Related
Short question, maybe someone knows. If I want to add a new Server in MMS Configuration the [New] button is not responding.
How can I re-activate this button.
anyone, help would be appreciated.
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
_Nomad_ said:
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
Click to expand...
Click to collapse
Yes I guessed that one, therefore I was hoping to get some "other" advises before I hard-reset and notice the same.
I would search for a cab named "Set_up_MMS_folder" in before going back that far. You already have a folder, but reinstall could help fix whatever you are missing.
Good luck.
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
_Nomad_ said:
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
Click to expand...
Click to collapse
No it didn't work, I was re-installing my phone. I installed my normal things, as always, like spb today etc. This time I flashed the std T-mob ROM because I was a little tired of all the small problems I had with the home-cooked and now this...........
The mms folder and everything I have, it's only the stupid button which doesn't work.....
........It's there, but even he color shows it's not active.
Im seriously starting to believe the so called gurus in here arent exactly up to snuff ....so to speak. your problem is simple... you have to browse to regedit..somehow(!! can you figure that out?)
oh, just got it:Total commander, tap the two dots in far right (..)
tap the root (\\)
tap registry/hklm/software/arcsoft/...MMSUA/CONFIG/UI/
DRUMROLLLLLLLLLLLLLLLLLLLLLL... now YOU figure out which setting to enable!
nah, it should be EnableServerEdit ...i think, change the value to '1'
voila
THIS DOES NOT MEAN MY MMS IS WORKING...... I HAVE A PERSISTENT PROBLEM BEING UNABLE TO SEND MMS & everyone is CLUELESS!!
aaaaarghhhhhhhhhhhhhhhhh I WANT TO DIE!!!!!!!!! lol
ifull, thanks for the advise, this did the trick. Thanks again, I'm not into registry editing.
I think my problem, as you said, was so simple that the experts thought I would figure this out by myself, LOL.
Thanks again, if I can help you in someway, please PM.
What are the right mms settings
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
settings
here are the settings that should be there according to tmo website - http://support.t-mobile.com/knowbase/root/public/tm21387.htm
on mine those are right but what I think the problem is this, when mms is sending it keeps getting interupted by gprs trying to connect. is there a reg hack to let mms send without being disconnected????
I believe in regedit there are some errorlog.txt files that show you the WHOLE transcription of your attempted outbound messages. If I find mine, I will post it as it shows where the delivery went wrong.
so are you trying to say your 'mms fix' of a day or so ago is not quite "fixed" or what?
re:
this whole mms thing is starting to make me feel like its a tmo network issue and not the device, just never know...but I did flash my rom to X's 2.26 w/ 2.47 radio
mms fix i think
once u hak the reg and change the setting as listed earlier to allow settings edit... click on tmobile mms settings and it should show the settings that were downloaded from tmo...but u want to change the option that says connect via mms --) to connect via data..
I just did that and it sent right away...
it works, click on the tmobile mms server and then change the connection to via data instead of mms... I just sent a message to my self and it sent it out my outbox in less than 30sec for a 75k file
robpet2 said:
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
Click to expand...
Click to collapse
I think the settings are operator dependend
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
Click to expand...
Click to collapse
Yes thanks again, I had to do some regedit fixes, like I deleted the whole tree below what you mentioned. Now I'm able even to set as default.
I renamed the thread, because I know a lot of people have problems with MMS.
error log
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
Click to expand...
Click to collapse
yep I got error log msgs but it still send the pics
Thanks!!
More proof how valuable the information shared here can be.
no matter what web page i try to acces it keeps giving me this probelm. does anyboyd have a fix for this. im usin wm6 pd v3. I really thank you guys. i already tried searching and couldnt find anything out.
deviusdragger said:
no matter what web page i try to acces it keeps giving me this probelm. does anyboyd have a fix for this. im usin wm6 pd v3. I really thank you guys. i already tried searching and couldnt find anything out.
Click to expand...
Click to collapse
when is this ? using WIFI connection ? gprs data ? BT internet ?
just my regular gprs connection. im thinking maybe something in my registry could have been messed with but i wouldnt know what to check for. i was looking at the wiki but still cant find the problem. any ideas bro?
The same problem
deviusdragger said:
just my regular gprs connection. im thinking maybe something in my registry could have been messed with but i wouldnt know what to check for. i was looking at the wiki but still cant find the problem. any ideas bro?
Click to expand...
Click to collapse
Hi, I have the same problem from time to time:
-first, I'm unable to change the homepage for PIE. I set it up but once I close the options menu it comes back to empty.
- sometimes it says "the page can't be showed" and everything seems ok in the connection. it seems that changing the active connection in settings -> conn -> conn it works again.
A little bit dissapointing...
It also changes the name of the proxy in the connection config without intervenction and then it doesn't work (but this happens when I connect through AS).
I'm using WM6 clean version (not the pdaviet).
for some really really weird reason the only web page that i can bring up is the www.cingular.com website. nothing else. that is just weird. so now i have to resort to opera mini but i just want my PIE to work. anyone got any other ideas? a little help
using pdaviet3 .. no problems untill now even google personalized homepage works great....
I GOT IT FIXED!!!! Good thing i have 2 8125's. so i just looked at the registry settings on my old one and i saw that for user agent it had HTC-8100 mozilla and all that good stuff. so got it fixed with sktools and now all is great. so thanks to anyone who tried. but yeah pd v3 is working awesome! Love it
deviusdragger said:
I GOT IT FIXED!!!! Good thing i have 2 8125's. so i just looked at the registry settings on my old one and i saw that for user agent it had HTC-8100 mozilla and all that good stuff. so got it fixed with sktools and now all is great. so thanks to anyone who tried. but yeah pd v3 is working awesome! Love it
Click to expand...
Click to collapse
And could you please share which keys have you modified, please? Because I continue with the same problems...
ok if you have sktools or something that shows you your registry settings this is how they should be:
user agent:
HTC-8100/1.2 Mozilla/4.0
user agent (version)
MSIE 5.5
user agent (platform)
Windows CE
user agent (description)
Default (Windows CE)
these as the stock settings. if they dont look like this then there might be a problem. Good luck
i'm in the registry but I did a search through the registry and can't find any mention of user agent, can you give me a full path? thanks
okctmaxxer said:
i'm in the registry but I did a search through the registry and can't find any mention of user agent, can you give me a full path? thanks
Click to expand...
Click to collapse
I suggest that you buy sktools. its an awesome program and there you will see what i was talking about. Or atleast use the trial version and then get into the tune up! option. and then click on the pie tab on the bottom and you will see all that good stuff buddy. try out. hope this helps you out.
okctmaxxer said:
i'm in the registry but I did a search through the registry and can't find any mention of user agent, can you give me a full path? thanks
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Interneet Settings\5.0\User Agent\
Hi all
I've created an application with which you can send SMS using the VOIP Provider VOIPBuster.com!
They offer free SMS sending for lots of countries!
It's the first beta.
You can download it here:
www.ruttensoft.com/files/WMSMSClientVOIPBuster.zip
It has no CAB yet, so just copy the exe-file to your device and start it.
Then go to Settings and enter:
Username (VOIPBuster Username)
Password (VOIPBuster password)
Phone Numbe (Registered with VOIPBuster)
Your contries Dial Code (e.g. +41 for switzerland)
The application will load all your contacts from your mobile database!
After setting the settings, chose a contact and write a message (maximum of 159 letters) and click on send (make sure you have internet coverage)
NOTE: For an unknown reason, Sometimes VOIPBuster gives back an error message, even though the message was sent!
Currently it is made for Smartphone Devices and I've implemented Portrait and Square support (e.g. s730)
Post your comments here!
Thanks
Sven
www.mobilehelp.ch
www.ruttensoft.com
www.mobiledevices.ch
wohoooooo thanks so much for realizing my request. i will try it soon
EDIT:
i was trying to send an SMS while my phone was connected to my computer using the USB cable. it didnt work!!! but now i disconnected the cable and sent the SMS via GPRS/3G. the sms arrived!!!! and it works
HOWEVER;
after SENDING the SMS i also get the error message that the message was not sent or something.
hope you can fix that problem soon, as it is important to know whether the SMS arrives or not..
thanks a lot for your effort!!!!!!!!!!!!!!
Actually if there is only a simple error, it has always been sent on my device. If there is really a problem, you will get an exact error message (no balance, number false....)
I dont know why this is, I get that "Error" back from the VOIP Server so I cant fix it I'm afraid.
But yeah... I have never gotten this error and it was not sent... so you can test it a bit and if has always been sent while this simple error appears, I will deactivate it...
For USB: It's working here... Does your internet connection work while beeing connect on usb?
yes internet available while on USB. but it doesnt matter really.. at least it works though 3G etc.
you might want to disable the error message... its very annoying and loads for ages before it comes.
the GSM VOIPBUSTER Client shows THE SAME error... thats remarkable. implies the error is from the voipbuster server.
Ok I will disable it
awesome, thanks!
hey wat kind of connection does it use to send the sms, dont have a data plan so will simple wifi connection due? dont want to get a bill of charges afterwards . thanks again we all needed something like this. should port this to the smartphone general forum as it'll help everyone . good job
i'm getting an unexpected error when i enter settings, happening to anyone else?
makaveli86, do you have the Wings?
When do you get the error, by clicking on "save"?
It takes the same connection as the Internet Explorer would do.
So if connected to WLAN it should take WLAN...
If the device you've sent the SMS to is not "on", so could not directly get the SMS (but will later if it is turned on), the VOIPBuster server is also giving back the "Error"
SO I will just deactivate that... If there is really an error, it will show the correct error
oh you created it specifically for the wings? thought it was a smartphone app in general, i have the vox was hoping it would work on any smartphone...is there anyway you could find a way to do that because i know a lot of people who were looking forward to this.
Of course... it should also run on all other devices.
But I had no time yet to test it on other devices, mainly on pocketpc I will have to test some more
ohh ok..well i'm having troubles getting into the settings menu (currently running it on a s710 htc vox) so maybe if someone else that has the vox as well can confirm this for me? or if you dumdium get the chance to run some tests and see wahts up? i'll be glad to help if you need it
anything???
i had some problems too at first
then restarted and then it was ok
it kept saying the login details were wrong or something. now it works
restartd
A.Bagatov said:
i had some problems too at first
then restarted and then it was ok
it kept saying the login details were wrong or something. now it works
restartd
Click to expand...
Click to collapse
ya just retried it, still same thign. did a few reboots nothing.
bagatov, you using the s730? how responsive do you find that phone? are you satisfied of its performance?
hey
i use s730 and i love it. but the ram could be bigger. sometimes when i read RSS news with spb insight, listen to music with TCPMP and surf the web with OPERA stuff gets closed due to lack of ram. thats very stupid. but im sure an update will fix it. it also could be faster, but i hope htc will release the drivers to unleash the full potential of the 400 mhz
Dumdidum said:
Hi all
I've created an application with which you can send SMS using the VOIP Provider VOIPBuster.com!
They offer free SMS sending for lots of countries!
It's the first beta.
You can download it here:
www.ruttensoft.com/files/WMSMSClientVOIPBuster.zip
It has no CAB yet, so just copy the exe-file to your device and start it.
Then go to Settings and enter:
Username (VOIPBuster Username)
Password (VOIPBuster password)
Phone Numbe (Registered with VOIPBuster)
Your contries Dial Code (e.g. +41 for switzerland)
The application will load all your contacts from your mobile database!
After setting the settings, chose a contact and write a message (maximum of 159 letters) and click on send (make sure you have internet coverage)
NOTE: For an unknown reason, Sometimes VOIPBuster gives back an error message, even though the message was sent!
Currently it is made for Smartphone Devices and I've implemented Portrait and Square support (e.g. s730)
Post your comments here!
Thanks
Sven
www.mobilehelp.ch
www.ruttensoft.com
www.mobiledevices.ch
Click to expand...
Click to collapse
did you post the new version of this app where the error message is removed?
thanks
i'm guessing hte program is done with?
I would like to find some way to use a VPN Client on my Wing to access secured internet connections. I can connect to the WiFi network with my Wing, but cant get anywhere without going through the Cisco VPN Client login. anyone have an idea? thanks!
Bump? anyone? please... this would reallllly help me out!
Please do not bump or doublepost unless you have had no answer for so long that your post in the second/third page and it has been at least a week. I, for example, hadn't been to the site in the last three days. As far as an answer, I don't know. I've read about it on a non-Herald forum here at xda, but I can't remember where.
EDIT: What about this?
Its an emergency, need to get this working A.S.A.P. and believe it or not, i bumped it when it was at the bottom of the second page.
Look at my update post.
ivanmmj said:
Please do not bump or doublepost unless you have had no answer for so long that your post in the second/third page and it has been at least a week. I, for example, hadn't been to the site in the last three days. As far as an answer, I don't know. I've read about it on a non-Herald forum here at xda, but I can't remember where.
EDIT: What about this?
Click to expand...
Click to collapse
There's a vpn option in connections, but I didn't succeed to connect.
Now I'm trying the ovpnppc. But I also didn't have any luck yet.
-> could be because of my schools vpn, don't know the reason it doesn't work
ivanmmj said:
Look at my update post.
Click to expand...
Click to collapse
Hmm this seems promising, thanks! ill take a look into it, see if i can add the proper profile to access the VPN im trying to connect to and ill report back if sh*t hits the fan.
It seem like its working on helard. Check this post on open VPN forum.
http://ovpn.sq7ro.net/ovpnforum/viewtopic.php?t=230
nKiwan said:
I would like to find some way to use a VPN Client on my Wing to access secured internet connections. I can connect to the WiFi network with my Wing, but cant get anywhere without going through the Cisco VPN Client login. anyone have an idea? thanks!
Click to expand...
Click to collapse
You should try out the bluefire mobile client - it is compatible with the Cisco 3000 concentrator. they give a 2 week free trial so you have time to test it.
Link:
http://www.bluefiresecurity.com/downloads/
prscott1 said:
You should try out the bluefire mobile client - it is compatible with the Cisco 3000 concentrator. they give a 2 week free trial so you have time to test it.
Link:
http://www.bluefiresecurity.com/downloads/
Click to expand...
Click to collapse
$79.99!! hoooly crap!... will test, thanks...
Guys and Gals, looking for some more people to try this out. Having some problems with certain things... just looking for some more testers.
http://www.yeigo.com/
Praygo said:
Guys and Gals, looking for some more people to try this out. Having some problems with certain things... just looking for some more testers.
http://www.yeigo.com/
Click to expand...
Click to collapse
IM Iall for it!
i will give it a go
Great, they were having problems with MSN service but they fixed it. Im still having problem with facebook chat (the main reason I downloaded this) but I think the problem might be with facebooks service, not just yeigos. Just waiting it out
Praygo said:
Guys and Gals, looking for some more people to try this out. Having some problems with certain things... just looking for some more testers.
http://www.yeigo.com/
Click to expand...
Click to collapse
Suggestion: Put the current chats on a different tab
And of course add file transfer for yahoo/aim/msn
kinda sucky
well their sign up process kinda sucks. I've been waiting on an SMS for several hours. After submitting your phone number and a supposed text is to be sent, they display a page of the next steps. It says if you don't get the SMS text message, you should visit the site from your mobile device. WHAT A JOKE.. I'm using PIE to browse their site and it's not even a mobile page.
if they can't get this simple stuff right what the hell can they get right?
I got the sms instantly.
ChumleyEX said:
I got the sms instantly.
Click to expand...
Click to collapse
I still dont have the sms.. and since I posted I tried 2 more times.
I got the SMS instantly too. There is a Yeigo worker watching this thread... maybe he will chime in.
Here are some of my sugguestions.
To improve this I would say to intgrate a notification into windows... when its minimised if you get a IM that it shows a notifiaction icon, not just makes the noise. (like windows msn messenger) Also, you should be able to sort by what IM service your using, also there is no file transfer or voice clip.
Navigation is also tedious going between conversations and the Instant message main screen.
Can anyone make a Voip call not using wi fi? I cant!! The program crashes to today screen!!
ChumleyEX said:
I got the sms instantly.
Click to expand...
Click to collapse
duplicated. oops.