Related
Please,help me as soon as possible -about get out a boot mode.
Situation-i was trying to flash one of Radios from that tread (as always),my Xperia is Hard-Spl,i was renamed downloaded file to Kovsimg.nbh, copy that to the root of MicroSD card,then turn Xperia in bootload mode (4 color bars) (you know-vol. button and on simultan),the file was recognized,i got the message (as always) "press power button to flash ROM or action button to cancel",i pressed power button, flashing begann and was already on 100%, but then was coming an Error message-"Flash not complete and some about RSA too".I take akku out and put in again,and now-don't matte how i turn Xperia ON,it always go to Bootload mode and want to flash that file (and it will not flashed).How i can get out now of that bootload mode???????I read "press Action button to cancel flashing",but what is that Action Button???And if i even take out MicroSD,Xperia start always in bootload and want to flash something!!!!I sit down in Hotel now,i don't have a MicroSD cardreader to copy on MicroSD another file,and i can't use my telephone,because it start always in that 4 color bootload mode and want to flash something!!!
Ple-e-e-a-a-se Help!!!! I don't want to hard reset my telephone now,i just want to start Xperia in normal mode.
Many many thanks in advance,
Valery
P.S.Sorry for my English-it's not good and now especially i'm totally nervous with that problem...
Action button is the middle of the optical joypad.
to reflash connect from your computer with a USB cable and use the Custom Radio RUU
AND DO NOT GO AROUND FLASHING THINGS UNLESS YOU KNOW WHAT YOU ARE DOING!
Thanks a lot for fast response!!!
I was flashing one of the Radio ROMs here in the thread,that was in the list as worked, maybe it was transfer failure to MicroSD card,now it don't matter.
I power now Xperia on, then see that 4-color screen,then now i see kovsimg.nbh- RADIO and "Press power button to start update image" and "Press action button to cancel update image". If i press the middle of optical joystick-as you said-then it happens nothing-i see the same screen...What schould i do????
This is the "n" time I write this:
Remove and reinsert battery
Turn phone on
Now you are out of bootloader
Thank you Gtrab for answer,
but it is what i mean and what is strange-i remove battery,reinsert it,push only On button,and i'm again in boot mode....Very strange,yes???
ValVK said:
Thank you Gtrab for answer,
but it is what i mean and what is strange-i remove battery,reinsert it,push only On button,and i'm again in boot mode....Very strange,yes???
Click to expand...
Click to collapse
Strange for you, but well known phenomena: your flash didn't complete
You'll have to flash again from a PC or by copying a new radio file to your microSD card, or you can use "mtty"... sorry there's no other way but reaching a PC
I have notebook here,but i can't connect to my phone,because it start always in boot mode.Is here some method to connect to phone without Active synch in that bootloader mode???I understand now-i must copy right file on my MicroSD card,how i can do it wothout MicroSD Cardreader and only with a phone starting in boot mode???
Thank you,
Valery
ValVK said:
Is here some method to connect to phone without Active synch in that bootloader mode???I understand now-i must copy right file on my MicroSD card,how i can do it wothout MicroSD Cardreader and only with a phone starting in boot mode???
Click to expand...
Click to collapse
you can't access the sd-card without a Cardreader but you dont have to. In the 4-color screen you should see the text "USB" when you connect the phone to the pc (as far as I remember, when the device is not connected to the pc instad of "USB" the text is "SERIAL"). In that mode you can use the RUU to update your device.
Mastermarv,
thank you very much!!!I was worked for me-i was using RUU Radio utilities in bootloader mode and flashed orig. Radio ROM-now it all started OK and all work again!!!!!Uf-f-f,so one "abenteuer"...
Thank you all the people,those tried to help me in this situation,much appreciated your help!!!!
Now i can some relax...
Valery
ValVK said:
Please,help me as soon as possible -about get out a boot mode.
Situation-i was trying to flash one of Radios from that tread (as always),my Xperia is Hard-Spl,i was renamed downloaded file to Kovsimg.nbh, copy that to the root of MicroSD card,then turn Xperia in bootload mode (4 color bars) (you know-vol. button and on simultan),the file was recognized,i got the message (as always) "press power button to flash ROM or action button to cancel",i pressed power button, flashing begann and was already on 100%, but then was coming an Error message-"Flash not complete and some about RSA too".I take akku out and put in again,and now-don't matte how i turn Xperia ON,it always go to Bootload mode and want to flash that file (and it will not flashed).How i can get out now of that bootload mode???????I read "press Action button to cancel flashing",but what is that Action Button???And if i even take out MicroSD,Xperia start always in bootload and want to flash something!!!!I sit down in Hotel now,i don't have a MicroSD cardreader to copy on MicroSD another file,and i can't use my telephone,because it start always in that 4 color bootload mode and want to flash something!!!
Ple-e-e-a-a-se Help!!!! I don't want to hard reset my telephone now,i just want to start Xperia in normal mode.
Many many thanks in advance,
Valery
P.S.Sorry for my English-it's not good and now especially i'm totally nervous with that problem...
Click to expand...
Click to collapse
I have the same problem! i can't even connect it to my pc cuz it doesn't recognize the phone... it's been stuck at the white " KOVSIMG.nbh - OS - Update in progress...." screen for more than 10 mins now. but it's 100%. I tried hard & soft reset, taking out the battery, and powering it on again , but it still goes back to this screen. please help me... thanks in advance
I just had to Hard SPLW my ROM. In order to put a new one on: http://forum.xda-developers.com/showthread.php?p=3576661&posted=1#post3576661
Right now, the screen shows:
Smart Mobility
And the little red loading things on bottom right... its been stuck like that..
HELP!
Hello.
I'm sorry to hear about your problems. Having put the new hard spl on there, I would recommend loading a rom on there of your Choice. I recommend either Daviddeuck, or Dutty as your starting point. So.
Go to the wiki, read carefully about how to load the rom on there (very similar to hard spling your phone) and follow the steps to loading a rom on there.
Let me know how it goes, and good hope to you.
Caid.
edit.
I was going to post a link, here's a better suggestion.
I'll just tell you what to do.
Download a rom, it should come with the installer.
Make sure your phone is charged up. If you've left it plugged in till the light on the power button is green, it should be full (I know you can't check the meter in windows as windows isn't loading).
Once it's charged, run the installer that came with your downloaded rom of choice.
Make sure your phone is connected to your computer through USB, and that it is on.
If windows mobile center recognizes your phone, that's even better.
Now that you're all set up and you have the installer loaded, follow the steps indicated by the installer. Wait for the installer bar to finish and the phone to reboot.
If you can't load the rom on your phone this way, you can put the rom onto an SD card (into the main directory of the card, not into any folder), then you can hold the volume down button on your phone and press and hold the power button. The phone should boot into a red blue and green screen. It will ask you if you want to upgrade the rom, press volume up to begin, and wait for it to finish.
Once again, make sure your battery is charged.
The memory card method is the easiest method to updating your phone, although I usually use the first method myself. If windows isn't loading on your phone, you may be unable to do that, so try the memory card method.
Summary.
Put the rom on your memory card, in the main folder.
Press and hold the volume down button, and the power button.
Phone will boot into a three coloured screen(red blue green).
Press volume up to begin update.
Let the install finish.
Don't turn off your phone while it's updating.
Wait for it to reboot and load.
Good hope to you.
Caid.
My HTC Touch Diamond jammed so I turned it off and then tried to turn it on again. But it stuck on the HTC logo and won't continue. I tried to pull out the battery for a few minutes, I pulled I the SIM, nothing works. It won't start, but it can partially connect to PC via ActiveSync: The synchronization can't be performed, but I can access data on the device.
Is there any way to fix it?
I'm using Cloudy ROM 1.2 and radio 1.00.25.05.
Try to flash a new ROM !!!
- Turn off the phone
- connect the Usb cable
- Press and hold the volume down button
- power on the phone
- If everthing works you will see color stripes
- if you can read USB in the bottom stripe your Diamond is ready to be flashed
I think its the only way out !!!!!
I didn't want to wait any longer, so I performed hard reset and restored system data from backup file (I lost, of course some setting and I will have to install some recently installed programs again, but what can you do )
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Remove your Micro SD-CARD, and enter in flash mode! Volume down + power on!
Open the Update Phone Utility with the rom of your choice! Remember to rename your rom to: KOVSIMG.nbh
Sorry for English.
Faffa_mcr said:
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Click to expand...
Click to collapse
first time u must delete first the previous version on ur sd card... than u can update the new one... and dont forget to tasks 29 before u flash the rom...
Sorry guys, but when I enter in flash mode, and I press the power button and it should load the ROM, instead it always restart after 2-3 second. I don't know what to do..please help me!!
It sounds to me that you're not holding the buttons down correctly
paul c said:
It sounds to me that you're not holding the buttons down correctly
Click to expand...
Click to collapse
I tried again, but the result is the same.. uff..
hardspl
Faffa_mcr said:
I tried again, but the result is the same.. uff..
Click to expand...
Click to collapse
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
ahmadin said:
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
Click to expand...
Click to collapse
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
I looked that the power button have a red light, and when this turn off, it go to bootloader mode, but after few second (it's in update mode) the phone turn off..
Someone has the same problem? I don't know what to do, I'm desperate! I can't use my phone
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Faffa_mcr said:
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
Click to expand...
Click to collapse
did you try another usb port of PC?
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
orkhanahmadov said:
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Click to expand...
Click to collapse
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
Very good explaination....
Faffa_mcr said:
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
Click to expand...
Click to collapse
did you try method that wrote first.
and off course try another usb port, or another usb cable.
because if the phone did'nt recognized by PC, it means there's problem with cable or usb port if other things are OK.
I’ve flashed my phone many times before, but this was my first time using MTTY and I’ve ****ED UP. I don't think the problem is from MTTY, that’s why I’m posting this under general section, so please keep reading.
From The DEFINITIVE MTTY Thread (Flashing From USB):
5c: type "task 29" to get your device formatted
5d: type "task 8" to ask your device reboot
6: Immediately DISCONNECT your device then Press and Hold Vol Down to bring the device back to bootloader and connect to USB.
7: Run ROM Flasher and flash via USB. After rom flash is completed Hard-reset (Pen Reset, then Press and Hold Vol Down and Circle) then allow the ROM to boot.
I have successfully completed step 6 but I got confused at step 7, so I decided to read some more documentation. As far as I know, keeping the device in bootloader mode does not charge the battery (the light circle does not blink) so I removed the battery in order to keep it from discharging (power button did not work), thinking I could power on the device later and connect it in bootloader mode again. Boy was I wrong. The phone is completely dead now.
Do i have a new piece of furniture? Thanks and sorry for my english.
blitz13 said:
I’ve flashed my phone many times before, but this was my first time using MTTY and I’ve ****ED UP. I don't think the problem is from MTTY, that’s why I’m posting this under general section, so please keep reading.
From The DEFINITIVE MTTY Thread (Flashing From USB):
5c: type "task 29" to get your device formatted
5d: type "task 8" to ask your device reboot
6: Immediately DISCONNECT your device then Press and Hold Vol Down to bring the device back to bootloader and connect to USB.
7: Run ROM Flasher and flash via USB. After rom flash is completed Hard-reset (Pen Reset, then Press and Hold Vol Down and Circle) then allow the ROM to boot.
I have successfully completed step 6 but I got confused at step 7, so I decided to read some more documentation. As far as I know, keeping the device in bootloader mode does not charge the battery (the light circle does not blink) so I removed the battery in order to keep it from discharging (power button did not work), thinking I could power on the device later and connect it in bootloader mode again. Boy was I wrong. The phone is completely dead now.
Do i have a new piece of furniture? Thanks and sorry for my english.
Click to expand...
Click to collapse
make sure the battery is fully charged after that put the batteries in the device, then make the device go to bootloader with Press + Hold Vol Down and connect to USB so you can resume back to Flash ROM
Good luck blitz13
Hakim Rahman said:
make sure the battery is fully charged after that put the batteries in the device, then make the device go to bootloader with Press + Hold Vol Down and connect to USB so you can resume back to Flash ROM
Good luck blitz13
Click to expand...
Click to collapse
Thanks for your answer Hakim. I left the battery in the fridge overnight and managed to bring the phone back to life just enough to do a quick flash.
Phew