Related
About a year ago I flashed my fresh p4350 with (if I well remember) Aserg's rom. I was quite a noob and I don't remember if there was any warning about the IPL<4 warning. So I got a brick ever since.
I just turns on and gets stuck on the white HTC logo, the boot with the camera button pressed works and appears "USB" on the bottom while line.
I looked for some fixes on this forum but I didn't see anything helpful.
Do you now how/if I can unbrick it?
Somewhere to start
Send it to me Ill fix it and use it...nah, Im just kidding. Try looking up hard slp, or you can put your phone in bootloader mode and flash a stock rom. But with Hard slp ur flashing from the sd after...should help you. Another suggestion is to take the radio out of the rom your flashing. Look all of this up, it may help you.
Your problem could be solved: You have to 1st) do a hard reset
then flash with original flashfile, and its done
I don't remember what I did last time I tried but it worked perfectly, I just opened the original updater
HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe
when the phone was in the bootloader and it worked.
Well, now I need to change the language
I tried to HardSPL it now but it says that the image is corrupted, so I'm going to download it again and try again.
Thanks a lot!
.... unless anyone wants a P4350 in Spanish, pretty much new, unfortunately never used...
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
bayxsonic said:
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
Click to expand...
Click to collapse
Help........
I have the same problem, but I Danich......help me
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
ccmaniac said:
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
Click to expand...
Click to collapse
You probably have the wrong SPL installed. If you flashed a ROM using Olipof's HardSPL v1 and are using a WM6.1 ROM, you need to upgrade your SPL.
Flash cmonex's latest 3.* Hard SPL's from here: http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
ccmaniac said:
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
Click to expand...
Click to collapse
Instructions in Post #2 here: http://forum.xda-developers.com/showthread.php?t=396922
There are two sets BTW.
Ta
Dave
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
ccmaniac said:
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
Click to expand...
Click to collapse
If you are using a ROM based on a HTC Rom (which most cooked ones are) then 3.29. For ATT based ROMs then 3.56.
If you don't know, use 3.29, and if your not happy try 3.56
Dave
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
ccmaniac said:
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
Click to expand...
Click to collapse
Read the instructions I posted. I am not copying them out
Dave
3. insert the microSD in the kaiser, then reset kaiser. (I did soft reset???) But not start 4
4. it should say Loading / Update in progress then reboot to a screen saying SPL 1.00.OliNex.
5. it should now flash in the KAISIMG.NBH. and will reset.
6. at this point it should boot to the OS, if it doesn't, then flash an OS. (of course delete the previous KAISDIAG.NBH and KAISIMG.NBH from the sd card and remove sd unless you opt to flash the OS from sd too)
I did't do that with http://forum.xda-developers.com/showthread.php?t=420683
But I think I have made it with http://forum.xda-developers.com/showthread.php?t=396922.
Now I will flash Radio and Rom...
Thanks...
Using Dutty's Rom WM6.1 Hybrid v2 5.2.19716/5.2.19700 and works GREAT...
got the same problem, some one say i got a lot of progam runing and the os cant go well, i think i fix it setting X button to really close apps and dont go background
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
Hello,
I know you guys got some excellent walkthroughs, roms, programs and threads where you've helped a lot of people out but I could really use some personal feedback. I had hoped to fix my phone using one of the excisting threads but unfortunalty I can't get it to work with those.
My problem is one I've seen more of in here, I used the SE updater and it froze at 53%, I did what the program said, reconnected and it froze again at 12%, and again, again, etc. So I disconnected thinking it might be a bad USB port. But then the updater didn't recognise my phone at all. So I used the mtty program suggested in some of the threads and I got past the red/green/blue screen but now it's stuck at the Sony Ericson logo, as if WM6.1 is gone.
This is what the red/green/blue screen currently states:
KOV110
SPL-0.78.0000
MicroP1-787
MicroP2-707
From what I gather this means I can't flash roms, right? I tried making it a hard-spl but when I use the tool it says it can't connect.
So is there anyway to get a rom on it and bring it back to life?
Thanks inadvance!
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
meska said:
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
Click to expand...
Click to collapse
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Ronnet said:
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Click to expand...
Click to collapse
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
original roms will still work with original spl... but nevermind =P
laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
My phone can still power on in the sense that it shows the Sony Ericson logo or that I can access the three collor screen. But it won't launch WM6.1. I also have a problem with updating to hard DSL. It does recognise my phone because without it connected the program finds nothing and with the phone connected it wants to start updating. It says ''updating from image version: (emply) to image version: 1.00.X1 Ipress next and it opens a progress bar on both my X1 and the PC. But it never goes beyond 0% and then gives me an connection error. I think it has something to do with not being able to get passed the Sony Ericson logo. I mean the hard-DSL program does recognise my mobile but activeSync is never active because my PC doesn't recognise a WinMobile phone (since it wont go past the Sony Ericson screen)
meska said:
original roms will still work with original spl... but nevermind =P
Click to expand...
Click to collapse
Really? That might fix my device then. Could you suggest a rom from the long list? Perhaps one that works on all versions? Because I'm dutch but my mobile has always been in english so I'm not sure what rom version I had. Except that it was identified as an R2 Rom by the Sony updater before it killed my X1...
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
I'm now downloading the initial dutch R1 firmwire, could that one work?
Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
Alright so I got an R1 original rom (I now realize that the R3's were originals aswell) and it worked! I'm not sure if it was the different rom or the formatting with FAT32 that did but it works again. So I'd like to thank everyone who was kind enough to reply.
The device is incredibly slow now but now I can use the hard-DSL installer, right? DOes anyone have a suggestion for a good rom to use?
laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
DON'T hard-spl if you're going to flash a stock ROM. And especially if you're going to use SEUS.
Try flashing the R3A first. The R1s are way slow, as you've seen.
well i was making a rom and so i completed it. So i flashed it to my hima and it didn't work so, i flashed one of my working ones to it and it stays stuck on the first boot screen before the backlight comes on.
Anyone know whats happening here?
Thanks
flyboyovyick said:
well i was making a rom and so i completed it. So i flashed it to my hima and it didn't work so, i flashed one of my working ones to it and it stays stuck on the first boot screen before the backlight comes on.
Anyone know whats happening here?
Thanks
Click to expand...
Click to collapse
Should I really delete it?
You failed, what did you do?
hay i also got such a problom when i can't find the solution for always connected with active sync guide.
so just read it and follow the steps and flashe any good ROM and then hard reset it by below steps
1. Hold Camera and Record button and press reset. Hold it a while, until you'll see three options at the top. Choose:
* Enable KITL: No
* Clean Registry Hive: Yes
* Format Storage: Yes
& leave it you got your working screen again if device is not broken
best regards
KAASHP said:
hay i also got such a problom when i can't find the solution for always connected with active sync guide.
so just read it and follow the steps and flashe any good ROM and then hard reset it by below steps
1. Hold Camera and Record button and press reset. Hold it a while, until you'll see three options at the top. Choose:
* Enable KITL: No
* Clean Registry Hive: Yes
* Format Storage: Yes
& leave it you got your working screen again if device is not broken
best regards
Click to expand...
Click to collapse
No boot - rom failure.
Try using new tools instead
i fixed it. i just flashed one of your roms to it. lol
flyboyovyick said:
i fixed it. i just flashed one of your roms to it. lol
Click to expand...
Click to collapse
Well, in my opinion: Do not delete this thread.
It's a good beginning to discuss common problems on upgrading, or installing apps after that! What do you think of that? Telling others about problems and their solutions or workaround.
----------------
Now playing: Herbert Grönemeier - Musik nur wenn sie laut ist
via FoxyTunes
muckelmaus said:
Well, in my opinion: Do not delete this thread.
It's a good beginning to discuss common problems on upgrading, or installing apps after that! What do you think of that? Telling others about problems and their solutions or workaround.
----------------
Now playing: Herbert Grönemeier - Musik nur wenn sie laut ist
via FoxyTunes
Click to expand...
Click to collapse
good idea!
So luby have you been working on the 2minutes to flash a rom thing?
Or no progress?
flyboyovyick said:
So luby have you been working on the 2minutes to flash a rom thing?
Or no progress?
Click to expand...
Click to collapse
I've been working but now it is holiday, I have no special time to cook and create tools, I barely find time to write on forums. But last one is a must.
None of the kitchen for Himalaya can not gather a working firmware --- after flashing and hard reset - white screen.With Microsoft Device Emulator v3.0 everything works fine.Help us to reach a working Russian ROM.All files i give:
http://gettyfile.com.ua/570432/
aeroflyluby said:
No boot - rom failure.
Try using new tools instead
Click to expand...
Click to collapse
yeah you are right but by using good ROM you can flash it again and get working device Isn't it ??
KAASHP said:
yeah you are right but by using good ROM you can flash it again and get working device Isn't it ??
Click to expand...
Click to collapse
Yes, but if you cook it doesn't make any sense.
right i have cooked another rom, today that has the programs in DEVICE folder.
And i will try it tomorrow
flyboyovyick said:
right i have cooked another rom, today that has the programs in DEVICE folder.
And i will try it tomorrow
Click to expand...
Click to collapse
After about a month of mind collaption, of nirvana entries, of psychodelic traffic over my neurons (I believe them are transistors), I'm flashing new my rom.
God help the boot.
aeroflyluby said:
After about a month of mind collaption, of nirvana entries, of psychodelic traffic over my neurons (I believe them are transistors), I'm flashing new my rom.
God help the boot.
Click to expand...
Click to collapse
Still cannot get the rom to work! maybe its too big?
flyboyovyick said:
Still cannot get the rom to work! maybe its too big?
Click to expand...
Click to collapse
How many free sectors do you have?
aeroflyluby said:
How many free sectors do you have?
Click to expand...
Click to collapse
How do i find that out?
flyboyovyick said:
How do i find that out?
Click to expand...
Click to collapse
when you'r at the last step, you'll get a notice about free/used sectors..the rom MUST HAVE 0001 Bytes to work, if its not then ROM is overloaded..also the ROM stucking at bootscreen can be a wrong XIP port or initflashfiles.dat error
o btw guys...
/me takes out his dusty but still working good hima and charges it
/me starts up his kitchen
/me cooks ROM
/me starts testing and uploading soon
im sorry i was away..but i havent had much time for cooking...univerity exams and wokring to support myself =/
hopefully i'm back for good now..
Well today i come a cross a c skekhar folder with a rom in it and a ExtROM folder:
then i read this in a .txt in that folder and it says:
Code:
1. You must be seeing a folder \ExtROM here which has few cabs and tsk files. Place this folder on \Storage Card of your device.
2. You can add the files which you wish to autoinstall after hard reset to this folder. But, dont forget to modify the \Storage Card\ExtROM\Config.txt accordingly.
3. Mark all cab files as read only.
You now have the Extended ROM back on your device but on the storage card this time.... Enjoy.
C_shekhar
So iam going to do a bit of messing about and try and get this to work and stuff.
Just thought i would let you know!!
flyboyovyick said:
Well today i come a cross a c skekhar folder with a rom in it and a ExtROM folder:
then i read this in a .txt in that folder and it says:
Code:
1. You must be seeing a folder \ExtROM here which has few cabs and tsk files. Place this folder on \Storage Card of your device.
2. You can add the files which you wish to autoinstall after hard reset to this folder. But, dont forget to modify the \Storage Card\ExtROM\Config.txt accordingly.
3. Mark all cab files as read only.
You now have the Extended ROM back on your device but on the storage card this time.... Enjoy.
C_shekhar
So iam going to do a bit of messing about and try and get this to work and stuff.
Just thought i would let you know!!
Click to expand...
Click to collapse
It does not make any sense, because I didn't manage to unlock extrom in 6.5 to perform normal reading (i will try tomorrow). I also cook 6.1 too.
Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
can some1 please help on this?
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?
IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?
prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
so how do i marked this thread as solved????
OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.
IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......