These are results of Over clocking CPU to 768 MHZ before and after Clock switch.
How to Over Clock can be found here with instructions:
http://forum.xda-developers.com/showthread.php?t=562112
Video demonstration here:
http://www.youtube.com/watch?v=-Va-44PqD28
More reports
Did you manage to follow the temperature changes?
Any battery drain results (for example Battlog)?
darfri said:
Did you manage to follow the temperature changes?
Any battery drain results (for example Battlog)?
Click to expand...
Click to collapse
Well i ran a hard reset. and installed it again being i had some other tweaks running.
and now im running a full spb benchmark which ill be posting soon.
battery doesn't seem to be a factor and heat has decreased do to the processor doesn't have to work as hard to do simple stuff.
dearmasfamily said:
Well i ran a hard reset. and installed it again being i had some other tweaks running.
and now im running a full spb benchmark which ill be posting soon.
battery doesn't seem to be a factor and heat has decreased do to the processor doesn't have to work as hard to do simple stuff.
Click to expand...
Click to collapse
I did not understand quite well - did you do a hard reset to avoid errors caused by unreliable tweaks previously done or did the overclocking cause trouble to the device that lead to a inevitable hard reset?
darfri said:
I did not understand quite well - did you do a hard reset to avoid errors caused by unreliable tweaks previously done or did the overclocking cause trouble to the device that lead to a inevitable hard reset?
Click to expand...
Click to collapse
No. i did a hard reset to see performance with out tweaks. Over Clocking doesn't cause me to hard reset.
Roger that, sir
Hard worked on graph uploaded
wow this is awesome, but i find it weird how u said that the heat is lower since the processor doesn't have to work as hard to do simple stuff, because if u overclock something, it usually puts strain on it and will therefore create more heat, that's y when u overclock CPUs on ur PC, you have to make sure u have a good cooling system to go with it, but what ur saying is kinda the opposite??
also, can't we do this to custom roms since u said it only works on stock roms?
chaoscreater said:
wow this is awesome, but i find it weird how u said that the heat is lower since the processor doesn't have to work as hard to do simple stuff, because if u overclock something, it usually puts strain on it and will therefore create more heat, that's y when u overclock CPUs on ur PC, you have to make sure u have a good cooling system to go with it, but what ur saying is kinda the opposite??
also, can't we do this to custom roms since u said it only works on stock roms?
Click to expand...
Click to collapse
some can. and a pc and mobile device are differnt
chaoscreater said:
wow this is awesome, but i find it weird how u said that the heat is lower since the processor doesn't have to work as hard to do simple stuff, because if u overclock something, it usually puts strain on it and will therefore create more heat, that's y when u overclock CPUs on ur PC, you have to make sure u have a good cooling system to go with it, but what ur saying is kinda the opposite??
Click to expand...
Click to collapse
Could be wrong, but I've done quite a bit of overclocking of PCs in the past, but nothing too extreme. As I understand it, it's not the overclocking per se that generates most of the increased heat, it's the increase in voltage that people apply to increase the stability of the overclock. By upping the voltage you are causing more juice to flow, and therefore it generates more heat. If you can reach stability by adjusting the multipliers without having to increase the voltage, then not much extra heat is generated.
One thing I have noticed when running this app is that the start point for the overclock has been both 512Mhz, and 384Mhz which implies that there's some sort of CPU throttling happening by default (presumably to conserve battery). On previous devices I've seen this as an option to be turned on/off, but I haven't seen anything of that nature on the Touch Pro. I wonder if it's going to be possible to have something a bit like Pocket Hack Master which changes the CPU overclock based on workload/application. That would give us the best of both worlds - an app that provides the best performance while in use, but minimal effect on battery when not in use.
Cheers,
Steve.
Related
The way overclocking my original Touch helped with the lags due to the TouchFlo cube got me thinking: is it possible to overclock the Diamond beyond 528MHz? I heard before that Qualcomm processors were un-overclockable? Is this still valid? If not, how can I overclock my Diamond and what are the risks?
Blimey, how much hotter do we want the Diamond to get!
Methinks the battery isn't really up to it either...
It is hot but we need to acknowledge that it does lag sometimes.
A better battery is coming out in the near future (1350mAh) so I'm guessing we should consider overclocking.
I think the Processor is plenty fast enough . Its the operating system and a plugin that is causing the lag .
If you run the device without the 3d pluggin its very quick. Its just that the operating system is enhanced to the hardware but the pluggin is not as intergrated so will never run as fast
Count me in on anything that has the word:
Overclocking Like my insanely smoothly running Overclocked Vista Ultimate Machine!
wardy said:
I think the Processor is plenty fast enough . Its the operating system and a plugin that is causing the lag .
If you run the device without the 3d pluggin its very quick. Its just that the operating system is enhanced to the hardware but the pluggin is not as intergrated so will never run as fast
Click to expand...
Click to collapse
I understand that if WM 6.1 runs smoothly on a 201MHz TI-OMAP processor, it will fly on a 528MHz processor. The point is to get TouchFlo3D to integrate that greatly with the remainder of the OS since it is the most appealing feature of the device. I think that upping the processor to say 650MHz would largely facilitate this.
no no no boys I think that more usefull will be underclock processor for better battery life when you didnt need so much performance...automated state will be the BEST!!! so try to think in this direction...
kultus said:
no no no boys I think that more usefull will be underclock processor for better battery life when you didnt need so much performance...automated state will be the BEST!!! so try to think in this direction...
Click to expand...
Click to collapse
I'm waiting for this option as well
is it ppossible to oc the touch diamond? and what program do i need?
i would really like to oc it!!
Bunch of fools :/ Overclocking a phone that already has overheating issues AND battery life issues.
Am I correct in thinking that there are other devices with the same processor running at 400mhz, if so the speed must be scalable? I agree that the diamond is quick already but if the speed was scalable like battery status with the TI omap I had in my old Artemis, then the battery should last longer since usually it would be running underclocked.
i will buy external bat. is there any program for oc touch diamond
kultus said:
no no no boys I think that more usefull will be underclock processor for better battery life when you didnt need so much performance...automated state will be the BEST!!! so try to think in this direction...
Click to expand...
Click to collapse
Valid point. I guess the software that will overclock the Diamond will also allow underclocking so the goal is the same.
ljames28 said:
Bunch of fools :/ Overclocking a phone that already has overheating issues AND battery life issues.
Click to expand...
Click to collapse
An extended battery is on the way and I haven't encountered any overheating issues yet. You better check your facts before calling everyone fools.
Apparently there isn't any such software available given that nobody has made suggestions concerning the availabilty of such software yet.
http://www.batteryupgrade.se/produc...9&PHP5SESSID=fe2844f3866fcfcdecb1881ab80afa2d
1800 mAh battery
so no software for now?
do you think it will be avilable one day?
I hope so but I think the problem is that most Qualcomm processors have fast enough clocks so the incentive for developers to look into the problem isn't that great.
Actually, how much resources are required to develop such an application? We could start raising funds to that end.
mennotheman said:
http://www.batteryupgrade.se/produc...9&PHP5SESSID=fe2844f3866fcfcdecb1881ab80afa2d
1800 mAh battery
Click to expand...
Click to collapse
Yeah. I know about this one but I also heard that GPS doesn't work well when it's on.
mennotheman said:
http://www.batteryupgrade.se/produc...9&PHP5SESSID=fe2844f3866fcfcdecb1881ab80afa2d
1800 mAh battery
Click to expand...
Click to collapse
are you joking I bought Diamond because of dims and weight...If I ll want thick basta*d I ll buy HTC touch Pro muhehe or better stay with my Kaiser
Double post
I could have sworn that the processor in the diamond is UNDERCLOCKED as standard, and does not even run at 528Mhz..
If true, probably a decision to conserve battery since 900mAH is bugger all.
Also, again if this is true, you could probably assume it could at least be clocked to 528Mhz which would speed it up, at least make a difference from what were all used to.
Even with TouchFLO3D disabled, I find the Diamond to be not as responsive as other (much older) WinMo devices, this just does not seem to make any sense. An underclocked CPU would explain a lot of things, IMO.
The question is, how can we find out the truth?
with some software like cpu-z for pc.
are there programs for oc other htc products?
I already overclock and undervolt my Galaxy S running Darky 8.1 with SUpero Optimize Kernel 4_6_8. But I'm not sure that this clock frequency will be safe for my device.
Hi Luke.
First of all i wouldn't recommend it at all.
Why...???
First of all, this is an expensive mobile phone.
When we put custom ROM's inside we are always doing it with a risk to get our phones ''bricked'' or unresponsive.
For example,
i have OC my PC's proccessor and i did it on purpose, but when you OC it,
your proccessor's life-time is decreasing and the question is...how long will it work!
So it's the same thing for SGS, how long will it work and is your proccessor going to get fried up.
So for me now...i'll stick to the darky's custom rom and nothing else.
LukeSP said:
I already overclock and undervolt my Galaxy S running Darky 8.1 with SUpero Optimize Kernel 4_6_8. But I'm not sure that this clock frequency will be safe for my device.
Click to expand...
Click to collapse
Its up to you. I have it OC. Firstly, Overclocking doesnt mean that the processor is going to run at 1.2Ghz all the time. On the contrary, you can govern the speed of your processor and it runs to 1.2Ghz only when it needs to. For example, after using Voltage tool, use SetCpu and there you can set the mode to conservative or on-demand. Go to Info tab and there you can see for how long certain frequency/CPU speed was used and you will see different values are used, not just 1.2Ghz.
As for the safety part, Putting a custom ROM, Rooting etc is already the way your phone is not supposed to be used, risking the life and warranty.
So, it depends how you look at it. I recommend it.
Essence is its up to you and your choice to take the risk involved .
jje
Charlie Wax said:
Hi Luke.
First of all i wouldn't recommend it at all.
Why...???
First of all, this is an expensive mobile phone.
When we put custom ROM's inside we are always doing it with a risk to get our phones ''bricked'' or unresponsive.
For example,
i have OC my PC's proccessor and i did it on purpose, but when you OC it,
your proccessor's life-time is decreasing and the question is...how long will it work!
So it's the same thing for SGS, how long will it work and is your proccessor going to get fried up.
So for me now...i'll stick to the darky's custom rom and nothing else.
Click to expand...
Click to collapse
theres a reason you can overclock a cpu alot more than stock, fans, coolants etc.
a computer chip needs to work whether its in the hottest climate and the coldest and thats why youve got scope to overclock the ass of the cpu if you got the fans , pipes, water blah blah blah
so the cpu overclock and the phone overclock are totaly different
regards
thebazman said:
theres a reason you can overclock a cpu alot more than stock, fans, coolants etc.
a computer chip needs to work whether its in the hottest climate and the coldest and thats why youve got scope to overclock the ass of the cpu if you got the fans , pipes, water blah blah blah
so the cpu overclock and the phone overclock are totaly different
regards
Click to expand...
Click to collapse
So would you be so kind to explain us the differences between those two things...
From my point of view...it is the same thing, the CPU will not always work at full load, as darky once said there is no need for overclocking or dual-core cpu on mobile phones.
The problem is not in the hardware, it's inside the software.
K to the question.
It is relative "safe" if you know how to do it, but not much point of doing it.
I used to have it Overclocked but saw only the slightest difference.
I think you better off with what you are on mate.
Unless you are bored want to try it out
Charlie Wax said:
So would you be so kind to explain us the differences between those two things...
From my point of view...it is the same thing, the CPU will not always work at full load, as darky once said there is no need for overclocking or dual-core cpu on mobile phones.
The problem is not in the hardware, it's inside the software.
Click to expand...
Click to collapse
if you say theres no difference then fine. ive just explained why you can overclock a pc cpu.
a mobile phone processor and its cooling system is different dont you think?
well if someone says dont overclock your pc cause theres no need, would you follow that instruction ?
regards
btw im not saying your better of overclocking or not, its up to the individual to research or read im just pointing out theres a big difference from pc cpu and phone cpu
It depends...on my primary usage of PC.
I'm a photographer, so i need lot of CPU and RAM power, but according to that i have adequate cooling system.
But my point is overclocking is always the same thing, raising your voltage and CPU speed. Mobile phone actually doesn't need OC, the usage of CPU is written inside the program, application, software...you name it.
I agree with you that cooling is different, but c'mon mate, do u really see that big difference.
Charlie Wax said:
It depends...on my primary usage of PC.
I'm a photographer, so i need lot of CPU and RAM power, but according to that i have adequate cooling system.
But my point is overclocking is always the same thing, raising your voltage and CPU speed. Mobile phone actually doesn't need OC, the usage of CPU is written inside the program, application, software...you name it.
I agree with you that cooling is different, but c'mon mate, do u really see that big difference.
Click to expand...
Click to collapse
you keep talking as if iv said ive overclocked my phone , i havnt
i just gave a pov on the differences thats all
regards
I overclocked my SGS to 1.2GHz because of Dungeon Defenders. It was unplayable with many creatures and players. After OC, the difference is huge. No problems with overheating or freezing.
How to OC SGS on Darky's ROM 9.1 with SO Kernel?
Is there any tutorial? Anybody can explain me how to OC to 1.2Ghz?
You can use Galaxy tuner app from market
Sent from my GT-I9000 using XDA App
Overclocking always has risks, except on platforms designed to accommodate it. Don't overclock your phone if you rely on it for everyday use.
I have my phone at 1.3ghz for everyday use. No lagfix, its buttery smooth! I'll never go back.
I don't think its safe
Searching Google for other peoples opinion on this. I have over clocked at times and the difference is small unless you are looking at benchmarks.
I think what people don't realize is that each cpu has an average life span at its given clock speed. When you over clock i can say 100% for certain you are decreasing its life.
The decrease may be so small that the phone is going to be outdated before it dies or it could be great enough that one day in 3 months time your phone just dies and there is not really any way of knowing for sure.
So id say if you are going to over clock just be aware of that as a lot of people seam to think as long as you use profiles and don't let it get over a certain temp its doing no damage =P
martan1981 said:
I overclocked my SGS to 1.2GHz because of Dungeon Defenders. It was unplayable with many creatures and players. After OC, the difference is huge. No problems with overheating or freezing.
Click to expand...
Click to collapse
strange. I have played DD1 & DD2, with standard 1GHz without any problems.
I'm on insanity cm with glitch kernel, @1.4Ghz for everyday use, very smooth, web pages load in a flash, the time it spends at that frequency is tiny, if I was gaming a guide amount I would probably go down to 1.2Ghz to be safe as it would probably warm up a bit, but I monitor everything carefully, time in state, temp, etc........to me it is worth it, but of course there is a risk, but my contract is 2 years, so phone only has to last that, and if it does fry, how are samsung going to know? They will just replace motherboard, and in any event I'm kind of old fashioned, I take responsibility for my mistakes! Do it and enjoy, or don't and forever wonder!
Sent from my GT-I9000 using XDA Premium App
Charlie Wax said:
Hi Luke.
First of all i wouldn't recommend it at all.
Why...???
First of all, this is an expensive mobile phone.
When we put custom ROM's inside we are always doing it with a risk to get our phones ''bricked'' or unresponsive.
For example,
i have OC my PC's proccessor and i did it on purpose, but when you OC it,
your proccessor's life-time is decreasing and the question is...how long will it work!
So it's the same thing for SGS, how long will it work and is your proccessor going to get fried up.
So for me now...i'll stick to the darky's custom rom and nothing else.
Click to expand...
Click to collapse
yeah i agree,i don c the sense of oc,if u c the current market there r phones wiv 1.5ghz,3d chips an all those high fiv hardware.even a 2ghz dual-core is abt to come.the company has given sgs 1ghz ,but neva said its cool to oc it...i had tried oc once but frankly i dint notice any diff..but its as per personnel wish ,if u wanna oc then its right for u....
Its totally safe as long as you don't be ridiculous about it....I.e most people make kernels capable of oc to 1.7ghz but that's just stupid because you'll fry your processor, I'd say Max....1.5ghz.....oh and btw it eats your battery so I suppose theirs good and bad sides to it
Sent from my GT-I9000 using XDA Premium App
Hello people
Is it possible to overclock my laptop's CPU?
alex ainsley said:
Hello people
Is it possible to overclock my laptop's CPU?
Click to expand...
Click to collapse
Way wrong place to ask this. I think.
But yes, depending on brand, etc.
ok sorry where should i ask that ^^ question
Try the off topic forum.
Sent from my Incredible with the XDA Premium App.
Depends what motherbaord and CPU you have
You can OC a laptop, but the thermal cooling won't work well. It's best NOT to do it.
well I've got due core Pentiums, but tell me this... if it's possible to overclock my pc just with some coding, like when your rooting a android phone ?
alex ainsley said:
well I've got due core Pentiums, but tell me this... if it's possible to overclock my pc just with some coding, like when your rooting a android phone ?
Click to expand...
Click to collapse
Yes, you probably can... doesn't mean you should do it. Did I mention it'll kill your CPU faster than you can say gigahertz?
Just google around for the exact model of your CPU and overclocking.
But you shouldn't though.
Ok I don't want to kill my pc so I wont to it.
But if there's a safe way of doing it like doing it with android phones then let me know.
Even what we do with the Androids aren't good. The underclock is there to reduce battery consumption.
Overclocking your processor should be done with extreme caution. The excess heat caused can be fatal to the core and anything around it. The best cooling method is always liquid nitrogen.
real men overclock to the max .
that said , oc is done in the bios 90% of the time and 95% of the lappys wont even have an oc option in the bios
PartTimeLegend said:
Overclocking your processor should be done with extreme caution. The excess heat caused can be fatal to the core and anything around it. The best cooling method is always liquid nitrogen.
Click to expand...
Click to collapse
Right... keep the liquid nitro on your laptop...
Snet from me HTC Dserie using lé XDA app. Excuse typoz.
souljaboy said:
real men overclock to the max .
Click to expand...
Click to collapse
So I should have my phone running at 2Ghz all the time
MacaronyMax said:
So I should have my phone running at 2Ghz all the time
Click to expand...
Click to collapse
well i know i have mine screen on at 1.54g(max) ... but 2ghz .. impressive
souljaboy said:
well i know i have mine screen on at 1.54g(max) ... but 2ghz .. impressive
Click to expand...
Click to collapse
Haha Thanks
I do not see the purpose of overclocking. The phone works fast enough. But if it gets you excited...
SGS
just use setFSB:
http://www13.plala.or.jp/setfsb/
It is possible to overclock any CPU
But the problem with laptop is that usually they run very hot with the stock clock settings,
as soon as you overclock it makes the CPU run faster but Hotter as well and you run the risk of causing permanent damage to your laptop, Best not to do it,
Plus it will greatly reduce battery life
Unscrew the bottom of your laptop, scrap the stock heatsink for a corsair watercooler kit, up the FSB bus until the RAM melts....
...profit!
As title says. Anyone who undervolts, what are your stable voltages? For me I've just gone -27 to all.
Lemagex said:
As title says. Anyone who undervolts, what are your stable voltages? For me I've just gone -27 to all.
Click to expand...
Click to collapse
-27 what? doent make any sense unless you put what the -27 was. -27mV? undervolting would depend on your bin number, the higher your bin, the more you should be able to undervolt. but i dont undervolt at all, since theres no need. undervolting wont really save you battery. if you have issues with heat, it might make it so its less hot, but thats about it.
simms22 said:
-27 what? doent make any sense unless you put what the -27 was. -27mV? undervolting would depend on your bin number, the higher your bin, the more you should be able to undervolt. but i dont undervolt at all, since theres no need. undervolting wont really save you battery. if you have issues with heat, it might make it so its less hot, but thats about it.
Click to expand...
Click to collapse
Binning doesn't really matter. As we have seen in other threads better bins seem to still be limited to undervolting to the same number as lower bins before seeing crashes.
For myself I can run -75 fine, I can game on -60 fine and I can only benchmark on -25.
knitler said:
Binning doesn't really matter. As we have seen in other threads better bins seem to still be limited to undervolting to the same number as lower bins before seeing crashes.
For myself I can run -75 fine, I can game on -60 fine and I can only benchmark on -25.
Click to expand...
Click to collapse
binning does matter, because the starting point will differ, and the amount that can be undervolted will differ. even with that, each phone will differ as well(as some bin 14 wont be able to undervolt as much as other bin 14 for example). but in general, a bin 14 will be able to undervolt much more(on average) than a bin 1.
Hello guys I got some huge problems here.
I recently switched from my Z2 to the Z3+ and actually like the phone but the overheating is insane and especially kills Pokemon Go through CPU throttling, which runs smoothly on my old Z2 .
So far I am on 253, cleaned it up and tried a self modified and the zach beta9 Kernel and and runs quite bad on both. Is heating a lesser issue of 224? I actually do not want to reflash the whole system to 224 just to find out it doesn't get better.
Also is there a way to undervolt/underclock? I can change settings in Kernel Aduitor but I have the feeling the phone doesn't really care.
Help much appreciated - thanks!
Try Zach beta 8 kernel. Limit max cpu frequency by kernel auditor.
Still it's only your Goodluck if your device cools down. It's a bitter truth about this model.
waseemakhtar said:
Try Zach beta 8 kernel. Limit max cpu frequency by kernel auditor.
Still it's only your Goodluck if your device cools down. It's a bitter truth about this model.
Click to expand...
Click to collapse
Do you have a clue whether 224 or 256 make a difference?
I will try beta8 and report back.
Delvius said:
Do you have a clue whether 224 or 256 make a difference?
I will try beta8 and report back.
Click to expand...
Click to collapse
no there was no thermal improvements between these builds, dont flash your system back
but do underclock and tell us the results!
Im also affected by your exact problem
Try this kernel, seems promising. I haven't tried it since it doesnt have twrp.
http://forum.xda-developers.com/xpe...m5z-kernel-t3421630/post67813517#post67813517
Edit: Today I have flashed 256, haven't found any improvement. As per my experience 256 haven't brought any noticable change.
**** posted twice and dont know how to delete
Thank you for the replies!
Tested zach beta8, didn't help. Now I am testing http://forum.xda-developers.com/xperia-z4/orig-development/kernel-om5z-kernel-t3421630/ as suggested and if that doesn't help much also with http://forum.xda-developers.com/xperia-z4/general/kill-overheating-flash-zip-t3421782.
And Stamina Mode helps at least a bit.
Statusreport: It always runs bad. But best at the moment with root patched Stock Kernel (253) and that underclocking zip. Although I think that underclocking doesn't really help at all.
Delvius said:
Statusreport: It always runs bad. But best at the moment with root patched Stock Kernel (253) and that underclocking zip. Although I think that underclocking doesn't really help at all.
Click to expand...
Click to collapse
What are your temps? When does it start to throttle? Done any thermal-conf configuration to allow more heat?
---------- Post added at 21:03 ---------- Previous post was at 20:58 ----------
I know that @Trilliard has a very good and stable cpu governor where he has disabled two of the little and two of the big cores, this helps a lot if you underclock the remaining 4
Here are his files:
http://forum.xda-developers.com/xperia-z4/general/dont-custom-kernels-want-to-avoid-idle-t3409647
UPDATE: Added my edited files used to apply CPU tweaks (cores down clocked to 0.9 and 1.2ghz, two core disabled, tweaked cpu governor, power and others mods) and these files located in etc folder. Replace them and set correct permissions then reboot.
Click to expand...
Click to collapse
bjowol said:
What are your temps? When does it start to throttle? Done any thermal-conf configuration to allow more heat?
---------- Post added at 21:03 ---------- Previous post was at 20:58 ----------
I know that @Trilliard has a very good and stable cpu governor where he has disabled two of the little and two of the big cores, this helps a lot if you underclock the remaining 4
Here are his files:
http://forum.xda-developers.com/xperia-z4/general/dont-custom-kernels-want-to-avoid-idle-t3409647
Click to expand...
Click to collapse
Actually I didn't know about this combination - I will try it thanks!
Do you know about a thermal-conf? Actually never tried one. The phone gets hot indeed but I still think there might be some space before it actually melts.
Delvius said:
Actually I didn't know about this combination - I will try it thanks!
Do you know about a thermal-conf? Actually never tried one. The phone gets hot indeed but I still think there might be some space before it actually melts.
Click to expand...
Click to collapse
Thats what i thought as well i have my own here, its based on another persos post, but i dont remember where...
Anyways, his camera mod worked, but cpu throttle was not tampered with, and it caused a very unbalanced throttling... Ok yay i can use the camera linger and fluently, but when i exit the camera app, i cant use the phone couse its runnig at 348 mhz...
So i i did some modifications to it cpu never get under 840 for little cores, so your phones menues end web browsing are always safe from performance drops.
I made it to be able to play Pokemon go, and achieved a lot better resault than without any changes.. still prefer playing on my shield tablet, but if i dont have it around when theres a lot od pokestops nearby, then this will work for me.
While playing Pokemon go it does not go over 80 degrees, but using snapshat it can get to 85, so dont use snap for to long
Let me know if it worked for you!
bjowol said:
Thats what i thought as well i have my own here, its based on another persos post, but i dont remember where...
Anyways, his camera mod worked, but cpu throttle was not tampered with, and it caused a very unbalanced throttling... Ok yay i can use the camera linger and fluently, but when i exit the camera app, i cant use the phone couse its runnig at 348 mhz...
So i i did some modifications to it cpu never get under 840 for little cores, so your phones menues end web browsing are always safe from performance drops.
I made it to be able to play Pokemon go, and achieved a lot better resault than without any changes.. still prefer playing on my shield tablet, but if i dont have it around when theres a lot od pokestops nearby, then this will work for me.
While playing Pokemon go it does not go over 80 degrees, but using snapshat it can get to 85, so dont use snap for to long
Let me know if it worked for you!
Click to expand...
Click to collapse
Oh nice! Thank you a lot! I will totally try it out directly when PTC comes back alive. X)
What kernel and governors do you use?
Delvius said:
Oh nice! Thank you a lot! I will totally try it out directly when PTC comes back alive. X)
What kernel and governors do you use?
Click to expand...
Click to collapse
Im using stock kernel, may switch to another soon. Im using stock bcause of batterylife and idle power consumption
Im using the governor and cpu modifications in this post ; http://forum.xda-developers.com/xperia-z4/general/dont-custom-kernels-want-to-avoid-idle-t3409647
Hmm. Still runs ****ty.
Can anyone give me a short guide how to edit thermal and governors?
According to my observations the phone gets hot and then cold. I think the throttle is more aggressive and needed and I want to make it less aggressive.
Update:
I made my own modifications to the thermal engine. It is pretty bad for battery I guess but I had a very good expierence playing Pokemon Go with it today. Yes the phone gets hot. Like it doesn't drop below 70°C while playing and regulary hits 80°C but it works good. No dark screen, no 0 CPUs downclocking. So far it's fine for me, maybe I get squeeze even more out of it.
Delvius said:
Update:
I made my own modifications to the thermal engine. It is pretty bad for battery I guess but I had a very good expierence playing Pokemon Go with it today. Yes the phone gets hot. Like it doesn't drop below 70°C while playing and regulary hits 80°C but it works good. No dark screen, no 0 CPUs downclocking. So far it's fine for me, maybe I get squeeze even more out of it.
Click to expand...
Click to collapse
Done any other modifications to your file for a while? Or is it working good for you now? What's your SoT?
bjowol said:
Done any other modifications to your file for a while? Or is it working good for you now? What's your SoT?
Click to expand...
Click to collapse
Still working good for me. Not sure if I can really squeeze out more and as long as it works at the moment I do not have a good motivation to try anything else.
No idea about SoT. Always running around with a powerbank. Probably bad, it is not designed for good battery life.
Delvius said:
Still working good for me. Not sure if I can really squeeze out more and as long as it works at the moment I do not have a good motivation to try anything else.
No idea about SoT. Always running around with a powerbank. Probably bad, it is not designed for good battery life.
Click to expand...
Click to collapse
Allright thanks i might try your conf if i cant get mine to work like I want