Blue Angel Hardware Repaire - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hi,
I dont know is this is already been posted befor, just want to ask for any of you guys a help on how repaire may blue angel mohterboard, this is the situation, i followed the instruction on how to create a moded battery for xda blue angel but unfurtunatley i accidentally swap the polarity on my battery (instead of positve terminal i soldered in negative terminal) after that may BA wont turn on but when i connect directly to my charger it turns on and boot to OS, after i get to home screen my BA restarted already. any one of you guys could help me fix my BA,
Note: Im using WM 6.5 rom
thanks for all your help
ijsellado

Related

hel plz my blue angel is saying goodbye to me

help people plz my blue angel dont want to pass the align screen(when i tap on the screen on the black cross each 4 times it comes again and agian) after i setup the wm5 leatest helmi version
i dont know y but it was working perfectly this day
what shall i do?
vhmed88 said:
help people plz my blue angel dont want to pass the align screen(when i tap on the screen on the black cross each 4 times it comes again and agian) after i setup the wm5 leatest helmi version
i dont know y but it was working perfectly this day
what shall i do?
Click to expand...
Click to collapse
You could try a proper hard-reset, i.e. the erase storage screen you did when you first installed it. If that doesn't fix it, you may have a hardware problem.
j
actually i tryed hard reset and installed windows 2003
but the problem is still
i dont know what happened i didnt hit it or scratch it even
it was working perfectly today and suddnly this
so strange plz help people any one have any thing to help plz say it
your touch screen sensor is seems to be broken
having owned my BA for about 1 year (i'm guessing it's about 2 yrs old in total), i'm not impressed with build quality.
- poor coating/finish (scratches!)
- headphone socket broke off
- power button broke off
- volume slider broken
- loose sliding mechanism
- loose stylus
- headphones torn and cracked
and, i DO use it carefully and store it in case when not in use.

HTC p3600 trinity boot problem

i started having this problem a month ago. after boot the PPC writes something in red and after a few seconds gets black
i recorded it so it would be clearer
http://il.youtube.com/watch?v=NAHqAZS2nZ4
i tried installing a few roms and even the original one from htc website
i would appreciate any help you can give me
Very strange. What SPL version doyou have? Have you used cooked roms? Anything else happend to the phone?
HTC trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/202845245/Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
Hey! My trinity have the same problem!!!
I habe all test: Without sim, without SD, with SD, with SIM (with SIM screen is grey)
What have you done?
Original ROM - same problem
Mine was doing this earlier
seemed that their was dirt stuck in the reset button hole causing it to stick in slightly
I got this problem too. My trinity would turn on and start to fade away. But mine was a liltle more artistic. Many times i saw a kinda round spot in the middle of the screen that become black, then half of the screen would black out and then the rest of the screen. Sometimes i even got colors.
I noticed if a had a fully charged battery the phone would work perfectly.
But most of the time it turn on, but the screen stayed black with the retro light on.
I was told to try the unbrick exploit.
me too !!! i have the same problem with my htc 3600 ? can someone help us to fix our htc's 3600 ?thanks in advance....
have you fix it ?
hi all
I have a small problem with my htc p3600. It's not starting. It's loading only the bios but it's freezing with the screen picture and is not loading the WM 5.0 I try to change the WM5.0 with a new one but I don't have a active sync. connection.Please help
has anyone found a solution to this problem ?
anyone have a solution?
Finally, what you should do?
Since the Trinity / P3600 is getting old now, I believe more and more people are going to face this strange problem sooner or later.
So I thought I should save your time and tell you what you should do when your trinity starts behaving like what was described at the beginning of this thread.
YOU SHOULD DO NOTHING !!
THERE IS NO QUICK FIX
THERE IS NO WORKAROUND
THERE IS NO CHEAP SOLUTION
I have searched and tried everything mentioned in this forum that might slightly be related to the problem and all solutions failed.
So after days and days of experimenting, I gave up and sent my device to HTC dealer who called me few days later to tell me that the mother board needs to be replaced.
The dealer told me the cost will be around $213, but they said they are going to sent it back as it is, because they don't have that board model anymore!!.
Even if they had, for an old device like this , I don't think it worth that mush money to fix.
**************************************************************************
*SO BASICALLY , DON'T WASTE YOUR TIME TRYING TO FIX IT AND BUY YOURSELF A NEW ONE. *
**************************************************************************
.
.
.
.
Hello,
I resolve the problem with this : Simultnous press Power and Camera buttons and softreset, you'll got bootloader, three colors mode. Perhaps a little error message like this WLAN error but if you plug usb, it's ok.
Hope this good for you (excuse my poor english)
I've had this same problem for about a year now and keep coming back to it.
Any forward momentum on solving the problem would be appreciated as I quite like this phone.
1. The phone will boot FINE without a SIM
2. It hangs like in the video (or other strange screens) as soon as I insert a SIM card (partially or fully)
3. I've tried 3 different SIM cards
4. I have no SD cards
5. I have installed 3.20.Olipro
6. An official ROM is re-installed
I must admit the phone has had a hard life (or is it just the cheap plastic coatings HTC use)
No sooner did I post this did I find a solution.
For anyone that is interested...I have managed to re-install the original HTC ROM but HAVE NOT managed to install a workable 6.5 ROM yet.
So, the answer I found was:
1. Put P3600i into bootloader mode (push camera+power+reset buttons for 2 secs and get triple colour screen)
2. Re-flash HardSPL 1.1 from my PC
3. Re-flash original HTC ROM (WWE_3.00.707.18_6275_1.46.30.11_108) by agian putting P3600i into bootloader mode first
I since tried several different radio stacks but haven't noticed any difference in reception so have left the original stack on (1.46.30.11) as it gives the best phone call quality
I love the UI of the latest WM6.5 but if the P3600i doesn't run them properly I'll just have to do without.
Good luck with your own unbricking.
it was working fine for me when i put a little piece of rubber between the processor and the metallic cover of it but after 3 months i have the same problem and the paper dont work anymore.... now when i press the power button the screen is black, only the backlight is working anyone have any ideas what to do?
OMG WTF, as soon as I saw this thread I switched my HTC P3600 on and it started doing it I reckon this is cursed, I will upload a video onto Youtube later and show you that is what happened.
I had this problem myself, didnt know what i was doing wrong, altho my tri color screen did this, not the boot one.
I removed memorycard and voila, everything went smoothly.
edited
sorry 4 my mistake

stuck at white screen

my ba is stuck at white screen. i cannot hard rest because its all was at white screen but my phone do ring but i cannot see any thing plx help
thanx in advance
same problem, please help me !
first i tried to update to windows mobile 6, but it didnt even start then it stucked at boot loader screen, serial/usb V 2.07
then i solved it with mtty but not completely, it stucks now in white screen, and do a ring like 'be-eer' . i re flash with orginal 2003 pda2k firmware, but after a successful flash, it's still stucking at white screen !
wot do u think could it be a hardware prob
i can't really help you about that issue, the only thing i can do is point out a little something for you to look up:
http://forum.xda-developers.com/showthread.php?p=3816258
or:
this is regarding the universal but maybe it contains helpful ideas, what to check
http://forum.xda-developers.com/showthread.php?t=259003&page=3
and just a little bit of my own ideas:
- are you absolutely 100% certain, you are using the gsm model, the blueangel, and not the cdma harrier?
- what rom were you trying to flash, was it a custom made one and did exceed the size limit?
i think these are the most common reasons for being stuck in bootloader besides just bad luck. i feel with you guys, i would be completely helpless in that situation.

Restarting BA

Hi guys,
First thank you all for the instruction in upgrading or modifying BA's
here's my problem,
i was making ah modded battery and follow the instructions also here in this forum, but unfortunately i accedentally switch the polirity of the modded batt, now the problem of my BA is when i connect the battery it will not trun on, when i connect it to cradle, it will turn on and load os after loading it will restart, how can i repair my BA? i read from other threads that the problem might b the power circuit of my BA or something like diods? anyone can help me guys? thanks a bunch and more power to all members and mods of XDA-Developer
thank you

My Kaser is dead :(

I developed ROM. I take to my HTC new ROM. When I restarted kaiser it does not work. When I turn it on now I can see just black screen with text "Smart Mobility". Plese Help me. What can I do now.
vikki said:
I developed ROM. I take to my HTC new ROM. When I restarted kaiser it does not work. When I turn it on now I can see just black screen with text "Smart Mobility". Plese Help me. What can I do now.
Click to expand...
Click to collapse
Try to put into bootloader, press camera and power button and while holding both in, do a soft reset. Once in bootloader, try to flash the original Orange rom.
Is it showing any signs of life at all ?
thanx ... it is wokrking ... thanx a lot
hi
i have htc kaiser 130
it does not work. When I turn it on now I can see just black screen with text "Smart Mobility". Plese Help me. What can I do now
whan i connect wid usp into my pc its connected but active sync is not gren i wana flash but how i have rom and bootloder
also sand me windows mobile 6 for my kaiser phone
plz and tell me how can i istal in2 phone
so that i do plz gave me idea thanks repaly
kashifhafeez said:
i have htc kaiser 130
it does not work. When I turn it on now I can see just black screen with text "Smart Mobility". Plese Help me. What can I do now
whan i connect wid usp into my pc its connected but active sync is not gren i wana flash but how i have rom and bootloder
also sand me windows mobile 6 for my kaiser phone
plz and tell me how can i istal in2 phone
so that i do plz gave me idea thanks repaly
Click to expand...
Click to collapse
No Offense but, Was that even English?
I think I gathered from this, "also sand me windows mobile 6 for my kaiser phone" that you want someone to send you Windows Mobile for your phone. If that's the case, boy, you should read the forum rules. Search Around and guess what? You will Find all types of Windows Mobile 6 ROMs for your Kaiser!

Categories

Resources