Database Develop

WAP & GPRS SETTINGS MOBISTAR

Does anybody has these settings?
thanx in advance

I don't know about WAP, but these GPRS settings work for me:
Modem > Cellular line (GPRS)
Access point name > internet.be
User name > mobistar
Password > mobistar
Under Advanced... > Servers: "Use specific server adress"
DNS > 212.65.63.10
Alt DNS > 212.65.63.145
Mobistar has two programs, one where you pay 6€ a month for 2Mb and one where you pay 15€ for 10Mb. As far as I know, only the second one works for pocket pc phones (as I discovered after months of frustration and talking to about 10 Mobistar helpdesk-guys).
Good luck...

Help with Internet Connection

Hi all,
i have had my Alpine opened from o2 and its now on Tmobile. I am trying to connect to the net via wap or gprs yet it tries to connect then tells me the following
The answering modem has disconnected. To check your connection settings and chenge them if needed, tap settings.
Ive no idea what im doing
Any help in plain English please.
Thank You so much

Hi Cheryl, XDA-IIi (Alpine) is an O2 device and the default setting for everything would be on O2 network, if you are using T-Mobile on that then you need to create the settings of GPRS & Wap from T-mobile, I have attached the CAB file for UK-T-mobile just put in your device and run, but try to delete the previous connection settings of O2 if you haven't got any plans to use them in the future.
By the way have you solved your TomTom hanging/stucking problem yet?
http://forum.xda-developers.com/showthread.php?t=286020
GoodLuck
Sidd

Thank you Sid
Sid
You are so helpfull, thank you for your help.
One last question and i will stop bothering you. I have followed your screen prompts and deleted all connections, where to i place the new tmobile file, memorycard or in another file
Once again thank you
Cheryl

Just put anywhere on the device and click to run, once it finish installing it will dissappear itself.
GoodLuck
Sidd

im thick i know
Sorry Sid,
Maybe im too thick to own one of these, its attack of the blonde i think.
I sent the file to my XDA and put it in My Documents, i then came to open it and got the following
"The file \My Documents\UK_T-Mobile.CAB is not a valid windows CE Setup file"
Any ideas
Sorry to be a pain
Cheryl

T-Mobile GPRS setup
This is how I setup my US t-mobile GPRS connection on my device.
- Start Menu/Settings/Connections Tab/Connections icon.
- Select Add a new modem connection.
- Enter the name (e.g tmobile)
- Select "cellular Line (GPRS) as modem
- Click on next and enter "wap.voicestream.com" for access point name.
- Click on next and leave username/password/domain blank.
- Click on finish. (The advanced setting should be set to user server-assign IP and DNS.
Good lucks.

Cheryl dont worry and dont think that you can not handle this device its one of the nicest device ever merketed and you can play with this device allot accept you can not install Windows 2005 in this, such a pitty.
Ok try these settings step by step, please dont be hurry, be calm and try them. Let me know (by-the-way have a look on my XDA-IIi)
**************************************
Go to: Start>Settings>Connections tab
Select: Connections
Select: Advance tab
Select: Select Networks button
Select New... button under the first dropdown
On the General tab
Name: T-Mobile WAP (or whatever you want to call it)
On the Modem tab
Select: New... button
Connection Name: WAP
Modem: Cellular Line (GPRS)
Select: Next button
Access Point Name: wap.voicestream.com
Select: Next button
Select: Finish button
Be sure to reselect your previously working GRPS connects in both the dropdowns if they are changed to the new WAP ones. The new ones will only be used by your MMS application.
Select: OK and close the settings
Next we setup the MMS Application to use the new WAP connection we just created.
Select: Start>Messaging
Select: Tools menu at the bottom of the screen
Select: MMS Settings...
On the Preferences tab
Connect via: T-Mobile WAP (or whatever you called it in the previous setup)
On the Servers tab
Select: New button
Server Name: T-Mobile USA
Gateway: 216.155.165.50
Port Number: 9201
Server address: http://216.155.174.84/servlets/mms
Size: 250k (you might set this smaller)
Select: OK
Select the T-Mobile USA entry and set is as default by pressing the Set As Default button
Select: OK
********************************************************
GoodLuck
Sidd

GPRS Issues with WM6

i used the network setup wizard that came with the c_shekhar AKU 7.0C WM 6 ROM, but however, i cannot seem to connect to GPRS to surf or SEND and RECEIVE Multimedia Messages or MMS.
Cant seem to find a patch or whatever that will make this work. My operator is SMART and Location is Philippines. Thank you for your help.

Here's what I use.Try to send me(09186326099) MMS if you succeed
GPRS Setting
1. Go to Start > Settings > Connections
2. Under My ISP choose Create a new modem connection (some may say manage proxy settings)
3. Label Server Name as: Smart GPRS
4. Connect Via: Cellular Line (GPRS)
5. Click on "Next"
6. Access Point: Internet
7. Click on "next" until you are finished
MMS Setting
1. Messages > Menu > Options
2. Choose MMS > Servers
3. Choose "New"
4. Server name: Smart MMS
5. Gateway: 10.102.61.46
6. Port Number: 9201 (note not 8080)
7. Server Address: http://10.102.61.238:8002
8. Connect Via: Smart GPRS/My ISP
9. "Ok"
10. Set Smart MMS as your default set-up for MMS

ok will try this, thnx.

My Metro PCS internet is not working... Please HELP!!!

I need some advice on how to get my web and MMS working on my diamond. I originally bought a new Sprint Diamond. I took it to Metro PCS and had it flashed to their network. Now my voice and text work. So I'm trying to get my web and MMS working. I changed my ROM to Juicy 4.3 and tried following a tutorial found here:
Code:
http://forum.xda-developers.com/showthread.php?t=448955
I tried everything exactly like it said there, and it is not working. Here is my exact settings and changes that I made:
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
I checked my windows folder, but I'm using Juicy 4.3 and I think that this file is not included in the ROM. In any case, it is not there.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD
Once again, these files are not in my windows folder. I'm not sure what effect these files have on my connection, but I was unable to edit them.
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
I did this with no problem. My unlock code was just 000000.
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [email protected]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = metropcs
My number is 972-781-8284, so I used the following:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = 9[email protected]
Home Address = 0.0.0.0 (set to 0.0.0.0)
Primary HA Address = 0.0.0.0 (set to 0.0.0.0)
Secondary HA Address = 0.0.0.0 (set to 0.0.0.0)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = set to metropcs
5: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dial = #777
Username: [email protected]
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
I changed my settings to this:
Number to dial = #777
Username: [email protected]
Password: metropcs
Domain: (Left Blank)
I set my proxies to the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
So I click on the new connection and select the "Connect" option. It tries to connect and then it says that my username and password is wrong for #777. I try to go on the web and it won't connect. Also, when I go back and look at the connection, it deletes what I entered for the http option in the proxy settings. The other 3 settings are still there (wap, secure wap, and socks).
I'm not sure what else to try. I used the *228 option and updated my PRL firmware. It still doesn't let me connect. Please help!!!

Ok, I've got an update. I was able to connect to the web last night by changing the password in the tutorial to "mymetropcs". I changed it in the connection settings and also in the PP Security Settings.
Here is my current problem... My connection won't stay connected. It will sometimes connect for a little while, and then spontaneously disconnect. Most of the time, it won't connect at all. It gives me an error and says that my username or password is invalid. Also, It will sometimes delete my HTML Proxy settings that I entered in Connections. Does anyone know what is causing this and how I can fix it?

Confirmed
Followed all the steps and works perfectly ...
The only difference I had was my password and I used the last 4 numbers of my cell.
Thanks for the info.

skyfire not working?
Hey Guys,
I got internet working on PIE and google maps, etc, but for some reason Skyfire shows "network unavailable". I've tried swiching work network to the metropcs connection for programs that authenticate using a private network, but not go. Any ideas? Thanks.

htc guardian
Quick question, In my startup folder I do see a HTC CM Guadian but I do not know if its a .lnk or .exe? And if so I need to delete if its a lnk right? Under Windows folder i also have the same thing and do not know if its the .lnk or .exe? And I do not have the Iota files. Please help thank you!!
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD

connection wm6.1 to wpa2 & aes & peap

who connects with a network with Wpa2 security & aes encryption & authentication eap (PEAP) is to add a Dword value in the registry at the path "HKEY_LOCAL_MACHINE \ Comm \ EAP \ 25"
value_name: ValidateServerCert
value_data: 0