Database Develop

very silent dial tone

hi , when i call someone i got a very silent dial tone .
any one know how to raise the volume of the dial tone?
i have on original htc tytn 2 with original rom.
(soft reset is not helping)
thanx

kekelen said:
hi , when i call someone i got a very silent dial tone .
any one know how to raise the volume of the dial tone?
i have on original htc tytn 2 with original rom.
(soft reset is not helping)
thanx
Click to expand...
Click to collapse
Mobile phones don't have dial tones, unless you have a Jitterbug phone. You are hearing some other tone, or maybe the sound you are hearing is a byproduct of some part of the phone. For example, on the older model Motorola V3's the EL keypad backlight would emit a low volume tone when lit. Does your "dial tone" stop when the backlight dims or shuts off when in a call? If so then you are hearing the backlight. Most people can't hear it because it is above the range of normal human hearing.
If it is the backlight you are hearing you cannot increase the sound. It is what it is.
-Jay

props for knowledge of the jitterbug.

ChumleyEX said:
props for knowledge of the jitterbug.
Click to expand...
Click to collapse
Yeah, we really ragged on Jitterbug for that (and other things) in another forum I'm in when they first came out.
-Jay

i think i expressed my self wrong.
when i want to call someone and i press his number and then press the call button u should here a sound that the phone is ringing (on the other side).
and that ringing sound is very silent.
is there a way to increase the volume on the ringing sound.

kekelen said:
i think i expressed my self wrong.
when i want to call someone and i press his number and then press the call button u should here a sound that the phone is ringing (on the other side).
and that ringing sound is very silent.
is there a way to increase the volume on the ringing sound.
Click to expand...
Click to collapse
If turning the volume wheel does not do it then there is no way I know of.
-Jay

not just 'a bit silent' then?

no it is realy silent .jou can hear it but if you hold your phone 20-30cm from you ,you cant hear it .
also when putting it on speaker you cant hear it.(because then you are more than 30 cm from your phone.)
when the pickup the sound is fine and loud.

I have the same probleme with my blackstone and its very annoying. if there is some noise you cant heard dial tone when you call someone.

Incoming calls

HI guys! I have a little problem on my wings: when I'm already on a call and someone calls me, I don't recevive any acoustic alert; I mean, the screen shows me that there is another incoming call but if I have the phone at my ear I can't see the screen. Is there a way to make the phone ring or vibrate or anything else that tells me that there is another call??
THX

Settings=>Phone=>Call Waiting. Make sure "Provide call waiting notifications" is checked and then go into Settings=>Accessibility and change your In-call alert volume to increase the tone.

Thanks. I found out that I had changed too many keys in the registry

Impossible to enable the phone ringtone !!!

Hello,
for now a couple of days, my phone only vibrates when receiving calls.
So I increase the ringtone volume, but when I go back to my ringtone volume preferences, the cursor is down ! So I can't increase the ringtone volume, it remains down to 0 ...
Does anyone else have this problem ?
I'm using the official HTC 6.1 ROM, with Manilla 2D.

Waiting tone volume

Hi,
When i'm calling someone, i'd like to hear the waiting tone instead of just waiting for a vibration... Is there a way to set this volume as loud as the general volume of the phone ?
thx

Ringtone problem

Hi,
I have been having this problem for the last couple of days, for some reason the volume of my ringer has dramatically decreased to the point where i can't hear the phone ring when it's in my pocket (wasn't the case before). When i try to play the ring tone (it's a wave file by the way) using the media player the volume is normal and very loud, the same applies to when i play it from the settings->sounds&notifications the volume on the ring tone is perfect, but when i receive a phone call the ringer volume is cut down by more than half, i checked the ringer volume and it's set to the max, I also did a hard reset then restored my files using the sprint backup but the problem didn't get fixed, I tried using a different ring tones and the same happens. any help would be greatly appreciated.

There are three volume controls: System, Ring and In call Volume.
Have you checked the System Volume?
If you press up on the hard volume key, you'll see arrow on the top right to switch to the next vol control. Check there.
HTH

ringtone problem
yea all 3 volumes are set to the max level

ringtone volume problem
the phone has the original stock rom from rogers (canada) hope this helps in any way

Have you got any profile managers installed (G-profile, Phoneweaver etc)?

ringtone volume problem
no i dont have a profile managers installed... so i just noticed that when the phone start ringing and i dont pick up, a second before the phone stops ringing the volume of the ringtone increases to the normal level (then stops ringing), the increase of the ringtone volume happens for like a split second after the caller hangs up and the phone stops ringing. hope this helps in any way. Thank you

Sounds like you have a Ringtone delay problem, there are a couple of solutions.
1. Disable HTC dialer (and use the Winmo one instead), can be done using Advanced Configurator 3.3.
2. Try the CAB I've attached, remember to only use WAV as ringtone though.
I would also recommend adjusting Call Forwarding timing to 30seconds. Settings/Phone/Services/Call Forwarding and get settings.
Disabling the HTC dialer is probably going to be the best solution as the HTC dialer is a hungry resource eating monster but I would just try the CAB and adjusting Call Forwarding time. There are some other REG setting as well but I never found them useful.