Related
Anyone heard if this is possible?
Hmmm...I'm interested in that too!
I saw a repack of the requisite files floating around elsewhere - I might give installing it a shot and see what happens.
Worst case is it hard resets my device or shoots freaking laserbeams across the house, hitting my brother's girlfriend, which at the moment I would consider a useful feature...
culd some one post a picture of it running on treo 750 ?
what means touchflo? .. give me link or explanation.. thx
vasek said:
what means touchflo? .. give me link or explanation.. thx
Click to expand...
Click to collapse
check out the HTC Touch
I think with the touchflo interface, the 750v would be near perfect!
That being the case, gimme it please
Simmiter....if you get hold of it and make it work...can you post a few pics and give a comment on your expedition?
Cheers
motorwayne
justin_stuckey said:
Anyone heard if this is possible?
Click to expand...
Click to collapse
I went ahead and install the 5 tab htc today plugin and played around with it. Their seems to be a stability problem as the treo now would randomly reboot itself. I tried installing it after a hard reset and it seems okay but started rebooting again after installing my apps. got rid of it for now... hehe
just installed the 6 tab htc home no trouble so far awaiting the probs though
hey guys i heard that the 3 tab works with our 750...i heard it somewhere in the touch threads...btw id we install it, with a simple uninstall and a soft reset, will it get everything back to normal??? or a hard reset is what we have to do to get it normal again...btw where are you guys d/l'ing the touchflo for the 750 from???links please...
hey I have actually installed it on my Treo its loads with no probs. However there are a couple of conflicts like not being able to access the dial pad or call log via the call button. I have even experienced this error while clicking on call log or dial pad. After a little research I found it to be a conflict between the htc home and palm software. Simply clinkin on the left hand corner to initiate the x button pop up I can then click on both the call log as well as the dial pad with out a problem. As for the touch flo cube it does not fit the entire screen, I assume this to be just be the treos 240x240 screen. I also noticed the cube to be slow in it's revolving. If we can get past the conflicts and adapt the program to the treo's screen its possible we might even get it to run as smooth as it does on the artemis. I am shocked at the few interested in advancing such a feature on the treo. I am sure once the cooked roms start to surface we can truly unlock the power of the device.
which touchflo program did you load and where did you get it?
Issues...
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Touchflo on the Treo 750
Does anyone know how to contact PDAViet? He would be our best option. He may be kind enough to make a rom for the 750 ?? Holding my breath ...
TouchFLO and HTCHome are two very different things.
zeek112 said:
TouchFLO and HTCHome are two very different things.
Click to expand...
Click to collapse
Can someone send me the File for both TouchFLO or HTCHome? Thanks.
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
[email protected] said:
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Click to expand...
Click to collapse
I installed the 6 Button Kaiser HTC home plugin on my Treo 750 and have no problems with it @ all. As for the green and the Red buttons, all u have to do is add the "Dial Lookup" to the Today screen and the green and red buttons will work perfectly.
HTC Home and TouchFlo are 2 totally different things. HTC Home is the Today Screen plug-in, TouchFlo is the 3D cube, finger scrolling etc which was 1st introduced in the HTC Touch phone.
trjons said:
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
Click to expand...
Click to collapse
HTC Home
http://forum.xda-developers.com/showthread.php?t=327646&highlight=6+tab+htc+home
HTC TouchFlo is not as easy as just a cab to install. TouchFlo needs to update files on the device that can't be changed will the OS is running, n that's why TouchFlo has to be cooked in the ROM
Ok....
With Dial Lookup checked, the red and green buttons work! Thanks for that.
The problem now is that there is wasted screen real estate below the Kaiser plugin for the network carrier logo.
Hidelogo causes resets so don't bother.
and if you try to type contacts by name they go off the bottom of the screen. is there a way to use the screen better?
I'm about fed up with TouchFlo 3D, nice but pretty useless and I REALLY miss the Cube from my Touch Dual, much more convenient and doens't waste CPU cycles, so...has anyone installed it on the Diamond ?
Found a few existing CUBE topics, but not sure if there might not be interference and if a VGA skin is needed.
Topics : http://forum.xda-developers.com/showthread.php?t=343583 and http://forum.xda-developers.com/showthread.php?t=348437
Ok had to hard reset...
Was hopeful after a post by SecureGSM :
"HKLM\Software\OEM\TFLOSettings:
also, there is one that is suppose to enable cube finctionality there:
EnableCube : default value (0) <--change that to (1)"
But not working for me.
Its not so simple as switching cube on. Cube is simply not there in our Diamond. If u try to install this Cube configurator from the Elf thread, u'll see a multitude of errors, missing files, etc. Cube may be functional here, but we'll be needing all those files
Yes, that sucks, the CUBE is x times more useful than TouchFlo 3D IMHO.
There must be a way though because it was added to non touch devices.
i dun think we'll have to descend to the non touch method, they use flash. i'm sure if we can get the Touch Cruise for example, and get their files, and put it in, it should work? i think
Catching up, I also thought this would do it http://forum.xda-developers.com/showthread.php?t=348437 but so far no luck either.
bump - hope someone can figure it out ;-)
Another bump, that would be such a useful addition, I'm sure the bright minds around here can figure how to add the Cube back ;-)
have u tried Touch Commander?
Not sure, got a link ? I tried the tools linked in the first message and no go, had to hard reset.
I know a guy who might be very good at this ... Duttie or something like that
Unfortunatly, he is not around (yet)
Sounds good, hope he joins us soon !
Have you considered something like this:
http://www.spbsoftwarehouse.com/products/mobileshell/?en
There are a couple of other similar GUIs out there and the good thing about them that they all VGA optimized.
to add one more
http://www.pointui.com/Home.aspx
and it's variation by GSmart
http://www.smartdevicefreeware.com/gsmart-windows-mobile-touch-gui/
Thanks, but what I like about the cube is up and down the gesture to bring the contact list and then left to right for the various tools. The Contact list would be enough actually.
bumping it up ;-)
obender said:
to add one more
http://www.pointui.com/Home.aspx
and it's variation by GSmart
http://www.smartdevicefreeware.com/gsmart-windows-mobile-touch-gui/
Click to expand...
Click to collapse
gsmart just buggerd up my diamond....
i won't be trying that again in a hurry
this looks good if they can get it to fit our screen
http://forum.xda-developers.com/showthread.php?t=417825
Any news guys ? I was so happy with my Touch Cruise but bought the Diamond for the 640x480 screen and faster video playback.
The TouchFlow 3D looks fine but it's very useless to me, The old TouchFlo Cube from the cruise could be swept away and you had your normal windows todayscreen.
I tried the Cube thing SPD Mobile Shell but the old originall CUBE is way better I think.
Any solutions ?
Bump!!! I Want The Cube!!!!!!
same here, in fact I want it so much I've stuck with the HTC Touch Dual, aka Nike !
Hi ..i just bought a htc diamond and have a lot of problems about it .the touch flo system is working like hell the screen is getting black when i call somebody ,it just blocks itself.i read about the diamond tweak and scharps but just can't figure out where the hkml's are and what tweaks should i really adjust
install total commander and you'll eb able to see and edit your registry where the hkml is.. the rest i guess you would figgure out.. i also suggest oyu to hardspl your phone and install a custom rom which might make you phone run faster even in tf3d...
black screen
your phone is not faulty....thats the diamond for you
please use search button " black screen" this will sort this for you
the search button is your best friend on this forum
good luck and welcome to the forum
I have tried the Samsung user interface on my phone, and I loved it only, one problem, no one has resized the icon to be finger friendly with a 480 x 640 VGA screen, so if any one can help that would be greatly appreciated.
-CR7KB24
CR7KB24 said:
I have tried the Samsung user interface on my phone, and I loved it only, one problem, no one has resized the icon to be finger friendly with a 480 x 640 VGA screen, so if any one can help that would be greatly appreciated.
-CR7KB24
Click to expand...
Click to collapse
Bump! I'm jealous of the omnia too....!
Samsung user interface let me get this right you have it on your pro. How did you it and does it work better or as good as flo 3d.
kaos29205 said:
Samsung user interface let me get this right you have it on your pro. How did you it and does it work better or as good as flo 3d.
Click to expand...
Click to collapse
TF3D and omnima are two different today plugins it pretty much what you like, you can try it yourself, but a word of warning might not be able to restart your phone if you select today 2 plugin ( I speak from experience) you will have to do a hard reset to bring it back up(reset button, volume down and glowing circle at the same time release reset and hold other two, then follow instructions. you will loose any date saved on your phone). but if you still wanna try search for samsung goodies thread and good luck
Here is the link for the program for those that haven't found it
FEWidgets
If you are looking for more widgets, check this: User Made Widgets
The app can be run as just an app to play around with it or can be put instead of tf3d as today screen. if you want to have a vga as background though, you will have to copy a vga pic in the program files folder few widgets.
vga omnia
for anyone waiting for a resize of the omnia ui its on ppcgeeks.com the link isbelow if someone can upload here that would great i tried and could'nt
This is a Conflipper/Juggalo_X Production, we have made a Vga version of Opera Browsers Mobile 9.5 Build 15233
In this thread you will find, The Opera_9.5_Build_15233 VGA Cab installer By Confilpper
The Opera Opera_9.5_Build_15233 VGA OEM Package By Juggalo_X
Adobe/MS Flash Lite 3.1 Official EMU Release ce-os 20757 By Juggalo_X
Omnia D3D Graphics driver By Juggalo_X <------ recommended for this browser and flash lite!!
enjoy and remember if you cook with these give credit to my main man Conflipper for making the vga skin.
Also: once we get the original skin in vga working correctly we will re release wiht it.
http://forum.ppcgeeks.com/attachment.php?attachmentid=19953&d=1230910605
http://forum.ppcgeeks.com/attachment.php?attachmentid=19963&d=1230919494
http://forum.ppcgeeks.com/attachment.php?attachmentid=19964&d=1230919546
Hello
I am not sure if this is the right thead since my phone is a chinese cloned one... but I hope you guys can help me out.
I know there are some T5353 with a (+) or (-) sign at the end. Mine just has T5353 written down on the back without any sign.
It has wm6.1 installed and the keypad is the very tiny one that comes with the standard rom. I would like to have bigger keys. After browsing for a while I found a CAB with the original keypad for the Topaz. I got it installed but man... it was HUGE!! I was only able to see a couple keys taking up the whole screen.... so I ended up uninstalling it. I have a WQVGA 400x240 screen.
Is there a cab or a way to change it? make it easier to type?
Any help is much appreciated.
Thanks!
anyone please?