Updating ROM problem - XPERIA X1 ROM Development

Hello,
I have problem with updating ROM on my Xperia buyed in T-mobile (Croatia). I made backup of my ROM, and when I tryed apply new ROM over storage card without PC (holding VOL DOWN + PWR button), first it shown display in few colors, and then it wrote "loading..." and he never loads anything
When I try put up ROM over Windows program (CustomRUU) turns off my mobile, then it show screen in few colors, connect with USB, and show next screen with progress uploading ROM, but he doesn`t want upload, progres bar stays on 0% and after minute windows update program wrote an error with connection
Do You know meaby what is the problem?
BR
Ivan

Related

Heelp.. dead and I cant even run in USB mode

Hi,
I have a k-jam and I was trying to update it to the custom ROM. it hanged at 98% and the update software crashed on my PC so I had nothing to do but soft resetting the device.
Now I cant restore to the original imate ROM and when I try to go to the USB mode it gives the colored screen and goes off immediately.
Please help...
hey i have had that problem stuck for 2 days, must be stressing eh?
hold camera + voice then push reset button for 3 seconds...keep holding the cam and voice button and wait for the screen to come on..then plug in.... usb shud show on bottom left..
i had that problem....couldnt get it to boot loader but after numerious tries, it worked.
It just needed some power
Wizard was totally discharged i recharged it and restored the ROM successfully
thank u

Splash Screen Stuck Fix

Was asked to re-post in upgrading and wm6
I had my 8125 flash a bad rom and was stuck on splash screen.
fixed it with mtty1.42
connect in bootloader mode with usb
choose usb connection not com1, or com2
you will get a white screen press enter
then you see cmd>
type format will show you what you can format
you want to format the os part starts with a b cant remember exactly
once its formated flash a rom and you should be good to go if you have any questions just let me know.
I dont have the option for USB.. just COM1 and COM2
Please advise??
Have the same problem. I'm running Vista. Do I need XP to do this?
or, is it possible to flash via MiniSD?
Then you probably have active sync on turn if off and disable it so when you plug in the usb cable it doesnt automatically come up.
Sorry took so long to get back
I had the same problem when i've flashed the black diamond wm6.1 rom, but all i had to do is to turn the device into bl mode (camera key + power key) and then reflash it..
If that wont work for me again ill give your tip a try. thanks!

Diamond doesn't start

My HTC Touch Diamond jammed so I turned it off and then tried to turn it on again. But it stuck on the HTC logo and won't continue. I tried to pull out the battery for a few minutes, I pulled I the SIM, nothing works. It won't start, but it can partially connect to PC via ActiveSync: The synchronization can't be performed, but I can access data on the device.
Is there any way to fix it?
I'm using Cloudy ROM 1.2 and radio 1.00.25.05.
Try to flash a new ROM !!!
- Turn off the phone
- connect the Usb cable
- Press and hold the volume down button
- power on the phone
- If everthing works you will see color stripes
- if you can read USB in the bottom stripe your Diamond is ready to be flashed
I think its the only way out !!!!!
I didn't want to wait any longer, so I performed hard reset and restored system data from backup file (I lost, of course some setting and I will have to install some recently installed programs again, but what can you do )

NEED HELP!!! After ROM update screen is black!

Hi,
After my first update ever my phone crashes!
First I installed X1_hardspl succesfully.
Then I installed Christian_NL_5419_Full.
Then the phone reboots succesfully. It installed the customized items automatically. Then it reboots again. You see the Xperia logo and then the screen turns into black!
How can I fix it? Please help me!
Mark
Reflash your ROM. Get to tricoloured screen by holding the camera button down and press power button. Hold both buttons down until you see tricoloured screen. Connect usb and flash if using RUU.
maybe hard reset is sufficient, though w/o sd card or if there's an option w/o auto instll of customziation
did you check christian's thread up front for reports of similar experiences? rom specific questions are best asked in the specific rom thread, there's where all feedback accumulates- good and bad...
gl

HELP: Stuck on sony screen after installing ROM

edit: fixed it, just flashed a stock FTF, i'll dot the whole process again later on and hope this time it works out
You can close teh thread (i've tried to delete it but can't find the option)
I've just checked that I can boot my phone and recovery works. But for instance when i try to put service mode it gives an error with IMEI
edit: i've booted to the other recovery (using volume up) and installed the pre-rooted FW again. Shut down and tried again the flashmode process but still no luck, red and quick green light. After booting the phone, it seems to work basically, but wifi not working, it doesn't turn on.
What should the next step be?
The computer does not recognize the phone when my connect it to the USB port, not even charge. The only thing that happens is a flash of red light then green light. Same thing if phone is shut down when i connect the usb cable, red flash, then sony screen appears, then green light, and finally it vibrates two times before showing the level of battery, but without actually charging it.
Anf if i try a Vol Down+Power when in standby and connect with usb cable, it shows a quick red then green flash, and then nothing.
Ok i fixed that problem apparently the USB cable decided to stop working...
Now i have another problem as I decided to install the deodexed ROM and now my phone gets stuck at the sony screen and i can't even boot to recovery.
What i did to install:
Boot to recovery using Volume Up (PhilZ)
Prepare to install new rom (which formats Data, cache, etc)
Install ROM form SDcard1
Everything went fine but at the end it says "root lost or something" I put yes, then rebooted to system, and got stuck on sony screen....
What did i do wrong and how to fix it??
Thanks for the help!

Categories

Resources