Related
Heya, I have done the registry Tweak and GPS are visible I have setup Com Port 9 but tomtom will not work. I get Waiting for a vaild gps signal for ages then it goes to cannot find GPS Device.
My SPV M700 Information:
Operator Version: 19.123.1.615
ROM Version: 1.23.61.5
ROM Date: 01/25/07
Radio Version: 1.30.00.01
Protocol Version: 32.63.7020.08H
Network: Orange
Location: UK
I would perfer not to have to flash it but if i do need to could someone please post a guide.
Regards
Nick
try to configure gps in tomtom, like NMEA baudrate 9600 com port 9
Doesn't let me choose port 9, only
com3
GPS in com9
com7etc.
I choose com9 but any signal of gps.
Regards,
MM.
Ok.
Done.
Problem only with the signal that was to weak.
Great.
To Nick and mmelo
Did you only do the registry tweak to get GPS icon enabled and it started working???? or did you also flashed your ROM ? Because as far as I know, you do need to flash your ROM to get GPS working and the registry tweak is only to get the GPS icon. Correct me if I'm wrong.
I haven't flashed my ROM as waiting for genuine HTC ROM, but if only enableing GPS icon can get gps working then I might try that cause nt really want to flash with Dopod Rom.
Thanks.
I got it three days ago...
For Orange SPV M700, it doesn't need to do anything to have GPS, just install tomtom 6, and choose com9 GPS~~
So Orange SPV M700 (UK VERSION) has gps enabled ??? Ofcourse it would be better than the french version. Is this UK's gps enabled Orange ROM available anywhere? My HTC P3600 is unlocked and unbranded UK edition bought online.
Or any news of HTC ROM upgrade?
Thanks.
Working
Heya, I've got my GPS working it was just a matter of low signal.
These are the Settings i used:
1. Tweaked Reg to display GPS Icon.
GPS Program Port: COM1
GPS Hardware Port: COM9
Baud Rate: 4880
Manage GPS Automatically (Ticked)
Tomtom set to COM Port 9
Note that it can around about 15mins to recieve a GPS Signal and tomtom does try to say there is "no device found" while finding a singal but this is wrong. It is still trying to find a vaild singal it just takes awhile, but after setup once it connects quicker there after.
Thanks
Nick.123
But why does it take up to 15 min to get a valid signal?
It could take about 20 sec.. :\
I have mine set to:
Program port: GPD1
Hardwareport: COM9, 115200 Baud
Manage GPS automatially
Also in tomtom nav i got GPS setting of: NMEA GPS with 115200 baud.
And its connected to COM9 (not GPD1 as one could think, its not even an option). In the latest tomtom 6.030 custom for htc 3600 among others its possible to choose internal GPS device too.. i think i got that working if my mememory serves me right. But i downgraded coz I had some map-problems
I use RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.35.00.11_Ship as ROM. Before I tried the dopod verision, i got it working there too.
Sometime I get the signal after 1-2 minutes, sometime I need an hour for it to lock on some sats , not really reliable, I hope the oficcial ROM remedies that. A friend of mine has a bluetooth GPS for his trinity. It takes him between 2-10 minutes to lock on to sats even with that.
A tip for those with tomtom's that lock up and freeze sometimes.
Press the PHONE button to get your dialing screen, from there use the startbutton to start tomtom again (it doesnt reload the program it just hands back the control to the current running tomtom), then you can use it again. It doesn't always work though, sometimes it's necessary to reset the phone.
Sorry people, I'm an absolute moron when it comes to programming etc - so none of this is English to me.
I've recently got the M700 and am aware of the GPS being encrypted. Also, being an Orange member of staff, you would think that I'd get some kind of help from our "technical team" when it comes to unlocking the damn thing - but alas, they "cannot do it".
So, here I am, asking for a little help in getting the GPS activated...Pleeeeease
Hi, i have flashed may HTC P3600 with TRIN_RADIO_1.38.00.11_Only_SSPL but it does not want any to know to go!
Mine puts into effect them situation is:
ROM : 1.15.408.2
Radio ROM 1.38.00.11
Version extrom 1.15.408.101
Versione Protocollo: 32.71.7020.12H
TOM TOM 6.030.
I have tried all but I just do not succeed to make to go it. While com the 9 do not appear to me just in tom tom, and then I asked myself if before the gps it had to be found from the bluetoth. I have tried also with gps tuner but it says to me gps not found.
I ASK AID!! PLEASE HELP ME.
Hello, I have done the following thing and everything without problems has worked me:
1º) Is necessary to install some of the ROM that has the activated GPS. In my case: RUU_Trinity_HTC_WWE_1 [1] .23.800.2_6275_ 1.35.00.11 _Shi p.exe.
2º) Later, I have updated the Radio with TRIN_RADIO_ 1.38.00.11 _Only_SSPL (this step is not essential).
3º) After it, I have installed drivers of the GPS for ROM Lvsw (HTC_GPSdriver.cab).
4º) I am modifying key HKEY_LOCAL_MACHINE \ ControlPanel \ GPS Settings to activate the icon of the GPS, so that it appears in Settings / connections, in that I have put: GPS prog port: GPD1; GPS hardware port: COM9; Baud rate: 115200.
5º) I have installed the TomTom, version 6.030.8320, and in the Gps configuration: GPS type: Other nmea GPS; Baud rate: 115200; GPS in COM9.
The first time has taken about 4 minutes in taking satétiletes.
Second and the later ones, in about 15 seconds…
I hope that this helps somebody… GREETINGS (excuses by my English incorrect one, but the fault has the translator of google... )
hello, I take or but of two weeks with the ROM of Lvsw with the activated GPS, to people it gave problems him of blockades with tomtom, I haven´t this problem , but this weekend I have made a long trip and I have realized of which tomtom is hung when 3G or UMTS is no signal, that is to say, that the GPS lets work when there is no signal of 3G, I have proven it xq I have put I telephone in GSM and the GPS is not connected, but i have active 3G in telephone, the GPS activates at the moment in he himself place where without 3G not it connected, and for that reason tomtom is blocked when losing the signal of 3G becomes crazy and it is blocked, I hope that somebody knows like using the GPS without the signal 3G
hola, llevo ya mas de dos semanas con la rom de Lvsw con el GPS aqctivado, a la gente le daba problemas de bloqueos con el tomtom, yo no tenía ninguno, pero estae finde he realizado un viaje largo y me he dado cuenta de que el tomtom se cuelga cuando no hay señal 3G o UMTS, es decir que el GPS deja de funcionar cuando no hay señal de 3G, lo he probado xq he puesto el telefono en GSM y no se conecta el GPS ni aunquer pase tres horas, pero si activo el 3G en el telefono, el GPS se activa de momento en el mismo lugar donde sin el 3G no se conectaba, y por eso se bloquea el tomtom xq al perder la señal del 3G se vuelve loco y se bloquea, espero que alguien sepa como utilizar el GPS sin la señal 3G
is tomtom navigator 5 working, too?
here in germany they sell tomtom6 in the vodafone shops as a special VPA compact GPS-version. But did anyone try tomtom 5 yet?? Just asking, 'cause I need maps including germany and poland - but the new western europe coming with TT6 don't cover PL. The TT5 version is still available with DACH PL CZ-maps... So please tell me if someone successfully runs TTN5 !!
THX, S.
M700 & Tom Tom Freezing
I have been trying to work out why my M700 freezes when using Tom Tom Navigator 6 with maps of Western Europe.
Turns out it is the speed camera's POI from other countries that causes it.
So remove all the speed camera POI and it works fine. (Not sure which "Speed Cam. POI country " is the calprut, but left only UK on and this works.)
Che Stel said:
Sorry people, I'm an absolute moron when it comes to programming etc - so none of this is English to me.
I've recently got the M700 and am aware of the GPS being encrypted. Also, being an Orange member of staff, you would think that I'd get some kind of help from our "technical team" when it comes to unlocking the damn thing - but alas, they "cannot do it".
So, here I am, asking for a little help in getting the GPS activated...Pleeeeease
Click to expand...
Click to collapse
GPS is already active on the Orange M700, for some reason your Marketing Department hasnt bothered pushing this as a feature at all, but hey-ho.
To get it working get tom tom 6.03 OR search for GPSUtil125Setup.exe this will show you your GPS and get it talking. Otherwise arent sure what GPS being encrypted has to do with anything
BTW slap your IT support department cos last timeI phoned them I had to teach them about the phone
soulgecko said:
here in germany they sell tomtom6 in the vodafone shops as a special VPA compact GPS-version. But did anyone try tomtom 5 yet?? Just asking, 'cause I need maps including germany and poland - but the new western europe coming with TT6 don't cover PL. The TT5 version is still available with DACH PL CZ-maps... So please tell me if someone successfully runs TTN5 !!
THX, S.
Click to expand...
Click to collapse
I have tried the TomTom 5 on a Compact II and have all these maps you are talking about
It works perfectly fine
You can have the maps copied if you wish
(I would gladly take from someone the Naviagtor 6 maps for my new HTC P3300)
You can contact 0172 7515595
At the end of the day yesterday Fring released the 3.34 version that is using correctly the internal loudspeaker for our HTC phones!!!
Just installed it and it works indeed!
Hope this can help all people that as me were waiting for a VoIP client for "normal" calls...
Oh and it even works on WM6.1, finally
thanks!
so nice toknow about it!
finally no more echo.
dengi_it said:
At the end of the day yesterday Fring released the 3.34 version that is using correctly the internal loudspeaker for our HTC phones!!!
Just installed it and it works indeed!
Hope this can help all people that as me were waiting for a VoIP client for "normal" calls...
Click to expand...
Click to collapse
Thanks dengi,
that's a great news!!
When do u think this improvement will be available for other brand, like my Samsung SGH-i780?
It seems there is a little bug though, I already set it to use "WiFi Only" but I noticed that Fring randomly tries to connect via 3G.
Not working on HTC TyTN (WM 6.1)
....I mean the earpiece!! The switch is available but everything is muted.
vittogn said:
....I mean the earpiece!! The switch is available but everything is muted.
Click to expand...
Click to collapse
Ciao Vittore, mi spiace ma in effetti nel sito Fring c'è scritto chiaramente che il problema dell'altoparlante interno è risolto solo sui telefoni HTC!
Non ho idea per altri brand quando risolveranno...
Hi Vittore, I'm sorry but the Fring website clearly states that at the very moment they only fixed the internal loudspeaker for the HTC devices!
I've no idea how long they need to fix this for other brands....
Well, the Tytn is an HTC device as far as I know
dengi_it said:
Ciao Vittore, mi spiace ma in effetti nel sito Fring c'è scritto chiaramente che il problema dell'altoparlante interno è risolto solo sui telefoni HTC!
Non ho idea per altri brand quando risolveranno...
Hi Vittore, I'm sorry but the Fring website clearly states that at the very moment they only fixed the internal loudspeaker for the HTC devices!
I've no idea how long they need to fix this for other brands....
Click to expand...
Click to collapse
Well the TyTN is the very first HTC branded smartphone lauched......definitely HTC!!
And it definitely does not work!!
Sorry for the misunderstanding: I thought that Vittore had troubles with Samsung only and not that he also tryed with a Tytn II
I perfectly know Tytn II is an HTC device and as matter of fact it works to me and to the two first users who answered this thread: KILRAH and XCESSPDA
When I activate a call via Fring now with my phone (with WM 6.1 using the standard official HTC ROM) the default is the internal earpiece. And if during the call I press the "switch" button, the audio passes from the internal earpiece to the external loudspeaker and viceversa
And other users are using successfully this new release
So it would be interesting investigating what the specific problem is to whom has troubles. Are you Vittore using the same ROM? Have you checked all the volume controls in the phone and in the Fring application?
To me I can confirm that now Fring is perfectly working on Tytn II.
dengi_it said:
To me I can confirm that now Fring is perfectly working on Tytn II.
Click to expand...
Click to collapse
You're mixing again, he tryed with a TyTN, not a TyTN II
So, different device, different hardware, possibly different behavior.
But he has to take some too, this is the TyTN II forum so wouldn't be the right place to post it, like we can see it gets people confused
Oooops,
thank you very much for your clarification, Kilrah!
kilrah said:
You're mixing again, he tryed with a TyTN, not a TyTN II
So, different device, different hardware, possibly different behavior.
But he has to take some too, this is the TyTN II forum so wouldn't be the right place to post it, like we can see it gets people confused
Click to expand...
Click to collapse
I'm sorry......Ii know I'm not in the right place....but it is so difficult to get info from fring and their forum....
I'm going away!!
works for O2 Stellar official rom WM6.1
Just to confirm that it works (can hear the Skype call from the earpiece instead of the loudspeaker!) for me with an O2 Stellar running official RUU_Kaiser_O2_UK_3.29.206.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe rom
Thanks for the update! Without this thread, I would probably have abandoned Fring! :-D
first voip software that works flawlessly
I have this problem with my htc kaiser:
When the phone is under edge or gprs network and I received (or send) a calling, the phone switch off. (scuse me my english).
If I'm under 3g or Hsdpa I can make and receive calling regulary.
I tryed a lot of radio (1.71-1.70-1.65) and rom (also originaly) but the problem is the same.
Can somebody suggest me a solution?
ITA.
quando ricevo o invio una chiamata telefonica sotto rete gprs o edge il telefono si spenge da solo. Funziona invece regolarmente sotto rete 3g o Hsdpa.
Ho provato tante rom e radio, qualcuno ha da suggerirmi una soluzione?
sounds like a battery problem, try replacing
sounds like a battery problem, try replacing
How does that sound like a battery problem?
It doesn't work on the slower less battery aggressive data, but does work just fine with the power draining 3g..
This sounds like a problem people have had before, something that has been posted a few times.
here are some threads that may help.
http://forum.xda-developers.com/showthread.php?t=366217&highlight=dropping+calls
http://forum.xda-developers.com/showthread.php?t=360490&highlight=dropping+calls
http://forum.xda-developers.com/showthread.php?t=442446&highlight=3g+calls
http://forum.xda-developers.com/showthread.php?t=547710&highlight=3g+calls
same happenin for me.. i just ordered a battery for my phone to replace it.. lets see what will happen next..
mystik_khmer said:
same happenin for me.. i just ordered a battery for my phone to replace it.. lets see what will happen next..
Click to expand...
Click to collapse
me too. I wait the battery than i post the result
meto o same problem i ordered 2800Mah with back door today from 4u-kidi.com
solved with battery replacement I'm too happy
Dispositivo: HTC Tytn II Italia
Rom: Originale-25.83.40.02
Radio: Originale-1.65.17.56
Operatore: Wind
unfortunately I do not speak English, translator
I do not know if it's a conscious failure, before the SW is completely open (green screen written 6.1) can be seen below from screen to open something that you see are the notes for registration, telephone letters (C, d, e, f ) and the keyboard and all buttons unresponsive, sometimes does not meet even the power button from standby.
Sometimes having no battery for some time has begun to work well for a few hours. I noticed that when it does not work does not meet even the bootloader (camera-power-reset)
In December I had sent for service and warranty, but having been without a battery I have sent and wrote''no defect''.
The defect exists and is unusable after a while because of all crashes, time to start no problem everything works perfectly.
thanks
-------------------------------------------
Non so se è un difetto consciuto, prima che il SW si apra del tutto (schermo verde scritta 6.1) si vede sotto partire qualcosa che a schermo aperto si vede siano le note di registrazione, telefono con lettere (c,d,e,f) e la tastiera e tutti i tasti non rispondono ai comandi, a volte non risponde nemmeno il tasto di accensione da standby.
A volte tenuto senza batteria per un po di tempo ha ricominciato a funzionare bene per qualche ora. Ho notato che quando non funziona non risponde nemmeno il bootloader (camera-power-reset)
A dicembre lo avevo mandato in assistenza e garanzia ma essendo stato senza batteria me lo hanno rimandato e scritto ''nessun difetto riscontrato''.
Il difetto esiste ed è inutilizzabile perchè dopo un po si blocca del tutto, quando in avvio non presenta problemi tutto funziona perfettamente.
grazie
I added the video file
--------------------
Ho aggiunto il file video
I also have this problem. I have disassembled the phone and used a compressor to clean it. No improvement I also disconnected the qwerty keyboard which made no difference
Now under pressure after data with HSDPA (battery very hot) has begun to work
but I do not know how long continue
garand_it said:
Now under pressure after data with HSDPA (battery very hot) has begun to work
but I do not know how long continue
Click to expand...
Click to collapse
returned the defect
sometimes i can no longer turn on to stantby, reset or take out the battery
Some issues about it.
I'have the same trouble since I instal an Spanish version of WM 6.5. At the beginning works fine, but then, when I told to A. Sync, not do nothing except connect to device, my contacts dessapear from WM contacts, and the camera stop working at some time from that; may be, and I'm guessing, could be the problem when you mix those factors, the foreign language, conecting without sync and having the PC conected to the WEB. Could it be?.
My conf.
This is my conf:
Windows Server 2003 R2.
Active Sync v4.5
My mobile (this program causes errors sometime, it seem that it try to write to the protected memory of W2003, and give WEP problems).
Windows Mobile INT2MIL WM6.5 ROM 0C0A V1.0 23071.
HTC AT&T 8925.
I hope this help to fix errors in the future.
michael_llewellyn said:
I also have this problem. I have disassembled the phone and used a compressor to clean it. No improvement I also disconnected the qwerty keyboard which made no difference
Click to expand...
Click to collapse
anything new? have resolved the defect TyTN2?
garand_it said:
anything new? have resolved the defect TyTN2?
Click to expand...
Click to collapse
I was again playing with the data hsdpa when suddenly has 4 sounds event / error and started to work well.
I decided, HTC has not yet replied (pretty seriously, I think that if I can not buy more HTC) returns as soon as I open the kaiser.
Anyone with a proximus SGS got the froyo update yet? I used one click lag fix, and kies says it has an upgrade for my phone, but then it gives me following warning:
PDA:JM2/PHONE:JM2/CSC:JM1
Latest version already installed
Update just not out yet or wil removing the lagfix enable me to update?
Froyo for Belgium is not available... yet. Most likely it will be released next week.
Btw, can u post the original register values from regedit?
ProductCode, SoftwareRevision, etc...
Could be in handy to flash over Kies!
Thanks
i do have proximus sgs 16gb with mobistar provider still no update yet.
Product code for SGS Belgium: GT-I9000HKAPRO
HELLO
How do you feel about it? is also valid for PROXIMUS ?
Bingo ça marche en cherchant sur les forums et j’suis pas un pro, et j’suis sous SFR (j’fais pas de la pub, c’est pour la sous couche)
brancher le tel
lancer kies (j’ai la version 1.5.1.1.xx)
Mise à niveau ….. puis quitter (pas kies juste l’update)
Lancer Regedit cBingo ça marche en cherchant sur les forums et j’suis pas un pro, et j’suis sous SFR (j’fais pas de la pub, c’est pour la sous couche)
brancher le tel
lancer kies (j’ai la version 1.5.1.1.xx)
Mise à niveau ….. puis quitter (pas kies juste l’update)
Lancer Regedit changer les clés :
HKEY_CURRENT_USER … Software….Samsung….. Kies …DeviceDB
– HIDSWVER … en : I9000XXJF3/I9000SWC/I9000XXJF3/I9000XXJF3
– ProductCode … en : GT-I9000HKAXEE
relancer mise à niveau …………. et ça marche, j’ai rien perdu sauf les appli SFR (Oups à koi ça sert ,,, )) )hanger les clés :
HKEY_CURRENT_USER … Software….Samsung….. Kies …DeviceDB
– HIDSWVER … en : I9000XXJF3/I9000SWC/I9000XXJF3/I9000XXJF3
– ProductCode … en : GT-I9000HKAXEE
relancer mise à niveau …………. et ça marche, j’ai rien perdu sauf les appli SFR (Oups à koi ça sert ,,, )) )
Infos
Here are the default values for the belgian Galaxy S from Proximus
Belgium / GT-I9000HKAPRO / I9000XWJM2/I9000PROJM1/I9000XXJM2/I9000XWJM2
I hope they're gonna release froyo soon so i could get at least one official rom for the phone (yep forgot to backup original)
GT-I9000HKAPRO on JM2 still no Froyo update ! (provider LUXGSM)
Was the same for me a few weeks ago, but I used the old version of Kies to force update mine to Froyo 2.2 which at least gets rid of the Proximus crap. No idea why it's taking them so long.
Upgrade to Froyo done
Yesterday evening new version of Kies: 1.5.3.10103.102
This afternoon upgrade to Froyo:
Productcode: GT-I9000HKAPRO
Software version: I9000XWJPA/I9000PROJP2/I9000XXJPP/I9000XWJPA
All home screens empty, no other problems so far.
Keep our fingers crossed
Yes... Updated yesterday in Luxemburg through Kies.
GT-I9000HKAPRO to I9000XWJPA/I9000XXJPP/I9000XWJPA
(Provider is LUXGSM)
Flash 10.1 and Youtube installed and work.
GPS now locks < S/N 20. (Orange bars in GPS test)
Hi everyone!
I could update to froyo this morning in Belgium.
Had to update Kies first in order to make the firmware upgrade show up.
Everything worked fine, data is not erased, you just have to reconfigure the home screens. I recommend a complete Phone memory backup nevertheless, since you never know. My Galaxy took 5 mins to finally reboot after the upgrade, so don't worrs if it takes some time, it will finally run smooth
Nevertheless, I use a Phone bought in Luxembourg with no branding and for full retail price, a part fro the Hello Proximus app which to my displeasure was still installed after the update, although i am and have never been a client of Proximus.
My network is BASE in Belgium and TANGO in Luxembourg.
Btw (out of subject but nevertheless), does anyone know how to get rid of that Hello Proximus app or at least how to close it after it's been launched? This app runs in Background even after a restart of the phone and i want to make it stop and dissapear. Any tips?
Hi,
Most phones sold in Luxemburg are from Belgium and are branded i.e Base or Proximus.
You can get rid of the *Hello" application by moving it to trash and immediately thereafter stop the service. You may have to try several times, but it works.
After a reboot however it is back again.
After the update my new email application is very slow and laggy, so I may have to do a factory reset and reinstall all aps. from backup.
The GPS is still a problem sometimes, but at least it now locks on satellites with S/N below 20 (Orange bars)
Braindigger said:
Btw (out of subject but nevertheless), does anyone know how to get rid of that Hello Proximus app or at least how to close it after it's been launched? This app runs in Background even after a restart of the phone and i want to make it stop and dissapear. Any tips?
Click to expand...
Click to collapse
I'm told you can remove it using Titanium Backup if your phone is rooted, but I got rid of mine because I used an older version of Kies to install Froyo from another region
Well that's a shame because I thought that when I pay the full price for a phone I'll at least get an unbranded version. This is worth a complain for me, because I don't want to pay so much money to let my phone decide which apps I'm running on or loose warranty by rooting it, that's the reason from staying away from Iphones..
Sorry for getting off topic.
Froyo up and running fine. I don't have battery issues some people have after the update. I am even impressed about how much playing around with wifi, 3g, display and 3d games the battery can endure and still have days of standby time left.
For the details: Of 8 hours, i was surfing 1h on wifi, 1h on 3G, playing a 3d game for about an hour while listening to music, listened to music all alone during 3 hours, had a total of 30 mins of voice calls, the rest on standby.
Result: Battery down to 58%. I think this is even greater than before the update!
On the other hand i feel that the general performance of the phone in matters of reaction speed (especially when typing on the virtual keyboard or using the two buttons below the screen) has decreased. It's still fast and all, but more often than before you'll have to wait 1 sec or two before the phone reacts to your input. This might also be due to the fact that I have installed a lot of apps recently of which many run threads in background without the user knowing about it. This uses Ram and might decrease performance.
2 Things to check after the update:
- Wifi->advanced settings->Wifi sleep is now set the "never" by default. This will drain your battery a lot, so you better switch it back to "when display is off" again.
- Discharge your battery completely once the update completes and recharge it fully an AC (not USB) while the phone is off. Some battery problems occur because of the battery indicator being set incorrectly after the update.
Touchke said:
Yesterday evening new version of Kies: 1.5.3.10103.102
This afternoon upgrade to Froyo:
Productcode: GT-I9000HKAPRO
Software version: I9000XWJPA/I9000PROJP2/I9000XXJPP/I9000XWJPA
All home screens empty, no other problems so far.
Keep our fingers crossed
Click to expand...
Click to collapse
Has someone an csc (cwm or odin) of Belgian Proximus (PROJM1 or PROJP2) ?