Database Develop

Heelp.. dead and I cant even run in USB mode

Hi,
I have a k-jam and I was trying to update it to the custom ROM. it hanged at 98% and the update software crashed on my PC so I had nothing to do but soft resetting the device.
Now I cant restore to the original imate ROM and when I try to go to the USB mode it gives the colored screen and goes off immediately.
Please help...

hey i have had that problem stuck for 2 days, must be stressing eh?
hold camera + voice then push reset button for 3 seconds...keep holding the cam and voice button and wait for the screen to come on..then plug in.... usb shud show on bottom left..
i had that problem....couldnt get it to boot loader but after numerious tries, it worked.

It just needed some power
Wizard was totally discharged i recharged it and restored the ROM successfully
thank u

Bricked my Diamond any Fix?

Hello
today i installed an application from untrusted source and it bricked my HTC touch diamond
it gets stock for 5 mins on the htc logo screen then displays "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source, Press SEND to reset your device or press any other button to cancel, this operation will delete all your personal data and restore the device to its factory default settings."
i pressed all the buttons on my diamond but none works.
i would really be grateful if anyone helps me to fix my HTC (without erasing all the data if possible)
thanks for your time

have you tried a hard reset?

I can Hard reset it but is there any other way to fix it without losing the data or any way to copy the data to my PC while the device is bricked?
thanks

If you are able to reset your phone via a hard reset, it is not bricked. Backup people!

back up..........
and back up again

chribruu said:
If you are able to reset your phone via a hard reset, it is not bricked. Backup people!
Click to expand...
Click to collapse
Whats the best way to back up?
Thanks

I'd recommend SKKV tols along with PPC PIM backup (don't forget about your registry.
you can find a lot of freeware backup apps over at freewareppc

Resco Backup is awesome if you don't mind paying a few bucks... How much is your valuable data worth to you?

I fixed my device thanks a lot for your help everyone!

adwinp said:
I'd recommend SKKV tols along with PPC PIM backup (don't forget about your registry.
you can find a lot of freeware backup apps over at freewareppc
Click to expand...
Click to collapse
how can i backup the phone when it cannot estabilish connection with activesynch?
i did some egistry fauts, now the phone boots up, but there is just balck creen ant the start button, the phone button and the batert/network button
when i tpa on start button only appears the progrma section, when i tap on it nothing happens...
the biggest problem that ii cannot make a connection between the pc and the diamond...
what shuold i do to fix the problem?

You can enter the bootloader and connect it via USB there.
Enter + up on volume + stylus should enter a tri-color screen.

intx said:
You can enter the bootloader and connect it via USB there.
Enter + up on volume + stylus should enter a tri-color screen.
Click to expand...
Click to collapse
what is the enter in this case?
soft reset or the power button, or the round button which i use for taking pics?

i got to the bootloader, there is the tricolor/4colour/ screen, red green blue and white,
in the red writes daim100 mfg64m
spl+1.40. Olinex
MicroP-Diam (led) v11
in the green field
fsoc-diam stage_pvt v0x32
blue field is blank
in the white field it writes> usb
but i cannot connect tothe pc, so dont have activesynch and cbbot flash the ppc...

PROBLEM SOLVED
http://forum.xda-developers.com/showthread.php?p=3251939#post3251939 #23

HELP in Upgrading, my BA cannot be detected

Hi guys. I'm really new to BA upgrading. I have purchased an O2 XDA IIs thru Ebay and would want to upgrade it from its current WM 6.1 to WM 6.5 OS.
The problem is, I cannot sync thru Activesync, everytime I insert my device thru its USB cable it says "USB Device not recognized".
I also have an O2 XDA II and it does not have any problem syncing.
I have already tried every USB port of my PC and all displayed the same situations.
I'm using Activesync 4.5 and I have tried upgrading it and since its not even "recognized" in the end the upgrade tool would say "The ROM upgrade kit is not designed for my device".
I can put it in Bootloader Mode and it says "USB" mode everytime I connect the data cable to my PC.
Another problem I think is that I cannot do a HARD RESET. I mean I can put it in HARD RESET Mode where it asks me to choose YES or NO on 3 options, somehow, I cannot go beyond that. I dont know which button to press to activate the reset. I mean, I tried every button but no hard reset happens.
Guys I know you can help me on this. I think I'm gonna need your "divine influences" on this matter. Cheers.

if you are running vista OS or above, please refer to the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista
to perform a hard reset
1. hold down power button + press soft-reset
2. immediately, hold down Power + Record + Camera buttons
3. Option 1 - No, 2 - Yes, 3 - Yes
4. Press Mail button
PS: please take out the SD card when during the flashing process.

X1 Can't renew Custom Firmware?

Hi. I had an issue with my X1. I've already done the hardspl and the setup of the Walkyrie V5 a long time ago...
Yet i want to update my rom and i do the volume down + start button to have the canari mode... > But nothing . It works before !
I'll try to redo a hard spl , my phone reboot and i have a "loading" and nothing too.. And a connection error on my pc. But the usb cable is ok...
Help please...

I will be stating the obvious, simply because the littlest things may be overlook.
-Make sure your battery is charged more than 50%
-It is suggested to Task 29 before you install another rom
-Format memory card to FAT 32 and place the renamed rom into it and unplug USB cord
-Make sure phone is off, then Hold Volume Down + Power Button to boot tri-color screen
I think thats it o_o

HELP: Stuck on sony screen after installing ROM

edit: fixed it, just flashed a stock FTF, i'll dot the whole process again later on and hope this time it works out
You can close teh thread (i've tried to delete it but can't find the option)

I've just checked that I can boot my phone and recovery works. But for instance when i try to put service mode it gives an error with IMEI
edit: i've booted to the other recovery (using volume up) and installed the pre-rooted FW again. Shut down and tried again the flashmode process but still no luck, red and quick green light. After booting the phone, it seems to work basically, but wifi not working, it doesn't turn on.
What should the next step be?
The computer does not recognize the phone when my connect it to the USB port, not even charge. The only thing that happens is a flash of red light then green light. Same thing if phone is shut down when i connect the usb cable, red flash, then sony screen appears, then green light, and finally it vibrates two times before showing the level of battery, but without actually charging it.
Anf if i try a Vol Down+Power when in standby and connect with usb cable, it shows a quick red then green flash, and then nothing.

Ok i fixed that problem apparently the USB cable decided to stop working...
Now i have another problem as I decided to install the deodexed ROM and now my phone gets stuck at the sony screen and i can't even boot to recovery.
What i did to install:
Boot to recovery using Volume Up (PhilZ)
Prepare to install new rom (which formats Data, cache, etc)
Install ROM form SDcard1
Everything went fine but at the end it says "root lost or something" I put yes, then rebooted to system, and got stuck on sony screen....
What did i do wrong and how to fix it??
Thanks for the help!