Ok, i'm going to explain this as best as i can, and i hope you understand it.
I had a Tmobile dash, so i'm not new to flashing, just to android. It could be Pebkac, but i dont think so.
I just recently got my G1, and i followed the guide exactly to flash CyanogenMod-4.2.3.1 to it. Now, just about everything works, except that when i have bluetooth on and try and add only a SONG from the library to the playlist, it tries to scan for bluetooth devices. I've tried turning bluetooth off, and then it adds to playlist, however, i need bluetooth for my headset. It will add a whole album no problem, and same with artist. its just when i want to only add one song. Please help!
PS: Obviously this is on the Standard "Music" app that came preinstalled when i finished rooting/flashing.
Well, i'm updated to the latest CyanogenMod-4.2.6, and the problem still exists. has noone else seen this problem, even on other roms? anyone?
Related
I get the "Device Not Ready" popup in Media Player when a call comes in and switches over to my BT headset. It is frustrating to constantly have to clear the popup and try to yet again seek to where the hell I was on a podcast when the call came in! Is there a fix for this or is it just a "feature" of WMP and/or WinMo 6.1? I am hoping someone has a magic reg setting to make WMP behave on audio transfers to and from BT.
I have MSVC working fine via my Plantronics Voyager 510 and just want my music or podcast to pause when a call comes in then switch to my BT for the call duration then resume playing via speaker after the call is done.. is this asking too much?
This happens with every ROM I've flashed.. (although I only have flashed Dutty's last 4 releases). So, I am thinking others have it happen and live with it or I am just not tweaking my tilt properly. And, yes, I do a hard reset after every flash.. and everything else works fine.
I've searched but can't find if there is a solution to this. Any advice is greatly appreciated.
Thanks..
Hmm.. since no takers.. can u tell me if it happens to u?
With no replies on my post.. can anyone just confirm that this happens to them as well? I would think at least some of the xda peeps would have the phone playing a tune or podcast between calls. Does your phone switch audio without the "Device is not ready" error?
Just trying to see if it's only me...
Thanks.
I listen to MP3s (not WMP but Pocket Player or S2P) all the time while my phone is connected to my car's bluetooth handsfree system. I have never once observed a "device not ready" error pop-up when a phone call arrives. The music pauses and the handsfree takes over and starts ringing.
Might want to look at this thread: http://forum.xda-developers.com/showthread.php?p=2083364 as it seems that some people are seeing the same problem as you.
Rumball,
Thanks for your post. I guess it might be my bluetooth giving me the problem then. I've been needing a reason to buy a new z9.. so hopefully it will behave better since it's BT 2.0.
Thanks again for letting me know it works the way I imagined it should!
I just used kies to update my firmware. I have a Bell (Canada) gt-i9000m (vibrant). The update left all my settings from the old FW and in no time at all my phone was force closing apps. Did a full reset and it runs nicely had to put back all my apn settings and stuff. The only thing that's changed with the new FW is that I cant change songs from my bluetooth car deck and I cant even play or pause anymore For me its kinda a huge deal cuz I put all my music on the phone to play in my car and it was all working so nicely i could even fast forward in the track that was a one up on my old iphone (with the old FW). Now none of my bluetooth deck controls are working I do see the 2 touch buttons light up on the phone when i push buttons on my car deck so the phone is getting the command its just not responding. Any Ideas would be most helpful.
The only thing that's different is that I haven't re-rooted the phone yet or applied the lag fix because I was having a lot of force close problems and did 4 resets so far (i assume due to the lag fix). I was hoping the new FW would fix more problems that it made... I didn't take note of the stock FW on my bell i9000m at the very least I would flash that back on to get my bluethooth controls back if anyone knows the stock firmware or how to make it work with the JH2 FW?
do a factory reset/format
then start with new settings, it will work after you pair the devices again
I did a factory reset when i upgraded the FW because of the force close error's but I didn't format. So I did another factory reset followed by a format of both internal and external. Took over 3h's to get all my stuff back on the phone and the bluetooth controls are still not working in the car.
From all the trouble shooting I've done its one of two things;
1. The firmware JH2 changed something with the A2DP profiles.
OR
2. I haven't rooted or done the lag fix.
Those are the only things that are different from before.
If anyone knows the stock FW for the i9000m (bell vibrant) and/or a link to download it. It would be most helpful.
I will try re-rooting and applying the lag fix but i have a hunch that's not going to make my car deck start working with the phone any better.
The car deck i have is a KD-BT1 (made by JVC). Just to be clear I was able to control my phone via the controls on the deck & its remote with the old firmware. I have deleted my paired phone and re-paired before and after factory reset & format.
that's very strange.
i've had that problem before, but that was expect of every new flash i made.
i always had to make the Car Deck (Clario CZ509) forget the old Galaxy S, then pair it again with the flashed Galaxy S, then it works all good.
else i get really weird behaviour on both phones and Car Deck
I can stream excellent audio quality to the car, with nice sub (no loss) and be able to control remote both phone and/or car from either the Car Deck, the SGS Phone, or the Remote control that came with the Deck
it automatically switch between phone calls and music
Sounds like i should reflash my fw. Do you have a link to where you got yours cuz kies is no longer seeing my phone... just hangs trying to connect. Its happened many times i know the uninstall drill to make it work but i've invested so much time into my sgs i rather use odin this time over kies.
I've un-paired and re-paired them agian and agian the pair up no problem and i make sure to check off the box that pops up to always allow my bt device to access contacts, ect. It all sync's up flawlessly just dont have control. The music streams very clearly for me also (2x10s subs).
Btw thanks for your very helpful responses!
I'm still thinking it might be cuz yours is rooted and mine still isnt. trying that before i jump the gun on another re-flash.
are you using the stock "Music Player" (w/ ugly pink icon)??
Update...
I rooted and did the one click lag fix. A2DP controls still don't work. I was able to use the car deck to answer, hang up, dail a number it got from my contact list! I'm not sure if those were or weren't working before... I was only really conserned with the music controls and they still dont work.
I also tried calling Samsung to see if they could help me out with why I always get the force close errors. No luck they told me to call my carrier i told them I bought the phone from a differnt carrier... I'm on Fido with Bell phone. Samsung said Bell has to get the RMA if i need one.
I've herd the lag fix helps bring to light any memory problems and creates those force close errors. This is one of my big underlying issues with my i9000m it crash's all the time. I've factory reset at least 5 times and once it crashed from google maps looking for an address and it got stuck on the boot logo. I had to wipe from the recovery menu just to call my friend when i was out side of his building for like 30mins (didn't know the buzzer #) I thought the instability was due to the root and lag fix but the phone runs a lot worse with out them...
(never dropped banged or any kind of water/wetness)
sorry if i got a lil' off topic but the phone is running worse over time...
The stock music player app (called "Music Player") doesn't respond to the standard AVRCP controls (A2DP is phone-audio-to-bluetooth, AVRCP is remote-control-to-phone). Most other music player apps will. Are you sure you were using the standard music player previously? Anyway the solution is to use a different music player app.
Yes i was using the stock player before it worked fine.
I will try another one. I have been thinking that maybe something was changed with the stock music player with the FW update or maybe i need to go settings->apps->Musicplayer and clear the data... Going to try both and post my results tomorrow morning. Getting to late to go out to the car... LOL
I had a look at forum.xda-developers.com/showthread.php?p=7980935 and thing maybe something did change with my AVRCP version.
I cant "1.0—Basic remote control commands (play/pause/stop, etc.)"
My stereo also has a phone mode that is working that lets me make calls and answer calls using the car stereo. I dont know if that is also AVRCP or just like a reg bluetooth ear piece controls.
Well I couldn't sleep till i tried it. I installed MixZing mp3 player and some of the mp3 controls work now. Play and pause and rewind track but It wont skip to next track. So it looks like you hit the nail on the head and something changed with the Music Player when I updated the firmware.
Does anyone have a rip of the stock Music Player apk from the old firmware?
4u2nvinmtl said:
My stereo also has a phone mode that is working that lets me make calls and answer calls using the car stereo. I dont know if that is also AVRCP or just like a reg bluetooth ear piece controls.
Click to expand...
Click to collapse
That will be handsfree profile (HFP).
So its safe to assume something changed from my stock firmware to the one kies put on JH2 with the MusicPlayer app with regards to the AVRCP controls. I have yet to find a link of the stock firmware that was on my phone when I bought it, on the lunch date in Montreal.
Anyone got a link to the stock i9000m firmware from bell?
Thanks for all the help getting to the bottom of the problem.
Went to Bell store today to see if they could flash the old FW like Samsung told me they would. Guess what... they said they couldn't help because I "hacked" the phone even tho its Samsung's firmware. Apparently the use of Kies has voided my warranty.
4u2nvinmtl said:
are you using the stock "Music Player" (w/ ugly pink icon)??
Click to expand...
Click to collapse
I was until i changed it to "Player" that is the name of the app.
the Stock MP3 player that came with JH2 was really good, it had 5.1 sound, which other players app does not support yet.
the only reason i ditched it was due the annoying way how to add music to the play list, the new app is just Point to the folder you want, and click on select all/play all, done
when you are in the car driving, you have no fricking enough time to go select which album or artist or genre.
but playing off the Folder structure, you know where you put which songs, so you can quickly skip folders, fast forward, or reverse to reach the songs you want
all that aside the stock music player works well with the Bluetooth remote control options
i was using the stock music player for about a week in my car via bluetooth until i got annoyed of not being able to quickly pick from the SD card the songs i wanted to play
4u2nvinmtl said:
Anyone got a link to the stock i9000m firmware from bell?
Click to expand...
Click to collapse
I flashed mine via Kies JH2
4u2nvinmtl said:
Went to Bell store today to see if they could flash the old FW like Samsung told me they would. Guess what... they said they couldn't help because I "hacked" the phone even tho its Samsung's firmware. Apparently the use of Kies has voided my warranty.
Click to expand...
Click to collapse
i think they meant the SIMs unlocked or the phone Rooted
since you are already on JH2 which is legit
Moving on to something more Vibrant
Update...
I got my phone back from repairs 2 weeks ago. They flat out replaced the phone for a new one. This was a huge headache for me because the new one wasn't unlocked. Took Bell 2 hours to get the new one unlocked wile my wife waited out side double parked downtown! (I thought it would be a quick pick up and I would be out) The blue-tooth works flawlessly again!!
Much to my dismay the replacement phone has started acting up much like my first one did. It gets several force close errors a day and has gotten to the point where it no longer can send or receive text messages (using Handcent). The stock Music Player app also force closes at random with more frequently. It looks like I got another Lemon. This time around I did NOT root, lag-fix, or flash firmware. I will be sending it for repairs as soon as I can afford to buy another phone to use wile this one is off at repairs. My back up phone is a 3~ year old Iphone3g that my son has made his... (cracked screen, vol rockers dont work, power button is jammed in, the LCD screen it self is bleeding on the top edge)
The Vibrant never let me down other than as a phone. As a divx player or using all-share it rocks! I use these features A LOT to play my 720p divx movies on any TV or the projector in the bedroom .
with that being said I might keep the phone just as a portable movie player to bring from place to place and put my sim in something more stable.
Hi all, I have tried searching around and haven't managed to to find anything even remotely similar (if such a thread exists, I apologise and I would appreciate being pointed in the right direction), So i'm posting as a last resort, I really hope somebody is able to help me.
I am experiencing a lot of random "snicking" and clicking over btaudio A2DP between my xperia Z and my 2010 camry hybrid. The snicking is not present in bt calls, just bt audio playback. I have not experienced this problem with any of my older phones in the same car (iphone 4, 4s, sgs, sgs2, sgs3 have all been without issue).
The snicking is most noticeable in quiet or silent parts of a song, although lately from time to time it will progress from quiet snicking into full terrible distortion on every beat requiring me to pull over, unpair the phone, powercycle both the car and the phone and re-pair everything to get it back to something that is listenable.
I am using poweramp, but have tried several different music players to rule out the possibility of it being the player.
Has anybody encountered this, or able to help me troubleshoot it?
I am using a completely stock xperia Z, no mods whatsoever.
Thank you in advance for your time and assistance.
*bump*
surely there is somebody here that has an idea of whats going on?
dvcelica said:
*bump*
surely there is somebody here that has an idea of whats going on?
Click to expand...
Click to collapse
Are you using the Walkman app to play songs as a default player or at least have you tried... then I if problem is still there I would seek the advise of the shop from where bought ...
zalman360 said:
Are you using the Walkman app to play songs as a default player or at least have you tried... then I if problem is still there I would seek the advise of the shop from where bought ...
Click to expand...
Click to collapse
Thank you for your reply, I have tried with poweramp, and the standard walkman app, both have the same problem. I tried my wifes xz on the car and it was much much worse (dropping out, freezing etc) So I can only assume sony (or telstra) have screwed up the a2dp as it works completely fine in calls.
I might try dropping something non branded on it and see how it all goes.
Thank you for your time.
Hi all..
I have a minor problem for most that is important enough for me and keeps me away from all those wonderful custom ROMs..
That is:
The phone is set to "vibrate mode", I stream music through A2DP and it works great until someone calls me. Then the headset notifies about the call and the music I used to listen to is now played back loudly through the phone's speaker. That is very annoying, given that I discovered it when I was in my university's library trollolol.
I tried all versions, CM10.1, AOSP, AOKP and this happens in every single one of them. Only in stock based ROMs everything is working as it should..
This also happens with the apollo player and also with player pro.
Also tried Optimus Prime kernel by demetris_l, still the same.
Lastly, I also tried it with 2 different A2DP bluetooth headsets (Sony Ericsson MW-600 and Scosche tuneStreamII), both act the same.
Any help would be greatly appreciated...
Thanks for your time!
Update.. I managed to work around it by changing the applications I have been using.. Mortplayer works great and doesn't act like that, for instance.
Thing is, why did the apps like PlayerPro and Apollo worked ok and paused music playback during a call on the stock ROM but not on any of the custom ones?
Is it maybe that they can't use the READ_PHONE_STATE permission properly?
Thanks for providing a workaround atleast
thre was a guy saying that this doesnt happen to him, so dont you think it could be your BT headset?
profyler said:
thre was a guy saying that this doesnt happen to him, so dont you think it could be your BT headset?
Click to expand...
Click to collapse
Both of them?
Just updated to the Samsung Note4 from a SG5 and SG4 before that with many other Android phones.
I've been running into the issue that I can't find anyone else reporting or a resolution to and hope someone here can help.
I listen to podcast or Pandora. Unfortunately this version of Samsung Android, does not allow setting any other application as default for music or media playing.
When ever I connect through earphones, or Bluetooth the Music app automatically plays. Even when another audio app is running and when using either the earphones or Bluetooth button to pause or play will automatically start up the Music app and start playing.
I've partially stopped this by adding Bluetooth Connect & Play app from the Play Store. This is just a small fix that doesn't always work.
Interestingly enough when I turn off my car after listening to a Podcast or Pandora, I turn off the radio 1st to disconnect from the Bluetooth and also stop it from starting backup when I get in, the Phone immediately starts up the Music app and starts playing from the phone speaker.
I have already done a factory reset once.
I have contacted Samsung Support, only to be told that these features are "Samsung manufacturing design."
I have couple of options from what I can tell, Root the phone and change out the ROM with something that is close to stock but works, or Return the phone and take advantage of my 1st gen version of Jump and switch to the second phone in a year, which I am seriously debating. Might just go to the Nexus 6, maybe back to the Samsung GS5 which worked great, or join the herd and go with iPhone which really annoys me to be honest. I like being able to customize my phones which is what is really frustrating with this issue.
If anyone has any suggestions, similar experiences, or general helpful comments, its much appreciated.
Rooted the Note 4 today.
Disabled the Samsung Music app.
Set Google Play as the default music player, but the issue continues as it appears to be a Bluetooth communication issue.
What ever the default music app will respond to all Bluetooth controls, regardless if there is another music/media app running at that time.
Does anyone have a suggestion other than removing all MP3's on the phone and/or deselecting a default media app?
Thanks.
L0GiX
Just to post an update that others might be able to find helpful.
I found a old forum post about this exact issue on other android devices. One suggestion was an app called Media Button Router. It so far seems to be a work around for now.