Hey guys I want to go from cyanogen mod to kings hero..I've searched and read threads, bhut I still have questions...I am on CM 4.1.11.1 I have hard spl...I have a 512 mb I think it's a ext 2 parttition, but I'm not 100% sure...
1. Do I need to format my ext and my sd card before installing the new radio and spl?
2. what's the simplest way to add a linux swap partition and shoukld this be done before or after installing kings hero?3. Is there anythiing else I'm missing here?
Here, I think these two threads will help you a lot:
"Want to Run Hero?" http://forum.xda-developers.com/showthread.php?t=534461
"manual partition of sdcard" http://forum.xda-developers.com/showthread.php?t=534714
You don't have to do anything with your partitions to flash the radio and danger spl, and you should make a linux swap partition before you run a hero rom.
tee aiy emm said:
Here, I think these two threads will help you a lot:
"Want to Run Hero?" http://forum.xda-developers.com/showthread.php?t=534461
"manual partition of sdcard" http://forum.xda-developers.com/showthread.php?t=534714
You don't have to do anything with your partitions to flash the radio and danger spl, and you should make a linux swap partition before you run a hero rom.
Click to expand...
Click to collapse
I am planning on installing king's hero btw...I have read both of those guides... What I still don't understand is, how to I make a 96 MB linux swap..do i wipe first and format my sd card and ext partition? if so, how? ALso, should i install the radio, then linux swap, then rom then spl? if not what order..thank you very much!
Read the partition guide. The only order you need to be sure of is you flash the radio before spl.
Related
guys i need a bit of help..
I had rooted my HTC Dream, plus latest radio and SPL.
Then I flashed to JF's 1.51 rom..i have yet to upgrade to the latest hayo SPL.
I wanna try out Dude's cupcake or ramjet's rom..
I need to know if I have to partition my SD card to ext3 first before flashing? Can it be done without converting it to ext 3? or leave it as fat32?
However i don't understand what is ext2 /ext3 to SD.
What is it? the defaults = ext2?
how do i partition it to ext3?
So after flashing all apps would be install automatically to the sd card?
mgear356 said:
guys i need a bit of help..
I had rooted my HTC Dream, plus latest radio and SPL.
Then I flashed to JF's 1.51 rom..i have yet to upgrade to the latest hayo SPL.
I wanna try out Dude's cupcake or ramjet's rom..
I need to know if I have to partition my SD card to ext3 first before flashing? Can it be done without converting it to ext 3? or leave it as fat32?
However i don't understand what is ext2 /ext3 to SD.
What is it? the defaults = ext2?
how do i partition it to ext3?
So after flashing all apps would be install automatically to the sd card?
Click to expand...
Click to collapse
The only time you will need a ext2 or ext3 partition is if you are going to do apps2sd. If you do you need to partitions either ext2 or ext3 and fat32. Use ubuntu to create the partitions. There are a ton of threads covering all this.
Thank you sir..
However is there any way other than a utbunu os? Can it be done with winxp?
Can I install ramjets rom without app2sd?
I am confused with abn app with terminal wats that?
So I presume ext2/3 is a linux partition and I did to have that in order for apps2sd to work?
mgear356 said:
Thank you sir..
However is there any way other than a utbunu os? Can it be done with winxp?
Can I install ramjets rom without app2sd?
I am confused with abn app with terminal wats that?
So I presume ext2/3 is a linux partition and I did to have that in order for apps2sd to work?
Click to expand...
Click to collapse
There is other ways. But you can run ubuntu as a live cd without having to install anything. But if you don't want to use that then there is paragon which you can use on winxp. Also there are scripts to run which will create a partition for you but me personally i would want to format it myself. You don't need apps2sd for ramjets rom, but if you do have your card partitioned (needs ext3) it should do everything for you. Don't really understand when you said your confused with abn app with terminal. If your talking about terminal emulator, that is a place where you can run commands like adb.
Hey, I just wanted to confirm that I will be taking all of the proper steps in putting CyanogenMod 3.6.8.1. Here's what I will be doing (I'm going to start from complete scratch - figured it would help a bit):
CURRENTLY ON JF1.51 CRB43
-------------------------------
Repartitioning 8GB Class 4 card with 700MB Ext2
Reverting back to RC29 via DREAIMG.nhb
Flashing recovery image in terminal
Installing HardSPL through recovery console
Installing JF1.51 ROM (Heard its smart to do this first)
Installing HTC Radio from http://www.htc.com/www/support/android/adp.html
Installing Cyanogen Recovery Console
Flashing CyanogenMod 3.6.8.1 ROM
Recovery console: upgrade_fs (EXT2 -> EXT3)
-----------------------
QUESTIONS THAT I HAVE
-----------------------
Will this ROM smoothly support the modified Rosie.apk from
http://forum.xda-developers.com/showthread.php?t=532822 ?
Am I correct in assuming I do not need to install the Haykuro SPL?
Should I use Compcache from http://forum.xda-developers.com/showthread.php?t=537236 ? I have no experience whatsoever with swap files
Am I correct in assuming that I do not need to manually set up Apps2SD?
And most importantly: DID I MISS ANY CRUCIAL STEPS THAT I WILL REGRET DOWN THE LINE? Dont believe so, but better safe than sorry!!
Thanks every so much!!!!!!!!!!!
Oh, I will be using Paragon Partition manager to partition MicroSD card if that makes a difference
you shouldnt have to redo all the steps. just wipe and flash his rom. also to my knowledge rosie will not run on a non-hero rom. you do not need haykuro's spl. i have put cm rom on phones straight from rc-29 with no problems. i do not know how to use paragon, but it is very easy to partition an sdcard through cyanogens 1.3.1 recovery. apps2sd is automatic with his rom. if it feels slow you can use compache but do not have to if you do not feel you need to. if you do want to go through the steps you have listed then you are set. hope i was able to answer some of your questions
Your ext2 partition is really large. 500MB should be well enough.
torturedsoul802 said:
Hey, I just wanted to confirm that I will be taking all of the proper steps in putting CyanogenMod 3.6.8.1. Here's what I will be doing (I'm going to start from complete scratch - figured it would help a bit):
CURRENTLY ON JF1.51 CRB43
-------------------------------
Repartitioning 8GB Class 4 card with 700MB Ext2
Reverting back to RC29 via DREAIMG.nhb
Flashing recovery image in terminal
Installing HardSPL through recovery console
Installing JF1.51 ROM (Heard its smart to do this first)
Installing HTC Radio from http://www.htc.com/www/support/android/adp.html
Installing Cyanogen Recovery Console
Flashing CyanogenMod 3.6.8.1 ROM
Recovery console: upgrade_fs (EXT2 -> EXT3)
-----------------------
QUESTIONS THAT I HAVE
-----------------------
Will this ROM smoothly support the modified Rosie.apk from
http://forum.xda-developers.com/showthread.php?t=532822 ?
Am I correct in assuming I do not need to install the Haykuro SPL?
Should I use Compcache from http://forum.xda-developers.com/showthread.php?t=537236 ? I have no experience whatsoever with swap files
Am I correct in assuming that I do not need to manually set up Apps2SD?
And most importantly: DID I MISS ANY CRUCIAL STEPS THAT I WILL REGRET DOWN THE LINE? Dont believe so, but better safe than sorry!!
Thanks every so much!!!!!!!!!!!
Click to expand...
Click to collapse
It sounds like you are coming from a brand new g1. If you already have root i wouldnt go back to RC29. And really dont see a point in installing JF 1.51 if your going to cyanogens. You'll just wipe it off anyways.
1. I suggest installing the Cyan's Recovery image first.
2. Then the newest radio and SPL.
3. Make sure you have adb setup (it makes things way easier)
if you want to run cyanogens i suggest 3 partitions although ive heard you can get by with 2. The 3 partitions are generally fat32, ext2/3/4 (2 or 3 is fine and usually is around 500 MB) and a linux-swap partition which is usually around 32 MB, and whatevers left out of your space on your sd card goes to your fat32.
4. If you want to upgrade from ext2 to ext3 then do the upgrade_fs
5. Use ADB and push over the update file or if you have a SD card reader i think you can do it that way.
6. Boot into recovery and do an alt-w (wipe) and alt-s (apply update).
7. Should be good to go from there.
Now for your questions:
1. No you dont need hykuro's SPL (sorry if i mis-spelled i dont use)
2. I personally do not use compcache and it runs ridiculously fast ( I do use linux swap)
3. As far as steps you may have missed. I believe the suggested advice is radio first then spl.
Lastly: There are guides and links to all the files you need right here on XDA. Use the search function as much as possible and the community will be glad to help out. If you have any questions you can get my contact info out of my profile, ill help as i can (im still pretty new to this).
Disclaimer: I AM NOT RESPONCIBLE FOR ANY BAD ADVICE THAT MAY OR MAY NOT LEAD TO THE BRICKING OF YOUR DEVICE.
Thanks for the replies everyone! Flashing it now, I'll report back on how it runs!
I'll be doing this tomorrow as well. Pretty straightforward.
Its so damned fast!!! lol It really feels like things open before I even push the button sometimes!
Many many thanks Cyanogen!!!!!!!!!!!!!!
I always love a happy ending.
Another happy root user = possible next gen dev!
All I would of recommended was installing his Recovery image 1.31 and running a nandroid backup just incase you want to revert back to your old build.
Done and done
New sig speaks for itself...its ultra sexy (screenshots to follow once I find an old apk)
Is there a thread anywhere for the installation of CyanogenMod specifically? I am afraid most of the threads of instructions are for Hero based roms. I am wondering if I need to partition my SD first,and what partition sizes and types. Also wonder if I need new radio and SPL for his ROM, and when to install the 1.4 recovery.
Basically confused with all the different guides for so many ROMs, and many assume the phone is already rooted and running a hacked ROM.
Thanks!!
im also assuming your phone is rooted? if not go here.
http://forum.xda-developers.com/showthread.php?t=442480
you can install the recovery whenever you want.
partitioning sizes are based on your card size, i have a 4gb with 500mb ext3, the rest is fat32. i wouldnt go past that but ive seen a couple people with a gig. i just think its a waste, im starting to think my 500 is a waste honestly.
flash the radio THEN the spl, then the rom. cyanogen i believe uses bind mounts. you wont have to set up anything, itll do it all on its own as long as you have a ext2/3/4 partition set up CORRECTLY.
anon1ski said:
im also assuming your phone is rooted? if not go here.
http://forum.xda-developers.com/showthread.php?t=442480
you can install the recovery whenever you want.
partitioning sizes are based on your card size, i have a 4gb with 500mb ext3, the rest is fat32. i wouldnt go past that but ive seen a couple people with a gig. i just think its a waste, im starting to think my 500 is a waste honestly.
flash the radio THEN the spl, then the rom. cyanogen i believe uses bind mounts. you wont have to set up anything, itll do it all on its own as long as you have a ext2/3/4 partition set up CORRECTLY.
Click to expand...
Click to collapse
No need to flash the new SPL.
No SPL? So all I need to do is follow instructions to root the phone, partition my SD and flash Cynogenmod ROM? I have an 8 gig SD on its way class 6.
The root directions at the link state to only format the SD as fat "Format your phone's SD card to FAT32 mode", but you mentioned partitioning with a ext partiton and a fat? No swap partition required?
captsammy said:
No SPL? So all I need to do is follow instructions to root the phone, partition my SD and flash Cynogenmod ROM? I have an 8 gig SD on its way class 6.
Click to expand...
Click to collapse
Yup just root partition, flash radio and flash cyanogenmod. No need to flash new spl. Hard spl is fine.
captsammy said:
The root directions at the link state to only format the SD as fat "Format your phone's SD card to FAT32 mode", but you mentioned partitioning with a ext partiton and a fat?
Click to expand...
Click to collapse
yes you have to have an ext partition. cyanogens roms have an auto apps2sd built in. you dont have to do anything BESIDES partition it to get a2sd to work on it.
No need to flash new spl. Hard spl is fine.
Click to expand...
Click to collapse
So is Hard SPL already on the stock phone? Sorry to sound the TOTAL noob, but your first line states that all that is needed is the new radio and CynogenMod, then you mention the flashing of SPL. Is there a "best" SPL? Not sure what the SPL is.
captsammy said:
So is Hard SPL already on the stock phone? Sorry to sound the TOTAL noob, but your first line states that all that is needed is the new radio and CynogenMod, then you mention the flashing of SPL. Is there a "best" SPL? Not sure what the SPL is.
Click to expand...
Click to collapse
No, Hard SPL is not included in the stock phone.
SPLs for DREA100 & DREA110 (Orig, Eng, Hard) [updated 5/12/09]
Great thread about SPL's
Get the though of "Best" out of your head. Think of what will work well with everything put together
So i ordered a new Class 6 SD Card.
Before this i was on the stock 1GB SD card that came with the G1 with an ext2 partition, and running the latest Cyan mod.
Basically i was just wondering what i need to do when my new card comes. I know i need to partition it to FAT32, and then i was gonna do ext3, and a linux swap. Can i just use sdparted script to do this?
And finally i was gonna try a Hero rom now that i have the SD card that is actually capable of running it. I push it with adb and just flash after partitioning, right?
Is there any way of getting my apps back or am i going to have reinstall everything again? I don't REALLY mind doing all over again, but it'd be nice not to have to. And if it's possible, how?
Thanks for any help/clarification...
dear ally,
there is a app that allows you to back up apps..
p.s. i apologize im not a native speaker..of how do u say..umm ur motherlan
Yes.
First re-partition the card using parted from the recovery menu or using the Amon-Ra Recovery. There are instructions for that littered everywhere in the Q&A and the Developer's forum, just use the search.
To use the Hero ROMs you need to flash the Danger SPL unless you plan on using MicroHero with HardSPL. If you want to use any of the new Hero ROMs they will require the Danger SPL and note the bold. Look up the proper instructions for flashing the SPL before actually diving in.
And no. You don't need to re-install everything. Just use switchrom or BART to make a backup as it will also make a backup of your ext partition. After backing up, just restore it after transferring everything from the FAT32 partition of your old sdcard to the new one.
I just checked and i have 1.33.2005 SPL. I believe that's the correct one, right?
I just tried to push Bart to system/sd...i'm pretty sure i did it right but when i try to store my ext it says it can't open the file.
What am i doing wrong?
Check this out
Basket Lotioner said:
Check this out
Click to expand...
Click to collapse
Thank you very much...that seems to have worked
I really like this recovery image too
No problem man, glad to have helped.
Download Amon_Ra's new recovery image and look for the 3 way partition option...once partioned, do a data wipe, drag and drop your rom of choice in .zip format onto the root of your sd card and rename it to "update"
Backup for Root users works well for restoring your apps. it can be found in the marketplace. I believe there is a donate version and a free version.
Hello,
I have a G1. I am not new to the flashing, but I have been with cyanogen mod for a while now. I want to switch to this rom. http://forum.xda-developers.com/showthread.php?t=593102.
I have looked at the requirements. I have the Radio-2.22/19.26I. I am not sure what SPL I have(or even how to check it). I have the RA-dream recovery.
How would I go about putting that rom on?. What do I need to backup? I know there are a lot of guides, but many of them are not clear.
Also how easy would it be to restore to cyanogen mod? What would I have to do?
Thank You!
Cough* okay...If you do not already have Amon-Ra's recovery I suggest you get it, search it up on google, it will make your life a whole lot easier. YOu must also search up a tut on how to install a new recovery if you do not know or have Amon Ra already. Second of all format your sd card through the Amon-Ra recovery(press home+power) and find it in the options(look around with your trackball, press it to enter). Format some of your sd card to swap(64/96mb),ext 2(anythng, but not whole sd card memory) fat32 will be using the remainder. Do a full wipe before flashing the danger spl(refer to next sentence/step).Now that you have all those flash the Danger SPL(look it up on google once again) DO NOT FLASH YOUR RADIO AGAIN. Then flash the eclair rom and your done.
Just a little note, Eclair does not have video drivers, so laggy games and youtube/mp4 videos. Just a little heads up.
EDIT: Backup data on your sd card if it's important as formatting it through amon-ra will delete them all and do not pull out your sd card while in recovery or updating cause it will do some funky stuff to your sd card =P
protomanez said:
Cough* okay...If you do not already have Amon-Ra's recovery I suggest you get it, search it up on google, it will make your life a whole lot easier. YOu must also search up a tut on how to install a new recovery if you do not know or have Amon Ra already. Second of all format your sd card through the Amon-Ra recovery(press home+power) and find it in the options(look around with your trackball, press it to enter). Format some of your sd card to swap(64/96mb),ext 2(anythng, but not whole sd card memory) fat32 will be using the remainder. Do a full wipe before flashing the danger spl(refer to next sentence/step).Now that you have all those flash the Danger SPL(look it up on google once again) DO NOT FLASH YOUR RADIO AGAIN. Then flash the eclair rom and your done.
Just a little note, Eclair does not have video drivers, so laggy games and youtube/mp4 videos. Just a little heads up.
EDIT: Backup data on your sd card if it's important as formatting it through amon-ra will delete them all and do not pull out your sd card while in recovery or updating cause it will do some funky stuff to your sd card =P
Click to expand...
Click to collapse
Alright. Thank you very much. I have already installed the Amon-Ra Recovery, so Im good there. Is the ext2 for apps 2 sd? Or would that be another process?
Also, if I am running cyanogen mod, do I need to do the danger spl? How csn I check what spl I have. I know what radio, but not spl.
kylepotts said:
Alright. Thank you very much. I have already installed the Amon-Ra Recovery, so Im good there. Is the ext2 for apps 2 sd? Or would that be another process?
Also, if I am running cyanogen mod, do I need to do the danger spl? How csn I check what spl I have. I know what radio, but not spl.
Click to expand...
Click to collapse
ext2 is for apps2sd but I recommend ext3 or if you are bold ext4. If you are on the g1 then the danger spl is needed. To check boot into fastboot (power and back arrow) It is right next to hboot (spl is the hboot). I got links to the danger spl (haykuro spl) and radio in my signature.
With any AOSP eclair right now for g1/32B magics, videos do not work at all and games will be laggy if you can even get that far. So with eclair, no videos or apps that use a lot of eyecandy, and NO GAMES.
UberMario said:
ext2 is for apps2sd but I recommend ext3 or if you are bold ext4. If you are on the g1 then the danger spl is needed. To check boot into fastboot (power and back arrow) It is right next to hboot (spl is the hboot). I got links to the danger spl (haykuro spl) and radio in my signature.
With any AOSP eclair right now for g1/32B magics, videos do not work at all and games will be laggy if you can even get that far. So with eclair, no videos or apps that use a lot of eyecandy, and NO GAMES.
Click to expand...
Click to collapse
why if you're bold? I always use ext4