Related
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
Guys I have just modified the 2330..bla manila file following the guide in the Sticky. Everything is ok expect one thing, I did everything, added my city (Lugano, Switzerland). When i go to weather tab and i choose my city it says connection error, but every other city works great :S Can you please help me?
I'm having no luck either.
The instructions regarding SQLite don't work for me. Should point out you need to take off the Read Only flag else SQLite browser won't save your changes. The cities are added ok, and now selectable, but they do not update the weather. Keeps saying connection error (attempted many retries too), just for the custom ones. The default cities update fine.
hesian said:
I'm having no luck either.
The instructions regarding SQLite don't work for me. Should point out you need to take off the Read Only flag else SQLite browser won't save your changes. The cities are added ok, and now selectable, but they do not update the weather. Keeps saying connection error (attempted many retries too), just for the custom ones. The default cities update fine.
Click to expand...
Click to collapse
Same, and yes I took off the Read Only flag. I'm having your same problem. Please guys help us :S
After you have edited your manila file and set everything up, remember to install Weather Database editor 1.2 and then run the program. After that everything should be working A big big big thanks to "spud_work" who gave me this tip
fico2 said:
After you have edited your manila file and set everything up, remember to install Weather Database editor 1.2 and then run the program. After that everything should be working A big big big thanks to "spud_work" who gave me this tip
Click to expand...
Click to collapse
Hi,
Why dont you shearch before you open a new Thread !?
you can find about the weather connection etc. in many threads.
BTW there Allready is a DUTTY 3.7 Thread, so i think there is no reason to open a new thread !
Good night ( when you ask a question in the thread about the rom you use, You might get help allot faster )
hi all
i had the same problem with the weather using david uk rom the latest one.
This what i did and it worked for me
1. find HH_0409 weathercities_xml file in windows
its under HKEY_Current User\Software\Manilla.
2. Copy the file somewhere on desktop also make a backup of file incase need to replace it.
3. Open it with note pad and change a city which u are not likely to use, find the city code from Accu Weather website and replace all the code.
4. Save the file and copy it back to phone ( i put it in my documents folder) use total commander and replace the existing file.
5. Go in HTC Weather and add new location and file will be there for u to use. Worked for me so hopefully will work for u also.
Tried installing Weather Database but Touch Flo kept crashing tried loads of versions but same result so i tried this method and bingo it worked .
Hope this helps
Thanks
Eggie
Hi all, i just wanna share how i am doing it.
1. Edit 2330dc3c_manila in the sql lite to edit your city
2. Copy the 2330dc3c_manila to storage card
3. use total commander / resco explorer copy 2330dc3c_manila file to /windows (OVERWRITE IT)
(if you update now, u will receive connection error)
4. install the weather master 1.3
5. run weather master once.
6. turn off the touch flo 3d
7. copy 2330dc3c_manila to windows/ (Do This AGAIN)
8. delete forecast_cache at Application Data\HTC\databases
9. turn on your tf3d
10. you now can update your city.
this way work for me.. CMIIW
Rachmaan said:
Hi,
Why dont you shearch before you open a new Thread !?
you can find about the weather connection etc. in many threads.
BTW there Allready is a DUTTY 3.7 Thread, so i think there is no reason to open a new thread !
Good night ( when you ask a question in the thread about the rom you use, You might get help allot faster )
Click to expand...
Click to collapse
Sometimes a search returns so many results it's all but impossible to find the answer, unless you've been lucky with your chosen search terms.
If you've found the answer, a better way to educate people in the ways of searching might be to tell them what search terms you used. A link to the answer that you found by searching will also be useful.
This is a huge forum, with hundreds of threads and many thousands of posts, and tracking down the few posts that might help with an issue can sometimes be very difficult.
WeeJockMacFeegle said:
Sometimes a search returns so many results it's all but impossible to find the answer, unless you've been lucky with your chosen search terms.
If you've found the answer, a better way to educate people in the ways of searching might be to tell them what search terms you used. A link to the answer that you found by searching will also be useful.
This is a huge forum, with hundreds of threads and many thousands of posts, and tracking down the few posts that might help with an issue can sometimes be very difficult.
Click to expand...
Click to collapse
Please try and follow forum rules and don't open new threads unless absolutely necessary!!
I agree that it can be hard to find answers especially in long threads, but if search didn't help, why not ask this question within thread. There is already a discussion at present in Duttys V3.7 thread about this subject with possible solutions so NO need to open new thread
Thanx
how will i install this?
AndExplorer v1.0BETA3
got from here:
http://slideme.org/application/andexplorer
they told me astro is the best 1, but i dont have a wifi here now.
so i think this might work too?
coz i need to install some apps on my G1
ps. im kind of new on this.
tnx!
You'll piss people off starting new threads
You don't need wifi, you can just visit that URL in your phones browser and download from there over GPRS/3G
If for some reason you cannot use data at all from your phone, then you'll have to use the ADB method, read through this: http://forum.xda-developers.com/showthread.php?t=532719
i installed sdk and drivers through the setup file, but when i connect my phone and try to select a folder it doesnt allow selecting any of the folders within usb_drivers - "folder does not contain any device information"
i searched the forums and did bunch of fixes, including usbdeview, etc.
mt3g, C's 4.2.15.1
win xp, amd64, have a wooby partition with ubuntu which i uninstalled but partition still exists
can you help?
basically trying to get usb tethering to work, i assume it need the usb drivers installed properly
It'd be nice if you posted in the right section, maybe then people would help you. Tagged for move to Q&A
i think there is a tutorial on how to do this. im telling you this because i did this also.
you basically have to point to the correct driver when your phone is searching for one to be able to make it work. when you download the sdk from the google files, there is a page that will tell you how to set it up. i know its somewhere in there. sorry i know you need help but i just dont remember where i had seen it at. and i know cyanogen also has a tutorial on his page somewhere. i was comparing what he had and what google had on their page. but its there...
ok, i have a problem with the g sensor on the samsung captive. now, i've thoroughly searched online and on these forums for a fix, and i've found a few fixes. unfortunately, none of them worked.
before i get into that, here's my phone info:
SAMSUNG-SGH-I897
firmware 2.2
kernal 2.6.32.9
build Cognition 4.3
comp os win7 64bit (if it matters)
now, here is the first fix ive found:
http://androidforums.com/captivate-support-troubleshooting/162768-lost-auto-rotation.html
response #12
ive tried that using terminal emulator, but i get an error saying ADB not found. i downloaded the Android SDK with ADB, navigated to it using the command prompt and typed adb shell as instructed only to get an error saying device not found.
now, i completely abandoned that fix (since i felt i was doing something wrong and going nowhere) and found this one:
http://forum.xda-developers.com/showthread.php?t=712439&page=3
this one had better results, but up until sensorcalibutil_yamaha. like some users on that forum, my result was:
fgets: Unknown error: 0
msmachdep_SaveGsOffset failed
calibration utilities failed
so, after following that forum, i found the solution, which was to delete ms3c_yamaha.cfg from /data/system and rerun. i navigated to that folder on my computer, and nothing. there was no system folder in the data folder. i allowed hidden folders to be visible and still nothing. i downloaded a root explorer app, searched for ms3c_yamaha.cfg and nothing popped up. i couldnt even find the folder it was telling me to look in. and this is where i am stuck.
i cant find ms3c_yamaha.cfg, nor the folder to look into, and i dont know what else to do...
perhaps i'm using the wrong root explorer, or perhaps that folder isnt even on the ROM i used. completely flashing the ROM would be my last resort, since i'm not too savvy on stuff like that, and it took forever for me to figure out how to even put Cog4.3 on my phone, so hopefully someone out there has some info.
thanks for your time
edit:
problem solved!
when i woke up this morning, on my way to work i started thinking about my problem, basically, why couldnt i find the system folder. i searched again in the market for a root explorer and found one that specifically stated "even allows access to the elusive system data folders". i bought the app right away, and immediately i was given access and found ms3c_yamaha.cfg and proceeded with the second solution. after running the calibration, it gave me an odd result, which made my screen rotate when held vertically. i reran the test, and ran the system calibrate (the 3 circles with the blue ball) and all was set. phone works perfectly now.
thanks for anyone who read this, and who was taking the time to find a solution
Hello.
Can you tell me what application explorer you are using?
I got the same problem as yours.
Please reply to my email: [email protected].
Thanks a lot.