Database Develop

Key Maping Program

Hey all hers an app that should help with remapping the keys and on the web site theres diffrent language packs
i will uplaod the prog plus the wwe rom (qwerty) to qwertz keyboard

Can the program also remap soft key on the Phone screen?
When using the Phone screen you can select Contacts in the bottom of the screen. Can the program also change this bottom or link it to an other program than Contacts?

Do you have an azerty mapping for french keyboard?
Can't find it, thanks.

wm6 PDAVIET4 keyboard buttons z & y

hi everyone, yesterday i've upgraded my k-jam with new rom pdaviet4, it's all fine the os is faster than ever, but i have a problem with the keyboard when i press the z button on screen appear an y and vice versa.
someone have a suggestion to fix this problem?
i've tried to change
HKCU\control panel\keybd\locale 0407 to
HKCU\control panel\keybd\locale 0409
but when i restart the device the value come back to 0407
HELP ME PLEASE

after changing the registry, let it dry for a minute then soft reset..

actualy dont reset with the reset button power it off completley by pressing the off button till it goes off

ok thanks, i try

u can install RegistryWizard and change the language through there settings, softreset, and ur good to go

Hey guys, got the keyboard remaped that's not an issue, however I've just noticed that the 'functioned' keys are not quite right, if I hold fnct-Z I should get a '-' but I get a '~' and X give me a '-' and C a '_'
Not a real showstopper but kinda annoying.
Any ideas?

I had the same problem. On top of that, most of the secondary keys were screwed.Let us know if any of those solutions work.

This is for the Wizard Variant for US (8125 & MDA). I am not sure about European layouts etc. But I have the above mentioned 2 devices and with this settings, they work for me.
HKCU\Keyboard layout\Preload ------ Default (REG_SZ) = e0010409
HKCU\ControlPanel\Keybd ------ Locale (REG_SZ) = 0409
Ok Back to the Grammys.

I am not using the PV version. However, on the Orwell version, the locale key does not exist in the registry. The locale key was add-on by PV so the keyboard will work with the local language.
You guys can try to delete the locale key. Turn off your Wizard and turn it back on to make the fixed stick. It should work correctly without the locale key.

mtvn said:
I am not using the PV version. However, on the Orwell version, the locale key does not exist in the registry. The locale key was add-on by PV so the keyboard will work with the local language.
You guys can try to delete the locale key. Turn off your Wizard and turn it back on to make the fixed stick. It should work correctly without the locale key.
Click to expand...
Click to collapse
that worked perfectly thanks man!

Is there a way to get English UK added to the regional settings option

Fuze - Fn+SPACE doesn't bring up symbols menu :\

i have a at&t fuze and on my stock rom and many other pressing Fn+Space would bring up the symbol menu.
however i am running Da_Gs latest 6.5 and Fn+Space does nothing.
any help?
hopefully a cab or regedit rather than reflashing

can anyone help? this is a problem as i use symbols heavily

try these cabs from shlomki http://forum.xda-developers.com/showthread.php?t=474192

no, the problem is not my keyboard layout- the problem is the symbols menu just isn't on my phone. all other Fn commands work fine

did you disable xt9 to bring back the old word suggestion?
I've been searching all over the place with no satisfying result

i didn't cook in HTC eZ input keyboards, because i don't want them.
if i do cook them in however i get the symbols- it seems the symbols are a part of the HTC keyboards :\
i've been trying forever to find a way to get the symbols without the htc keyboards, can't seem to find answers

Can anyone tell me how to do this on the Sprint stock ROM? I've been trying to find the answer to this question as well, it "says" on the keyboard in yellow that SYM is the key to the left of the space bar but NO keyboard combination I've pressed invokes the symbols menu.
anyone help.

Can anyone tell me how to do this on the Sprint stock ROM? I've been trying to find the answer to this question as well, it "says" on the keyboard in yellow that SYM is the key to the left of the space bar but NO keyboard combination I've pressed invokes the symbols menu.
anyone help.

GustavTheLion said:
i didn't cook in HTC eZ input keyboards, because i don't want them.
if i do cook them in however i get the symbols- it seems the symbols are a part of the HTC keyboards :\
i've been trying forever to find a way to get the symbols without the htc keyboards, can't seem to find answers
Click to expand...
Click to collapse
I've once lost symbols keypad when I've changed registry entry
"HKLM\System\currentControlSet\Control\Layouts\e0010409\Ime File"
from "\windows\eT9ime.dll" to "\windows\compime.dll".
So you might try just to cook "eT9ime.dll" and verify that above entry
points this file, instead of cooking whole EzInput...

This worked for me : Edit the following registry key: HKLM\HARDWARE\DEVICEMAP\KEYBD\CWSLayout - change the value from 1 to 0 and softreset.

BladeStorm said:
This worked for me : Edit the following registry key: HKLM\HARDWARE\DEVICEMAP\KEYBD\CWSLayout - change the value from 1 to 0 and softreset.
Click to expand...
Click to collapse
yeah if you read earlier posts, the keyboard layout is not the problem

you only need to install the xt9 portion of the htc keyboards. the symbols menu is pulled from the xt9.

Just for the records
GustavTheLion said:
i have a at&t fuze and on my stock rom and many other pressing Fn+Space would bring up the symbol menu.
however i am running Da_Gs latest 6.5 and Fn+Space does nothing.
any help?
hopefully a cab or regedit rather than reflashing
Click to expand...
Click to collapse
Just for the records: had the same problem on a Fuze with RRE 5, fix it doing the opposite of what the_ozyrys did:
the_ozyrys said:
I've once lost symbols keypad when I've changed registry entry
"HKLM\System\currentControlSet\Control\Layouts\e0010409\Ime File"
from "\windows\eT9ime.dll" to "\windows\compime.dll".
Click to expand...
Click to collapse
I changed compime.dll to eT9ime.dll and fix it

QWERTY Keyboard Problem

When I press the Fn button and try to type an ; it creates this, "
When trying to type @ it creates an !
Is there a registry edit that can remap the keys?

Sounds like you have the wrong keyboard layout (perhaps running a regular Kaiser ROM on an AT&T tilt). Search for "tilt keyboard fix" and you should find a cab file to install and fix the mey mapping.

Alright I appreciate it, how about this one..
http://forum.xda-developers.com/showthread.php?t=334911

Worked like a charm!

Solution: AEKMap working with HD2 - Tested with Freedom Universal Keyboard 2 - QWERTZ

if you have problems with your hd2 in remapping hardware keys of your bluetooth or other hardware keyboard and the remapping with aekmap is not working like you want, maybe here is help for you!
i found a solution today that is working for me:
i modified a aekmap mapping-file for my german qwertz freedom universal keyboard 2, then i changed the hd2-sip (softwareinput/screenkeyboard) to anything else, but not the standard-finger-input-softkeyboard from htc, because it seems to cause that not working remapping problem!
a tip: you still can use a good sip-keyboard parallel in use of the bluetooth keyboard without having that problem. i use fingerkb instead. totally free and also available in many languages!
and don't forget to modify the aekmap file by yourself to work with your keyboard!
i will attach my keyboard config for the german qwertz freedom universal keyboard 2 (not version 1 - working in hid-mode) - tested on light modified german windows-mobile 6.5 rom but should be working on all other roms.
known problems for my freedom universal keyboard 2: this keys are not working and also not recognized by the aekmapscan.exe:
<>| = opens start-menu - i tried to map this keys but then i can not use the hd2 win-key, because it's writing a "<" when pressing, so i deactivated it!
alt gr is not working (no characters like @€{[]}\~ etc)
fn key is not working (maybe only with the escape-key)
start-key is not working, use the <>| key instead
i hope i could help someone in the future!
downloadlink for aekmap 1.3: http://ae.inc.ru/aekmaplicense.php