Related
Heya, I have done the registry Tweak and GPS are visible I have setup Com Port 9 but tomtom will not work. I get Waiting for a vaild gps signal for ages then it goes to cannot find GPS Device.
My SPV M700 Information:
Operator Version: 19.123.1.615
ROM Version: 1.23.61.5
ROM Date: 01/25/07
Radio Version: 1.30.00.01
Protocol Version: 32.63.7020.08H
Network: Orange
Location: UK
I would perfer not to have to flash it but if i do need to could someone please post a guide.
Regards
Nick
try to configure gps in tomtom, like NMEA baudrate 9600 com port 9
Doesn't let me choose port 9, only
com3
GPS in com9
com7etc.
I choose com9 but any signal of gps.
Regards,
MM.
Ok.
Done.
Problem only with the signal that was to weak.
Great.
To Nick and mmelo
Did you only do the registry tweak to get GPS icon enabled and it started working???? or did you also flashed your ROM ? Because as far as I know, you do need to flash your ROM to get GPS working and the registry tweak is only to get the GPS icon. Correct me if I'm wrong.
I haven't flashed my ROM as waiting for genuine HTC ROM, but if only enableing GPS icon can get gps working then I might try that cause nt really want to flash with Dopod Rom.
Thanks.
I got it three days ago...
For Orange SPV M700, it doesn't need to do anything to have GPS, just install tomtom 6, and choose com9 GPS~~
So Orange SPV M700 (UK VERSION) has gps enabled ??? Ofcourse it would be better than the french version. Is this UK's gps enabled Orange ROM available anywhere? My HTC P3600 is unlocked and unbranded UK edition bought online.
Or any news of HTC ROM upgrade?
Thanks.
Working
Heya, I've got my GPS working it was just a matter of low signal.
These are the Settings i used:
1. Tweaked Reg to display GPS Icon.
GPS Program Port: COM1
GPS Hardware Port: COM9
Baud Rate: 4880
Manage GPS Automatically (Ticked)
Tomtom set to COM Port 9
Note that it can around about 15mins to recieve a GPS Signal and tomtom does try to say there is "no device found" while finding a singal but this is wrong. It is still trying to find a vaild singal it just takes awhile, but after setup once it connects quicker there after.
Thanks
Nick.123
But why does it take up to 15 min to get a valid signal?
It could take about 20 sec.. :\
I have mine set to:
Program port: GPD1
Hardwareport: COM9, 115200 Baud
Manage GPS automatially
Also in tomtom nav i got GPS setting of: NMEA GPS with 115200 baud.
And its connected to COM9 (not GPD1 as one could think, its not even an option). In the latest tomtom 6.030 custom for htc 3600 among others its possible to choose internal GPS device too.. i think i got that working if my mememory serves me right. But i downgraded coz I had some map-problems
I use RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.35.00.11_Ship as ROM. Before I tried the dopod verision, i got it working there too.
Sometime I get the signal after 1-2 minutes, sometime I need an hour for it to lock on some sats , not really reliable, I hope the oficcial ROM remedies that. A friend of mine has a bluetooth GPS for his trinity. It takes him between 2-10 minutes to lock on to sats even with that.
A tip for those with tomtom's that lock up and freeze sometimes.
Press the PHONE button to get your dialing screen, from there use the startbutton to start tomtom again (it doesnt reload the program it just hands back the control to the current running tomtom), then you can use it again. It doesn't always work though, sometimes it's necessary to reset the phone.
Sorry people, I'm an absolute moron when it comes to programming etc - so none of this is English to me.
I've recently got the M700 and am aware of the GPS being encrypted. Also, being an Orange member of staff, you would think that I'd get some kind of help from our "technical team" when it comes to unlocking the damn thing - but alas, they "cannot do it".
So, here I am, asking for a little help in getting the GPS activated...Pleeeeease
Hi, i have flashed may HTC P3600 with TRIN_RADIO_1.38.00.11_Only_SSPL but it does not want any to know to go!
Mine puts into effect them situation is:
ROM : 1.15.408.2
Radio ROM 1.38.00.11
Version extrom 1.15.408.101
Versione Protocollo: 32.71.7020.12H
TOM TOM 6.030.
I have tried all but I just do not succeed to make to go it. While com the 9 do not appear to me just in tom tom, and then I asked myself if before the gps it had to be found from the bluetoth. I have tried also with gps tuner but it says to me gps not found.
I ASK AID!! PLEASE HELP ME.
Hello, I have done the following thing and everything without problems has worked me:
1º) Is necessary to install some of the ROM that has the activated GPS. In my case: RUU_Trinity_HTC_WWE_1 [1] .23.800.2_6275_ 1.35.00.11 _Shi p.exe.
2º) Later, I have updated the Radio with TRIN_RADIO_ 1.38.00.11 _Only_SSPL (this step is not essential).
3º) After it, I have installed drivers of the GPS for ROM Lvsw (HTC_GPSdriver.cab).
4º) I am modifying key HKEY_LOCAL_MACHINE \ ControlPanel \ GPS Settings to activate the icon of the GPS, so that it appears in Settings / connections, in that I have put: GPS prog port: GPD1; GPS hardware port: COM9; Baud rate: 115200.
5º) I have installed the TomTom, version 6.030.8320, and in the Gps configuration: GPS type: Other nmea GPS; Baud rate: 115200; GPS in COM9.
The first time has taken about 4 minutes in taking satétiletes.
Second and the later ones, in about 15 seconds…
I hope that this helps somebody… GREETINGS (excuses by my English incorrect one, but the fault has the translator of google... )
hello, I take or but of two weeks with the ROM of Lvsw with the activated GPS, to people it gave problems him of blockades with tomtom, I haven´t this problem , but this weekend I have made a long trip and I have realized of which tomtom is hung when 3G or UMTS is no signal, that is to say, that the GPS lets work when there is no signal of 3G, I have proven it xq I have put I telephone in GSM and the GPS is not connected, but i have active 3G in telephone, the GPS activates at the moment in he himself place where without 3G not it connected, and for that reason tomtom is blocked when losing the signal of 3G becomes crazy and it is blocked, I hope that somebody knows like using the GPS without the signal 3G
hola, llevo ya mas de dos semanas con la rom de Lvsw con el GPS aqctivado, a la gente le daba problemas de bloqueos con el tomtom, yo no tenía ninguno, pero estae finde he realizado un viaje largo y me he dado cuenta de que el tomtom se cuelga cuando no hay señal 3G o UMTS, es decir que el GPS deja de funcionar cuando no hay señal de 3G, lo he probado xq he puesto el telefono en GSM y no se conecta el GPS ni aunquer pase tres horas, pero si activo el 3G en el telefono, el GPS se activa de momento en el mismo lugar donde sin el 3G no se conectaba, y por eso se bloquea el tomtom xq al perder la señal del 3G se vuelve loco y se bloquea, espero que alguien sepa como utilizar el GPS sin la señal 3G
is tomtom navigator 5 working, too?
here in germany they sell tomtom6 in the vodafone shops as a special VPA compact GPS-version. But did anyone try tomtom 5 yet?? Just asking, 'cause I need maps including germany and poland - but the new western europe coming with TT6 don't cover PL. The TT5 version is still available with DACH PL CZ-maps... So please tell me if someone successfully runs TTN5 !!
THX, S.
M700 & Tom Tom Freezing
I have been trying to work out why my M700 freezes when using Tom Tom Navigator 6 with maps of Western Europe.
Turns out it is the speed camera's POI from other countries that causes it.
So remove all the speed camera POI and it works fine. (Not sure which "Speed Cam. POI country " is the calprut, but left only UK on and this works.)
Che Stel said:
Sorry people, I'm an absolute moron when it comes to programming etc - so none of this is English to me.
I've recently got the M700 and am aware of the GPS being encrypted. Also, being an Orange member of staff, you would think that I'd get some kind of help from our "technical team" when it comes to unlocking the damn thing - but alas, they "cannot do it".
So, here I am, asking for a little help in getting the GPS activated...Pleeeeease
Click to expand...
Click to collapse
GPS is already active on the Orange M700, for some reason your Marketing Department hasnt bothered pushing this as a feature at all, but hey-ho.
To get it working get tom tom 6.03 OR search for GPSUtil125Setup.exe this will show you your GPS and get it talking. Otherwise arent sure what GPS being encrypted has to do with anything
BTW slap your IT support department cos last timeI phoned them I had to teach them about the phone
soulgecko said:
here in germany they sell tomtom6 in the vodafone shops as a special VPA compact GPS-version. But did anyone try tomtom 5 yet?? Just asking, 'cause I need maps including germany and poland - but the new western europe coming with TT6 don't cover PL. The TT5 version is still available with DACH PL CZ-maps... So please tell me if someone successfully runs TTN5 !!
THX, S.
Click to expand...
Click to collapse
I have tried the TomTom 5 on a Compact II and have all these maps you are talking about
It works perfectly fine
You can have the maps copied if you wish
(I would gladly take from someone the Naviagtor 6 maps for my new HTC P3300)
You can contact 0172 7515595
At the end of the day yesterday Fring released the 3.34 version that is using correctly the internal loudspeaker for our HTC phones!!!
Just installed it and it works indeed!
Hope this can help all people that as me were waiting for a VoIP client for "normal" calls...
Oh and it even works on WM6.1, finally
thanks!
so nice toknow about it!
finally no more echo.
dengi_it said:
At the end of the day yesterday Fring released the 3.34 version that is using correctly the internal loudspeaker for our HTC phones!!!
Just installed it and it works indeed!
Hope this can help all people that as me were waiting for a VoIP client for "normal" calls...
Click to expand...
Click to collapse
Thanks dengi,
that's a great news!!
When do u think this improvement will be available for other brand, like my Samsung SGH-i780?
It seems there is a little bug though, I already set it to use "WiFi Only" but I noticed that Fring randomly tries to connect via 3G.
Not working on HTC TyTN (WM 6.1)
....I mean the earpiece!! The switch is available but everything is muted.
vittogn said:
....I mean the earpiece!! The switch is available but everything is muted.
Click to expand...
Click to collapse
Ciao Vittore, mi spiace ma in effetti nel sito Fring c'è scritto chiaramente che il problema dell'altoparlante interno è risolto solo sui telefoni HTC!
Non ho idea per altri brand quando risolveranno...
Hi Vittore, I'm sorry but the Fring website clearly states that at the very moment they only fixed the internal loudspeaker for the HTC devices!
I've no idea how long they need to fix this for other brands....
Well, the Tytn is an HTC device as far as I know
dengi_it said:
Ciao Vittore, mi spiace ma in effetti nel sito Fring c'è scritto chiaramente che il problema dell'altoparlante interno è risolto solo sui telefoni HTC!
Non ho idea per altri brand quando risolveranno...
Hi Vittore, I'm sorry but the Fring website clearly states that at the very moment they only fixed the internal loudspeaker for the HTC devices!
I've no idea how long they need to fix this for other brands....
Click to expand...
Click to collapse
Well the TyTN is the very first HTC branded smartphone lauched......definitely HTC!!
And it definitely does not work!!
Sorry for the misunderstanding: I thought that Vittore had troubles with Samsung only and not that he also tryed with a Tytn II
I perfectly know Tytn II is an HTC device and as matter of fact it works to me and to the two first users who answered this thread: KILRAH and XCESSPDA
When I activate a call via Fring now with my phone (with WM 6.1 using the standard official HTC ROM) the default is the internal earpiece. And if during the call I press the "switch" button, the audio passes from the internal earpiece to the external loudspeaker and viceversa
And other users are using successfully this new release
So it would be interesting investigating what the specific problem is to whom has troubles. Are you Vittore using the same ROM? Have you checked all the volume controls in the phone and in the Fring application?
To me I can confirm that now Fring is perfectly working on Tytn II.
dengi_it said:
To me I can confirm that now Fring is perfectly working on Tytn II.
Click to expand...
Click to collapse
You're mixing again, he tryed with a TyTN, not a TyTN II
So, different device, different hardware, possibly different behavior.
But he has to take some too, this is the TyTN II forum so wouldn't be the right place to post it, like we can see it gets people confused
Oooops,
thank you very much for your clarification, Kilrah!
kilrah said:
You're mixing again, he tryed with a TyTN, not a TyTN II
So, different device, different hardware, possibly different behavior.
But he has to take some too, this is the TyTN II forum so wouldn't be the right place to post it, like we can see it gets people confused
Click to expand...
Click to collapse
I'm sorry......Ii know I'm not in the right place....but it is so difficult to get info from fring and their forum....
I'm going away!!
works for O2 Stellar official rom WM6.1
Just to confirm that it works (can hear the Skype call from the earpiece instead of the loudspeaker!) for me with an O2 Stellar running official RUU_Kaiser_O2_UK_3.29.206.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe rom
Thanks for the update! Without this thread, I would probably have abandoned Fring! :-D
first voip software that works flawlessly
Dispositivo: HTC Tytn II Italia
Rom: Originale-25.83.40.02
Radio: Originale-1.65.17.56
Operatore: Wind
unfortunately I do not speak English, translator
I do not know if it's a conscious failure, before the SW is completely open (green screen written 6.1) can be seen below from screen to open something that you see are the notes for registration, telephone letters (C, d, e, f ) and the keyboard and all buttons unresponsive, sometimes does not meet even the power button from standby.
Sometimes having no battery for some time has begun to work well for a few hours. I noticed that when it does not work does not meet even the bootloader (camera-power-reset)
In December I had sent for service and warranty, but having been without a battery I have sent and wrote''no defect''.
The defect exists and is unusable after a while because of all crashes, time to start no problem everything works perfectly.
thanks
-------------------------------------------
Non so se è un difetto consciuto, prima che il SW si apra del tutto (schermo verde scritta 6.1) si vede sotto partire qualcosa che a schermo aperto si vede siano le note di registrazione, telefono con lettere (c,d,e,f) e la tastiera e tutti i tasti non rispondono ai comandi, a volte non risponde nemmeno il tasto di accensione da standby.
A volte tenuto senza batteria per un po di tempo ha ricominciato a funzionare bene per qualche ora. Ho notato che quando non funziona non risponde nemmeno il bootloader (camera-power-reset)
A dicembre lo avevo mandato in assistenza e garanzia ma essendo stato senza batteria me lo hanno rimandato e scritto ''nessun difetto riscontrato''.
Il difetto esiste ed è inutilizzabile perchè dopo un po si blocca del tutto, quando in avvio non presenta problemi tutto funziona perfettamente.
grazie
I added the video file
--------------------
Ho aggiunto il file video
I also have this problem. I have disassembled the phone and used a compressor to clean it. No improvement I also disconnected the qwerty keyboard which made no difference
Now under pressure after data with HSDPA (battery very hot) has begun to work
but I do not know how long continue
garand_it said:
Now under pressure after data with HSDPA (battery very hot) has begun to work
but I do not know how long continue
Click to expand...
Click to collapse
returned the defect
sometimes i can no longer turn on to stantby, reset or take out the battery
Some issues about it.
I'have the same trouble since I instal an Spanish version of WM 6.5. At the beginning works fine, but then, when I told to A. Sync, not do nothing except connect to device, my contacts dessapear from WM contacts, and the camera stop working at some time from that; may be, and I'm guessing, could be the problem when you mix those factors, the foreign language, conecting without sync and having the PC conected to the WEB. Could it be?.
My conf.
This is my conf:
Windows Server 2003 R2.
Active Sync v4.5
My mobile (this program causes errors sometime, it seem that it try to write to the protected memory of W2003, and give WEP problems).
Windows Mobile INT2MIL WM6.5 ROM 0C0A V1.0 23071.
HTC AT&T 8925.
I hope this help to fix errors in the future.
michael_llewellyn said:
I also have this problem. I have disassembled the phone and used a compressor to clean it. No improvement I also disconnected the qwerty keyboard which made no difference
Click to expand...
Click to collapse
anything new? have resolved the defect TyTN2?
garand_it said:
anything new? have resolved the defect TyTN2?
Click to expand...
Click to collapse
I was again playing with the data hsdpa when suddenly has 4 sounds event / error and started to work well.
I decided, HTC has not yet replied (pretty seriously, I think that if I can not buy more HTC) returns as soon as I open the kaiser.
Hi everybody.
Sorry to disturb you but i have a serious problem with my xperia.
I recently tried the new nand version of sp3dev's CM 7 with his new kernel wich solved the problem of wifi suspend ecc...
now, i got back to WM.
I thought i did all right but now i phone is stuck in Gsm mode,
only sometimes it gets to EDGE and never to 3g or HSDPA.
When in GSM i have full coverage, but i can't call nor recieve..
I tried everything:
Task 29
new ROM (Dynamics)
new RADIO (1.17)
Task 29
new ROM again (Energy (just to try..))
but nothing seems to solve..
I tried the sim on another mobile phone, and i can call/recieve.
Thank you for the answers you will give me.
PS. i'm italian and my provider is TIM
hai la 3? Se si anche io sto avendo un sacco di problemi da qualche giorno su una scheda si e sull'altra no
Hem.. i feel a little stupid, but now everything works fine..
I mean, i don't know why, i changed nothing on my phone.
Half an hour after the boot (it still showed Gsm signal)
I recieved a call... and a minute later all the messages that were sent to me during the "blackout".
Now 3g/HSDPA is fully working (i am listening to an album on youtube..)
I really don't know what happend.. maybe flashing the radio helped... but i don't know why it worked just after half an hour.
I feel sorry for occupying space on the forum.
Close or delete
PS. grazie per l'interessamento lemon88. Ero tre, ora sono Tim.. e comunque ora va tutto bene..
Because the problem was solved after half an hour, I think it wasn't a flashing-related problem.
Either there was a problem with your mobile network (even if the signal is strong), or maybe a problem with wm (maybe it's busy searching for media/images on first boot).
Glad your problem was solved, though
Hello all!
I have identified a delay when i receive a phone call, my watch starts vibrating some seconds after (i haven't measured, but 5 to 10 seconds). Sometimes I have even finished the call before the watch starts vibrating... Does anyone of you meet this? How could I solve it?
Thx...
I have the same problem. I would be finished with the call and 10 seconds later my watch alerts me of the call. One time my watch alerts me of the call. I answer the call and the watch kept alerting me for about 30seconds.
Sometimes it happens too but only when watch connects through wifi.
Still the same problem... Only SMS are notified on phone and watch at the same time... I feel pretty alone with this issue
I tried to use the stock faces instead of watchmaker ones, but still the same... Could the problem come from the phone itself? (G S4 mini)
solutions?
francyesco said:
solutions?
Click to expand...
Click to collapse
:crying::crying::crying:
Nooooo! Either I'm the only one meeting this issue, or nobody cares about this delay.......
zarnox said:
:crying::crying::crying:
Nooooo! Either I'm the only one meeting this issue, or nobody cares about this delay.......
Click to expand...
Click to collapse
I'm also having this issue...only calls seems have this bug... I've also disable phone vibration/sounds when watch is connected so sometime as result i will lose the call
Probably you guys are having Touchwizz. I have used the watch with Nexus 6 and OnePlus X; everything works perfectly.
bioan said:
Probably you guys are having Touchwizz. I have used the watch with Nexus 6 and OnePlus X; everything works perfectly.
Click to expand...
Click to collapse
G4 with W100..
I did some tests, but no success up to now:
- With or without Nova launcher
- With or without Wear Mini launcher
- With or without "Ignore alerts and calls when connected to the phone"
I still don't know what could interfere regarding notifications. I will try to clean the watch completely without any app to see if it's better... I'll keep you informed.
No success. Watchmaker premium unistalled, Wear Mini launcher uninstalled, hard reset of the watch, complete new install, still the lag... What I don't understand is that I had no issue 6 month ago when my watch was brand new (and same phone)... Could it be the LG firmware?
zarnox said:
No success. Watchmaker premium unistalled, Wear Mini launcher uninstalled, hard reset of the watch, complete new install, still the lag... What I don't understand is that I had no issue 6 month ago when my watch was brand new (and same phone)... Could it be the LG firmware?
Click to expand...
Click to collapse
Probably the issue come with the latest versions of android wear...
For me the issue was here from the first use .... Just realized later.
CA Y EST!!! J'AI ENFIN TROUVE!!!!!!!
Le problème vient d'Android Wear installé sur le mobile... Les versions 1.3 et 1.4 sont buggées et génère ce décalage de notification.
J'ai installé une ancienne version d'AW (la 1.1) trouvée ici: http://www.apkmirror.com/apk/google-inc/android-wear/android-wear-1-1-1-2113877-android-apk-download/
Depuis cette installation, ma montre notifie les appels dans la seconde qui suit celle du téléphone... Pourvu que ça dure! :fingers-crossed:
J'espère que ça servira à tous ceux qui ont le même problème.
:highfive::highfive::highfive:
zarnox said:
CA Y EST!!! J'AI ENFIN TROUVE!!!!!!!
Le problème vient d'Android Wear installé sur le mobile... Les versions 1.3 et 1.4 sont buggées et génère ce décalage de notification.
J'ai installé une ancienne version d'AW (la 1.1) trouvée ici: http://www.apkmirror.com/apk/google-inc/android-wear/android-wear-1-1-1-2113877-android-apk-download/
Depuis cette installation, ma montre notifie les appels dans la seconde qui suit celle du téléphone... Pourvu que ça dure! :fingers-crossed:
J'espère que ça servira à tous ceux qui ont le même problème.
:highfive::highfive::highfive:
Click to expand...
Click to collapse
Oups I was so happy that I wrote it in French
Here is the translation:
"I found a solution, the issue is linked to Android Wear software installed on the phone. Rev 1.3 and 1.4 are bugged and it brings delay between phone call notification and watch call notification (up to 30 seconds!)
I installed a previous revision of AW found here: http://www.apkmirror.com/apk/google-inc/android-wear/android-wear-1-1-1-2113877-android-apk-download/
Since this installation, my watch notifies calls within one second after the phone one. May it continue like this!!!
zarnox said:
Oups I was so happy that I wrote it in French
Here is the translation:
"I found a solution, the issue is linked to Android Wear software installed on the phone. Rev 1.3 and 1.4 are bugged and it brings delay between phone call notification and watch call notification (up to 30 seconds!)
I installed a previous revision of AW found here: http://www.apkmirror.com/apk/google...roid-wear-1-1-1-2113877-android-apk-download/
Since this installation, my watch notifies calls within one second after the phone one. May it continue like this!!!
Click to expand...
Click to collapse
Its just a workaround with version 1.1 of AW i think we will lose a lot of nice features done later.
Btw thanks for the feedback.
I too get this sometimes. Phone is Sony Xperia Z3 compact running Android 6.0.1.
I had the same issue for months. Then I had to factory reset my phone (Note4). After reinstalling, restoring backup, the watch did resync and the problem was gone..
Same here. Note 3 with android 6.0.1
Seems i've found a "workaround" try to active always on display calls will be show immediately
(Sorry for my bad english)
I got my watch a month ago, and it bothers me a lot that the caller ID takes almost 10 seconds to show the name or phone number. Before I had the Sony SmartWatch 2 and had no problems with this feature. Everything works great, but this is a major flaw. Having display on, doesn't work for me. I hope that we won't have this problem with Google wear 2.
I have it paired with my Huawei p9