i ordered an htc fuze used off of ebay. i got it today and realized that the theme/layout was different from what was in the manuals. It is vertical, not horizontal like the pictures. i got on the internet and looked around and couldnt find anything that i hadnt already tried. i dont know if it is because the operating software is windows 6.5 or something else.
any help is appreciated
spaceghost379 said:
i ordered an htc fuze used off of ebay. i got it today and realized that the theme/layout was different from what was in the manuals. It is vertical, not horizontal like the pictures. i got on the internet and looked around and couldnt find anything that i hadnt already tried. i dont know if it is because the operating software is windows 6.5 or something else.
any help is appreciated
Click to expand...
Click to collapse
How about throwing out some screenshots so we can see what you're talking about. There is SPB screenshot or my mobile at www.mymobiler.com
Your phone might be in landscape mode. Go to start --> settings --> screen.
Change the setting to portrait
http://img175.imageshack.us/i/screen01v.png/
http://img692.imageshack.us/i/screen02.png/
ive checked all in settings and couldnt find anything
spaceghost379 said:
http://img175.imageshack.us/i/screen01v.png/
http://img692.imageshack.us/i/screen02.png/
ive checked all in settings and couldnt find anything
Click to expand...
Click to collapse
What you have is WM 6.5 titanium plugin. Go to start --> settings --> items and look for Touchflo 3D. Put a check there and you should get what you want. If you dont have Touchflo 3D in the selection then search for a manilla cab on the forum or flash a new ROM.
You can also downgrade to standard WM 6.1 stock ROM.
i looked under settings and there is no items tab. i think im just going to flash a new ROM but im new to windows mobile so could you help me out with how to do that?
spaceghost379 said:
i looked under settings and there is no items tab. i think im just going to flash a new ROM but im new to windows mobile so could you help me out with how to do that?
Click to expand...
Click to collapse
Is this what you're looking for?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If so, look at my post and download the cab file: http://forum.xda-developers.com/showthread.php?t=576329
Use the Cab posted by silentP. If you want to flast the new OS then make sure you fully read up the flashing guide
so i tried both of what you two said.
when i tried just downloading the cab and it wont download as a normal cab. so i tried downloading another tf3d2 theme and it downloaded right but it still isnt doing what i want. so i thought it was the ROM
then i moved on to the new ROM.
when i tried to download the .NET framework it would say download complete. then setup error. im not sure why it is messing up but it seems like an important step.
is there something im doing wrong?
spaceghost379 said:
so i tried both of what you two said.
when i tried just downloading the cab and it wont download as a normal cab. so i tried downloading another tf3d2 theme and it downloaded right but it still isnt doing what i want. so i thought it was the ROM
then i moved on to the new ROM.
when i tried to download the .NET framework it would say download complete. then setup error. im not sure why it is messing up but it seems like an important step.
is there something im doing wrong?
Click to expand...
Click to collapse
The cab file is also zipped with 7zip to compress the size. You will need either winrar or 7zip to unzip then copy it to your phone to install.
i installed the new theme and it is still doing the same thing. i think im going to have to flash a new rom
spaceghost379 said:
i installed the new theme and it is still doing the same thing. i think im going to have to flash a new rom
Click to expand...
Click to collapse
Do you know which ROM you have on there now? I have a problem with my g-sensor on my fuze. It got wet and I completely disassembled it and got everything working except that part so I have to take it apart again. If it were me, I'd try to flash the stock Fuze ROM from AT&T (assuming that's your carrier) and see if it's fixed. Here is the link to the thread: http://forum.xda-developers.com/showthread.php?t=519698
Again, it's just a recommendation, but it's where I'd start.
Related
Touch Flo Professional Rom v4.12.07.09
For HTC Herald
- CE OS 5.2.1238 Build 17745.0.2.3 Original ROM(Not new but verry stable)
- Change icon system black Touch style
- Update ArcsoftMMS_4_2_8_1
- SIM Manager 6.25
- New keyboard Touch Style
- HTC_X-Button_1_51_30470_2
- And ect ect..
PP size : 6mb
Screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom have 2 part :
Part 1 :
http://download187.mediafire.com/1imv1h0jgdtg/2iy5g2bmgco/HERALD_WM6.0_4.17.07.09.PV.part1.rar
part 2:
http://pdaviet.net/attachment.php?attachmentid=45728&d=1187220016
mirror part2:
http://uploaded.to/?id=i0cr3c
Info and version Rom update :
http://pdaviet.net/showthread.php?t=12072
Cheers..!
Nice one, but i really dont like the style of the HTC Home clock
I agree, i like your roms, because to work very well, but i really don't like al the visual crap you've added. I like one with the official rom like this, then the ORGINAL htc kaiser home screen, ORGINAL dialer pad etc, and a reduced poolsize, fix for keeping cab files after installation (like in all your roms). Can you make something like this?
PLease upload the second part to a other website, like box or also mediafire.
We are unable to read russian here on these forums.
iTeQ said:
PLease upload the second part to a other website, like box or also mediafire.
We are unable to read russian here on these forums.
Click to expand...
Click to collapse
Links onderin kan je de taal veranderen van Rusisch naar Engels, je kan je gewoon registreren (zonder activatiemail) en downloaden!
iTeQ said:
PLease upload the second part to a other website, like box or also mediafire.
We are unable to read russian here on these forums.
Click to expand...
Click to collapse
This is not Russian language ... if it was Russian this would probably be called PDARUSS
OK anyways here is mirror of part2.
Is it possible to install it even if the mobile isn't CID Unlock ?
Thanks for answer
djhook said:
Is it possible to install it even if the mobile isn't CID Unlock ?
Thanks for answer
Click to expand...
Click to collapse
Yes.Update by ASerg tool..!
Does this new version fix the issue in the xxxx.08 version where hitting the touchflo didn't bring it up until you spun the cube?
...or the "X button hits the right softkey instead" issue?
Password for rar file?
Is it just me or did someone else receive a promt for password when unpacking HERALD_WM6.0_4.17.07.09.PV.part1.rar ?
Password=?
I see Network Wizard bug was not fixed in this release. Let me quote myself
kogen said:
Your TouchFLO button went back to Calendar due to Network Wizard usage.
This should already be fixed in the registry BTW to:
Code:
\HKCU\Software\HTC\NetworkWizard
DefSoftKeyName = "TouchFLO"
DefSoftKeyOpen = "\Windows\APLauncher.exe"
To go back from Calendar to TouchFLO make sure you have those values in registry:
Code:
\HKCU\Software\Microsoft\Today\Keys\112
Default = TouchFLO
Open = "\Windows\APLauncher.exe"
And you are all set
Click to expand...
Click to collapse
tom_codon said:
Yes.Update by ASerg tool..!
Click to expand...
Click to collapse
ok thanks. but in case of bricking, can I use the WM6 update to unbrick my device ?
Yes you can.
ok I'll try this cooked rom
I tried this ROM out, X-button issue appears to be fixed now. The only problem I'm having (still) is that on the 6 button HTC Homeplug, the weather never downloads correctly. I can install a different version over this one and then it downloads fine, but I lose all of the skinning that's been done to it which I sort of like. Anyone have a way to fix this, may have been discussed before.
Babberingen said:
Is it just me or did someone else receive a promt for password when unpacking HERALD_WM6.0_4.17.07.09.PV.part1.rar ?
Password=?
Click to expand...
Click to collapse
It's: PDAVIET
All caps.
giving it a whirl right now...
something wrong with it (part 1), when i download it in Opera, it dl about 1KB and say it finish (it is corrupted) but in Firefox it downloads normaly .. other version i all dl in Opera and works wel. .. something wrong with it..
Hello i have a problem with this rom it wil not boot up, all the others rom's work fine but the v4.12.07.09 after update via ASerg Policies stays on the with screen. I have the wm5 allready installed, that works fine. and ill puth back the v4.12.07.08 see if that will work. did any one have the same problem ???
don't flash from PDAVIET installation
mvwood said:
Hello i have a problem with this rom it wil not boot up, all the others rom's work fine but the v4.12.07.09 after update via ASerg Policies stays on the with screen. I have the wm5 allready installed, that works fine. and ill puth back the v4.12.07.08 see if that will work. did any one have the same problem ???
Click to expand...
Click to collapse
I don't know if I understood correctly but updates from a previous installed PDAVIET Rom usaly aborts with an errormessage while flashing. This errormessage is often overlooked and so people start their Heralds with half-flashed roms. This can't go right.
Personaly, I recommend to install an official WM5 or the newly released offical WM6 RUU PRIOR to installation. Then you can update to PDAVIETs version normaly.
New build OS for HTC Herald:
CE OS 5.2.1908 Build 18508.0.7.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here:
http://www.pdaviet.net/showthread.php?t=13325
I noticed this over on PDAViet this morning. Can you update the changes besides the OS version?
PhamQuang said:
New build OS for HTC Herald:
CE OS 5.2.1908 Build 18508.0.7.0
here:
http://www.pdaviet.net/showthread.php?t=13325
Click to expand...
Click to collapse
Hi,
I just installed this new version, it runs great, but I was unable to get Biotouch to change my video player. It's currently set to \Windows\ping.exe instead of \Windows\wmplayer.exe. I made all changes as with all previous version but this one does not change the path even after a soft reset.
Going back to version .12.
I'm just wondering if any body else had this problem.
Thanks for your feed back.
1st file gives me service unavailable atm. Anyone care to reup who has d/l already.
EDIT:nvm, silly me forgot how to perfrom a right click
Hey. I'm lookin' at trying this later. Has the auto method for the touchflo been incorporated into this yet? That's the only thing holdin' me back from updating to .12. I know it's not in that Rom either, just too lazy to set everything back up again. lol
...So yeah, just installed the rom, and it seems to run fine. Just one thing. . . anybody else having problems syncing to a corporate exchange server? I can't seem to get my work email to sync up.
Could someone please upload part2 as attachment please?
thnx
i wish we didn't have to zip attachments, would make it easier to allow uploads of rar files...
The Dutchman said:
Could someone please upload part2 as attachment please?
thnx
Click to expand...
Click to collapse
And here's part 2!
EDIT: Oh damn... I'm sleeping again!
what changes this rom? some description? (sry for speling, im 16 years old)
ttran001 said:
Hi,
I just installed this new version, it runs great, but I was unable to get Biotouch to change my video player. It's currently set to \Windows\ping.exe instead of \Windows\wmplayer.exe. I made all changes as with all previous version but this one does not change the path even after a soft reset.
Going back to version .12.
Click to expand...
Click to collapse
Did anybody have this problem?
Or am I the only one?
Thanks,
Did you hit the little button next to the path? Because I was able to change mine.
Mi|enko said:
Did you hit the little button next to the path? Because I was able to change mine.
Click to expand...
Click to collapse
That's strange, I have always changed the path by spelling it out.
I will reload the rom and try it again.
can anybody confirm if active sync works with this os on the wing because previous versions coruupted active sync
Smilez_c said:
can anybody confirm if active sync works with this os on the wing because previous versions coruupted active sync
Click to expand...
Click to collapse
I will let you know in about 15 mins, I'm reloading my wing rite now.
active sync
Smilez_c said:
can anybody confirm if active sync works with this os on the wing because previous versions coruupted active sync
Click to expand...
Click to collapse
I'm using an actual t-mobile wing and active sync works fine, at the same time I've tried all versions of pdaviet starting at .10 and up and along with touch it 1.0 and 1.1 , oem with touchflo added and never a prob with active sync.
Smilez_c said:
can anybody confirm if active sync works with this os on the wing because previous versions coruupted active sync
Click to expand...
Click to collapse
Hi,
Just finished the rom upgrade and yes the sync works fine.
mmm thats wierd only 1.1 works fine for me but pdaviet corrupts active sync u get error message
Does my wing have to be unlocked before i can flash the rom?
Mi|enko said:
Did you hit the little button next to the path? Because I was able to change mine.
Click to expand...
Click to collapse
Hi,
I got the same thing, when i click on the Video button it opens both wmplayer and ping.exe.
Lesson learned here, going back to .12 until some one fixes this issue.
I'm kinda new to this
from the How To upgrade file am i suppose to follow the instrictions 3 of them:
The order of installation OS:
The order of installation ExtRom:
Extraction current ExtRom:
Do i do all 3 in order ?
Also what mode do i need to be in ?
I'm running Shipped T-Mobile Wing right now.
i am only posting it here
2 versions
non fuze and fuze
found here http://www.mediafire.com/?sharekey=d70bc95672875df0d2db6fb9a8902bda
UPDATE: install official flash lite cause this one supports flash
UPDATE: it also has the slide zoom on the bottom of the screen
Pictures by bugsykoosh
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTALL ISSUES LOOK HERE
norkoastal said:
Tried to install but no luck.. Cleaned-up the stock ROM's opera and loaded this version, but it keeps giving me the unsuccessful install message.
Click to expand...
Click to collapse
open opera
open help
click about opera
does it say
version:9.5
Build: 15613
if it does you are done
if not close opera with a task manager and try again
if that doesn't work soft reset
appreciate it you much as always herg. how's the flash sites running? most builds ive come across dont do to well
kwill said:
appreciate it you much as always herg. how's the flash sites running? most builds ive come across dont do to well
Click to expand...
Click to collapse
still testing since i had to put this back together from duttys rom
Tried to install but no luck.. Cleaned-up the stock ROM's opera and loaded this version, but it keeps giving me the unsuccessful install message.
it is working on mine - stock Fuze ROM. Photos attached
You got to love those false messages.. works great.. Thanks
Thanks Herg.....I usally don't use opera because it's slow.....But this one. It's different. Its actually fast and responsive.
Hey herg do you have the jbed that came with dutty's rom. Could you post it so I could update my opera mini.PLEASE
YOU ARE THE MAN!!!!
Thank you much. This version of Opera blows away the other versions and is lightning fast!
This may be the dumbest question I've asked on this forum ever but uhh, why is there a fuze vers. and a non-fuze vers.?
fb401 said:
This may be the dumbest question I've asked on this forum ever but uhh, why is there a fuze vers. and a non-fuze vers.?
Click to expand...
Click to collapse
fuze version has the set up for medianet
non fuze doesnt
boxer112 said:
Thanks Herg.....I usally don't use opera because it's slow.....But this one. It's different. Its actually fast and responsive.
Hey herg do you have the jbed that came with dutty's rom. Could you post it so I could update my opera mini.PLEASE
YOU ARE THE MAN!!!!
Click to expand...
Click to collapse
i will post that but i ask to give me time cause i have to piece everything back together like a million pieece jigsaw puzzle.
Flash
Does anyone have flash working on this? If so link to which one you installed please! I loaded the new official one that came out last 5-7 days and it isn't working for me, thanks!
This is a newer build but build 15529 seems to perform a lot better for me.
dahlem said:
Does anyone have flash working on this? If so link to which one you installed please! I loaded the new official one that came out last 5-7 days and it isn't working for me, thanks!
Click to expand...
Click to collapse
go to
http://forum.ppcgeeks.com/showthread.php?t=51483
download juggalo X official flash lite. Mine is working with it.
is this the same as the new beta preview on the opera site: Opera 9.51b2, equipped for use with Google Gears?
You can download that version here.
I've tried installing this several times, including the steps in post 7 but it's still not working for me. I get the following message:
Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
Click to expand...
Click to collapse
Is this a problem because I'm running a cooked ROM with Opera 9.5 build 15202 built into it?
herg62123 said:
fuze version has the set up for medianet
non fuze doesnt
Click to expand...
Click to collapse
Makes perfect sense. Thanks.
diar said:
is this the same as the new beta preview on the opera site: Opera 9.51b2, equipped for use with Google Gears?
You can download that version here.
Click to expand...
Click to collapse
the new beta iss build 15894
it dooesn't include flash support
and it is very choppy
awesome work man
awww man i cant download from my htc tp through media fire
is someone could upload opera/flash lite to another site that would be great
Thanks to mbarvian because I used his skin as a base, and to poorlyduck for the clock, I made 2 manilla 2d themes, one is based off of the rhodium's touchflo 3d, and one based off of the topaz's.
The zip files have the images for the theme in them, you have to use the Manilla 2D customizer to apply the themes, which can be downloaded from:
http://forum.xda-developers.com/showthread.php?t=427392
also, I am not sure if everyone will have this problem but if the clock doesn't show up correctly I recommend installing poorlyduck's clock because that will fix it, I will try to make my own fix later, but for now poorlyduck's should fix the problem, you can find it here:
http://forum.xda-developers.com/showpost.php?p=2756661&postcount=2667
other than that, please leave feedback, report any bugs that you find (although I tested it and am currently using the topaz one) and enjoy!
Of coarse as usual I am just going to say I am not responsible for any damages hardware or software related ext, but I am pretty sure applying a theme can not do anything like that
BTW- I would prefer a touch pro 2 over a diamond 2, but I am using the topaz theme cause I think it looks better
Rhodium Theme:
http://dl.getdropbox.com/u/1276902/RhodiumM2D.zip
Topaz Theme:
http://dl.getdropbox.com/u/1276902/TopazM2D.zip
I love your top bar icons!!
Can you share it with us?
lkachun9129 said:
I love your top bar icons!!
Can you share it with us?
Click to expand...
Click to collapse
if you are talking about the taskbar, I got those by flashing Josh's manilla 2d test rom , the newest one, and I will try to post the themes but whenver I try uploading them I get an error
upload in zip, rar is not supported
sergiorus said:
upload in zip, rar is not supported
Click to expand...
Click to collapse
it is a zip
Link278 said:
if you are talking about the taskbar, I got those by flashing Josh's manilla 2d test rom , the newest one, and I will try to post the themes but whenver I try uploading them I get an error
Click to expand...
Click to collapse
thx a lot~~~~~
Will we see any attachments, links, mirrors, etc. to this or is it just a tease?
tnyynt said:
Will we see any attachments, links, mirrors, etc. to this or is it just a tease?
Click to expand...
Click to collapse
its not, when I try to upload the files to xda it gives me an error and I don't have an account on any file sharing site
Link278 said:
its not, when I try to upload the files to xda it gives me an error and I don't have an account on any file sharing site
Click to expand...
Click to collapse
Check your PM. What type or error? Make sure the files are .zip or .cab format.
FYI
Remember using M2D Customizer to add custom texts (HTC) and eliminate carrier name, so the Date gets sent to the bottom like the original Topaz/Rhodium.
Paul
The clock isn't working right for me
It gets put into the bottom right corner, like the XML for the digital clock isn't being changed to the middle of the screen, but is staying in the right for the original MD2 theme.
Paul_Days said:
Remember using M2D Customizer to add custom texts (HTC) and eliminate carrier name, so the Date gets sent to the bottom like the original Topaz/Rhodium.
Paul
Click to expand...
Click to collapse
Oh I didn't even notice that, I am nor exactly sure how to do that, maybe in a future release after I learn more
derekwilkinson said:
The clock isn't working right for me
It gets put into the bottom right corner, like the XML for the digital clock isn't being changed to the middle of the screen, but is staying in the right for the original MD2 theme.
Click to expand...
Click to collapse
install this:
http://forum.xda-developers.com/showpost.php?p=2756661&postcount=2667
that should fix it
Link278 said:
Rhodium Theme:
http://ejpwaa.bay.livefilestore.com...qGZgq2xfAHB0y9HLAH-yQ/RhodiumM2D.zip?download
Topaz Theme:
http://ejpwaa.bay.livefilestore.com...WYmQPq8q9QkpG7i2wC-uumw/TopazM2D.zip?download
Click to expand...
Click to collapse
Oops! This link appears to be broken.
strucon said:
Oops! This link appears to be broken.
Click to expand...
Click to collapse
They are fixed now, in fact they were fixed several days ago
How can I solve this problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oh, I found your solution at above.... thx
Is there an easy way to change the initial windows logo screen to like the original "Smart Mobility" logo how about the windows 6.5 screen is that still named "welcomehead.96.png" also is the a beta rom or the original release?
It's for QVGA, isnt it? So WQVGA device can use it with full screen
The links doesn't work for me. All I get is a 0 kb zip file.
Would you please fix it? Well of course I know a long time has past since the last post.
Hi!
I want to present you my new build for our himalaya!
It is 23563
NET CF 3.5 BUILT IN!
You will not have any problems with any application!
It was built with new aerokitchen so it should really work well )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ah, link!
CLICK HERE
Enjoy
wooow amazing, big thanks aeroflyluby.
try this now.
Very good ROM But i think i have found a bug:
I can't access any websites in IE, i can connect to GPRS but no "connection". The ActiveSync logo is still visible after disconnecting from the cradle, but with an X under the 2 arrows, is this why the GPRS don't work properly?
Also, a little noob-question? What does the different RAMDISK-sizes mean?
I used this ROM for 2 days
it" good rom
thankyou aero
start testing in ukraine...
why can I receive file from another phone/device by bluethoth
arifurrokhman said:
why can I receive file from another phone/device by bluethoth
Click to expand...
Click to collapse
It's not a bug, it is feature!
LOOLL
aeroflyluby said:
It's not a bug, it is feature!
LOOLL
Click to expand...
Click to collapse
It took you hours to build it in - and then, it is detected as a bug. Funny!
thanks aeroflyluby this looks like another triumpth for the still going strong himalaya.
keep up the good work!!!
Nice ROM with .Net CF 3.5 included
Using 16 MB RAMdisk version
Sascha
hello aeroflyluby,
- i can't received MMS (install ArcSoft 5.2.8.5)
- Internet Explorer not work (GPRS ON)
thanks...
wowwwwwwwwwww
sorry for the noob inquiry. i've had a himalaya for under a week and its my first time to upgrade from windows 2003 to this rom. it doesn't have a letter recognizer in messaging. tried searching but i can't seem to find the cab. i tried downloading and installing fingerkeyboard v2 for vga but it messed up the screen alignment on my pda. i had to switch to ather 6.1 to fix the problem. how do i get and install letter recognizer or a big touch keyboard or keypad to this rom?
thanks.
atomlifer said:
sorry for the noob inquiry. i've had a himalaya for under a week and its my first time to upgrade from windows 2003 to this rom. it doesn't have a letter recognizer in messaging. tried searching but i can't seem to find the cab. i tried downloading and installing fingerkeyboard v2 for vga but it messed up the screen alignment on my pda. i had to switch to ather 6.1 to fix the problem. how do i get and install letter recognizer or a big touch keyboard or keypad to this rom?
thanks.
Click to expand...
Click to collapse
I think it is deleted from 6.5.x builds. 6.5 21884 have it.
I think it is not needed because you could type faster on keyboard.
You can install ezInput as default input method, it works well here.
If you can't find correct version I could upload one which works.
Post your results
I don't get it I tried to install this rom and it always hangs on the startup screen. what I'm I doing wrong?
I think it is deleted from 6.5.x builds. 6.5 21884 have it.
I think it is not needed because you could type faster on keyboard.
You can install ezInput as default input method, it works well here.
If you can't find correct version I could upload one which works.
Post your results
________________
Click to expand...
Click to collapse
thanks for the suggestion. i downloaded ezinput 1.5 no keyboard vga cab together with its language pack. the cab won't install because of untrusted certificate. i installed sdk certs but the ezinput cab still won't install. hoping for other suggestions. thanks.
rrb008 said:
I don't get it I tried to install this rom and it always hangs on the startup screen. what I'm I doing wrong?
Click to expand...
Click to collapse
Do you have XDA II or XDA IIi?
atomlifer said:
thanks for the suggestion. i downloaded ezinput 1.5 no keyboard vga cab together with its language pack. the cab won't install because of untrusted certificate. i installed sdk certs but the ezinput cab still won't install. hoping for other suggestions. thanks.
Click to expand...
Click to collapse
CAb in attachment
The one I have is a Qtek 2020, and I managed to install several other roms in it.
This one I tried and it won't go past the qtek splash screen.
I put it in bootloader and the update was successful, when I reset it, nothing...
rrb008 said:
The one I have is a Qtek 2020, and I managed to install several other roms in it.
This one I tried and it won't go past the qtek splash screen.
I put it in bootloader and the update was successful, when I reset it, nothing...
Click to expand...
Click to collapse
When you get into bootloader, there should be an info about version, could you tell me?
I really think you have wrong phone.
Also you can take a photo of your device and send it here, just suggestion
Bootloader version is 1.03
I can't post outside links, but here is a pic:
h**p://picasaweb.google.com/lh/photo/c0vc6FaQxEqpM7MauFQneQW46g_f-iZl2VgddFUL1sg?feat=directlink