1998, I'll try this app.
Click to expand...
Click to collapse
I try other settings, I use the App but it only show that the screen use my batterie.
I still have a situation here...
Up please!
Thanks.
I found something today: http://www.droid-life.com/2014/05/2...ve-amount-of-battery-google-working-on-a-fix/
I uninstalled the last version of Hangouts for installaling the stock one and I'm testing now...