Database Develop

.NET Framework not cooked into ROM ?

Hi guys,
I installed the tofclock WM6 ROM which should have included the .NET CF2.
But when installing and running NET applications I always get the error message which advises me to install "netcf.core.ppc3.ARM.cab" .. isn't that the NET CF ?
So long
HonkBB

I've been installing and running several programs that depend on .NET CF2 with no problems from the first day the first WM6 Hima ROM came out. Today I suddenly ran into problems with THREE different programs.
Two out of these three are now working after extracting a .netcfsetup.msi , copying the NETCFv2.wm.armv4i.cab, netcfrtl.dll, netcflaunch.exe to storage card, running the cab and soft reset. If you already installed netcfsetup.msi, these files are on your desktop computer in the program files\microsoft.net folder.
I can't imagine that it has anything to do with the date of today so the only reasonable explanation I have of 4 similar occurrences on 1 day (yours plus my 3) is that there is "something" around that messes up .NET. I doubt if it could be malware. That leaves as other candidates a cab that overwrites any of the .net files or settings, or an uninstall that removes more than it's supposed to do.
It is possible that we're both victim of the same culprit, it's just as possible that there are several potential culprits around.
BTW the file you mention is a .NET v1 cab... Perhaps older programs need it even when v2 is installed?
I'm planning to cook my own ROM soon (my first one, exciting) so I intend to dive into this matter a bit deeper.
Any suggestions from .NET scholars?

'Application not signed' with new ROM

Hi, I installed the superlite ROM and when launching some applications on my X1 wm6.1, i get a message saying that the 'application file cannot be opened as it is not signed by a trusted cert or one of its components are missing' - i know what this means, but how do i get around it? I tried to edit the registry but kept getting an 'access denied' message...help!
I don't really want to reflash ROM as i have quite a few email accounts that take a while to set up

maybe the rom does not contain the sdk certificates. try this one see if it helps
what rom is that btw?

hi - its the superlite rom on this forum - much faster than the standard rom, which makes the X1 as slow as a slug!

I reloaded the new SuperLite ROM and still the same problem...help!

encryptedx1 said:
I reloaded the new SuperLite ROM and still the same problem...help!
Click to expand...
Click to collapse
Superlite means = more usual softwares ripped from the rom, you need to install back a component that the app needs. This can be .NET CF, SQLCE Mobile, etc. What is the program you are trying to launch? If it's the Calculator, you'll need definitely .NET Compact Framework.

.NET Framework 3.5 not installing on Tilt!

I've been trying to install the .NET framework for my Tilt, and it keeps spitting out "installation unsuccessful". It installs fine on my computer, then it goes to install it to my phone via ActiveSync (Windows Mobile Device Center actually because I use Vista). The installation screen on my Tilt pops up saying it's installing, but the bar doesn't move at all, and after a few seconds it just says it's unsuccessful without giving a reason!
I'm using the stock ATT Tilt rom, 6.1 version. I haven't done anything special to it, so I have no idea why it wouldn't work...
Can anyone spare some sage wisdom as to why this won't install? I'm trying to use wmVista and it needs 3.5 to work .
Note: I downloaded the .NET 3.5 right from Microsoft: http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en

Have you tried copying the NET CF3.5.cab directly to your Kaiser & then installing. The cab can be found in the installation folder on your PC or on this site if you do a search.
I've always installed from the cab file never from the PC installation so might be worth you trying it !

You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.

pjcforpres said:
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
Click to expand...
Click to collapse
Ah, I saw that thread before posting but I assumed by his first post that his problem was different than mine. I just check it out again and saw the direct downloads for the cab file, so I'm gonna try that out. Thank you for your help!
(I'm a new poster, but I've been lurking around these boards for a while now looking for stuff for my Tilt)
Hopefully this works...

i installed .NET CF 3.5 on my device then after installing my camera is just plain black and doesnt show any picture.

problem solved!
- i installed Resco Registry Explorer and .NET compact framework 3.5 on my Kaiser
- opened resco registry and searched for the .NET CF
- disabled .NET CF 2.0 by changing value from 1 to 0
- then enable .NET CF 3.5 by changing value from 0 to 1

I had the same problem, used your link, it worked perfectly. THANKS!!!!

.net Compact framework problems

Well. i need new version of .net compact framework.
so i tryed to install NETCFv35.wm.armv4i.CAB
But that gives me an error, and cannot install..
tryed a lot of different thingies, but cant get out..
who can help me with this??
Got tytn2 (original MDA vario 3) with newest original HTC rom availible

what error are you getting?

program i wanna run says it needs newer version of .net CF
installation .cab says cannot install shut down programs free up space error info : 2
(i have enough space free and shut down all programs... )

.net compact framework
That means .net is already in the rom

i also had the .cf configurator installed.. sayz nothing about the new 3.5 version installed
and programs i wanna run, say they need newer version..
How 2 fix?

.net compact framework
Here install this and you will see what im talking about after install look in your programs folder.

it says.
Versions installed: 2.0.7045.0 (ROM)
PPC 5.2.19212
How do i update this 2 .net CF 3.5??

Fixxed
install http://www.dinarsoft.com/memmaid/download.html
goto running processes, and terminate all the processes wich arent system..

NETCf 3.5
i also cannot install the NETCF 3.5..my file is NETCFSetup35.msi (downloaded from microsoft site, 33.3MB)
it said that Installation of Microsoft .NETCF 3.5 was unseccessfull..
i dont know whats wrong with it..
my net compact version:
2.0.7045.0 (ROM)
pocket pc
5.2.19212
(just the same as above)
so how to upgrade become 3.5..or which files should i download?
thanx for the advice

do as explained.
Download NETCFv35.wm.armv4i.CAB
install http://www.dinarsoft.com/memmaid/download.html
goto running processes, and terminate all the processes wich arent system..
--> install NETCFv35.wm.armv4i.CAB
reboot, run NETCFCFG.cab and set the 3.5 version as the one wich needs to be used.

I've already installed memMaid..
but the problem is..i dont have the NETCFv35.wm.armv4i.CAB file
i just have the one downloaded from microsoft (.msi, size 33,3 MB) is it the right file?..because when i tried to install,it said unsuccessful..no other warning to kill other process, etc..
do u have link to the file -> NETCFv35.wm.armv4i.CAB
thank u so much if u provide the link

problem solved

Help Diamond Compact Framework 3.5 stopped working

Help 3.5 framework isn't working and I can't update it toboot...:-/
might have something to do with memaid as I moved a few dlls to the internal storage....but I'm not sure. Also tried uninstalling it and that seemed to fail..
Tried reinstalling and I'm getting:
Installation error. Stop all applications and processes, maximise available storage space, and run iinstallation again. Support info: 2'
I'm at my wits end as quite a few programs I liked using require this...Help please!

anyone know how i can completely remove .net framework and try again as the reinstall is failing and uninstall isnt working either perhaps ill have to do it manually?
I have *so* many programs installed that I don't want to flash a fresh ROM.....it'll take *way* too long to set my device up again. It'd take months perhaps.
pretty pretty pretty please help me :-/

Tried tweaking now can't see .net compact framework but install still fails with the same error code.
Can anyone help?.....
Please?

Deleted all reg entries at:
HK Local machine\software\microsoft\netframework...
Reinstall of 2.0 framework appeared successful....
Errors on reboot. Programs which require it crashing with:
File or assembly name
One program:
'System.Windows.Forms, Version=3.5.0.0, Culture=neutral, PublicKeyToken=969DB8053D3322AC', or one of its dependencies, was not found.'
AdvancedConfig givesthe same error (and I really need to tweak some of these settings back but it won't load!)
ShootMe! crashes simply with 'We're sorry' and I can't see the error report.....
Please someone help! I'm at my wits end. I'll try deleting the reg entries and installing .net framework 3.5 in the hope.....