Hi guys,
I installed the tofclock WM6 ROM which should have included the .NET CF2.
But when installing and running NET applications I always get the error message which advises me to install "netcf.core.ppc3.ARM.cab" .. isn't that the NET CF ?
So long
HonkBB
I've been installing and running several programs that depend on .NET CF2 with no problems from the first day the first WM6 Hima ROM came out. Today I suddenly ran into problems with THREE different programs.
Two out of these three are now working after extracting a .netcfsetup.msi , copying the NETCFv2.wm.armv4i.cab, netcfrtl.dll, netcflaunch.exe to storage card, running the cab and soft reset. If you already installed netcfsetup.msi, these files are on your desktop computer in the program files\microsoft.net folder.
I can't imagine that it has anything to do with the date of today so the only reasonable explanation I have of 4 similar occurrences on 1 day (yours plus my 3) is that there is "something" around that messes up .NET. I doubt if it could be malware. That leaves as other candidates a cab that overwrites any of the .net files or settings, or an uninstall that removes more than it's supposed to do.
It is possible that we're both victim of the same culprit, it's just as possible that there are several potential culprits around.
BTW the file you mention is a .NET v1 cab... Perhaps older programs need it even when v2 is installed?
I'm planning to cook my own ROM soon (my first one, exciting) so I intend to dive into this matter a bit deeper.
Any suggestions from .NET scholars?
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
I had 3.5 installed on my Fuze and was following a guide which involves installing .NET CF 3.5, but with a .cab under a different name than the one from Microsoft. It uninstalled the version I had gotten from MS then gave me an error. I did what the error told me to do, and once again I got an error. I then figured maybe it was just the .cab and tried to use my MS one again, got the same error. I did a soft reset and still get the error. The error just says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 2." Somewhere online I found that if you go to \windows\mscoree.dll and rename it you'll be able to reinstall .NET CF 3.5 without any errors but when I looked for that file I could seem to find it.
EDIT: Found "mscoree.dll" and renamed it to "mscoree.backup.dll" Ran installation again, no errors.
I current have a htc fuze running on The latest Energyrom leo 28011 build.
certain progams will not function because of this and i get an error message, can someone help me with this because im not the greatest at this
Exact message...
The application failed to load required components.
If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation on the .NET Compact framework is recommended, support info -214749552 (80001000)
I found this to be a problem in several 280xx builds too. Wouldn't let me update or anything.
superchilpil said:
I current have a htc fuze running on The latest Energyrom leo 28011 build.
certain progams will not function because of this and i get an error message, can someone help me with this because im not the greatest at this
Exact message...
The application failed to load required components.
If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation on the .NET Compact framework is recommended, support info -214749552 (80001000)
Click to expand...
Click to collapse
I Feel like am idiot now, its a simple download... but maybe someone should look into solving this