every time i connect the usb to my phone
the phone change the time(one hour more)
even my pc have the right time
why?
can somebody help me?
thanks
Assuming you are using a TouchPRO (Raphael).
Some carriers incorrectly broadcast time such as during Daylight Saving time. Few things to try:
ActiveSync
Verify time sync settings (Tools -> Options -> Setting Button)
Mobile Device
Verify Automatic Time Zone change: Start -> Settings -> Phone -> Time Zones
HTH,
i already check that setting and is ok
but still change the hour
Dadiio said:
i already check that setting and is ok
but still change the hour
Click to expand...
Click to collapse
Not sure I understand what you mean. Are you saying that you have tried turning either/or of these feature on/off ?
For example:
ActiveSync Hour = off
Mobile TZ = on
ActiveSync Hour = on
Mobile TZ = off
ActiveSync Hour = off
Mobile TZ = off
ActiveSync Hour = on
Mobile TZ = on
Cheers,
ActiveSync Hour = on
Mobile TZ = off
but my pc time is ok
even a friend told he has the same problem
You tried all of the combinations above and the Manila Flip Clock (or mobile device time) on the device is still incorrect?
... or, are you referring to the time on SMS messages - which is a different issue.
Cheers,
the system time
To confirm;
You tried all four combinations (restarted in-between) and the time is still off by an hour?
Unless there is a setting elsewhere that is overriding the time or another application is involved, I'm not sure what to suggest ... that should have fixed the problem.
Is this a stock ROM or a custom ROM? If stock, you may need to contact support. If custom, try posting in the corresponding ROM thread in case it's a bug.
Hi, I had the same problem, happened at daylight savings changing time,
What fixed it for me, and might work for you, make sure that your computer and phone are on the same timezones,
My computer was set for +10 Hobart, and phone was for Sydney +10,
It changed when i went down there to tasmania for uni,
Making these the same fixed the problem for me,
Hope this helps!
its works ok
thanks a lot
Related
Hello,
i have a data option at vodafone germany with 200 MB Traffic inclusive. But there is a problem: Vodafone counts the traffic in 100kb Parts and terminates the connection if there is no data transfer for some minutes (mostly about 8 minutes)
I use the exchage Email push and there is no constand data traffic. Only when an email arrives or when the exchange sends a timeout.
So Vodafone terminates the internet connection, active sync recognized it and starts the connection again. That would be no real problem, but every connection is a new 100kb part.
So i've got about 30MB Traffic after 2 days only for reconnecting. That is not really good for my inclusive traffic.
So i need a tool like an automatic ping. A program, which sends every x minutes a ping so that there is a minimal traffic and vodafone keeps the connection alive.
Is there such a tool? It could also be a tool, which looks for updates every 5 minutes The program only have to do a little traffic.
Because the connection is termindated by vodafone, no kaiser reg tweak is working.
I hope you can help me.
Thank you in advance
Special2k3
It's well known that Windows Mobile cuts off the connection after some minutes. But I've never heared that a provider cuts off the connection after some minutes without data. Are you really sure about that? A good provider wouldn't do that... ;-)
I've already had a similar problem with my old S200. It disconnected after some hours. But that wasn't a problem with the provider. It was a problem with the ROM update.
Nevertheless at that time I've also searched for a ping tool. I wrote a little Mort-Script (with logging feature) and executed it with SkSchema every hour. Since you are needing smaller intervals this could be a problem. It is a little bit hard to use SkSchema for small intervals. Here is the script:
Code:
If( InternetConnected("http://www.google.de/") )
Chk = "OK"
Else
Chk = "Off"
EndIf
FmDate = FormatTime( "Y-m-d" )
FmTime = FormatTime( "H:i:s" )
FmName = FormatTime( "ymd" )
LogText = FmDate & ", " & FmTime & ", " & Chk & ", time^NL^"
LogFile = "\My Documents\MortScript\Conn\Conn_" & FmName & ".log"
WriteFile( LogFile, LogText, 1 )
Exit
Another solution could be this tool:
http://www.wizcode.com/products/view/gprs_keep_alive
or, use vxUtil. see the Wiki for my related mass Ping tutorial
So, up again.
Is there no real solution for my problem?
No little simple program?
Special2k3
Special2k3 said:
So, up again.
Is there no real solution for my problem?
No little simple program?
Special2k3
Click to expand...
Click to collapse
http://wiki.xda-developers.com/inde...ng from the Net When I Don't Actively Use It?
Hi. Use Bandswitch to keep your connection "always-on".
Dani
Menneisyys said:
http://wiki.xda-developers.com/inde...ng from the Net When I Don't Actively Use It?
Click to expand...
Click to collapse
Thank you, nice program, but i have a problem: When the TyTn II is in standby mode (after pushing the power button once) the programs stops sending pings. When i turn on the tytn again, the ping sending continuous.
Is it possible to send also pings when the device is in standby?
Special2k3
Have you already tried the program I've mentioned in the post #2?
http://www.wizcode.com/products/view/gprs_keep_alive
Exact the program i was thinking about. But i have the same problem: The program works great if the kaiser is on. But when it is in standby mode (about 80 % of the day) the program stops to work as long as the kaiser is in standby.
Is there a way to define if a program should stop at standby or not? I mean the HTC Music Player also works in standby mode.
Thank you
Special2K3
Hello i have a T-Mobile Wing with the last available rom from them and everytime i turn my cellphone off the time gets behind , sometimes its a few minutes , but sometimes it gets behind with a considerable amount of time.
I Downloaded a fix from the htc website but it didn't fixed my problem.
Any Suggestions guys
Thx in Advance.
What version of Windows Mobile do you have?
Disable Automatic Day Light Savings, I hope I'm not mistaken, but either on WM5 or WM6 it was under Comms Manager->Phone Settings....
try Windows Update
Did you already try Start-> settings -> system -> Windows Update? There should be a Microsoft Corp. Extended DST Update available. Or try, http://www.microsoft.com/windowsmobile/daylightsaving/default.mspx for your phone and http://support.microsoft.com/gp/cp_dst for your computer.
I installed the windows update already im running wm6 but everytime i turn off the phone, the timezone gets changed from gmt -4 that is my current time zone to gmt +1 and sometimes it remains in gmt -4 but it doesnt have the correct time.
Have a problem with my Diamond, its set to 15mins faster than real time (habit of mine) and only occasionally when it syncs with my Vista64 PC the time reverts to "real time".
I'm not sure if its syncing the time to the internet or via my phone carrier, tried to fix this under phone options on the diamond and activesync options to no avail.
This is driving me nuts as I'm using the phone as an alarm clock and it won't be pretty if I wake 15mins late for work...
Errrmmm...
I'm not sure what 'problem' you're stating here? If you're complaining that your PC corrects the time on your device when you sync, then you don't have a 'problem' with your device - that's what syncing does (amongst other things)!
.. or are you saying that you want it to correct the time, and it isn't?
Well to clarify :
PC clock and phone clock is 15mins faster
OCCASIONALLY (its done this in about 1 per 4-5 syncs) the phone reverts back to "normal" time (i.e. goes back 15mins). The PC clock is still 15mins faster.
This leads me to believe that the phone is updating the time either from the carrier or the internet (its set to use the PC's internet connection when synced)
Pesty_74 said:
Have a problem with my Diamond, its set to 15mins faster than real time (habit of mine) and only occasionally when it syncs with my Vista64 PC the time reverts to "real time".
I'm not sure if its syncing the time to the internet or via my phone carrier, tried to fix this under phone options on the diamond and activesync options to no avail.
This is driving me nuts as I'm using the phone as an alarm clock and it won't be pretty if I wake 15mins late for work...
Click to expand...
Click to collapse
To keep phone from syncing with PC time:
In ActiveSync on PC, right click on "Windows PC", click the "Settings" button. Uncheck "Synchronize Pocket PC date and time when connecting."
Thanks for the quick reply.
Unfortunately I'm running Vista64 and Windows Mobile center doesn't have that function, I've tried all the options looking for something similar for the past 2 days....
Thats odd - I always thought it synced with the PC's time.
Yeah I know, I've checked that extensively, its 15mins slower than my PC time.
I'll try and see if turning off auto-adjust for timezone/daylight savings helps
I have a Windows 7 PC and a Kaiser with WinM6.5. I have disabled time sync on both of these.
Whenever I connect my Kaiser to PC and sync it, the time on Kaiser gets changed by exactly one hour more than the PC. If I change it back and connect the device again, it still happens. I've tried changing ROM on my kaiser but of no avail.
How do I fix this?
PS: I'm based in Pakistan. Here we have DST applied so that clocks are forwarded by one hour. That means the time which appears on Kaiser after syncing is offset by two hours without DST and one hour with DST.
Make sure the TZ is the same on the PC and on the Kaiser. Try re-synch and see if the problem it still does the same thing. I had the same problem a while back, and it turned out my PC was displaying the right time but set to a different TZ.
I just created my live emailaccount on the email tab in one of the latest Energy roms and when you choose to check your email automatically every 30min for example, the data connection stays on, which uses a lot of battery offcourse. I think this is probably with all roms.
Isn't there any trick or tool, when the emailprogram in the hometab checks for emails that it disconnects automatically after the emails have been transfered to your phone ? This would save a lot of battery, I searched for an option but didn't find anything.
Thanks!
You can try "Manila Dial-up Enabler/Disabler"
http://forum.xda-developers.com/showthread.php?t=610657
Hi
If you're not squeamish with registry editing, look here
HKLM\Comm\ConnMgr\Planner\Settings\
Change CacheTime to 60
In SuspendResume replace ~GPRS! with GPRS_bye_if_device_off
Then soft reset
your device will disconnect teh data connection after 60s of idle time
source
http://forum.xda-developers.com/showthread.php?t=305332
see post #9
I've used these for close to 16 months now.