Hi All,
I have just bought a HTC Touch Diamond 2 (Topaz) and its very great Device. I have ONLY ONE problem which is in the music player (The one that in home screen tabs).
The Problem:
> When I play a music and then press the power button to turn off the screen it turns off and after 10 seconds the music stops and when I press the power button again I found that All music disappeared and MicroSD card is not recognized (The device don't show the storage card like its not there!).
I have tried to turn off the screen with a Freeware called (screen off) but it the same problem. Also I tried to leave the phone for 10 minuets until it automatically turn off and also I got the same problem.
Please, Help Thats my ONLY problem with this great device I have to leave the screen ON in order to play music.
I have the same problem as yours
I tried every thing
formated my SD
Nothing works
but when i tried TESS v2F Rom every thing worked fine
any other rom keeps making this problem
any way I suspect this maybe due to low quality SD as i think mine is
Related
Hey,
I had gotten to sample the HTC Touch Diamond...and thats all. I got it as a gift from overseas (so its a GSM -simcard- phone). Long story short, I didn't want to buy the phone from the local wireless provider because I'd be stuck with them. I open up the HTC box, turn on the phone, calibrate, take a few pics, and then I decided to put in a simcard. The phone was on at the time and I wanted to make a few phone calls to test out the new phone. I have no idea what happend, but the phone just turned off. I turn it on, and there is no lights, no screen, however the phone did turn on (i felt the vibration, and heard the startup sound). I took out the battery, and put it back in a couple of times and I finally got to turn on the screen and lights, however i recieved a werid message, and it didnt seem that my buttons at the front were working right (they worked fine before when i took pics and listend to the demo music), so I unplugged the battery and put it back in..Since then I have not been able to turn on my screen.
Here is how I know the phone is on, but there are no lights and no screen:
1. the boot up vibration
2. the bootup music
3. the volume up and down
4. I am able to touch the screen to turn up and down the volume.
5. When I put in a simcard, the phone does a ring every min or so (I have no idea as to the cause as i cant see error messages)
Now this is what I did to try to fix it:
1. I tried soft reset , however pressing the reset button does not seem to make the phone restart as i can turn up and turn down the volume no matter how long i press the reset button
2. I tried a hard reset, that doesnt seem to work either. (btw im guessing the confirmation message screen and pressing the volume up key) I think that the reason why steps 1 and 2 are not working, is because the phone does not seem to want to restart!
3. I tried taking out the battery and putting it back in..but i never did it for longer than a minute
4. I tried to update the rom, however the rom update application gives me a "Connection error" even though i have my phone plugged in. If i am supposed to set the connnection up from the inside then nm i cant do it cuz i cant see a thing.
5. I tried charging the phone (through USB and the power outlet)
Does anyone have any idea what happend? how can HTC Touch Diamond go from new to blank screen in about 5 minutes of usage?
plz give me all suggestions u can come up with...plz try to help me. Ive been waitign 2 years for a good phone, and now that I have one, I cant use it. Help me!
remove the sim card and see if it acts normal.
is it already unlocked?
the sim card has been removed, reinserted , and removed again.. yes the phone is already unlocked as the simcard apparently worked ( i made a phone call and the phone rang)
has no one ever come across my problem?
bumping...
hello, i have got a problem with my kaiser, it is tuning off (entering in standby) in 10 s no matter the config than i make
thanks a lot
Oddly enough, I'm having exactly the same problem.
No matter what is running, even apps that are supposed to keep the device from entering sleep (like TomTom, etc.), it always enters sleep after about 10 seconds. What's weird too, is that if I press any physical button on the phone, it resumes from "Sleep" instead of having to push only the power button like you would normally do.
Any suggestions would be appreciated, I have a "AT&T Tilt" Kaiser, and am running a 6.5 rom w/ the eMobile radio.
Hello bro
i found a semi-solution hehehe
starting de audio manager and let it play a part of a music, after that it dont solve all problem but reduce it, some times the kaiser turn off after 2 min as the setting, some times it turn off in 10s
the most strange thing is than the pda never have this problem until today in morning
my rom is a pda-corner wm6,1
thanks
Don't know if it the same problem...
Hi guys got a kaiser bout a month ago and i love the phone haven't done any modifications to it all stock at&t stuff. Having a pretty unpleasant problem... when i go to turn on the phone the at&t logo pops up and then after a couple of seconds turns off, the battery is charged! I seem to be able to turn it on if i open the sim card door and leave it open till the WM6.1 logo appears, but then when i turn it off to put in sim card it turns off in seconds and does not come on. Now when it does happen to stay on for me after its been asleep for a while the touch screen stops working...
all stock kaiser
have done may hard and soft resets nothing seems to be working
don't have sync software
willing to do anything
HELP!!!
maybe you can put a modificated rom, my sotck phone come with wi-fi, internet and e-mail blocked. i put a modificated rom and it unlock all features. its just a try, but dont forget to read all the wiki about the replacement of the rom or you can brick you phone
good luck
i'm also looking for how to change this as tomtom on the move in the car is useless when the phone locks
Hi i have a few issues on my diamond. I hope you guys could help..
1st issue: lately my diamond keeps on resetting by itself.
2nd issue: later I've learned that when I record my voice using the software within the ROM, I don't hear anything but when I record my voice using my htc headset/earphones there is a sound.
What I did was:
This day I've flashed a new rom (Energy Rom) into my Diamond. It works ok then I flashed the Radio (Radio_1.13.25.24). I was able to use my diamond for a few hours.
Now..
3rd issue: My diamond is not powering on..
What i did before this happened was...
I pressed and hold the power button for about a few seconds so the ShutXP would pop up and I could soft reset my diamond.Before I clicked the soft reset button, I was checking out all the functions of it. then i clicked, a little icon,which is the Setup Timer Action. Here's the setup:
Action: Turn Off Pocket PC
In: (i don't exactly have seen the time indicated)
As curious as i am, I Clicked the Set Action button. It did shut my diamond off. Then I tried turning it on, but all it was doing was vibrate and the screen was black. At first I was hearing the start up sound a few times but later it didn't hear it anymore. I plugged in the charger but there's no white light on the circle button which used to have a light on the borders of the circle button when plugged in the usb cable. I tried pressing the power button plus the Volume down so the bootloader would appear but it did not. What shall I do?
Are you sure that the screen working because the phone vibrate and play the startup sound so if think its the screen that have som serious problem !!
HELP
I also flashed a new rom (Energy Rom) into my Diamond before.
It cannot run window mobile6.5.........how can I do???
I cannot connect to PC .......
I recently also had a similiar problem, after attempting a flash of the Rom, the ROM update stopped halfway through and reported that it had lost connection to the device....
The whole phone would not vibrate/power on, nothing - no glowing ring around the middle button to indicate it charging at all.
I had to return to the repair centre and somehow they didn't notice that I had modified the firmware and replaced the whole phone for free citing a hardware issue ...
Doesnt sound good if you cannot hard reset the device
Hello,
I have a problem with my ppc (with Ather's Diamond WM6.1).
After playing mp3 for a while it sudently stops playing after a random time. Already tryed Pocket Player, MortPlayer, Pocket Music, but it happens with them all. What could it be?
I cannot do a Hard reset because I don't know how. Pressing the Hard-reset buttons resets the PPC with the option of going safe mode, nad it does'nt hard-resets like it use to in WM2003.
Any clue?
Thanx
Hard reset is different to hr under WM2k3! I don't know if it helps with your mp3 problem.
Here is how you have to hardreset your device :
Press Reset Button and hold down Camera Button + Record Button.
Hold them pressed until the "Boot Options" menu appears on the screen.
Attention! Hardreset kills all your personal-data, unless you save it first!(Pim-Backup)
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.
Thanx for your reply,
You were right, I hard-reseted , instaled Pocket Player on a fresh WM6.1 but after a while it stopped playing, so... Still don't know whats happening.
Any idea?
Ok, now i'm getting pissed off.
Tried Wm6.1 and Wm6.5 and keeps stopping with no aparent reason.
I just don't get it.
Any help??
have you tried playing a diferent file? are you using headphone to listen? or listening from the speaker? try another MP3 File and let me know
Does phone go to standby mode or locks keyboard?
I foun the problem: SD Card
Dont know why but with a 2gb card everything goes smooth,but with a 4gb card the problem comes to live, i even tried partitioning into 2x2gb but no luck.
So I guess I'll stay with the 2 gb and save de 4 gb for my camera.
Thanx for your help
Hi
I use my HTC Kaiser (tytnII) since last week. I bought a 4GB Micro SD card (CnMemory) to install tomtom, music, films etc.
Everytime I push the Power button, the "old" time appears, before I put it away (e.g. switch off at 18:55, switch on at 19:20. a few seconds the 18:55 is visible, then the time refresh to the actual time 19:20)
Due to the fact, the alarm don't work when its off/standby....
Thx
4 help