Database Develop

lost facedownmutering

working with SKTools and other software i've lost the function facedownmutering. I've tried to reset the function by the same software(s) but the issue is always present. any suggestion? thanx

Need to make the below reg key change:
HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "1"

Hi! Thanks for the answer. I had already done so, but phone mutes only after a lot of rings......

I know that this problem happens on some ROM's. Works fine for me using the Swift ROM.
There is a reg key for the Gsensor which also does the job:
HKLM\Software\HTC\HTCSensor\GSensor\PhonecallMute = 1
Try that and let us know if it works.

FaceDownMuteRing problem
my facedownmutering is on 1 but does not work like I do?

When I applied the GSensor setting and rang myself I got a partial result.
I lost my face down mute feature when I upgraded my stock rom to the next generation.
So when I called my phone it rang and I then turned it over.
The GSensor setting took effect and muted the call. However, it didn't divert the call by default - the incoming call still was 'ringing'.
All the best,
Sam.

KaiserNotification v2.02

Found a new version on Modaco...don't know whether anyone noticed:
http://www.modaco.com/index.php?automodule=downloads&showfile=2400
Kaiser Notifications (for HTC Tytn II*)
Version 2.02
* This should also work on the HTC Touch Cruise, please let me know if you try it and it works okay. Works with Windows Mobile 6.1 and the .NET compact frame 2.0 or 3.5.
Version 2.02 - Fixes an error relating to date time parsing when using certain cooked ROMs. If you do not have this problem no need to upgrade.
Whats new in version 2.0?
Audio and vibrate reminder alerts for new items
Version 2 now allows you to add audio and vibrate reminder alerts for unread items. Most mobile phones do this and I started to miss this on the Kaiser. Mobile phones will intermitently beep/vibrate if you have new items but haven't seen them, whereas Windows Mobile generally sounds once when the item arrives but gives no additional sounds after that and leaves it to a flashing LED to get your attention. With this version your Kaiser will play a wav file of your choice and/or vibrate every so many minutes for new items.
To avoid battery drain and annoying those around you in your absence, the phone will increase the time span between reminders, the default is: Item arrives, phone alerts as normal. If after 5 minutes you haven't read the message, it will play the selected wav file and/or vibrate. If the message still goes unread it will then alert again after waiting for 10 minutes, then it will alert after a wait of 15 minutes, then 20 minutes, all the way up to 60 minutes, where it will then alert every hour. These settings are configurable.
Off schedule
You can now set a period where the Kaiser Notification program should not interupt you, typically this would be used for overnight. LEDs stop flashing, and no alerts are played for unread items. You can also select to turn the mobile phone off during this period which is great for saving battery power and knowing you are not going to be woken by a ringing phone.
What's fixed?
When roaming onto networks the LED will now flash normally.
What's still broken?
I've had no joy finding out how to flash the LED amber. You may still select amber as an option, however it will flash green. Hopefully I will get to the bottom of this soon.
As per a few requests I have not been able to adjust the flash rates for the LED, or have them light static while charging.
Installation Instructions
The program must be installed on 'Device' to work, it currently does not work if installed on storage card.
1) Copy the cab file to the device and run it. Install to device and not a storage card. If you have the first version it will be removed automatically.
2) From Programs click the new icon for 'Kaiser Notfication Setup'.
3) On first running the setup program the LEDs will automatically be set to the pre-defined defaults, change as required. Set up a schedule and reminder alerts as required.
A link is placed in the Windows/Startup folder during install that will ensure the tiny program that controls the LEDs is loaded automatically when the Kaiser is soft reset or turned off and back on.
Uninstalling
Use Remove Programs to uninstall. After uninstall a soft reset is necessary to get the LEDs flashing as per the original HTC settings.
Other Information
Once this program is installed the LED will not light steady during a charge. This functionality will of course be restored after uninstalling.
Wi-Fi isn't indicated with this program as the device needs to be on to have Wi-Fi enabled anyway so you can see the connectoin status on the display.
Scheduling Mobile Phone to Turn On
(Update: On Windows Mobile 6.1 ROMs with Radio version 1.64.08.21 this is no longer an issue) If you set a schedule and select to turn the mobile phone on at the end of the scheduled period, please note the Kaiser will come fully on before timing out and going back to standby. This behaviour I can not change and is triggered by the radio chip. Please be careful if using this as option as when the phone turns on it could be subject to accidental button presses, and of course I can not be responsible for any charges you may incur if the phone accidently dials out.
alert/vibrate reminders
The alert/vibrate reminder is silenced as soon as you read one or more unread items. You do not need to read all unread items to silence the alert/vibrate reminder. The idea of the reminder is to get you back to look at your phone for new items that have arrived but you have missed, once you read a single item the reminders are cancelled as it has done it's job of getting your attention. Should any new items arrive afterwards, the alerts will start again.
Sound files
You may select any wav file for the alert sound. Only wav files that are in the Windows folder are supported. You may of course add a wav to the Windows folder to use your own sound.
Any problems let me know in the support forum. Enjoy.
Click to expand...
Click to collapse

I've had it forever, and I'm using 2.02.
I was hoping this was a new version, KN doesn't work 100% with WM 6.1.

khaytsus said:
I've had it forever, and I'm using 2.02.
I was hoping this was a new version, KN doesn't work 100% with WM 6.1.
Click to expand...
Click to collapse
Hmmm... I couldn't find it on the forum and therefore posted it (knowing it was dated march 2008). I've used the 1.0 version up to now, did you try it with that version because I have no issues with it on any ROM I tried (and I try them all, almost ROM update weekly).
Regards,
Nika.

This version is there from 3.5.2008. I am still waiting that he will resolve some issues about the led flashing.

nikagl said:
Hmmm... I couldn't find it on the forum and therefore posted it (knowing it was dated march 2008). I've used the 1.0 version up to now, did you try it with that version because I have no issues with it on any ROM I tried (and I try them all, almost ROM update weekly).
Regards,
Nika.
Click to expand...
Click to collapse
No, I'll try to find the older version. This one basically works, but I think I *only* get one LED notification after that.. It's very odd.. if I have SMS set to Blue and Email set to Green, and I get an email first, I'll get a green blink. After that I'll only get a green blink. After a soft reset, if I get an SMS first, I'll get blue blinks after..
Never any left blinks, such as missed call etc..
But at least it doesn't blink forever like nueLED did, and it'll uninstall without leaving junk all over. Also it doesn't blink incessantly and still works with TomTom, so I continue to use it... but I'll try v1.0

@ Mikulec
Which blinking issue do you mean exactly?
When your Leds wont stop blinking after receiving a new SMS/MMS just try these.
Go into your registry:
HKEY_CURRENT_USER/System/State/Messages
There are Folders named SMS and MMS, in these Folder is another Folder called unread.
There is a key called Count, set it to zero in both folders and the leds will stop endless blinking.
Cheers

Damn,
I read your post 2 or 3 days ago, thought I'll give a try cause I was searching for such an app (switching off sounds for specific time periods, i.e. in the morning to use SpoonAlarm, which uses a "notification" before activating, sort of iritating when still sleepy ).
Then I forgot and needed 30 minutes of intensive forum search to put my hands on it . I try it now, thanks for the tip.
EDIT: damn the led system isn't handling amber at all, not even when the phone is charging, that's lame :-/. And you can't do w/o it seems. I wanted this "scheduled switch off notification" .

i will keep my post short
"KaiserNotifications is must to have in Kaiser"

I have a Tilt and I don't know if my phone is the problem or what? but I cannot select "blue" for Bluetooth or "red" for unread SMS. I know there's an issue with the amber light, but my phone is only blinking green and nothing else, no matter what changes do I make. Is this software 100% compatible with the AT&T Tilt?

Thank you, brother. it is useful

TU...
But after 1 month using I instal nueLED and for me it's the best software..

i can't see amber color any more
I Installed KaiserNotification v2.02 but i can't see the amber color any more, i can see it only when it charges and before entering windows.
Is there any solution in registry?
Thx in advanded

nice prog nikagl! Great Work!

sdlopez83 said:
nice prog nikagl! Great Work!
Click to expand...
Click to collapse
It's not mine, it's created by a Modaco user:
http://www.modaco.com/user/262569/phil-uk/
Regards,
Nika.

Slow to Ring

I'm probably going to get flamed for this, but I've searched high and low and still cannot find a solution.
I'm getting pi**ed off that the Diamond seems to take almost 3/4 rings from a landline before it even makes a peep. The weird thing is, as soon as the landline starts the ringing sound, the diamond lights flashes immediately.
It's almost like the software can't keep up with the hardware. At the moment, I'm missing every single call as the answerphone kicks in before I even know I'm receiving a call.
Any clues/ideas/fixes.
Again sorry if I'm repeating a thread, but I couldn't find the answer anywhere.

here are several threads about this....
I did a search for 'ring'
http://forum.xda-developers.com/showthread.php?t=417359&highlight=ring
http://forum.xda-developers.com/showthread.php?t=403915&highlight=ring
http://forum.xda-developers.com/showthread.php?t=416100&highlight=ring
http://forum.xda-developers.com/showthread.php?t=400590&highlight=ring

alanplum said:
I'm probably going to get flamed for this, but I've searched high and low and still cannot find a solution.
I'm getting pi**ed off that the Diamond seems to take almost 3/4 rings from a landline before it even makes a peep. The weird thing is, as soon as the landline starts the ringing sound, the diamond lights flashes immediately.
It's almost like the software can't keep up with the hardware. At the moment, I'm missing every single call as the answerphone kicks in before I even know I'm receiving a call.
Any clues/ideas/fixes.
Again sorry if I'm repeating a thread, but I couldn't find the answer anywhere.
Click to expand...
Click to collapse
Was the same on my Trinity device and someone elses Wizard device. A feature of WM perhaps

there is a cab
fixs it..welll sort off
use the search and you will find
i have it on my diamond and its alot beter now

1. seems to me impossible that you, after soooooo much searching didn't find a thread to join instead starting a new one.
2. to my best knowledge (and i read and i really searched) there is no solution to this problem except the usual change the ring tones to mp3/change the rings to wav and a few very dubious cab files that (as a later everybody is complaining) had no effect. there is also one tweak in the Diamond Tweak program that also has no result (at least on my diamond).
3. just to add a slap to the insult, even the BT in my car start ringing before the diamond! i hear the BT device ringing and looking at my diamond i can see that he is still in the "mute but blinking" phase. most of the calls i pick and answer before my diamond's first ring.
4. now going to report this thread and ask some mod to glue it to an existing one. next time search and if not satisfied with the findings just post on an existing thread...
meanwhile you got more help than you deserve.

So friendly......
Fixed it now due to this thread. Disabled phone skin and changed mp3 to wav.
No issues now.

alanplum said:
So friendly......
Fixed it now due to this thread. Disabled phone skin and changed mp3 to wav.
No issues now.
Click to expand...
Click to collapse
just to stay on the "friendly" side: disabling the phone skin also gives you 10mb of more memory like in this post:
http://forum.xda-developers.com/showpost.php?p=2501745&postcount=27
or this one:
http://forum.xda-developers.com/showpost.php?p=2486722&postcount=1003
and pay attention at others have to say:
http://forum.xda-developers.com/showpost.php?p=2486738&postcount=1004 so maybe i am wrong.....
why i didn't recommend it to you? because is not so simple. it also disable a few other things. what things? i'll let you find out alone (this time).

backlight help!!!

Ok... I have set my backlight to 1 minute time out NUMEROUS times, but it keeps resetting itself back to 10 seconds after some time (i'm not sure how long). This is driving me crazy! Especially when I'm trying to read something. What can I do? ANY help is beyond appreciated!
p.s. It began after I installed the new windows 6.1 update.

I am having the same problem and it is also driving me crazy!!
Someone please help!
Thanks

Me to
..just yesterday the phone kept trying to dim at 10 seconds but S2u2 wouldn't allow it so it would come back on..and it kept doing that crap every 10 seconds!!! I can't stop that setting from reverting back to 10 seconds!!!

Seeeeee? Somebody has to be able to figure this out.

same issue
i got the same problem too. i got the oem rom with wm6.1 on it. i installed s2u and manila 2d and pocket tool man. tried all the settings i could find from those programs. but the backlight keeps resetting back to 10sec after a while
any help would be good!

Possible Fix when Backlight Patch doesn't work
Like many others, I have applied the Backlight patch and experienced NO improvement after the Tilt is turned off and on.
I have loaded PHM's RegEdit and had a look at other registry settings and found a solution that works on my Tilt.
Under HKEY_CURRENT_USER / ControlPanel / Backlight you will find a key called "LockLevel", my value for this key was initially 1. I changed it to 0, and since then, whatever setting I use for the backlight timeout stays put even after numerous power cycles and days of use.
Would someone else who is familiar and comfortable with RegEdit try this and confirm this so we can verify it is not just isolated on my Tilt?

dazimmermann said:
Like many others, I have applied the Backlight patch and experienced NO improvement after the Tilt is turned off and on.
I have loaded PHM's RegEdit and had a look at other registry settings and found a solution that works on my Tilt.
Under HKEY_CURRENT_USER / ControlPanel / Backlight you will find a key called "LockLevel", my value for this key was initially 1. I changed it to 0, and since then, whatever setting I use for the backlight timeout stays put even after numerous power cycles and days of use.
Would someone else who is familiar and comfortable with RegEdit try this and confirm this so we can verify it is not just isolated on my Tilt?
Click to expand...
Click to collapse
I am using the same PHM's , and my value is set at "0" already....

yes, Mine is also set at 0.
I cant believe that HTC would release a patch that doesnt work!
Anyone else had luck?

Setting it from 0 to 1
"Un-dims" your backlight. Setting it from 1 to 0 makes it bright thats all I could figure out

It's a known problem with the 6.1 ROMS, although not everyone experiences it. Even the stock AT&T ROM had it. An official fix for it was released not long ago. It's available for download here: http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
It doesn't wipe your phone, so it's safe to do without having to set everything back up.

backlight works, but scroll wheel does not
jcreemer said:
It's a known problem with the 6.1 ROMS, although not everyone experiences it. Even the stock AT&T ROM had it. An official fix for it was released not long ago. It's available for download here: http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
It doesn't wipe your phone, so it's safe to do without having to set everything back up.
Click to expand...
Click to collapse
This worked fine and fixed the backlight issue on my stock AT&T Tilt ROM, but it seems to have screwed up my scroll wheel function. Now my scroll wheel only turns up/down the phone volume. I can't seem to get it to do anything else in any other program.

bumblefreak said:
This worked fine and fixed the backlight issue on my stock AT&T Tilt ROM, but it seems to have screwed up my scroll wheel function. Now my scroll wheel only turns up/down the phone volume. I can't seem to get it to do anything else in any other program.
Click to expand...
Click to collapse
I haven't experienced that problem. What ROM are you using?

Finally!
Click Here for the .cab that fixed my unit. I got it off the ATT forum.
NOTE to all... Even this fix did not solve my problem until I checked the boxes to time the backlight. I like the backlight feature on all the time. If I don't want to see the screen, I turn it off.

I Had The Same Problem Too, But Then I Realized That Whenever I Disabled The Password Option In Settings It Went Back To Normal And Stayed At Whatever Timing I Set It To. The Only Thing About It Is That I Cant Use The Password Option In Settings. Unless I Was To Disable It Everytime I Used The Phone For More Than A Few Minutes At A Time...
I Have The At And T Tilt With The Shipped Wm6.1 Rom.

this will help
with your backlight problem
It helped me and then-some

I've tried all suggestions (except registry edits) and nothing works for mine! I like to keep my display on for GPS functions, but mine dims whether it's on battery or external power. The link for the cab in the AT&T forum no longer works, so I don't know whether that was similar to the HTC fix (which also doesn't work for me).
Since I have yet to try this, what program should I use to edit my registry? I've never done it, so I don't know what I need to do it. I also noticed someone posted these registry changes in the AT&T forum:
- change HKCU\ControlPanel\Backlight\ACTimeoutTemp value to your desired AC timeout in seconds. I set mine to 120 (2 min).
- change HKCU\ControlPanel\Backlight\BatteryTimeoutTemp value to your desired Battery timeout in seconds. I set mine to 60 (1 min).
- change HKCU\ControlPanel\Backlight\Locklevel\Locklevel to 0xFFFFFFFFF (this may also be just FFFFFFFF is your reg editor allows direct hex entries).
Note: With this change, if you wish to change your dimming timeout, you'll have to go back into the registry and update the settings.
Does this look like it would work? This is driving me absolutely nuts and I am this close to reverting to 6.0, even though my device was shipped with 6.1.
Thanks for the help, everyone.
EDIT: Since my search for this answer brought up too many different variables, I'd wanted to pose the question here, as it pertains to this issue... Will upgrading to a 6.5 ROM solve this backlight issue more simply?

Diamond takes his time before sounding ringtone.

Good evening.
My Diamond (Vodafone an Dutch) takes a long time before sounding the ringtone. When I (test) call myself it takes a moment before I hear the ringing sound in the phone tha I use to call my Diamond. Yhe the white light on the Diamond starts to flas for a few seconds an after that the screen lights up and only after another 3 to 5 seconds it start to ring.
I could not find it here but the is soooo much to read and search
I know that there are a few lines in the Register wher i can make some changes to change the delay etc. I have tried tha but it doen't change much.
Who can help me solve this problem??
Greetings from Holland.
Arie

I think this application has what you need, sorry, i'm not sure cuz i don't have it installed at the moment:
http://forum.xda-developers.com/showthread.php?t=409540&highlight=diamond+tweak

ReikiKing said:
Good evening.
My Diamond (Vodafone an Dutch) takes a long time before sounding the ringtone. When I (test) call myself it takes a moment before I hear the ringing sound in the phone tha I use to call my Diamond. Yhe the white light on the Diamond starts to flas for a few seconds an after that the screen lights up and only after another 3 to 5 seconds it start to ring.
I could not find it here but the is soooo much to read and search
I know that there are a few lines in the Register wher i can make some changes to change the delay etc. I have tried tha but it doen't change much.
Who can help me solve this problem??
Greetings from Holland.
Arie
Click to expand...
Click to collapse
the delay in the ringtone is not a registry issue, its because the htc dialer uses alot of ram 5-10mb so it takes a few seconds to load, if you dont want a delay, disable the dialer and use the normal windows one or look for a diffrent dialer to replace it, there are some free ones floating about

Thanks @ all.
I'M sorry it's not a registry issue. Why did HTC sell a phone with a problem like ths. It is very disturbing to wait that long and I mis calls that way.
The good news is that Diamond Tweaker seems to hava shortend the waiting time to about 4 seconds on my first test.
Keep up the good work
Arie