Database Develop

AKU2.3 PDA Mobiz Edition

For all who's interrested I've here the Mobiz Edition with some extra features.
ftp://xda:[email protected]/Up...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
for more details, look at:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=60589&PN=1

yea, a translation may be fine

I think the screens tell enough.
I will tell more later after I tested it.

In short, this one has:
*realplayer installed
*Contacts Backup
*GSFinder+
*Image Maker
*Mx Calculator
*Note M (MP3 Voice recorder)
*Opera Browser
*TRE Registry Editor
*a Stopwatch
* Media Player (not windows)
*vx Utility
*Xn View
*OMAP overclock
*SMS Backup
*Pocket RAR
also the GPS reg is already changed
+ some other helpfull shortcuts like:
Reset
SMS Sender
Recent Dial
etc.
regards

damn which ver to run! aku 2.3 mr clean.. 2.24 t-mob or now this ver! arg decisions decisions!

I had/have all 3 variants on my Wizard and like this one best.....
............Up until now.

but in reality i could just install these apps myself right?

jacob-mda said:
but in reality i could just install these apps myself right?
Click to expand...
Click to collapse
Yes, you can always install apps manually.

then poo no need in wipeing my settings out i dont really think i need these apps neways but if i did where could i dl them or is there a way to extract them out of the .exe?

After installing this ROM, I can no longer flash to other ROMs. During the ROM flash wizard, and after the phone does the initla reboot to the multicolor screen, the update fails and the installer immediately goes to recovery mode.
Has anyhone else seen this, and is there a fix?

mskovrinskie said:
After installing this ROM, I can no longer flash to other ROMs. During the ROM flash wizard, and after the phone does the initla reboot to the multicolor screen, the update fails and the installer immediately goes to recovery mode.
Has anyhone else seen this, and is there a fix?
Click to expand...
Click to collapse
I would try downgrading to the stock T-Mobile 1.08 ROM and then you should be able to upgrade to whatever ROM you want. If you can't even downgrade I'm not sure what you can do.

mskovrinskie, I've tried to Update my ROM, I managed without problems so I guess it's your phone or software causing the problems.
I used the original Qtek 2.17 update.

I personally think this ROM rocks. Ran the Cingular Connection cab from the shipped ROM and not much else. SmartsKey and Omap were already installed along with the other neat things Vilem referenced.
Seems very fast and stable but then again all I run is MS Voice and Adobe Reader as even the newest ClearView is too lacking for my needs. And most cool is that the big button dialer skins seem to work without the wierd graphics, etc I experienced with previous versions.
Just my two cents ...
Steven
chow

Link working
Everytime I click on the link I get the cannot find server page.... any ideas?

Vilem said:
For all who's interrested I've here the Mobiz Edition with some extra features.
ftp://xda:[email protected]/Up...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
for more details, look at:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=60589&PN=1
Click to expand...
Click to collapse
will this work with the 8125 and still let me use that SIM card for my calls? if so, what is the advantage to this over the others? thank you very much.

Yes it will work with a 8125.
Up untill now I still like this update the best.

Philly, try copy link location, then delete the file so you go directly to the directory.

Vilem said:
Philly, try copy link location, then delete the file so you go directly to the directory.
Click to expand...
Click to collapse
If you mean ftp://xda-developers.com/Uploads/Wizard/Roms/ there are
2 directories and 1 file
TMobile directory
Xelencin directory
2.17 radio only file
TMobile directory doesn't contain file.
Please adise.

ftp://xda:[email protected]/Wi...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
They moved the file, it's now here.

Thanks

Dial Up Networking

I need to enable the Dial up Networking on my WM5, P3600
I've downloaded a cab file and attempted it but to no avail. Anyone have a suggestion as to how to get DUN enabled?
Thanks

The cab out there is for WM6, NOT WM5. I guess it said so in the thread already.
Yes, I tried. Not working on WM5. If you really need it why don't you upgrade to WM6?

WM6 - Trinity
Which version of WM6 do you suggest that would give DUN support. I have always stayed away from the cooked ROMs but it looks like I need to go that route to get DUN working. Looks like my two choices are:
LVSW_Trinity_WM6_v2.0.1.1
mUn_2.01.TE_WWE_GPS
Do you have an opinion as to which one is the best choice?

dennis875 said:
Which version of WM6 do you suggest that would give DUN support. I have always stayed away from the cooked ROMs but it looks like I need to go that route to get DUN working. Looks like my two choices are:
LVSW_Trinity_WM6_v2.0.1.1
mUn_2.01.TE_WWE_GPS
Do you have an opinion as to which one is the best choice?
Click to expand...
Click to collapse
every WM6 rom DON'T have DUN profile...u must install after upgrading the rom (search for the cab around the forum)...
The only rom that include DUN profile is my last one (AX3L 2.0.8.1)

WM6
I am confused as to the process
>> Download: install Hard-SPL + OS v2.0.8.1 + Radio v1.46.00.11 + ExtRom + OEM Splash screen
I've downloaded the Hard-SPL.zip file and extracted it:
EnterBootloader.exe
Rapitool.exe
ROMUpdateUtility.exe
RUU_signed.nbh
RUUGetInfo.exe
RUUResource.dll
Do I alod need to download:
OSv2.0.8.1
Radio V1.46.00.11
Ext Rom
OEM Splash Scrren
??
How do I go about installing your ROM onto my Trinity?

Please use the guide at http://trinityguides.info

Registry not saving

Hello all,
I've been encountering this problem for ages and still haven't find a solution to it yet. Basically, I regedit so that the phone doesn't show contacts from SIM. After i soft-reset, the registry also resets and it still shows the SIM contacts. I've tried it through PHM RegEdit and Advanced Config 3.3 but no luck. Can anyone help me please

simonwong1989 said:
Hello all,
I've been encountering this problem for ages and still haven't find a solution to it yet. Basically, I regedit so that the phone doesn't show contacts from SIM. After i soft-reset, the registry also resets and it still shows the SIM contacts. I've tried it through PHM RegEdit and Advanced Config 3.3 but no luck. Can anyone help me please
Click to expand...
Click to collapse
Are you using a custom ROM or a stock ROM?

I'm using the uDK wm 6.5 21500 ROM

but this has occured with every ROM i've used so far, including Dutty V4 ROM

simonwong1989 said:
but this has occured with every ROM i've used so far, including Dutty V4 ROM
Click to expand...
Click to collapse
That's realled fd up! Have you tried cooking one of your own ROMs? Also, (this may sound bizarre) do you download the RUUs on the PC you flash it on? Do you flash with a VM? I used to download all of my SYS files on a Mac and it turned out when I copyed them to a Windows PC to cook and flash, ROMs came out screwy where no CAB files would install.
There are a ton of factors in this, but the best remedy is to try and download a stock ROM and download and flash that on device. That should clear up any corruption errors.

Just tired it no luck... =(. I use CustomRUU for my flashes. I have he unsigned HardSPL (can't remember which one) with the latest Blackstone radio and 2.04 ROM (uDK ROM) It has been happening since I first purchased it... its so frustrating. Only solution for me is to make a reg that loads at start up but i always need to press a dialog box to apply to regedit. Is there a way to auto reg on boot up of phone?

simonwong1989 said:
Just tired it no luck... =(. I use CustomRUU for my flashes. I have he unsigned HardSPL (can't remember which one) with the latest Blackstone radio and 2.04 ROM (uDK ROM) It has been happening since I first purchased it... its so frustrating. Only solution for me is to make a reg that loads at start up but i always need to press a dialog box to apply to regedit. Is there a way to auto reg on boot up of phone?
Click to expand...
Click to collapse
Did you try flashing from the SD?

Yep. tried it through the Bootloader and through CustomRUU. No lluck. Its quite frustrating beause it just keeps resetting. Other registries say though ie auto lock device in 5 seconds. That reg is perfect but its just the SIM wouldn't work.

simonwong1989 said:
Yep. tried it through the Bootloader and through CustomRUU. No lluck. Its quite frustrating beause it just keeps resetting. Other registries say though ie auto lock device in 5 seconds. That reg is perfect but its just the SIM wouldn't work.
Click to expand...
Click to collapse
Did you lock it again? You should uninstall HardSPL and put the SoftSPL back on. I do not know how to do this because I am on CDMA but stf will always be of help

Help needed reverting back to WM6.1

Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,

http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613

thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?

Try to hard reset.

tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?

Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL

thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks

I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?

a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated

terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824

thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.

if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app

The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.

thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,

fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result

Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.

TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.

Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.

(A Few) TOPAZ QUESTIONS AND ANSWERS HERE!!!

Edit: We now have a whole Q&A Forum...

Ok theres something I've been wonderin, it might be a toddler question but what are the guidelines for full Backup/Restore from one ROM to another (with same rom/sense build)? (using SPBbackup, RescoBackup, or SKtools)
And when I know I can't do a FULL restore what can I restore? (ex: Dutty r15 23569 --> Nhathoa 23123) prob not registry, but what about sys files?
Or if its just a different version of the same rom.. for example --
-- Full backup Energy Cookie Dinik 23569 (july2) -> Full restore after flashing Energy Sense2.5 standard. (and lets say I skinned a few things and installed apps like cleanRAM, IconChanger, Opera 10.. before the backup) -- Would it work?
Thanks.

Scabes24 said:
Ok theres something I've been wonderin, it might be a toddler question but what are the guidelines for full Backup/Restore from one ROM to another (with same rom/sense build)? (using SPBbackup, RescoBackup, or SKtools)
And when I know I can't do a FULL restore what can I restore? (ex: Dutty r15 23569 --> Nhathoa 23123) prob not registry, but what about sys files?
Or if its just a different version of the same rom.. for example --
-- Full backup Energy Cookie Dinik 23569 (july2) -> Full restore after flashing Energy Sense2.5 standard. (and lets say I skinned a few things and installed apps like cleanRAM, IconChanger, Opera 10.. before the backup) -- Would it work?
Thanks.
Click to expand...
Click to collapse
Basically,the only clean restore would be the same ROM to the same ROM, minus PIM data.
Let's say you're running Dutty HG15 23569 and he releases HG 16 23569 with fixes, whether registry, programs whatever, you would end up restoring over the changes.
With Manila, even if you back up your own ROM and restore, its not a good idea to restore your PIM data back to Manila as its been known to cause it to crash. However PIM backup works well for this.
I'm not saying it 'won't' work, but it 'can' cause issues.

I see.. Thanks!
So when restoring a backup from HG r15 to r16 like u said, besides PIMbackup, would any of these options be safe to restore
-databases
-registry
-system files
-device
-force rom upgrade (im not even exactly sure what this action does, just an option in SPB)
-Also Settings exporter from the same CHT ver.
Thanks for the help!

Use pim backup!!!
you better off using PIM backup and you wont screw it up...Use mortscript to create a script to install the files you need on first boot...(XDA-UC is written in Mortscript.). Just make .reg files, .cabs and what ever else you need , edit XDA-UC to your needs and you are ready to go!

Scabes24 said:
I see.. Thanks!
So when restoring a backup from HG r15 to r16 like u said, besides PIMbackup, would any of these options be safe to restore
-databases
-registry
-system files
-device
-force rom upgrade (im not even exactly sure what this action does, just an option in SPB)
-Also Settings exporter from the same CHT ver.
Thanks for the help!
Click to expand...
Click to collapse
Force upgrade is for different ROM builds. I wouldn't use it.
I use a combination depending on what I am restoring.
For same ROM restoring, I use SPB Backup with PIM disabled, and Google sync (gmail as exchange server) for contacts, e-mail and calendar.
For different ROMs, I only restore Gmail, my exported registries such as my sound settings, owner info, and various other tweaks I apply and databases.
Naturally any program specific settings would be fine.
As far as registries and system files, you could be restoring something that's incompatible or an older version.
Sashimi and User Config are 2 alternatives for auto installing your stuff.
Hope this helps.

Yeah I use XDA_UC with very few configs cuz I'm never sure if certain stuff will restore correctly. I seem to have trouble with settings exporter.
How do I restore specific program configs (bsbtweaks, advanced config, Tabs) without using the UC exporter or a full restore? Can I do it with SPB?
Because I like UC but just for CABs and PIMrestore (sometimes CHTedits)..
Sorry for all the Q's, I've been flashin a lot lately and always end up doin manual config labor and soft reseting a million times. But thanks a lot for the help!

I should note that the reason I don't use the Exporter is because I used it a bit before and when I would import the settings the bottom row of quicklinks would be all mangled and everything seemed glitchy. does this mean I was doing something wrong? I'm not sure but I think I remember NRGZ28 mentioning something in the changelog about an update/fix for UC so maybe I just need to try again.

How can I tell which Hard SPL / Factory SPL I have?
Hi All,
I have been reading the forums for a couple of weeks and I really want to flash my AT&T Pure with a new TOPAZ ROM. However, I got a second hand PURE and I don't know if they have done any modifications yet.
How can I tell which version or if they did change the stock SPL? Also, if there was a fail during the upgrade of the SPL would it still show the version and the phone still be functional?
This is what the bootloader screen says:
TOPAZ210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
Turbo HW/Turbo SW
Thanks in advance!

snailspeeder said:
Hi All,
I have been reading the forums for a couple of weeks and I really want to flash my AT&T Pure with a new TOPAZ ROM. However, I got a second hand PURE and I don't know if they have done any modifications yet.
How can I tell which version or if they did change the stock SPL? Also, if there was a fail during the upgrade of the SPL would it still show the version and the phone still be functional?
This is what the bootloader screen says:
TOPAZ210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
Turbo HW/Turbo SW
Thanks in advance!
Click to expand...
Click to collapse
It should say
SPL-2.51.OliNex or 1.83.OliNex
And it depends on the error you encountered. Did you try the upgrade already?

Thanks for looking into this. Well, I tried once to do upgrade (before checking what SPL version I had) and I got everything, but then the screen just showed 0%. I waited for a little bit, but then I just soft reset because it wasn't progressing. It shouldn't take that long, right? From the thread on the Olinex post, it seems like it should be over in a minute or so.
So does this mean I still have the stock spl?

snailspeeder said:
Thanks for looking into this. Well, I tried once to do upgrade (before checking what SPL version I had) and I got everything, but then the screen just showed 0%. I waited for a little bit, but then I just soft reset because it wasn't progressing. It shouldn't take that long, right? From the thread on the Olinex post, it seems like it should be over in a minute or so.
So does this mean I still have the stock spl?
Click to expand...
Click to collapse
Possibly, I just upgraded the latest version right when I got the device. I did have a bit of trouble with my upgrade though. Did you follow the steps exactly?
I ended up having to install a cab file (enablerapinew). Then it worked fine.
You can always try removing the battery/SD/SIM for a min or 2, put em back in, establish connection, then follow the steps.
Otherwise you should read the troubleshooting and Q&A.

SPL-1.83.0000 is the stock SPL I'm pretty sure by the way

Scabes24 said:
Possibly, I just upgraded the latest version right when I got the device. I did have a bit of trouble with my upgrade though. Did you follow the steps exactly?
I ended up having to install a cab file (enablerapinew). Then it worked fine.
You can always try removing the battery/SD/SIM for a min or 2, put em back in, establish connection, then follow the steps.
Otherwise you should read the troubleshooting and Q&A.
Click to expand...
Click to collapse
I tried again following their "automatic flash" but then I got the error of the server being down or something. I will try again. I have flashed ROMs on other phones, but this one is giving me a bit of a problem. I also tried the Manual version, but it didn't put the phone in the bootloader mode, it kinda just stood there.
So you followed the directions like they posted? Any other hints or tips? I installed the enablerapinew too.
EDIT:
I figured it out, I am such an idiot. Thanks for your help. After installing the enable I did a soft reset. That was what I did not do. Thanks. Any recommendation on a stable ROM? I am looking at Nhathoa's

Nice, yeah NhatHoa is good. I've been using the Energy ROMs.. close-to-stock and fully loaded versions available.

begin with htc pure rom install
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.

knightto said:
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
Click to expand...
Click to collapse
Check out this thread first, it is the pre-guide to learn the basic:
forum.xda-developers.com/showthread.php?t=585457[/url]

knightto said:
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
Click to expand...
Click to collapse
Do you have Hard-SPL already?

Can't get sms dialog to automatically rotate to landscape mode
Hmm, I'm still not sure if this is the right thread to ask a general, non-rom-development topaz question... It says so in the first post, but the thread is located in the rom development section - strange...
Anyway, I'll try: I'm using the latest cookie sense 2.5 energy rom for my diamond2, but the problem existed on all previous (energy) rom versions - whatever I try to add to the touch tools' rotation manager (or g-config), I can't get the sms writing dialog (htc "threaded" or "normal" version) to automatically rotate to landscape mode when I turn my phone. Nothing happens... I have a default hard button assigned for doing that and that works flawlessly. Other apps added to g-config rotate automatically...
I'm desperate, anyone willing to help? Is there some setting I have to enable or some registry tweak to apply or something? I searched the forum but users don't seem to have any problems with that, so I must be doing something wrong...
Thanks!

About the Touch diamond 2 Resitive touch screen problems ^^; , My Lovely diamond 2 if there cold , My diamond 2 automatically Touch in the center .. , Can you help me ?