Related
Here's a few cabs I altered for the Herald P4350, they should all install straight onto the WM6 WWE RUU Rom and work.
PS. I included 10 Button CommManager aswell, & make sure you soft reset after install.
I like the Touch Dialer. One question: is there a way to see the names ánd the corresponding numbers in the selectionbox?
good work
thanks for the dialer cab for my wing . damn I love this place its like disney world only without walts body in a cryogenic chamber
could you please post screen shots
Screens would be great! Also, does "smart-dial" still work with these cabs?
thanks for your work!
Would installing one of these affect MyFaves call logging?
http://forum.xda-developers.com/showthread.php?t=330337
NotShorty said:
Screens would be great! Also, does "smart-dial" still work with these cabs?
thanks for your work!
Click to expand...
Click to collapse
yes some screen shots would be great
When I try to use the Comm Manager cab, it says I don't have sufficient privledges to install it. What do I need to do?
Thanks for posting those cabs.. exactly what I was looking for when I didn't like the dialer that was already baked into my cooked rom. Hrmm, that sounded kind of weird... oh well.
Guyz please post out the S/W U want in ur Himalaya's(toflock wm6 rom)..and the software u dnt want
here we go again... guys do you really think the new rom is full of junk?... its a clean version for god sake...
Hey....I just asked..
ather90 said:
and the software u dnt want
Click to expand...
Click to collapse
As for me the only two things you could remove are Office and VoIP, but it depends on what you're using your PDA for. As for me it's a phone and mobile office.
If you want to cook your own ROM, just cook it. I said some time ago that I'll release my own, too, but only when I get it really full working. Besides... if you want to, you could wait a bit more, I'm preparing a kitchen with Anichillus.
OK... back to Platform Builder
Gud luck preparin the kitchen...Yeah probably..will chk the dump at nite
Hi,
Add: Shutdown soft, PIM Backup soft, Speakerphone, IM+ or Agile messenger, some *.tsk and rings
Remove: VoIP, Messenger, Windows Live.
but that would make it a less clean version
it would just make it a version which had the software you
like included
Yeah Rudegear is rite..I checked out the dump..Only Ms word.ppt,exel,onenote and more can be removed.
How about creating a list of possible in/excludes with some additional info per item what it would eat in ROM space, if it eats RAM, clock ticks, battery life, clutters registry and so on. Then we can all just vote:
1 in, 2 out, 3 in, 4 in and so on. If lots of us would vote you could just add up the average wish list and bake the most popular ROM ever.
I believe I'd love to see a ROM with Word, Excell, PPT left out. The 3D Cube flash Touchflo clone looks like an appealing replacement for that space, but only if it's stable, doesn't drain my battery and doesn't slow my Hima down.
I agree that that would make it far from a clean ROM, but for me a "clean" ROM is one that doesn't come full of stuff I never use. IMHO you can also throw out the standard games, sample pictures and such crap. But tiny tools and utilities like a registry editor, over/underclocker, personal data backupper in in in please.
Maggy said:
I believe I'd love to see a ROM with Word, Excell, PPT left out.But tiny tools and utilities like a registry editor, over/underclocker, personal data backupper in in in please.
Click to expand...
Click to collapse
Ur prayerz has just been answered..I removed all MS Office Components..games.added new themes and Ringtone..will add The registery editor..psSHutxp..fast cleanup
AND yes The Touch flo hangs up ur system like hell.go ask ^^RAC
*deleted*
removed that too.
ather90 said:
AND yes The Touch flo hangs up ur system like hell.go ask ^^RAC
Click to expand...
Click to collapse
I believe that ^^rac tried to use the original HTC TouchFlo. And I believe that will only run smoothly on Hima with a rewritten Hima dll driver.
But there is also a clone Touchflo around that uses no dll, see
http://forum.xda-developers.com/showthread.php?p=1504390#post1504390
I've not yet tried it because my Hima is still at a friend's home
BTW a single click bluetooth on/off toggle would be very welcome, as well as:
pocketcm http://forum.xda-developers.com/showthread.php?p=1504390#post1504390
notifyme http://forum.xda-developers.com/showthread.php?t=274822
ppc pim backup http://forum.xda-developers.com/showthread.php?t=299705&highlight=ppcpimbackup
taskmanager http://forum.xda-developers.com/showthread.php?t=280104
did I mention an over/underclocker and a registry editor?
guys I will release WM6 kitchen very soon, so you can add/remove what ever you need on the rom...
helmi_c said:
guys I will release WM6 kitchen very soon, so you can add/remove what ever you need on the rom...
Click to expand...
Click to collapse
Yehey! ur the man! I salute you!
helmi_c said:
guys I will release WM6 kitchen very soon, so you can add/remove what ever you need on the rom...
Click to expand...
Click to collapse
Thanks helmi_c
Could u pls explain to us weather we can use cube in Tofclock_helmi_c HimaWM6
In xda there is OEM pkg for black cube
Regards
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155...h_TouchFlo.zip
Click to expand...
Click to collapse
the linky is broke ...
watcher64 said:
the linky is broke ...
Click to expand...
Click to collapse
Fixed. Thanks
this is specially made for the wing?
Smilez_c said:
this is specially made for the wing?
Click to expand...
Click to collapse
apparently so ... the files downloaded are "WING OEM with TouchFlo"
mmm I'll have to try it later cuz right now i have the Touch-IT,WWE v1.1 UPDATED 10.09.07 I wonder if any significant difference
ok guys im giving it a try.... wish me luck ...
zacwhite15 said:
ok guys im giving it a try.... wish me luck ...
Click to expand...
Click to collapse
good luck............
Bad luck so far ......
looking at a bootloader screen and nothing else ...
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
Click to expand...
Click to collapse
I will try this rom now. But I still think that it is only included the TouchFlo, not the others app?
Is it possible if you cook a new rom based on the Wing OS like the version HERALD_WM6.0_4.17.07.12.PV? I have tried the Touch IT already but it could not compare with the .12.PV in general.
The biggest problem now is keyboard of Wing, it is different than 4350's keyboard. So if we can get the new rom with Wing OS, it is the best!
Thanks in advance!
Downloading now :] from the wifi across the street, this might take a while...
Please post asap guys how this works.
There are several questions I have:
Does this include ANY extra software?
if it doesnt include ANY, then is there a TF manager at least like touchflo 1.1?
Does this have the 6mb page pool applied to it?
It's the base tmob ruu, with touchflo. not bad but still way up on the mem usage since its the official ruu
i got it to install okay but i can't get touchflo started. there are no tf settings. it replaces the left soft key. some of the issues i read about before are apparent like clicking the "x" opens the right soft key.
reinstalling something else. GREAT JOB though and thanks for making this. i'll check it out again next release.
TF Settings are in the Programs Folder. It has the original page pool but, the quick page pool changer will still work. One thing I did notice though, the TF settings aren't checked but it does work for me. If it's not working, open the TF Settings and check 'Enable cube' and 'Enable Scroll'. Also set 'View mode' to 'TF default v4.1'. I'd hate to slim down the ROM and have it missing something that a lot of people use. If you want to customize the cube, open \Windows\BioTouch Settings. I will definitely be fixing a few things so post suggestions here. Don't expect any changes until next week though.
i couldn't find the settings dialouge in any folder. i went into the programs folder where all the programs are usually located (in the start menu) and then into all the subfolders, and couldn't find the settings. They were also not in the program files folder that i reached through file explorer.
Strange. it's all there for me. When I get home I'll flash back to the original RUU. Then reflash my version. Thanks for your input.
Almost the T-Mo ROM with Touch settings
Well it's almost what it says it is. Everything is there except for the basic T-Mo apps like Hotspot log-in, T-Zones and My5. Which isn't a bad thing becuase I don't use any of them, however it is the missing IM program, but again no big deal because that's available in th the forums here. All in all, so far I'm impressed.
is the keyboard layout correct??..other then that there will be no other reason to switch because some how i kept all my t-mobile files when i flashed to the touch it rom
Just a question. When i reflash, i normally cut out the customizing part. Is the touch-flo function a component of the "Customizing" function after a hard reset?
TF3D HD version as been ported from the blackstone to the sony X1
http://forum.xda-developers.com/showthread.php?t=442154
bc it has been sucessfully stripped and placed in cab form is there any hope for getting this running on our kaisers?
tf3d has already been ported to kaisers and other qvga devices...heres the cab silly
http://www.4shared.com/file/71379443/4e985d8e/TF3D-QVGA.html
pazookie said:
tf3d has already been ported to kaisers and other qvga devices...heres the cab silly
http://www.4shared.com/file/71379443/4e985d8e/TF3D-QVGA.html
Click to expand...
Click to collapse
lol correct me if im wrong but isnt this version not practical? ie cant turn off phone while enabled?
I will try it out ether way, but the version i listed as advantages over the version currently ported, new tables n stuff.
jug6ernaut said:
lol correct me if im wrong but isnt this version not practical? ie cant turn off phone while enabled?
I will try it out ether way, but the version i listed as advantages over the version currently ported, new tables n stuff.
Click to expand...
Click to collapse
true, the touch HD tf3d is something different than the tf3d from diamond/touch pro.
there currently working on the touch HD to port it to the Diamond/touch pro.
after that it wouldnt take to long to succesfully port this little cool app. to the kaiser and other qvga screens, just wait and see
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
All you needed to do was to reassign the Windows key back to the Start Menu after you uninstalled.
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
Not sure if you have the new HTC Class Action Drivers or not, but they are required to run the TF3D. It won't initialize without them.
splayer7 said:
Not sure if you have the new HTC Class Action Drivers or not, but they are required to run the TF3D. It won't initialize without them.
Click to expand...
Click to collapse
that and this is ment for the X1....which is a vga screen i believe
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
Reread the HTC-CA driver requirements. That Dutty rom doesn't qualify as WM6.1.
NuShrike said:
Reread the HTC-CA driver requirements. That Dutty rom doesn't qualify as WM6.1.
Click to expand...
Click to collapse
not to mention this is a VGA program...thats why i started this tread...to see if we could convert this cab for our kaisers...
Question asked and answered. Redundant thread closed.
does any body know how to make footprints to work with another gps program like garmin mobile xt?
Even better question...
How did you even get a version of Footprints to work on your Kaiser??(assuming you have a Kaiser)
Which CAB did you use... did u have to install anything else to get it to work... etc, etc, etc?????
haydenis14 said:
does any body know how to make footprints to work with another gps program like garmin mobile xt?
Click to expand...
Click to collapse
+1 to this. I have to install google maps in the device to have the full function of it.
Sean D. said:
How did you even get a version of Footprints to work on your Kaiser??(assuming you have a Kaiser)
Which CAB did you use... did u have to install anything else to get it to work... etc, etc, etc?????
Click to expand...
Click to collapse
You can find the cab in the m2d iolite version here http://forum.xda-developers.com/showthread.php?t=398173
I install it just fine in my kaiser.
there are a lot of files in that iolite thread - can you get us a bit closer to the location of the footprints cab?
That's what I'm saying.
warmkiwi99 said:
there are a lot of files in that iolite thread - can you get us a bit closer to the location of the footprints cab?
Click to expand...
Click to collapse
True story!
Inside the iolite m2d rar there is a cab called it test iolite footprints, that is the one i use and it works fine. I attach the link where u can download it here.
http://rapidshare.com/files/222241565/TEST_IOLITE_FOOTPRINTS.cab.html
I try to upload it here, but i get an error so i upload it to rapidshare
great, thanks. Yes, it installs and runs fine. Not sure what it does though
Dammit!
warmkiwi99 said:
great, thanks. Yes, it installs and runs fine. Not sure what it does though
Click to expand...
Click to collapse
It installed for me, showed an icon in the multimedia folder, but wouldn't start up at all.
I think I'm about ready to give the hell up on this one.
I have a stock Kaiser ROM, does that make a difference??
i have a stock (Vodafone) 6.1 ROM too but it runs OK. I'm just not sure what the app actually does
Uurgghhh!
warmkiwi99 said:
i have a stock (Vodafone) 6.1 ROM too but it runs OK. I'm just not sure what the app actually does
Click to expand...
Click to collapse
Then WTF am I doing wrong??