Related
Hi
I was fan Of Nokia till one month ago.
Than i moved from a N95 to A Trinity P3600 and after That to a TYTN II
I noticed that ringtones comming after 3 bip.so anyone that calls me hear 3 times bip than my pda start to ring.
My peoples thinking allways that im sleeing so i must call verybody back
Any solution to this problem?
I need my Pda to ring imediatelly
Thanks
gsm-decode said:
Hi
I was fan Of Nokia till one month ago.
Than i moved from a N95 to A Trinity P3600 and after That to a TYTN II
I noticed that ringtones comming after 3 bip.so anyone that calls me hear 3 times bip than my pda start to ring.
My peoples thinking allways that im sleeing so i must call verybody back
Any solution to this problem?
I need my Pda to ring imediatelly
Thanks
Click to expand...
Click to collapse
I believe there has been some discussion of this in the developing and hacking section of XDA. I would suggest running a search it might help you find a solution to your problem. But a good place to start would be there. I noticed I had a delay not only on my Hermes but my Wizard as well!
If you find any solution to this, pls post it here.
Thanx
ring immediately
don't know if it the same. But for XDAII, Himalaya, qtek2020 (WM6-WM5)
the trick is a registry key to be changed. don't know if it's valid also for TYN
but I have a WM6 rom on my XDA and it works. try it out
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0\
change value of Script key from apw3r in apw0r and should ring immediately.
sometimes happens that the value after a soft reset turn back to 3
so cancel the key and set it new (as a default key)
two different key will appear (default and script with same apw0r)
value zero set the sec to wait befor ringing (Answer Play Wait 0 Ring: apw0r)
Tweaking that reg key is ONE solution...
another possible solution is that u need a new simcard, the other possibility has to do with the polling time of your cell operator -> i ve posted some details in a thread in this section!
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
From ppcaddict, so j think that 3 isn't the delay ringing time.
Bye
apw3r : only ringtone
av0pw3r : vibrate and ringtone
v3w3apw3r : vibrate then ring
Well, these values are change if you go to the setting of the ringtone
This would appear to be a "feature" common to all HTC wm phones (and maybe beyond - I wouldn't know).
There is the option in a program called Tweaks 2k2 to allow you to disable the 3s delay. I can confirm this works fine on my kaiser.
May someone post the reg key setted by tweaks2k2?.
Bye
Hello to all of you!
Happy new year first of all!
Since a few days i'm using the Built in lock from WM and the Phone Canvas posted here on the Diamond Thread. Previously I've used TouchLockPro, but somehow it didn't work properly for me...
Right now I have a problem with it, I've configured with Advanced Config Tool form Schaps a timeout to lock my device automatically so when I don't touch my device 30 sec or press the power button, It will lock...
But....also in a call or something, which is very annoying because to end the call I have to unlock first AND my phoneskin is gone as well.....
So summarised:
Does anybody know how to automatically lock my phone like it should do, except while in a call??
Thanks in advance!
Kind regards
Jeroen
p.s. mods, if this item has already been discussed, can you please erase this Thread then??
Pietje_1985 said:
So summarised:
Does anybody know how to automatically lock my phone like it should do, exept while in a call??
Click to expand...
Click to collapse
I dont use the built in lock from windows anymore (i used to have your problem). Instead i now use S2U2 (Scroll 2 Unlock) and this doesnt lock during a call. One of the best apps i have on the phone - and its freeware!
kaos_king said:
I dont use the built in lock from windows anymore (i used to have your problem). Instead i now use S2U2 (Scroll 2 Unlock) and this doesnt lock during a call. One of the best apps i have on the phone - and its freeware!
Click to expand...
Click to collapse
Thanks for your reply kaos_king
I'd rather stick to the standard lock app from WM, because S2U2 is quite big app to load into memory and for me it drains my battery quicker...(at least, that's my opinion)
Thanks anyway...I hope somebody else knows how to solve this.....
Pietje_1985 said:
Thanks for your reply kaos_king
I'd rather stick to the standard lock app from WM, because S2U2 is quite big app to load into memory and for me it drains my battery quicker...(at least, that's my opinion)
Thanks anyway...I hope somebody else knows how to solve this.....
Click to expand...
Click to collapse
Yeah it used to be very annoying when i had to unlock it to put on loudspeaker! lol
Im just putting up with the **** battery for now
Hope u get it sorted mate
kaos_king said:
Yeah it used to be very annoying when i had to unlock it to put on loudspeaker! lol
Im just putting up with the **** battery for now
Hope u get it sorted mate
Click to expand...
Click to collapse
Hehe...thanks for your advice mate....gonna be allright
Untill then I manually have to lock/unlock
Isn't there somebody who could help me??
Pietje_1985 said:
Since a few days i'm using the Built in lock from WM and the Phone Canvas posted here on the Diamond Thread. Previously I've used TouchLockPro, but somehow it didn't work properly for me...
Right now I have a problem with it, I've configured with Advanced Config Tool form Schaps a timeout to lock my device automatically so when I don't touch my device 30 sec or press the power button, It will lock...
But....also in a call or something, which is very annoying because to end the call I have to unlock first AND my phoneskin is gone as well.....
Click to expand...
Click to collapse
Hello,
Please can you clarify your problems? Does the phone always lock itself in a call? What do you mean your phone skin is gone? When did it go?
Davey101 said:
Hello,
Please can you clarify your problems? Does the phone always lock itself in a call? What do you mean your phone skin is gone? When did it go?
Click to expand...
Click to collapse
Hi Dave!
Well the problem is actually caused by ACT 3.2 from Schaps I think.....I've configured the keylock from Windows Mobile to lock itself automatically after a period of inactivity OR when I press the powerbutton to suspend the the device, and after that my phone is locked! But even WITHIN a call, my device will become locked with the specified timeout and will make my phoneskin dissapear and let it go back to the homescreen!
If I want to hang up then, I have to UNLOCK my device and then TAP on the phone icon which appears next to my Signal strength Icon....THAN the phoneskin will reappear and THEN I can hang up the call.....
Hope you'll know by now what I mean...
It's driving me crazy, because I really fancy the automatic lock........
Thanxx anyway
Jeroen
in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.
untrueparadox said:
in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.
Click to expand...
Click to collapse
Allright Thank you!
I will give it a try...I'll let you know if it's working
untrueparadox said:
in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.
Click to expand...
Click to collapse
Pietje_1985 said:
Allright Thank you!
I will give it a try...I'll let you know if it's working
Click to expand...
Click to collapse
Nope problem is not solved yet...my phone still keeps locking..
Pietje_1985 said:
Well the problem is actually caused by ACT 3.2 from Schaps I think.....I've configured the keylock from Windows Mobile to lock itself automatically after a period of inactivity OR when I press the powerbutton to suspend the the device, and after that my phone is locked! But even WITHIN a call, my device will become locked with the specified timeout and will make my phoneskin dissapear and let it go back to the homescreen!
If I want to hang up then, I have to UNLOCK my device and then TAP on the phone icon which appears next to my Signal strength Icon....THAN the phoneskin will reappear and THEN I can hang up the call.....
Click to expand...
Click to collapse
Hi Jeroen,
The problem is not caused by Schaps ACT because that just enables and disables WM features by changing the normal registry entries used by WM.
The problem is some combination of your ROM and your dialer skin not playing nicely with the auto-lock feature. Try removing the dialer skin to see if that helps. If it does help then there may be another, similar phone skin you can use instead.
Ok, I've done a bit more investigation into this issue. I don't use auto-lock normally so I've tried it out. I can confirm it locks during my calls too.
You have a least a couple of options -
1) Don't use auto-lock. You could lock the phone with the left soft key like I do.
2) Don't switch off the screen during a call. There are two settings in Schaps ACT to prevent the screen shutting of automatically and this version of the phone skin has the in-call locking curtain:
http://forum.xda-developers.com/showthread.php?t=466519
Davey101 said:
Ok, I've done a bit more investigation into this issue. I don't use auto-lock normally so I've tried it out. I can confirm it locks during my calls too.
You have a least a couple of options -
1) Don't use auto-lock. You could lock the phone with the left soft key like I do.
2) Don't switch off the screen during a call. There are two settings in Schaps ACT to prevent the screen shutting of automatically and this version of the phone skin has the in-call locking curtain:
http://forum.xda-developers.com/showthread.php?t=466519
Click to expand...
Click to collapse
Hi Davey101
Thanks for your help in advance! I really appreciate it
I do use the Nosleep!.cab file to prevent my screen from going off during a call, so that would not be the cause....I think I just have to turn off the phoneskin, OR do it manually
Off course...I rather prefer to leave the auto-lock function active, but if it's not gonna work, I have to face it
Cheers mate!
Jeroen
Whenver i answer a phone call, I can hear the other person, but there is a delay of between 5 and 10 seconds before the other person can hear me, rather annoying as I end up saying hello 5 or 6 times at the beginning of every phone call. Now I have taken to remaining silent for upto 10 seconds after i answer just to prevent this.
I am running gtrabs W4X 6.5 +R3A with the 1.14.25.55 radio with the rilphone.dll that was posted with it. I think the problem happened before I had this software too though, and ideas or suggestions? a better radio perhaps? I'm on Vodafone UK.
Thanks.
me too, i would like a definitive fix for this please.
nawfalah said:
me too, i would like a definitive fix for this please.
Click to expand...
Click to collapse
So it's not just me then!
alias_neo said:
So it's not just me then!
Click to expand...
Click to collapse
Nope, I have it too... Very annoying...
me too! there is a 2 sec delay from pressing the button to being heard from the other party on the line. I have installed the Touch HD phone dialer on top of the stock rom (R3) so i am not sure if that is causing the problem.
mkouk said:
me too! there is a 2 sec delay from pressing the button to being heard from the other party on the line. I have installed the Touch HD phone dialer on top of the stock rom (R3) so i am not sure if that is causing the problem.
Click to expand...
Click to collapse
Well 2 seconds is a lot less than the time I get and I'm not using any sort of 3rd party dialer so i doubt taht's your problem.
i've had aproblem when u cant even answer a call it just keeps on ringing.......
usually if someone call when i'm playing mp3's with media player
eh im not alone then... 2 or 3 seconds before they can hear me..
yes i have the same problem too...it happened just recently after i got itje's touch-it 7 rom, but not immediately after i put that rom, so i dont know if that's the problem.
I'm using stock R2A Generic UK with stock dialer and I also have about 2-3 seconds before the other person can hear me.
basically i dont think it has something to do with the rom..cause i changed to stock rom and the same problem exists...so it must be some hardware problem...anyway i 'm taking it for service...
I think we all have that problem, and it has nothing to do with the ROM.
Its pretty bad in this modern era of high tech devices that just answering the phone has become so complicated lol
this phone is so complicated but cant do the simplest of things correctly.
Did anyone think about the Provider at any point? Because it might be Network related too.
I have no delay and are on T-Mobile USA.
I have it on TMO USA.
got the same problem on Vodafone NL..
well i have the same problem on cosmote greece....and lately it has become a lot worse...now the other person sometimes cannot hear me at all even after a minute...and if he finally manages to hear me, then they tell me that my voice is too low in volume...even though im practically yelling at them...could this have something to do with the microphone??since i can hear the other person perfectly...
on vodafone UK here - this problem is bloody bloody annoying - i end up saying hello twice if not 3 times to people - really poor. Xperia is failing to do the most simple of tasks - act as a phone which is what it should excell at!
not "xperiancing" any problems here.
running the same setup as aliasneo and i'm on Fido in canada.
Good evening.
My Diamond (Vodafone an Dutch) takes a long time before sounding the ringtone. When I (test) call myself it takes a moment before I hear the ringing sound in the phone tha I use to call my Diamond. Yhe the white light on the Diamond starts to flas for a few seconds an after that the screen lights up and only after another 3 to 5 seconds it start to ring.
I could not find it here but the is soooo much to read and search
I know that there are a few lines in the Register wher i can make some changes to change the delay etc. I have tried tha but it doen't change much.
Who can help me solve this problem??
Greetings from Holland.
Arie
I think this application has what you need, sorry, i'm not sure cuz i don't have it installed at the moment:
http://forum.xda-developers.com/showthread.php?t=409540&highlight=diamond+tweak
ReikiKing said:
Good evening.
My Diamond (Vodafone an Dutch) takes a long time before sounding the ringtone. When I (test) call myself it takes a moment before I hear the ringing sound in the phone tha I use to call my Diamond. Yhe the white light on the Diamond starts to flas for a few seconds an after that the screen lights up and only after another 3 to 5 seconds it start to ring.
I could not find it here but the is soooo much to read and search
I know that there are a few lines in the Register wher i can make some changes to change the delay etc. I have tried tha but it doen't change much.
Who can help me solve this problem??
Greetings from Holland.
Arie
Click to expand...
Click to collapse
the delay in the ringtone is not a registry issue, its because the htc dialer uses alot of ram 5-10mb so it takes a few seconds to load, if you dont want a delay, disable the dialer and use the normal windows one or look for a diffrent dialer to replace it, there are some free ones floating about
Thanks @ all.
I'M sorry it's not a registry issue. Why did HTC sell a phone with a problem like ths. It is very disturbing to wait that long and I mis calls that way.
The good news is that Diamond Tweaker seems to hava shortend the waiting time to about 4 seconds on my first test.
Keep up the good work
Arie
Hello guys, i have some problem with my Blackstone from around 2-3 weeks and this never heppand befor.
Also the problem heppand with diferent ROM`s and i always do a Task 29 befor flashing and etc.
The problem is that sometimes my Blackstone WakeUp without touching.. for example its on the table and the device just wake up with no reason ?! also sometimes wake up in my pocket..
And the strange things is that this not heppand all the times i mean sometimes wake up few times for one hour sometimes for the whole day or two didnt wake up..
1st i was thinking that maybe i have problem with the power button and somehow he give a contact and the phone wake up i chek already this and my power button seems fine.. from what i can see.
I decide to post this new Thread and hope that im not the only ONE in the whole Forum with Blackstone who have this heppand.
I don`t know why the Blackstone start to wake up by himself?!
I use this device from the time he was on the market around 2 years and i never had a problems befor.. also the device is in good shape and i never drop it.. just one day befor 2 weeks or maybe even more i saw that the device wake up with no Reason..
All sugesstions here are Welcome, please if anyone know the issue to write here!!!
Thanks in advance
P.S I know there is a ROM Section, and i already Post this to the General but seems that not many peoples visit that page and nobody have any idea.. because here most of the Cheif Masters are here and alot of other peoples for that reason i decide to post it here and maybe someone will be able to help me out if u know already this problem.
Please the MOD`s dont delate the Thread if its posible, Thanks
tsalta said:
Hello guys, i have some problem with my Blackstone from around 2-3 weeks and this never heppand befor.
Also the problem heppand with diferent ROM`s and i always do a Task 29 befor flashing and etc.
The problem is that sometimes my Blackstone WakeUp without touching.. for example its on the table and the device just wake up with no reason ?! also sometimes wake up in my pocket..
And the strange things is that this not heppand all the times i mean sometimes wake up few times for one hour sometimes for the whole day or two didnt wake up..
1st i was thinking that maybe i have problem with the power button and somehow he give a contact and the phone wake up i chek already this and my power button seems fine.. from what i can see.
I decide to post this new Thread and hope that im not the only ONE in the whole Forum with Blackstone who have this heppand.
I don`t know why the Blackstone start to wake up by himself?!
I use this device from the time he was on the market around 2 years and i never had a problems befor.. also the device is in good shape and i never drop it.. just one day befor 2 weeks or maybe even more i saw that the device wake up with no Reason..
All sugesstions here are Welcome, please if anyone know the issue to write here!!!
Thanks in advance
P.S I know there is a ROM Section, and i already Post this to the General but seems that not many peoples visit that page and nobody have any idea.. because here most of the Cheif Masters are here and alot of other peoples for that reason i decide to post it here and maybe someone will be able to help me out if u know already this problem.
Please the MOD`s dont delate the Thread if its posible, Thanks
Click to expand...
Click to collapse
O thats because someone is trying to call you wile the overall network is busy or overcrowded! that problem always happen to my phone when the network is overcrowded or busy
Don-Maco said:
O thats because someone is trying to call you wile the overall network is busy or overcrowded! that problem always happen to my phone when the network is overcrowded or busy
Click to expand...
Click to collapse
Yes men but its not normal someone to try calling me 20 times a day and never to be able to call me also not missed call is here and the phone wake up by itself... this things never heppand befor. also the device wake up sometimes in around 2-3 a clock on the night on this time nobody will call me and never someone call me in the last 10 years..
Now i disable everything..
I disable the Actyvesync, all Data like MMS ISP GRPS etc.. also Desable Location Services now will see do the device will wake up..
I think that is posible to wake up if there is abalible some Location services and need to transfer data etc..
Also i do my Operator to be choiced manual to not search for new network and also i set it to GSM mode.. not Auto not Any other just Simple GSM mode..
If after all this the device still wake up.. I don`t know what to do.
tsalta said:
Hello guys, i have some problem with my Blackstone from around 2-3 weeks and this never heppand befor.
Click to expand...
Click to collapse
Hi there,
I had the same issue from time to time and the phone would wake me up in the middle of the night.
I tried disabeling the data-connection before going to sleep and since then I didn't have the problem anymore.
Maybe this will work 4 u?
Good luck!
OMG i think i need to call Exorcist to chek out my Blackstone
I disable Almost Everything
Disabled: My Location, Active Sync, Auto Search for Network, Toggle All DATA conecctions like GPRS, ISP etc, Disabled
And my Device still WAKE UP by Itself Random when HE want... i can`t understand WHY
You need to look at your problem logically...
Some 'event' is waking up the phone..
This could be a genuine event.... sms / phone call / touch screen / button / wifi discovered etc...
OR it could be a false event caused by some malfunction.... a button that's 'sticky', some software on your phone attempting to create some connection etc...
I would suggest the following to TRY to identify the issue...
1) Reflash your device
2) Do NOT setup any APN / GPRS connection at all
3) Do not configure any weather settings or wifi etc etc
4) Turn ON the airplane mode
5).... wait and see if the problem still exists
If it does, then you DO have some issue
If it doesn't, then turn OFF airplane mode (to connect to your network) but do NOT do anything else...
see if the problem exists... if it does, then it's related to network activity
do the same with Wifi ON...
Then weather ON
then start adding apps etc
Just attack the problem logically...
TheBrilliantMistake said:
You need to look at your problem logically...
Some 'event' is waking up the phone..
This could be a genuine event.... sms / phone call / touch screen / button / wifi discovered etc...
OR it could be a false event caused by some malfunction.... a button that's 'sticky', some software on your phone attempting to create some connection etc...
I would suggest the following to TRY to identify the issue...
1) Reflash your device
2) Do NOT setup any APN / GPRS connection at all
3) Do not configure any weather settings or wifi etc etc
4) Turn ON the airplane mode
5).... wait and see if the problem still exists
If it does, then you DO have some issue
If it doesn't, then turn OFF airplane mode (to connect to your network) but do NOT do anything else...
see if the problem exists... if it does, then it's related to network activity
do the same with Wifi ON...
Then weather ON
then start adding apps etc
Just attack the problem logically...
Click to expand...
Click to collapse
Thanks for the advice i think to do the same...but the strange thing is that this heppan without reason i mean i was using one ROM for example 2 months and never have problem then one day i saw this heppand... the strange thing is that this heppand without to do diferent setting or install app and i start to wonder why from 2 years i dont have problem like this and right now its just start random to wake up...
I want to ask expert do is posible the device to wake up by Network activity? i mean NOT SMS calls etc.. just my network Operator to do something in the Network that cause my blackstone to wake up by itself?
tsalta said:
Thanks for the advice i think to do the same...but the strange thing is that this heppan without reason i mean i was using one ROM for example 2 months and never have problem then one day i saw this heppand... the strange thing is that this heppand without to do diferent setting or install app and i start to wonder why from 2 years i dont have problem like this and right now its just start random to wake up...
I want to ask expert do is posible the device to wake up by Network activity? i mean NOT SMS calls etc.. just my network Operator to do something in the Network that cause my blackstone to wake up by itself?
Click to expand...
Click to collapse
Freaky thing, but there can be a million reasons (not common though), like your neighbour having installed a new router, some trash of any app you tried and was not completely uninstalled, and so on.
TheBrilliantMistake is absolutely right, that's how I would deal with a problem like that.
Anyway, please post wathever you can find.
Good luck.
I think i found why my device wake up itselfs.. maybe this is was a ROM`s problem i have this wake up in TOPIX 6.5 Sense 2.1 and also in few of the latest NRG ROM`s..
Befor 48 Hrs i flash with the new Kwbr for Touch HD 1.7 its a WM 6.6 Build 21907 with Touch Flo 2.1XXX Manila and now since 48 Hrs the device didn`t wake up by itself..
Im using always the same settings, the same application and etc and till now no Wake Up.. so i think is posible to have something in the ROM that make my device Wake Up by itself.. because like i say i saw this when i flash NEW Nrg ROM... and till this i never drop the device or have any problems with it.