Related
Dear Forum Members,
Maybe some of you can help me out. Here is what's happening:
The Kaiser's GSM radio is switched on and the unit behaves totally normal. From time to time I sync the Kaiser via AS 4.5/USB with my desktop computer and MS exchange (as well via the desktop computer). After all syncs have been completed successfully I disconnect the USB cable and the trouble starts.
After about 2 to 5 minutes the Kaiser starts to build up a GPRS/UMTS/HSDPA connection to the internet and tries to sync itself with exchange, even though it is not supposed to do so. All exchange settings are switched to manual sync, MS Push is switched off. Disconnecting GPRS results in a re-connection 2 to 5 minutes later. Stopping email programm, Async and connection manager on the kaiser does not fix the problem, the GPRS connection is again established.
Only work around for me at the moment: placing Kaiser next to computer speakers on my desk so that I hear that the phone is showing unwanted activity; if it does: soft reset.
Has anyone any idea what could cause this behavior? As mentioned above, it only happens after syncing the Kaiser with exchange, all exchange sync modes are set to manual.
This really did cost me some bucks while being abroad recently since I did not notice that GPRS was on all the time.
Thank you all!
GZ
Graf Zeppelin said:
Dear Forum Members,
Maybe some of you can help me out. Here is what's happening:
The Kaiser's GSM radio is switched on and the unit behaves totally normal. From time to time I sync the Kaiser via AS 4.5/USB with my desktop computer and MS exchange (as well via the desktop computer). After all syncs have been completed successfully I disconnect the USB cable and the trouble starts.
After about 2 to 5 minutes the Kaiser starts to build up a GPRS/UMTS/HSDPA connection to the internet and tries to sync itself with exchange, even though it is not supposed to do so. All exchange settings are switched to manual sync, MS Push is switched off. Disconnecting GPRS results in a re-connection 2 to 5 minutes later. Stopping email programm, Async and connection manager on the kaiser does not fix the problem, the GPRS connection is again established.
Only work around for me at the moment: placing Kaiser next to computer speakers on my desk so that I hear that the phone is showing unwanted activity; if it does: soft reset.
Has anyone any idea what could cause this behavior? As mentioned above, it only happens after syncing the Kaiser with exchange, all exchange sync modes are set to manual.
This really did cost me some bucks while being abroad recently since I did not notice that GPRS was on all the time.
Thank you all!
GZ
Click to expand...
Click to collapse
did u try some system tool to see what processes are the kaiser runing? Try to see the running processes before and after the sync, maybe the sync starts some process that is causing your problems.
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirror® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.
I’ve had the diamond for approx 1 month and regularly sync it to my work and home pc running XP and Vista respectively. Up until now I’ve never had a problem with activesync to any of my past smartphones or PPC’s.
My diamond has all of a sudden decided that it doesn’t want to sync anymore. It connects ok and I can transfer files back and forth it just won’t sync.
I’ve searched the forum and found similar symptoms but nothing has worked.
I’ve deleted the partnership from the device and both pc’s, created new partnerships which on first connection does actually sync (sometimes) but from then on either says “looking for changes” or “synchronising” until it times out giving the error message “Synchronising cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft Activesync Troubleshooter in Microsoft Help on your desktop computer”
I’ve tried the help, I’ve let it do its own diagnostic, I’ve unchecked the “enable advanced network functionality” option in USB to PC. I’ve soft reset, hard reset, the only thing I haven’t done is re-flash a new rom.
Does anybody know if flashing a new rom/radio will solve the problem. I would normally just try it but I spent an hour yesterday after I hard reset putting everything back to the way I like it only to find that it synced the first time but wouldn’t work again.
If anyone has any other suggestions before a re-flash I would welcome them. Otherwise I’ll bite the bullet and hope for the best.
I’m currently running Duttys V1.6 Radio version 1.00.25.07
I Had this problem
Hey fella, i was having this problem and after doing a little research i found the following.. If you constantly activate and deactivate the mobile (pair and unpair) you can corrupt A/S on the system. The only way i got around this was to uninstall active sync and re-install it again.
Hope this helps...!
I've never been able to get activesync to work harmoniously between relationships with two PCs.
Most syncs with a second machine after successful syncs with a first tend to result in errors that require my intervention, especially if an item of data has been changed. Drives me mad sometimes, and I often need to spend more time fixing these errors than it would take to manually update stuff across my three devices. I get the feeling the comparison/processing engine activesync uses is no where near sophisticated or clever enough to carry out the processing, and when it does have errors, the scope for my intervention to help it in its quandary are fairly hopeless.
I'm hoping that as devices like the diamond bring this lets face, it fundamentally great, but nevertheless fundamentally flawed platform to the masses, then Microsoft will have to put more effort into activesync and how it copes with relationships across two (or perhaps even more in future) PCs.
Ps, neomagik, actual connection, which sometimes has hiccups, has never been a big problem for me, (a few minutes in the various settings usually sorts these), but I've been using activesync for about 4 years before my diamond with with my HP4700 and various double PC partnerships along the way, and can confidently say that the problems I describe are not device related, but are the result of activesync inadequacies.
Thanks fyew-jit-tiv but I've tried that already. Also, it wont sync to WMDC in Vista either and it's unlikely that the same fault occured in AS and WMDC at the same time. This is what leads me to believe it's the Diamond and not the PC's.
Been there, done that....
Suprised you've not had this issue earlier...I've been suffering with Activesync issues for years
There are lots of ways to diagnose and resolve but perhaps you just might want to get the sledgehammer out...this mostly works for me....(I hope your familiar with Outlook!)
On one PC (I would use the XP "older" Op system one) export your synced data from Outlook to a .pst or .ost file for backup and later import (after delete & tidy stuff you no longer need in Calander/Contacts/Tasks, etc)
then
Delete all your data in Outlook, create a new empty .pst (connect to same), delete old .pst
then
delete partnership with device (to be sure), and remove same data (Contacts/Calander etc) from device
then
You can then check the exported/saved .pst for errors (I can't remember the MS programme...google for it), once satisifed OK import all you info back into Outlook
then
Synchronise with new partnership to device.
Hopefully so far so good
(sometimes I even rename the device-partnersip etc in case something "residual" there stays behind and corrupts something )
Next
Prior to connecting device with WORK PC:
Delete all previously synced data in Outlook and delete partnership there. I then make sure that in Activesync (before establishing new partnership) that I click option for one way data transfer ie replace items on computer with those from device
then
...plug in and establish new partnership, hopefully no problems....data populates computer from device. Once established then put back how you prefer data to be transfered (if there is a conflict etc)
Return home and partnership there still synchronised, Hopefully this works
If you find that there are still issues, you can un-Check and Check each synced area (Contacts, Calander, Tasks, Synced Files) independently to see where the conflict is.....
...I have found conflicts mostly occur with:
i) Calander: Birthdays/Anniversarys (probably as they are extended recurring events)
ii) Calnder: Meetings etc that might be recurring
There are real issues if using old versions of Outlook (2000 for me at work ) syncing with most recent ones!!
Sorry for the mad typing but best I can do for a "Quick" reply....Good luck !!
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
neomagik said:
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
Click to expand...
Click to collapse
Presume you have done the most obvious, and that is un-install and re-install Activesync and the Vista sync programme on both PC's ?
neomagik said:
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
Click to expand...
Click to collapse
I had this once I think a year or so back. Tried so many things that I can't remember what finally fixed it.
I think a good place to start though, like PJ6363 says, is do a clean sweep... re-install activesync on both machines, and I would also reinitialise your Outlook Account (.pst) on the master PC and delete on all other devices.
Good luck, and tell us how you get on.
neomagik said:
Thanks fyew-jit-tiv but I've tried that already. Also, it wont sync to WMDC in Vista either and it's unlikely that the same fault occured in AS and WMDC at the same time. This is what leads me to believe it's the Diamond and not the PC's.[/QUOT
Neomagik... Sorry i could help any further fella.. As i said in last post i had this problem and i just re-installed A/S... The only other thing i done after i un-installed A/S was to run a registry cleaner.!
P.s i don't think is down to the Diamond. I Was having this problem with the Touch (elf) too...
Click to expand...
Click to collapse
well, i have similar issue w/ sync and finally, i solved the problem by changing the sync cable.
Thanks folks,
I'm going to try all of these.
@ Snufkin, I'm using two different sync cables so I know this is not the problem.
My diamond did funny things when the screen would turn off quickly after connecting because i set it not to charge when connected. Gave all sorts of weird errors.
Now, screen stays on because i want it to charge and sync completes now, still takes a while though.
You guys are aware that WM6.1 has a problem syncing with 2 computers, aren't you?
Some people claim they managed to do it and I believe them, only none of the voodoo worked for me. Never had that problem with WM5 and 6.
pedmond said:
You guys are aware that WM6.1 has a problem syncing with 2 computers, aren't you?
Some people claim they managed to do it and I believe them, only none of the voodoo worked for me. Never had that problem with WM5 and 6.
Click to expand...
Click to collapse
there is a long thread about this issue somewhere conclusion 100% in wm 6.1 you can not sync with 2 PC. this is a wm 6.1. related problem.
i can sync with 2 pC my athena with wm 6 but i can not do it with the diamond or trinity. don't even try it. it will mes you the whole outlook!
Sync with WM6.1....off course u can!
Been syncing my Kaiser and now Diamond with WM6.1 for well over a year with 2 PC's. Must have done it at least 20 times with various devices and ROM's. Kicker is that my work has W2000 & O2000, and at home I use XP and O2007....still works!!
I'm not saying I don't occasionally have issues...but I do carry more than 1000 contacts and and extended calander with numerous recurring entries
.....like I've posted before (as many others) there are issues, but nothing insurmountable. I'd be lost if I could not sync my work PC, homw PC and PDA
Read around and you'll see........
here u are, i found the thread:
http://forum.xda-developers.com/showthread.php?t=377823
i tried long and hard to sync my diamond with 2 pc. all i got is errors and double tasks and appointments. got tired and gave up! my contacts list is too precious to play with!. i do have over 600 contacts and 1300 numbers (tlf, mobile, fax).
in order to have my diamond sync with 2 pc i syinc it with one, then i sync my athena and sync with the second....lol...this is my way to have 2 pc and 2 htc devices in sync.
I had my Diamond (and previous Trinity) synced with 2 pc's. No major problems until now.
It's dead
OK, I have tried the steps suggested by PJ6363 with no success. It won’t sync to the first pc let alone the second.
I then decided to dig out the old C500. After blowing the dust off I hard reset to clear out any info left on it. Plugged it in and hey presto, immediate sync. Unplugged it and tried again, another sync. Added a contact whilst synced and it updated straight away.
I then deleted all partnerships on pc and diamond and plugged it in. It went through the usual setup and connected to the device as before but surprise surprise, no sync.
Does this not mean that the data on the PC is fine and it is a problem with the Diamond, possibly a hardware problem?
Unless anyone else can suggest anything I’m going to flash a new rom but I have a strong suspicion it will not make a difference.
neomagik said:
OK, I have tried the steps suggested by PJ6363 with no success. It won’t sync to the first pc let alone the second.
I then decided to dig out the old C500. After blowing the dust off I hard reset to clear out any info left on it. Plugged it in and hey presto, immediate sync. Unplugged it and tried again, another sync. Added a contact whilst synced and it updated straight away.
I then deleted all partnerships on pc and diamond and plugged it in. It went through the usual setup and connected to the device as before but surprise surprise, no sync.
Does this not mean that the data on the PC is fine and it is a problem with the Diamond, possibly a hardware problem?
Unless anyone else can suggest anything I’m going to flash a new rom but I have a strong suspicion it will not make a difference.
Click to expand...
Click to collapse
It looks like something other than what I have been pointing out....see here: http://forum.xda-developers.com/showthread.php?t=377823
I think you need to get serious and re-install the actual software itself on the device (hard reset), appears that Activesync on PC's is good...but would re-install there anyway!!
Look at it this way, you have found a sweet excuse to update your ROM withthe latest version and clean up your contacts/calander etc....should not be an issue with a fresh ROM install (try SwiftB 6.0....excellent!!)...let us know how you get on
Ah ha....forgot something critical...if you are syncing using older version of Windows (2000) or Outlook ...or any issues syncing for that matter, then I found that you MUST go to Settings->Connections->USB to PC and turn off Enable Advanced Network Functionality...have you done this?
I've been putting up with this since I got my Diamond, but now enough is enough
Has anyone experience Activesync disconnecting there device after a random period of time?
The device connecs and syncs - no problems - but after what might be 5mins, or 35mins (randomly does this...), it just disconnects!!
Appears to have nothing to do with charging (could be only partially charged or fully) or actual syncing process. Not a real issue as it still syncs initially and even when disconnects it still charges up from the USB but...this appears to be a flaw with the s/w of diamond or WM6.1 (to me...)
If this is an issue perhaps someone from HTC might read this and note same!
Happens to me too. Not all the time, not often... exactly random, as you said. Quite annoying
I'm sure there can't be just two of us! This happens to me for nearly every connection, the difference is sometimes its in 5min, sometimes 5hrs
BTW, this happens with both my work and home PC......
Surely there are others with this issue???
now i cannot even connect but when i can never it will never doconect except when you turn the screen off
Hi,
I have the same disconnect problem, varies every time.
Looks like I'm not alone... Every 5 mins I need to turn off and on my screen t to reconnect, no matter at home or at office.... you guys are right... ANNOYING
Not sure if this might work but in Device manager > USB Hub properties > untick Allow computer to turn off this device to save power.
kien said:
Not sure if this might work but in Device manager > USB Hub properties > untick Allow computer to turn off this device to save power.
Click to expand...
Click to collapse
Thanks will try this {USB Root Hub} as it was actually clicked on....let you know how it goes!!
I haven't got any problem with Active Sync, both with Exchange server and with the desktop Outlook. Are you syncing with XP or Vista? I found Vista is rock solid when it comes to ActiveSync using their Mobile Device Center.
Lord_BlackAdder said:
I haven't got any problem with Active Sync, both with Exchange server and with the desktop Outlook. Are you syncing with XP or Vista? I found Vista is rock solid when it comes to ActiveSync using their Mobile Device Center.
Click to expand...
Click to collapse
Hi there, using W2000 at work....
and using XP at home...which is marginally better!!
Have always had issues with Activsync..this is just another "first"
Lord_BlackAdder said:
I haven't got any problem with Active Sync, both with Exchange server and with the desktop Outlook. Are you syncing with XP or Vista? I found Vista is rock solid when it comes to ActiveSync using their Mobile Device Center.
Click to expand...
Click to collapse
Don't speak too soon. I didn't up until a weeks ago.
having the same problem... activesyncs disconects as soon as htc diamond screen goes off..
any solutions?
e2luispa said:
having the same problem... activesyncs disconects as soon as htc diamond screen goes off..
any solutions?
Click to expand...
Click to collapse
sounds like the device is turning off (not just the screen off)...this will of course disconnect ASync
OK, USB power off is not the issue here as with power manegement off it still disconnects.....
....anyone familiar with asynckiller? Built into SwiftB ROMs and is always running...what does this optimise? Could it be the culprit
Asynckiller the culprit...testing now...
could be getting closer now....I reckon its this Asynckiller built into the ROM
see here...
http://forum.xda-developers.com/showthread.php?t=386948
Have shut it down with task manager and see if the sync holds....stay tuned
hey guys i've had the same problem too. the answer to your question is simple: if the screen turns off, the device goes to sleep, the activesync connection is terminated. simple as that. in most cases however, my diamond never goes to sleep mode when in activesync... so if yours does, that's a newer problem
Hi,
I have the same problem with activesync by usb. This is very annoying especially if you have to transfer large files, like maps with TomTom-Home.
It is not the standby-mode which causes the problem. Even without going into standby the connection get loss.
My solution for the problem is to use bluetooth for active sync. I never get disconnected even I stay connected for hours!
I assume it must have to do something with the usb-controller. When I connect my device as mass-storage with my linux computer and transfer much/large files, I can see a lag in transfer after some time. The transfer stops for some seconds and then it goes on again.
Maybe this is the reason why activesync lose the connection
Have ruled out asynckiller....this is not the issue. Brief correspondance with SwiftB and he thinks this issue has been around as long as WM6.1 as been i.e. MS Activsync issue (another one!!) oh so frustrating
I was having this same issue when using a generic cradle I sent off for to sit my HTC Touch Diamond in. I've gone back to the cable that comes in the box with it and suddenly no more disconnections! Are you all using cradles too?
Yep. Have the same problem. Using Vista and 6.1. It wasn't a problem with XP and WM 5, but has appeared with 6.1.
I don't think it is Vista, as it also happens on another machine with XP and 6.1. Also not to do with the power saving, screen sleep or 'phone sleep. I disabled these in turn and the 'phone still disconnects (it does seem to be the 'phone, not the PC - both Vista and XP work fine with two other WM5 devices, although Microsoft is as confusing as ever by saying that AS is no longer required with Vista, whilst selling WM that always requires AS, thus ensuring that AS on the 'phone has to sync with Mobile Connection Centre).
It has got better and worse during the 8 weeks I've had the 'phone - not clear whether this is ROM or application related, as I'm changing so many things at once. Clean ROM install seems to help, but then the problem reappears when all apps are back on the 'phone. Maybe it's not getting a necessary data connection signal from the PC? I'm running it from a Dell M1330 USB2 port.
Have a problem with my Diamond, its set to 15mins faster than real time (habit of mine) and only occasionally when it syncs with my Vista64 PC the time reverts to "real time".
I'm not sure if its syncing the time to the internet or via my phone carrier, tried to fix this under phone options on the diamond and activesync options to no avail.
This is driving me nuts as I'm using the phone as an alarm clock and it won't be pretty if I wake 15mins late for work...
Errrmmm...
I'm not sure what 'problem' you're stating here? If you're complaining that your PC corrects the time on your device when you sync, then you don't have a 'problem' with your device - that's what syncing does (amongst other things)!
.. or are you saying that you want it to correct the time, and it isn't?
Well to clarify :
PC clock and phone clock is 15mins faster
OCCASIONALLY (its done this in about 1 per 4-5 syncs) the phone reverts back to "normal" time (i.e. goes back 15mins). The PC clock is still 15mins faster.
This leads me to believe that the phone is updating the time either from the carrier or the internet (its set to use the PC's internet connection when synced)
Pesty_74 said:
Have a problem with my Diamond, its set to 15mins faster than real time (habit of mine) and only occasionally when it syncs with my Vista64 PC the time reverts to "real time".
I'm not sure if its syncing the time to the internet or via my phone carrier, tried to fix this under phone options on the diamond and activesync options to no avail.
This is driving me nuts as I'm using the phone as an alarm clock and it won't be pretty if I wake 15mins late for work...
Click to expand...
Click to collapse
To keep phone from syncing with PC time:
In ActiveSync on PC, right click on "Windows PC", click the "Settings" button. Uncheck "Synchronize Pocket PC date and time when connecting."
Thanks for the quick reply.
Unfortunately I'm running Vista64 and Windows Mobile center doesn't have that function, I've tried all the options looking for something similar for the past 2 days....
Thats odd - I always thought it synced with the PC's time.
Yeah I know, I've checked that extensively, its 15mins slower than my PC time.
I'll try and see if turning off auto-adjust for timezone/daylight savings helps