I'm rooting my G1 and i have flash RA's recovery.img.
Now i have flash DRC83_base_defanged, CyanogenMod and the newest radio with this guide http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod.
After radio he want to restart to finish the installation and after i restarted a HTC Logo came on. Now its 5-10minutes ago and the htc is still on...
Is that normal??? Or do i have to do something???
AHH, okay i had to restart with Call+Menu+Power...
Although THANKS^^
Keep in mind that when you're flashing a fresh Cyan rom you have to flash the HTCADP image and as soon as that is finished flash the Cyan rom and THEN reboot. If you try to boot the HTCADP image you'll loose root and you'll get the stock recovery image. It's quite a mess. Anyway cheers!
I followed the unlockr guide and did everything and now I am stuck on the g1 screen. I checked my radio and spl are the right number. I wiped everything then re-partitioned then re-updated it with the lastest rom and still stuck. Can anyone give me advice?
If you can get into recovery of bootloader than you aren't bricked.
I know it isn't bricked but it is still temporarily useless. I really want a custom ROM and I wish I knew why this thing was messing up.
You could always reflash using the .nbh file then go through the steps again =]
start from step 1 again
The only thing I could think of is when I updated the .spl I didn't wipe. Whenever I booted into the recovery (before using amon ra's, just the stock recovery) I didn't wipe the system before updating .spl. Whenever I wiped and tried to update .spl it would give me an error (I think the E:signature (5 files)). Anyways I will retry! Thanks for your help!
So I was running OpenEclair v1.1.1, and since putting eclair on it, I've been unable to flash to any other rom. It goes through the wipe/install process, but when the device reboots I just get the rogers screen forever. I can then go back into recovery and re-flash OpenEclair to get it working again. I just got through all that hassle with rogers and made it out with my data and my root, so I was now attempting to fix this issue, and figured it couldn't hurt to upgrade my radio and try out amon ra's 1.5.2R image.
Unfortunately, I downgraded the SPL to 1.33.0009 right after trying to flash another ROM which didn't work, and performed the downgrade before I put a working ROM back on it (to use flashrec to get to amenra's), so at present I can only get into the SPL. My cyanogen1.4 recovery seems to be gone as I just get the original triangle ! logo (no menu or anything) when trying to start up in recovery mode.
Now what did I do, and how far back do I need to dig through tutorials to get back to a working rooted ROM? I'm not really sure what point I'm actually at, whether I still have root or not, or where to start.
Ninzoku said:
So I was running OpenEclair v1.1.1, and since putting eclair on it, I've been unable to flash to any other rom. It goes through the wipe/install process, but when the device reboots I just get the rogers screen forever. I can then go back into recovery and re-flash OpenEclair to get it working again. I just got through all that hassle with rogers and made it out with my data and my root, so I was now attempting to fix this issue, and figured it couldn't hurt to upgrade my radio and try out amon ra's 1.5.2R image.
Unfortunately, I downgraded the SPL to 1.33.0009 right after trying to flash another ROM which didn't work, and performed the downgrade before I put a working ROM back on it (to use flashrec to get to amenra's), so at present I can only get into the SPL. My cyanogen1.4 recovery seems to be gone as I just get the original triangle ! logo (no menu or anything) when trying to start up in recovery mode.
Now what did I do, and how far back do I need to dig through tutorials to get back to a working rooted ROM? I'm not really sure what point I'm actually at, whether I still have root or not, or where to start.
Click to expand...
Click to collapse
Have you got a fastboot mode you can boot into? At least then you could fastboot boot a (non-peristent) recovery image to let you then restore from a nandroid backup...assuming you have some good backups either on the phone or on a PC that can be copied to the phone.
I should note you haven't said what kind of phone you have (G1 or Magic) or really provided anything resembling a complete set of relevant information about your phone and its current state. So it's hard to help.....even if this was the right forum...and it isn't.
Try formatting or using a new memory card.
I'm using a rogers Dream, I have a 2gb SD card with 32MB linux swap and 500MB ext3
HAD 1.33.2005 SPL, 1.4 cyanogen recovery image.
Now I have 1.33.0090, can't get into recovery.
Trying to boot normally brings me to a rogers screen.
I CAN get into fastboot, can I put cyanogen's recovery back on?
Sorry if this is the wrong forum, where should I have posted?
Also, I don't know what information IS relevant to this, so please bear with my noobness.
Is there a recovery that will let me flash a ROM without changing the SPL back to 2005? Apparently if I can get the phone to boot up I should be able to use flashrec to upgrade the radio and SPL from the point I'm currently at.
Moved as not Android Development.
So I'm not sure what I did but the phone boots now...
Holy sh** it wasn't just me. I have this SAME problem. After flashing eclair and wiping and flashing another ROM it just stays at my splashscreen FOREVER. Even broke my nandroid, so I can't restore. How I fix mine everytime: Flash a rom OVER open eclair boot up... you'll probably get a sht load of force closes and all that but once you ge tto login screen just reboot into recovery and wipe and flash or nandroid restore then it should work.
If you guys are rogers, then you will most likely be ebi1, in which case, dont forget that you must also flash an ebi1 kernal to get past the boot screen.
So the phone booted into the original 1.5, I didnt realize the downgrade of my SPL flashed the ROM too. I put flashrec on and flashed Amen Ra's new recovery image and the rogers radio update, this is what I'm at now.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA21000)
CPLD-4
Radio-3.22.26.17
Trying to flash to a custom rom again still fails. I've tried cyanogenmod, super D, and openEclair, it doesn't seem to matter. Where can I get an ebi1 kernel to flash?
E: looking at your signature, it seems I've got the right radio, I'll try using that port tool.
That did the trick! I followed the steps in your signature, flashed a rom, then flashed the ebi1 kernel and my phone booted like a dream. Pun intended.
Edit: So I'm back to only being able to run openeclair. Flashing cyanogen and then briancrook's ebi1 kernel still only gives me the rogers screen. I am however able to flash back to openEclair to get access to a working device again.
Edit: openEclair is running like garbage, it keeps completely locking up the device, I haven't even been able to log into my gmail account to get my contacts back.
Okay, I've managed to get the rom running smoothly by wiping everything, flashing the non-ramhack version of openEclair 1.2.2, then flashing the 1.2.2 ebi1 kernel. Unfortunately for some reason when I do get into eclair, I have no phone app, no settings, and no contacts app, even tho the contacts still work if i try to message someone. This is infuriating.
I installed CM6 stable on my N1 after performing a nand backup. I restored to the original rom today to check something out. Now I can't boot into recovery. I get the exclamation android Guy. I used amonRA. Any suggestions?
i've got the same error and i tried with awrecovery.img instead of recovery-RA-nexus-v1.7.0.img and its working
forum.xda-developers.com/showthread.php?t=636795
I think the stock ROM flashes stock recovery when you reboot. You are actually in stock recovery when you see that screen. Try hitting the volume down and power buttons at the same time. Same exact thing happened to me.
I just decided to skip the stock ROM for that reason.
I bet there is a workaround for it though.
One work around would be to flash recovery using rom manager.
pwig is right, you replaced your recovery with the stock one.
You need to re-root (if the stock isn't rooted - which I believe it isn't, since the only builds that include recovery are completely stock), and after rooting re-flash the recovery with Amon_RA's recovery.
I was trying to install Voodoo on my phone, it got through the first couple of steps (phone talking to me) then it went back to the android system recovery screen. If i try to reboot it goes to the att splash screen a couple times then goes back to the recovery screen. try to reinstall package and it runs some yellow text in regards to voodoo and then does the same thing.
I had the new stock froyo 2.2 and clockwork mod for recovery but i had the replace the install.zip with the voodoo.
I have no idea what to do at this point
steelcity said:
I was trying to install Voodoo on my phone, it got through the first couple of steps (phone talking to me) then it went back to the android system recovery screen. If i try to reboot it goes to the att splash screen a couple times then goes back to the recovery screen. try to reinstall package and it runs some yellow text in regards to voodoo and then does the same thing.
I had the new stock froyo 2.2 and clockwork mod for recovery but i had the replace the install.zip with the voodoo.
I have no idea what to do at this point
Click to expand...
Click to collapse
You will need the kernel that was made for the 2.2 update. Any vodoo will not work. Please search before opening a new thread.